I am still getting redirected to various web sites when using Safari. My PC is not affected but my I phone and I pad are. I have reset my router and changed my admin name and password. I am still being redirected.

Chances are you mis-typed a character in the Wifi password and the devices saved that information. Now whenever you try to connect the device refers to the wrong password and the Jetpack does not accept your connection. Tell your devices to forget the wireless connection and start over.
Once you enter the proper WiFi credentials the Jetpack will allow you to connect.

Similar Messages

How do I change the admin name and password on my iMac?

How do I change the admin name and password on my iMac? It's been about two years since I've done that and I've totally forgotten how to. Your help is appreciated!

Hi Haldane, and a warm welcome to the forums!
Changing the name can be dangerous, use ChangeShortName 10.4 only...
http://www.macupdate.com/info.php/id/16620
Many way to change the PW then, the Accounts Pref Pane, unlock the Lock, click on change Password.

HT204291 Does anyone know why when streaming a movie from my iMac the screen on my tele goes grey but I still get audio. It only happens when using the DVD application on the mac. iPhoto streams fine.

Does anyone know why when streaming a movie from my iMac the screen on my tele goes grey but I still get audio. It only happens when using the DVD application on the mac. iPhoto streams fine.

You are prevented from Airplay mirroring certain things like DVD content as the material is usually protected so you get a checkerboard type display. I think there is a theoretical risk that the Airplay stream could be intercepted and the protected video copied, albeitin lower quality.
Apple may be being cautious or are required to do so with the DVD player app by movie studios/licensing authorities. It makes no sense to the average consumer who is just trying to send their purchased DVD to the TV via the computer and AppleTV.
Playback in something like VLC should work - not tried it myself but others have commented it doesn't have the restriction.

Just Installed Firefox 6.0.2 And I'm Having Many Problems On Some Web Sites When Using Firefox:

-When I click on a picture on some sites it will go to the next page with a large view of the picture and then when I go back one page to do the same with another picture (or even the same picture) nothing happens.
-Videos don't show up or on some sites the videos do show up and work but you can't make them full screen. (YouTube works fine).
-Sometimes I have to click "Reload" to get my saved codes to show up.
-It won't let me log onto some sites unless I right click where it says "sign in" and click "open link in new tab".
-In some Forums the tool bars, smileys, etc. don't work when using Firefox or IE9 and they worked before with IE9.
-Some of my letters when viewed with IE9 are now in some kind of code (maybe html?).
I never had these problems before when using IE9 alone!
Java was updated before I installed Firefox and I installed the Adobe Flash Player 10 plugin right after installing Firefox. My OS is Windows 7 64-bit.
Please Help. Thank You

Clear Cookies & Cache
* https://support.mozilla.com/en-US/kb/Template:clearCookiesCache
Clear the Network Cache
* https://support.mozilla.com/en-US/kb/How%20to%20clear%20the%20cache#w_clear-the-cache
Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Check and tell if its working.

How to control pop ups on a per web site basis using Safari 7.0.1?

rMacbook Pro late 2013 maxed out with the 512gb SSD.... 16gb ram, nVidia GT750m, SuperDrive, and Lacie external 1Tb Rugged Thunderbolt/USB 3.0 for Time Machine and 300GB for DATA out of it.
Having been a windows user all my life I am generally real real pleased with this notebook. actually spoiled for first my first notebook after years of big money custom built desktops from Falcon Northwest and Puget Systems. For using my Nikon D800 they rock other than that these Haswell rMacbook Pro work for me
Have to use bootcamp and windows 7 64 bit professional for 2 pieces of software That are needed if one wants to continue a life long job with GM.
So we take updates, tests, webcasts, etc. and I prefer to do those tasks on the Mavericks 10.9.1 side but find on Safari 7.0.1 you cannot control popups on a per website basis. On wondows I use IE 10 which I like and always have and while open to exploits safe computing practices can keep that under control.
So as I learn Apple and all its software I was hoping there may be an extension or app that will give user control of popups a little better than the default of either all on or all off? Does anyone one know of one? Google wasn't much help maybe I used incorrect search term but I doubt it.
Thank you,
Chevysales

There are some Safari extensions that can block JavaScript by domain, but you'll have to search for them.

