I am trying to add 2 External Dell monitors to my Macbook 13" Air. Will the Mini Display port to Dual-link DVI adapter work? If not what do I need in order to add 2 external monitors?

I Just bought a new 13" Macbook air and want to add 2 external monitors. Am wondering if the Minin Display Port to Dual Link DVI adapter will work. If not is there any other solution to add 2 external monitors to a MacBook Air?

nice, it's always the ones that fail to do a basic search that are the most hostile. i'm sorry you thought my asking you what monitor was 'drilling' my crystal ball was broken at the time.
there are TONS of posts and articles out there with your answer, but since that may be too hard for you, i've provided some here.
http://forums.macrumors.com/showthread.php?t=1597826
http://forums.macrumors.com/showthread.php?t=1714714

Similar Messages

Will my Airbook (11" late 2010) w/ NVIDIA GeFORCE 320M 256MB using the Mini Display Port to Dual-Link DVI Adapter support the Dell 3007WFHC (30") monitor at full resolution (2560X1600)

Will my Airbook (11" late 2010) w/ NVIDIA GeFORCE 320M 256MB using the Mini Display Port to Dual-Link DVI Adapter support the Dell 3007WFHC (30") monitor at full resolution (2560X1600).
Works fine at 1280X800 (with out without MDP DL DVI Adapter) - cannot get any higher resolution

Hi ddickson01,
The MacBook Air 11 inch late-2010 model does support 2560 x 1600 resolution on an external display. See this specifications article for reference -
MacBook Air (11-inch, Late 2010) - Technical Specifications
Thanks for using Apple Support Communities.
Sincerely,
Brett L

Macbook Pro with Retina wont detect monitor on mini display port to dual-link dvi adapter

So after reading Jeff Atwood's post, I decided to jump and give it a shot. So this week I got my monitor in from Korea, and I already had my Apple mini display port to dual-link dvi adapter, hooked everything up - and nothing. Monitor doesnt show a signal, and no display shows up in user preferences.
To verify the monitor actually works, i plugged it into my windows box - and boom, right away there it is in all its glory. So I called apple support, after spending about an hour going through the "are you sure its plugged in stuff", the tech finally admitted to being stumped and blamed the adapter. Not to be deterred, I then went to my local apple store and talked them into trying their adapter to rule out the adapter - regardless of the adapter, the mbp wont detect the monitor.
Just for fun, i tried my old single mini displayport to single dvi, the monitor is recognized, but that obviously cant drive the right resolution, so i just get a backlight. Same deal when i try the hdmi port with a hdmi to dual-link dvi adapter on the end of it. Also tried display port to the same hdmi with adapter on it (the joys of working in a dev shop - cables to test everywhere)
I have read / tried a ton of things:
re-installed / uninstalled air display, just to be sure it was gone. went through all my apps just to see if there is anything like this i could think would be effecting it
install gfxCardStatus to ensure i am on the nvidia (discrete) and not the internal card
Played with different settings on SwitchResX to try to force the res over hdmi - no love - os rejected each one
I bought the monoprice adapter wondering if it was just the apple adapter since the apple adapter has been panned, no love from it either
Reset the PRAM countless times
I have two other adapters coming in to test with in a day or two - maybe one of those will be magic, but at this point i kinda think its software on the mac. My Spec:
I am running Mountain Lion with all the latest updates
New MBP with Retina (2.6g processor, 16gig ram, nvidia video card)
Here is the ebay link to the monitor
Now the other weird thing is pretty much universally these auctions say the monitors cant be run on a laptop - which makes no sense to me, because its just a connection, if the video card is strong enough (which my machine better be) it shouldnt matter the source. The listing mentions its a "by-pass" monitor, which is something I and google have never heard of.
So any sage words to make my day?

