I am trying to draw a signature, my old one deleted how to do this? I am getting a weird digital signature.

I am trying to add my signature to a couple of forms. It is not allowing me to do it anymore, it is putting in a weird digital signature. How can I draw a new signature?

I still do not understand what you're trying to do. Which group on the "Sign"panel you are using: "I need to Sign", "Get Others to Sign"or "Work with Certificates"? Which selection you click on? Is it "Place Signature" in "I need to Sign"?
If it is and you get a dialog to draw a rectangle, it means that you previously selected in "Place Signature" the "Use a certificate" choice. This is a digital signature of the same type as in "Work with Certificates". If this is not what you want, click on the down arrow next to the "Place Signature" (looks like a triangle) and choose "Change Saved Signature". You will get a dialog that allows you to change the signature type. Select the one that you want to use and it will be used in the future every time when you click "Place Signature" until you choose "Change Saved Signature" again.

Similar Messages

  • TS1424 i'm getting 'Error 306' when trying to log into itunes. Does anyone know how to fix this?

    I'm getting 'Error 306' when trying to log into itunes. Does anyone know how to fix this?

    Perhaps try the iTunes Store loads partially or returns "Error 306" or "Error 10054" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • My macbook camera has stopped working - tried on Skype, Facetime, and Photobooth. Any ideas how to fix this?

    My macbook (purchased in 2007) Mac OSX Lion 10.7.5 camera has stopped working - tried on Skype, Facetime, and Photobooth. Any ideas how to fix this?

    If restarting doesn't fix, use the relevant suggestions from Apple's How to Troubleshoot iSight.  If nothing else there works, the repair by an Apple-Authorized Service Provider suggested there and by spudnuty will get it sorted.
    (Over time, Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD."  Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)
    Message was edited by: EZ Jim
    Mac OSX 10.10

  • IPad shows error 0xE8000024 when trying to connect to I tunes. Not sure how to fix, also all I get on my ipad is the apple symbol. how can I fix this?

    My ipad will not power on all I get is the apple for awhile then it dissapears. I conncected to my laptop to reconfigure  with i Tunes, even  uninstalled i tunes and reinstalled it on lap top and I keep getting an error ( 0xE8000024), does anyone know how to fix this?

    Have you tried any of the other suggestions in this kb article.
    http://support.apple.com/kb/TS3221

  • I am trying to re-install ITunes on Windows XP.  When I do this, all I get is the "save" or "cancel" message, not "run".  What am I doing wrong?

    Because of  getting the message that I had to uninstall Apple Mobile Support Device and ITunes, in order to get my ITunes to be usable, I did that.  While trying to re-install ITunes, all I get on the message is the choice to "save" or "cancel".  It will not give me the "run" choice.  What am I doing wrong?  This should be fairly simple to reinstall, I thought.
    I am running Windows XP on a desktop computer using Firefox.

    Thanks so much.  This definitely worked.  I'm sorry I did  not think of using IE.  I use Foxfire exclusively so seldom even think of IE as an alternative.

  • Trying to restore new iPhone to old one's settings. Please help!

    Hi there! I had to swap out my iPhone today for a new one, the receiver was no longer working. I had backed up my iPhone before taking it in to get switched, and now I'm trying to restore it back to my old phone's settings. When I plugged in my new one to iTunes, it said I had to first update the software on the phone before restoring the old settings. I did this and now can not figure out how to go back and restore those old settings
    If anyone could help I would be beyond grateful!
    Thank ya'll so much!
    xx
    Ash

    Restore the iPhone with iTunes. Restoring from the backup is the default selection when doing so after the iOS is reinstalled. Select from the backup for your previous iPhone when prompted if not selected by default.

  • Can't synch contact to current ICloud full mail address.  It is trying to synch to the old one.  How do I change it?

    I have an old Apple ID that was not the full e-mail address.  Outlook is still trying to synch to the old address while my IPhone and IPad are synching to the new full e-mail address.  Thus my computer does not sycn to the IPad and IPhone.  How do I correct the Outlook address?

    <---------Has the same problem, looking for and answer also!!