Getting URL parameter in Web Dynpro when using iViews in netweaver portal

Hello Everybody,
I'm having the following issue:
I created a WD-Application which would be accessed directly via URL with some parameters.
Getting these parameters works fine using the logic from the following link:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/45/2233b60c21072ce10000000a155369/frameset.htm
Now I want to implement my WD-Application into the netweaver portal.
My colleagues customized it that far, so that I can access the WD via a portal-link.
The only thing is, that the logic getting the URL parameters from above does not seem to work in this context any more.
Do I need different coding getting the parameters from the portal URL or is this a matter of missing "portal-customizing"?
Any ideas in this matter are kindly appreciated.
Thanks in advance and regards,
Marc

Hi Marc,
I'm doing the same and it works fine.
Here is my coding:
DATA: lt_url_parameters TYPE tihttpnvp.
data: ls_url_parameters type line of tihttpnvp.
* Read URL Parameters
wdevent->get_data( EXPORTING name = if_wd_application=>all_url_parameters
                     IMPORTING value = lt_url_parameters ).
read table lt_url_parameters into ls_url_parameters with key name = 'MODE'.
if sy-subrc = 0.
    case ls_url_parameters-value.
      when '1'.
      when '2'.
   endcase.
endif.
Check the following:
1.) are you using the event handler "HANDLEDEFAULT" of your WINDOW to get the url parameters?!
2.) in the portal iview with your wd application, the property "Application Parameters" has to be filled (in my example: mode=1)
If you need the value in the init method of your first view, you can store the parameter in an attribute of your component controler and read it in your view.
Regards,
Andreas
Edited by: Andreas Leis on Jul 14, 2009 11:05 AM

I don't recall always having to enter admin. name and p/w when doing updates. Is this req't only for certain software. I am a bit paranoid now with the Mac Defender lurking about.

When completing the software updates I can't remember always having to enter administrator name and password. Maybe it's just been automatic on my part but now I rethink the process when I am asked to enter this info since the Mac Defender malware became an issue with Mac. Just wanted to know if this procedure occurs with all software updates or is it selective based on the type of update? This time is concerned Airport. Thanks for any insight.

Are you running as an Admin User or non-Admin? ie. have you set your Mac up with multiple user accounts - one as an Admin and one as a Standard user?
For security, you are better off having an Admin user account that has Admin privileges and a Standard user account that you use from day to day with standard privileges. When you install system updates you will be required to enter an Admin name and password, and any software that needs access to the system will require an Admin name and password, but anything that you install just for your user account that doesn't require total system access will be able to be dragged and dropped into your Application folder as per usual.
MacDefender runs in a web browser - that should be a huge red flag! If you see a warning when you are running Safari or another web browser close the browser window or Force Quit it. (under the Apple Menu => Force Quit...) In Safari Preferences untick Open "safe" files after downloading. (It will prevent an installer from automatically launching if something nasty is downloaded to your machine.) MacDefender and its variants attempt to trick people into installing stuff that will compromise their system. If something pops up unannounced on your machine that you didn't download, close it and delete it.
This article goes into depth about the MacDefender Malware:
http://rixstep.com/2/20110610,00.shtml
The salient points are summed up in the "Recapitulate" section at the bottom of the article: It's a bit Hipster Geeky.
"To Recapitulate
As recounted elsewhere, the Mac Defender attack is a well thought out attack that may have taken months to get together. The first step was to compromise websites of eejits, hack their FTP accounts, and upload dynamited files to their servers.
Then followed the Google whacks which led to people clicking on links they'd provided at the sites they'd hijacked.
And then finally they uploaded Mac Defender so people would get hit by it. And the purpose of Mac Defender is to scare you into thinking you're infected so you pull out your credit card.
Then the hackers run away with your credit card info and buy mink coats and chinchilla coats or whatever they want.
But staying clear of Mac Defender is really easy and doesn't require any AV software.
Don't ever open anything you didn't want to download.
Turn off JavaScript when accessing any Google Images site.
Make sure you don't have Safari set to automatically open downloads."
I'd add, keep your software up to date. Especially Adobe's Flash Plug-in as this is no longer supplied in system updates by Apple and could become an attack vector in the future. Always download software from reputable sources - ie. when downloading the Flash plug-in, get it from Adobe directly - don't follow a link from a website that tells you your version of Flash is out of date.
Enable your Firewall in System Preferences => Security => Firewall. Click on the Advanced button and Enable Stealth Mode too.
Also under:
System Preferences => Security => General.
Disable Automatic Login. Require a password to unlock each System Preferences pane. Use secure virtual memory. Automatically update safe downloads list.
Educate yourself.