Magic was, I have to have the adpter plugged into the mac, let it recognize all with the monitor powered off.
then power on the monitor, and boom gloriousness
For future generations, setup that works:
1) MacBook Pro with Retina
2) Monitor From Korea (example auction)
3) Accell Mini DisplayPort to Dual-Link DVI Active adapter (amazon)
4) Boot mac, plug in adapter, let it recognize the monitor, power on monitor

HT3382 I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter. How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter. How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

Hi alangium,
Welcome to the Support Communities!
Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
This article may provide some information about your Mini DisplayPort to AVI adapter. Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
http://support.apple.com/kb/HT3382
18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573#5
How can I detect displays?
If the detect displays option is not available, hold down the Option key while you are in the Display pane.
How do I select additional resolutions on my display?
You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
I hope this information helps ....
- Judy

I need to connect a computer monitor to my MacBook Pro but have found that when using the mini display port to VGA adaptor the screen display on my macbook is very small font. Please what do I do to correct this?

I need to connect a computer monitor to my mac book pro, using a mini display port to VGA adaptor. But have experienced a drastic reduction in font size on my
Mac screen even before I have managed to check the result on the monitor screen. Please how do I compensate for this and restore my mac screen appearance?
Many Thanks Alangium in uk

Hi alangium,
Welcome to the Support Communities!
Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
This article may provide some information about your Mini DisplayPort to AVI adapter. Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
http://support.apple.com/kb/HT3382
18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573#5
How can I detect displays?
If the detect displays option is not available, hold down the Option key while you are in the Display pane.
How do I select additional resolutions on my display?
You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
I hope this information helps ....
- Judy

Con el Mavericks se bloquea mi macbook pro al conectar el mini display port a mi monitor HP

Conecto el mini display port a mi mac pero se congela aun desconectandolo, con la version anterior trabajaba de maravilla con mi monitor HP Pavilion 20xi 1600x900.

when upgrading to mavericks, on occasion my macbook pro retina freezes when using the trackpad, it shows more often when entering the launchpad, it does not go completely freezes in the middle of the open windows and the launchpad (must go out and do the gesture again to enter the launchpad), and the launchpad to move from one space to another is exactly the same, it stays in the middle and you have to re-do the gesture on the trackpad to successfully pass from one space to another .
the funny thing is that when I use launcher dock does not happen, go to the launchpad fluently.

Switching between Dell 4K display and Apple Mini DisplayPort To Dual-Link DVI Adapter

Hi All,
I've recently upgraded my home setup to a Dell 4K display (Dell P2815Q), which since the 10.9.3 update work as expected.
However the downside is that my office setup uses a Mini displayport to Dual-Link DVI adapter (Firmware version 1.03) and a Dell 30" display (2560x1600), which will not work without a reboot after using the 4K display. If I use the 4K display after using the Dual-Link DVI adapter it works fine.
Is this a know issue ? If not, I'm happy to provide some more diagnostic information to help resolve the issue.

http://www.everymac.com/ says:
*This model supports a simultaneous maximum resolution up to 2560x1600 on two external displays via Thunderbolt. Alternately, it can support a single display up to 2560x1600 via Thunderbolt and a single 1080p display at up to 60 Hz, 3840x2160 at 30 Hz, or 4096x2160 at 24 Hz via HDMI.
DVI is not mentioned at all. You probably need to connect to the display via HDMI to get the 4096x2160 resolution.

New iMAC to Dell 3008 using Mini DisplayPort to Dual-Link DVI Adapter

I just brought the new iMAC 27" iCore7. Previously I was using old MBP with dual link DVI to DELL 3008 and they did fine.
But Today I connect the Dell 3008 to my new iMAC using Mini DisplayPort to Dual-Link DVI Adapter...They could not work properly...
The dell shows images in red with flickers....
I've contacted the phone for help...and they said nothing could be done????!!!!!
Anyone could help??
THX

