I am testing a Sony a7r, shooting RAW. I can't seem to import the files (which are .awr) into my Lightroom 4. Anybody know what options I have? Thanks!
I am testing a Sony a7r, shooting RAW. I can't seem to import the files (which are .awr) into my Lightroom 4. Anybody know what options I have? Thanks!
Support was added by Adobe for this camera model in LR 5.3 and ACR 8.3. see the link below.
Camera Raw plug-in | Supported cameras
You can download the latest trial version of LR 5 the current version is 5.7.1 and use tor 30 days.
The other option is to download the latest Adobe DNG Converter (version 8.7.1) for free and convert the Sony .arw files to dng format and they will work fine with LR 4.
Make sure you retain the original copies of the .arw files.
Similar Messages
-
My imac is doing strange things:
-delaying between users: when closing session it goes to blue, then takes a while to appear users signin box, and then wont recognize mouse command to enter until a couple of minutes later... then everything seems alright until....
-it gets stuck between things, the rainbow wheel appears and its just delays there forever....
-and every now and then the mouse starts flickering and bouncing wildly onscreen.
I ran the appel hardware test and it detected an error:
4MOT/4/40000003:HDD-1233
Does anybody know what that means? HELP!WZZZ answered about where to get iStat. And do check the SMART status. If it is an overheating problem due to a fan or logic board problem, your hard drive is possibly cooking itself to death. If so it isn't a faulty hard drive even though the hard drive might fail. So assuming it's a temperature problem, even if you are able to repair things on the disk with software, that is working on symptoms, not causes. I could be wrong however.
RE: AppleCare: Your iMac came with one year of AppleCare (Apple's warranty program), but within the first year you can buy 2 more years. You have to extend by the one year anniversary of purchase of the computer. Your 10,1 is too old to still be in the first year, and since you asked what it was, I'm sure you don't have it. Bottom line meaning is that whatever this problem turns out to be, you'll have to pay for it. Unless there is something like this. It is for 2011 iMacs with certain Seagate drives. You can put in your serial number for fun, but it looks like yours is too old. Lastly, some people have had Apple help them anyway if it is just out of warranty, but many have not. Your machine is one of these. Type in 10,1 in the search box. Is there an Apple Store near you? Just b/c it's out of warranty doesn't mean you shouldn't have it looked at by Apple. But no one here can say at all what Apple will or will not do.
Hope you get it taken care of! -
I shoot on a canon 5d mk11 and I record my audio on an external device yet when I open up my footage in final cut pro x I can't find my external audio files only the ones attached to the clip which are off the camera mic
What device?
What format?
How are you importing it?
Can you find the external audio with Finder?
Where is your destination file when you import it?
Andy -
Can't seem to change the Document Properties > Advanced > Reading Options in a Form that was created in Adobe LiveCycle. This option has been "greyed" out - anyone know how to update this to English so I can pass Accessibility Testing?
LiveCycle forms use a very different approach to create a PDF form than Acrobat and that approach makes many features for processing PDFs non-functional.
You might want to ask this question in one of the LiveCycle product forums. -
I have just bought a Panasonic Lumix compact camera. Aperture and Preview can't open the RAW files from this camera. Panasonic recommend downloading 'SYLKPIX Developer Studio SE' to save RAW file formats.How can Aperture and Preview read the files?
Either use 'SYLKPIX Developer Studio SE' to develope the RAW files and to save them in another lossless format like TIFF, or try if Adobe's free DNG Coverter can convert your Lumix RAW files to dng. Then import the dngs. This way, your files will still be RAW files. This works (most times) for my Lumix FZ28.
Adobe DNG Converter 8.3 http://www.adobe.com/support/downloads/detail.jsp?ftpID=5695 -
HT201257 Does anybody know what hardware test error code this is 4SNS/1/40000001: TCOH -1.704
Does anybody know what hardware test error code this is 4SNS/1/40000001: TCOH -1.704
Trying to track down fast running fan that will not reset and this error came up.only apple techncians have access to what those codes mean. It is sensor related, but as it is a hardware problem, you need to bring it into an Apple store or AASP to have it correctly diagnosed and fixed.
-
New Nikon D750:
Lightroom 5.6 does not recognize nef (RAW) image files generated with the new Nikon D750: who can help here or knows what to do? Thanks, PeterLR 5.6 doesn't support the new Nikon D750. You have to wait to the next update.
You con also install the release candidate of the DNG converter and convert your NEF files to dng.
http://blogs.adobe.com/lightroomjournal/2014/10/1366.html
Axel -
I can't seem to enlarge the text on my news apps SI and The New Yorker. Yet, I can touch and expand the test on my mail and websites. How come?
I heard someone once talking about the NY app - it's the best selling one in the publisher's line (Conde Nast?), and they deliberately kept it as simple and "untechy" as possible - the closest in their line to the actual print edition. The discussion was on how it was surprising that the magazine with the least amount of "bells and whistles" was their best seller... and a speculation that it was because it was so simple and uncluttered. Perhaps their decision to remove pinch & zoom was related to that idea.