My Mac will not automatically connect to a web site when I double click

My Mac will not automatically connect to a web site when I double click. The Icon blinks but nothing happens. This happened once before but I don't recall how it was fixed. I can often (but not always) open the site by using "open with Safari.app(default)

Firefox 3 will not run on OS X 10.3.9, it requires at least 10.4
Try one of these browsers to see if you can access Hotmail - [http://www.seamonkey-project.org/releases/seamonkey1.1.19/ SeaMonkey 1.1.19] or [http://caminobrowser.org/download/ Camino 1.6.11]

Lost 9100EM admin name and password

I stupidly lost my admin name and password on my Westell 9100EM. Is there any way to reset the password? I believe that the name is still 'admin". If not, how do I reset the 9100EM to factory defaults and does that change anything other than the changes that I made? Thanks in advance for your help.
Solved!
Go to Solution.

quick google search pulled this : http://www22.verizon.com/NROneRetail/NR/exeres/EECBA78B-B884-4DA7-97F7-B06138E667DB.htm
Usually when reseting it resets back to factory defaults so be aware.

My HP office jet 6500 printer is stuck on pause. I do not have an admin name or password as it is a wireless printer and I never had to set one up. It keeps asking me for admin name and password...

My HP office jet 6500 printer is stuck on pause. I do not have an admin name or password that it keeps prompting me to give, as it is a wireless printer and that info was not required when we set up the printer. I have checked all diagnostics and connections and they are all good/passed. I am so frustrated!!! This has never happened in the past.

What is asking you for an admin name and password? What does the dialog say, exactly?
What model iMac are you using, and which OS version?
If it is earlier than Lion or Snow Leopard, try deleting the printer and adding it again as explained in this document
http://support.apple.com/kb/TS3140
Otherwise you can "reset the printing system" as explained here
http://support.apple.com/kb/HT1341
and here
http://support.apple.com/kb/TS3147
Download the latest drivers here (Lion, Snow Leopard)
http://support.apple.com/kb/DL907

Icloud still shows my old email address when I try to enter, asking me for a password I no longer have. I need to change my email address and password in ICLOUD but I can't find a way to do it. Any ideas? Thanks.

icloud still shows my old email address when I try to enter, asking me for a password I no longer have. I need to change my email address and password in ICLOUD but I can't find a way to do it. Any ideas? Thanks.

Logout (System Preferences>iCloud) then login with the new address and password.

Admin name and password says invalid EVERYTIME

hi, i'm trying to download the trial for photoshop, and when i wanted to start the set up, it said +'type an administrator's name and password to allow setup to make changes'+, so i typed in the admin name and password that i type in when i'm logging in (when turning on the macbook) and
it just keeps saying its invalid. ('sorry, you entered an invalid username or password')
the same happened with everything else i tried to download.
PLEASE HELP

You've undoubtedly "lost" you admin account. To make sure open System Preference->Accounts and look at your account in the left corner and it should say "admin" below it. If it doesn't you've lost it. It's a Leopard bug.
Have a look at this Apple KB article for regaining those privileges.

Admin name and password

I really don't know what's the deal, but a friend of ours is working to get our wireless internet working on the laptop. Unfortunately, we have nothing that tells us what our admin name is, or what our password is to get to the IP site to get it working.
Is there a number I could call?

If your problem is all about a linksys router then you better call their tech support line 8003267114 so you could explain the real deal..or if you can give tmore details of your prob i would probably able to help you.

Admin name and password not working

I recently upgraded to leopard and I just tried to install a printer and it asked for an admin name and password. I only have one account on my powerbook. My name and password work to unlock the computer when waking from sleep but is being rejected in the system preferences panel. I know I have the name and password right and that I am the only admin account. Please help.

At the top of the Leopard discussion pages, there's a yellow box, suggesting that you read one of Apple's "known problems and workarounds" documents. This problem is one of those discussed.
Doug

How can i recover my admin name and password from my i mac. i could not get through to it.

how can i recover my admin name and password from my i mac. i could not get through to it.

What do you mean "I could not get through to it" Are you trying to login remotely?

I am still getting redirected to various web sites when using Safari. My PC is not affected but my I phone and I pad are. I have reset my router and changed my admin name and password. I am still being redirected.

Similar Messages

Maybe you are looking for