just update my progress...
I had made calls to Apple technical support center in HONG KONG for help...
To my surprise...they even did not understand what I was saying(Or just pretending...)....One interesting guy said I could take the new iMAC back to service center to change the 4850 display card to older version...or call DELL for help!!!!!
Fuxking Apple technical support center in HONG KONG
I was almost hopeless until I found a minidisplay port to display port cable in Circuit Assembly:
http://estore.circuitassembly.com/products/Mini-Displayport-to-Displayport-Adapt er-Cable.html
ONLY $14.95 !!
They sent the cable to me in 3 days time...and I hooked it up right away when I received it today...my Dell 3008 could display 2560 x 1600 normally again!!!!!
The problem is: Apple is still selling its FUNCTIONLESS Mini DisplayPort to Dual-Link DVI Adapter at high costing....sounds like cheating others....
What' s wrong with the Apple nowadays???

I'm trying to hook up my Macbook Pro to my TV. I'm using the 'mini-display port to female HDMI" adapter. all i can see is my desktop background. no folders or icons and when i play a movie it goes blank.

I'm trying to hook up my Macbook Pro to my TV. I'm using the 'mini-display port to female HDMI" adapter. all i can see is my desktop background. no folders or icons and when i play a movie it goes blank.

Drag applications from your main desktop off the right side of the screen and they will appear on the TV. This is the extended desktop mode.
Regards,
Captfred

HI, I am trying to connect my macbook pro, 18 months old, to a projector using the mini display port and a cable/connector to a VGA port on the back of the projector. It all fits but the there is nothing happening? no mirroring option. Any ideas?

HI, I am trying to connect my macbook pro, 18 months old, to a projector using the mini display port and a cable/connector to a VGA port on the back of the projector. It all fits but the there is nothing happening? no mirroring option. Any ideas appreciated. Many thanks

to get to the Detect Displays button you have to hold down the Option key and the button appears.
SeanfromFulham wrote:
Many thanks, however I don't seem to have any relevant options under displays.

How do I get a video signal to an external monitor via the mini-display port on my Mac Book Air?

I can't get a video signal out through my mini-display port on my Mac Book Air (version 1). Thus I can't feed BBC iPlayer to an external monitor. There is some connectivity - the MAC wallpaper is broadcast, the mouse pointer is visible and sound is transferred. Is it likely to be a cable connection problem (though the cable works with a Windows operating laptop)?

First, what you said is contradictory. You say "can't get a video signal", then say"the Mac wallpaper is broadcast, the mouse pointer is visible". "No video signal" means an absolutely black,blank screen. It sounds like you have plenty of signal.
I am supposing what you are seeing is actually a blank desktop, which is to be expected if your settings are such that you are extending the desktop, instead of mirroring it.
Within the preference panes is a setting that allows you to change this. Open System Preferences, click Displays, and then click Arrangement. You will see that you are extending the desktop. Change that setting.

Is anyone else experiencing problems with the thunderbolt port on their Mac Mini's regarding using it to connect a second monitor? I've got the Mini Display Port to DVI-D adapter along with a DVI-D cable and I can't get an image on the second monitor.

I had an dual display image / setup working twice for a few seconds, but then it cut out. I think there may be a problem with the thunderbolt port.

As far as I can tell you have only listed that you have a DVI monitor connected to the Mini Displayport socket (i.e. the Thunderbolt socket) via presumably the Apple Mini Displayport to DVI adapter and a DVI to DVI cable.
You don't appear to have listed what the second monitor is and how it is connected (even though not working). As such I cannot tell what may be wrong.

Distorted Display - mini display port to Dell ST2420L dvi connection

I am having problem with connecting my new Macbook Air to external display.
I have tried restarting both the Macbook and Dell monitors and installing latest Lion OS updates.
The connection is from mini display to dvi adapter from Apple and a dvi to dvi cable connecting to the rear of the monitor
The monitor works fine with both VGA and HDMI inputs and DVI input from PC
Here is a picture of the distorted display http://t.co/yVdmCfl
Please help
Thanks
Aditya