-
Sony Nex 6 Raw image can't import to Aperture 3.4.5
Hi everyone,
I am not new to Aperture... but it is my 1st time trying to use my Sony nex 6 raw with aperture.
but sure what I did wrong.
here are my info
OSX 10.7.5
Aperture 3.4.5
Sony Nex 6
firmware 1.02
I have selected import, with SD card directly plug into the SD card reader on my iMac.
aperture was able to see the raw files, it does allow me to import.
but after imported, i click on the imported file, it shows "unsupoorted image format"
please help
thanks everyone!I have selected import, with SD card directly plug into the SD card reader on my iMac.
aperture was able to see the raw files, it does allow me to import.
but after imported, i click on the imported file, it shows "unsupoorted image format"
Have you tried to reprocess the raw after importing? Select the new import and use the command
"Photos > Reprocess Originals" -
How do I rank or rotate a raw and jpg version (combo?)of the same photo with 1 click in Lightroom 4?
Hi, i am new to this forum
I did some searching, but could not find the answer.
I only make stacks of exactly the same photos, but with different formats, mostly 2 jpg versions and a raw. If i change photos further, i unstack that photo, to see the different photos right away.
So, i always want to apply changes to all the photos in a stack, because all basic versions have the same rank, should have the same rotation, and other exif data that i change.
Does anybody know how to always change all photos in a stack in Lightroom?
Thanks!Hi,
If you shoot RAW+JPEG, there is a spechial option in LR (Preferences>General>Treat JPEG files next to raw files as separted photos) which teats both as one item (unchecked).
All your metadata change is appliled to both, but you do not see the JPEG in LR.
I started with this setting on. But after a while, I recongnized, that I do not want the JPEGs anylonger. Why? Because I did two things:
1. I tried to develop the RAW in a way it looks like the JPEG. Well, O.K. This is only usefull for a very limited number of images (low light, high light) where you have to rescue information from the RAW that is lost in the JPEG. For all other images, it is easier to use the JEPG
2. I developed the RAW in a way that it looks different from the JPEG. I did so, because I want to show this version to others, not the JPEG. Therefore I deleted the JPEG.
There is no way in LR to apply a function / preset to a stack. Only the marked images are affedted. This is the problem with stacks. E.g. you go into a folder with stacks, select all, export all selected and notice, that some images are missing (the ones in the collapsed stack). Every time I got into a folder with stacks and do not want to organize the images, I select "Expand all stacks" from he menu. -
Is there a PS setting where it can read my Canon Mark 3 5D's monochrome setting so that the files will also appear in the same monochrome structure (instead of appearing in colour as it is now when i open in PS, not even monochrome)? Or do I have to change from RAW each time to Monochrome within PS (even if I have set up for Monochrome in my 5D)?
1. Basically I am taking photos with a monochrome setting with my 5D and the screen shows monochrome.
2. when i import this onto my computer and open with PS, it opens in colour.
3. when I change this to Monochrome in PS. (It cannot read my monochrome setting with my preference of the greyscale mix when I viewed it on my 5D)
4. my question is: is there a way so that PS can read the monochrome setting from my 5D and display the same monochrome setting as my 5D instead of a different one from PS.
Lilyyou need camera raw 6.7 or better.
i don't know what version of ps you have so i can't say if it can be updated to use that, but update anyway.
pre cc updates: http://www.adobe.com/downloads/updates/
cc updates: http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
cc 2104 updates: http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html
if you can't update your cr sufficiently, use the dng converter. DNG Converters:
Win
Mac -
I rented a Nikon D600 & D610 and CS5 cannot open the RAW files, i do not have any issued with my D700 RAW files. I am getting this error message -
Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
Please visit the Camera Raw help documentation for additional information.
Can anyone please help?yellowmledbetter wrote:
Sorry, I am on a MAC. I downloaded the link you provided and it's giving the same error message as above. Running CS5.
The error message you gave is from Camera Raw. I thought you said that DNG Converter didn't work?
The link I gave you is an article on getting your raw files to open in Camera Raw. Did you read it? I lazily gave you the link because this is one of the most common problems in this forum, and I get tired of saying the same thing over and over again. I could break it down for your specific case, but I was hoping you could read through the article and work it out for yourself.
But, here goes:
Your cameras are newer than your raw converter, so it won't understand them.
CS5 comes with Camera Raw 6, which can only be upgraded as far as 6.7.1. You can find out which version of Camera Raw you are running in three ways: in the settings title bar (Cmd-K), in the plug-in title bar (press F to start/stop full-screen mode to reveal the title bar), or Photoshop's Help menu (About Plug-ins).
Downloading raw files from newer Nikon cameras with old versions of Nikon Transfer will actually make them unreadable in Adobe software. They can be fixed with a free utility. Again, it's all in the linked article. You should be using up-to-date Nikon Transfer, or Adobe Photodownloader to avoid this problem.