Hi, Matt, and welcome to Apple Discussions.
The Matrox Support only told me that the new MacBook Pro with Mini Display Port is not supported, but as it's working for 2x1680x1050 with the Dual-Link DVI adapter, I was wondering if the Mini Display Port to Dual-Link DVI Adapter could be the problem.
I suspect that what Matrox Support meant when they said "not supported" was, in fact, "not supported": i.e., they've tried it and it doesn't work satisfactorily. You've tried it too, and found that to be true. Now you just need to come to terms with the fact. Matrox is quite open about it; it's not a secret. See the 9400M/9600MGT MacBook Pro entry in this compatibility table from Matrox's web site:
http://www.matrox.com/graphics/en/support/compatibility/gxm/resolutions/

Monitor flickering with T500 with accell dual-link-dp adapter

I have an HP LP3065 30 inch external monitor, 2560x1600, that I'd like to drive off my T500. I am now on my second accell display-port to dual link dvi adapter and am still getting periodic blackouts of the monitor which last less than a second. At first I thought it was due to insufficient power to the adapter provided through the usb port, as has been reported in various places, so I got a high powered usb hub with ac adapter. Didn't help. Accell said it must be a lenovo problem and that they had "reported" the issue to lenovo. I exchanged the adapter for a new one on the off chance it might be a manufacturing issue but the new one is just the same. Has anyone gotten this configuration to work properly? If so, what dp-dual link dvi adapter are you using? Any special adjustments to your settings? I have the ATI Mobility Radeon 3650 card. All drivers are current as is the BIOS.
Solved!
Go to Solution.

Hi greigite,
Welcome to the Lenovo forum!
Is the Accell B087B-002B the adapter you are using? I haven't used such an adaper, but it looks very nice. It gets excellent reviews on Amazon, though at least one reviewer recommended connecting it to a powered USB hub to eliminate display flickering. You've done that already -- suppose you could try a different powered USB hub on the off chance that the first one is defective, but that seems unlikely.
You might have a look at the power-saving features of your ATI video card. I think you can right-click on your desktop to start "ATI Catalyst Control Center" (if not, think you can find it in the Start menu). One of the panels of CCC lets you adjust power saving profiles, and whether to reduce the vertical refresh rate below the usual 60 Hz. You could try turning the vertical refresh rate reduction feature off, and maybe try some different power-saving profiles.
How often does the flickering occur? Like, once every 20 minutes, or less often?
Best regards,
Frank
Results of Your Ideal Business-Class Laptop survey, concluded 2009-07-29.
Did someone help you?
Say thanks! with a kudo.
Even better: Pay it forward, help someone else.

How do I get my Macbook Pro 15" to run dual monitor setup with Dual Link DVI outputs

I own have two 27" 2560x1440 WQHD LED IPS Computer monitors and have been trying to get them to work with my macbook pro 15" w retina for over a month now. I have purchased multiple products and nothing has worked. The big problem is that the only input that the monitors have is a Dual Link DVI input. The closest that i have gotten to getting them to work was this morning when I bought 2 Mini Display Port to Dual Link DVI Adapters for $99 a peice. Below is a link
http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter?afid=p219%7CGOUS&cid=AOS-US-KWG-PLA
Problem is that when I hook them up, I still only get a picture on one of the screens. Also, it requires you to plug into a mini Display port and USB port which takes up all of the space for me to run any othe peripherals. Though it has a built in USB port, when I plug my apple keybaord into it, I get an saying "USB Device Needs power, connect "keyboard Hub" to power or usb port on this mac"
I have looked everywhere for a docking station that would satisfy my needs, however, it does not exist. I use my macbook as my main office computer and take it home with me every night. I switched from the lenovo thinkpad to the macbook and have been satsified with my decision except for the fact that i cannot connect my monitors to it.
Please help!

Yes, that would work, however it would cost me $2000 for the monitors.

I am trying to add 2 External Dell monitors to my Macbook 13" Air. Will the Mini Display port to Dual-link DVI adapter work? If not what do I need in order to add 2 external monitors?

Similar Messages

Maybe you are looking for