All being well, you have good raw files on your computer. You can convert them to dng using Adobe DNG Converter. IF you are on OSX Leopard or Snow Leopard, you CAN'T use the latest version, because Adobe stopped support. But, if you ARE on a later OSX, you can download DNG Converter 8.6.
DNG Converter is designed to convert FOLDERS of raw files at a time. You select a folder of raw files, and tell it to create DNG copies. BUT, you have to set up the converter before you start using it...
If you load up DNG Converter, you'll notice a button labelled "Change Preferences". Clicking this, you'll see the first option is "Compatibility". Here, you must select the appropriate setting for the version of Camera Raw you HAVE (see above). If you can't work this out, just pick "Camera Raw 5.4 and later". THEN pick a folder of raw files and convert them to DNGs.
All the above is already in the article, but I gave you a personalised response. If you still can't get it to work, please give us more than one sentence. Tell us exactly what you tried, and describe exactly what happened. Which version of OSX you're running, what device and software you downloaded your raw files with, how you used DNG Converter, and so on.
I really should be in bed. -
I can't seem to import RAW files from my Nikon D80....
I am just starting to investigate the world of RAW images. I have been successfully using iPhoto to archieve and process my Jpegs that I import into iPhoto6. When I try to import the RAW.NEF files from my D80 iPhoto gives the following error message.
Unreadable file: 1
The following file could not imported:
/DSC_0002.NEF
Any thoughts?
Thanks in advance for any help,
S_Mac
17" Flat Panel iMac Mac OS X (10.4.8)You need to install the update that lets your iMac recognize the RAW format of your D80 files. The D80, Rebel XTi are too new for 10.4.8 so Apple offers an update that adds support for their RAW files:
http://www.apple.com/support/downloads/digitalcamerarawsupportupdate101universal .html
(Intel)
or
http://www.apple.com/support/downloads/digitalcamerarawsupportupdate101ppc.html
(PPC) -
I am trying to download the Adobe Camera Raw 7.1 upgrade for CS6. The files will not unzip.
I am trying to download the Adobe Camera Raw 7.1 upgrade. The zipped files download, but when I try to extract the zipped files, I get an error message saying that there is already a file with the same name as the folder name I specified, and that I should specify a different name. The four zipped components are META-INF [Folder], payloads [Folder], AdobePatchInstaller [Application file\, and payloads [File]. Evidently, there is a conflict between the payloads folder and the payloads file, but I cannot be sure. All filenames came from the download.
Are you using CS6 applications ? Camera Raw 7.1 is only compatible with CS6 applications. Try this as mentioned on http://www.adobe.com/support/downloads/detail.jsp?ftpID=5391
For Photoshop CS6 and Creative Suite 6 customers, we recommend that you install Camera Raw 7.1 by selecting Updates from the Help menu and follow the on-screen dialogs to download and install the latest available Camera Raw update. You can also click the link below to download an installer that replaces the existing Camera Raw plug-in with Camera Raw 7.1 for all CS6 applications.
Thanks
Nikhil -
I uploaded and edited my RAW image, clicked 'Save As', and changed the file type from .psed to .jpg.
I edited my raw image in Photoshop CS6, selected 'Save As', and changed the file type from .psed to .jpg. I also selected 12 and large file when the window popped up, concluding my 'saving as'. My computer does not recognize the file type and won't open them. Can someone help me? Thanks!
When naming files, stick to the letters of the ENGLISH alphabet, numbers and underscores. Do not use illegal characters like apostrophes, commas, asterisks, ampersands, hatch or pound signs, diacritics or accented characters, slashes, etc.
While the period (dot) is not an illegal character per se, your file names should have only one period and that should always be followed by the file type extension.
EDITED typo: se
Message was edited by: station_two
Maybe you are looking for
-
Mac Mini mini-display to DVI issues
I have a late 2012 Mac Mini running OSX Mavericks, and I am currently using an LG Monitor over HDMI. I want to run a second Monoprice tablet monitor from the mini-display using a DVI cable and an Apple mini-display to DVI adapter. Every time I plug i
-
I'm making an applet that will be using a fair number of transparent gifs (a total of ~5-20 megs), and don't know which type of image object would be best suited. Each image will only be a few kilobytes in size and only a few of them need to be displ
-
How to enable "Debug Option" in submit request
how to enable "Debug Option" in submit request
-
Any fiscalyear select varible screen current month-previous month less all
Hi, 1 My requirement is end user will enter fiscal year e.g 2009-2010 (all fiscal year periods come ) and in report my requiremnt is to show data 2. april to march 3. current month minus previous month billing qty e.g april may june july
-
How do I install a single patch?
I want to install patch BEA04_61 on WLS 8.1 SP2. I only want to install this patch and nothing else. The patch is comprised of a jar file that contains the class SSLSocketImpl.class. I've found this class in weblogic.jar and webserviceclient+SSL.jar.