  • I recently changed my Apple ID primary email address and now I can't sign into Game Center. It recognizes my new Apple ID but it keep trying to force me to create a new Game Center nickname when I want to keep my old one. How do I fix this?

    Just as the title says. How in the world do I fix this?

    To migrate your data to a new iCloud account go to Settings>iCloud and turn off all synced data (contacts, calendars, etc.), when prompted choose to keep the data on your phone.  After everything is set to off, scroll to the bottom and tap Delete Account.  Next, create the new iCloud account on your phone and turn on syncing for contacts, calendars, etc again.  If prompted, choose Merge.  This will upload your data to the new iCloud account.

  • I have a blackberry 9930 through work. i am gettin a failed to execute your last action. (-9)  message when trying to sign into enterprise IM. any advice on how to fix this problem

    any help with this would be appreciated

    From the BlackBerry Knowledge Base KB17066:
    Cause 1
    Issues with the Instant Messaging client are preventing the login.
    Resolution 1
    Update to client software version 2.6.15. Download here.
    Cause 2
    BlackBerry Collaboration Service instance is in an Availability state of Standby.
    Resolution 2
    Change the Availability state to Primary.
    or
    Unassign and then reassign the Available Dispatcher instances.
    Cause 3
    After an SQL server outage the BlackBerry Collaboration Service and the BlackBerry Dispatcher were not communicating properly with each other.
    Resolution 3
    Restart the BlackBerry Collaboration Service.

  • My front camera lend wont open it just stays blurry and one know how to fix this? Restore didnt help tried it already

    front camera wont open it stays blurry its an ipod touch 5g

    Hey Techmeout, If a restore to new did not solve, most likely dealing with a hardware issue. Contact your Apple store or the Apple Genius Bar, set up an appointment and have your iPod evaluated for possible hardware issue. Then go from there.  Good luck. Cheers.

  • HT204022 Trying to delete old photos. How to do this?

    Our old computer died, the one our ipad was setup with. We got a new one, now I cannot delete the older photos. Photos taken after that can be deleted. Help please.

    The links below have instructions for deleting photos.
    iOS and iPod: Syncing photos using iTunes
    http://support.apple.com/kb/HT4236http://support.apple.com/kb/HT4236
    iPad Tip: How to Delete Photos from Your iPad in the Photos App
    http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-apphttp://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
    Another Way to Quickly Delete Photos from Your iPad (Mac Only)
    http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-onlyhttp://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
    How to Delete Photos from iPad
    http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.htmlhttp://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
    iPhoto for iOS (iPad): Delete photos from iPhoto
    http://support.apple.com/kb/ph3137http://support.apple.com/kb/ph3137
    How to: Batch Delete Photos on the iPad
    http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipadhttp://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
    How to Delete Photos from iCloud’s Photo Stream
    http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
    Delete Pictures from Your iPad
    http://www.dummies.com/how-to/content/delete-pictures-from-your-ipad.htmlhttp://www.dummies.com/how-to/content/delete-pictures-from-your-ipad.html
     Cheers, Tom

  • I just got an iPad mini and the volume icon will not come off the middle of the screen. I tried turning it off and on but that didn't work. Any one know how to solve this problem? Please help!

    My volume icon won't go away on my iPad mini

    Try resetting the ipad by holding the home and lock button simultaneously until the device restarts.

  • My iPod touch is trying to update too many apps at one time how do I stop it ?

    my itouch had around 73 apps that needed to update, so I chose "update all". I guess its overload, the little spinning circle at the top of the screen
    keeps spinning but nothing is happening. So how do I stop the updating process, so I can start over by updating one at a time?
    I hope someone can help me with this!

    You really can't. Try downloading them on your computer and sync. Next try restoring from backup.

  • Trying to reload adobe 10 and 7 on new computer. old one crashed. shows i need a serial number

    purchased adobe 10 and 7 -- 2012 and 2013 -- trying to install on new computer. old one crashed. shows i need serial number. where do i get it. only have 6 discs.

    Adobe is a company... what does "Adobe 10" and "Adobe 7" mean?
    If you bought those on disc I don't think they are part of the Cloud
    The serial number is usually on a sticker on the disc holder inside the box
    If you lost your serial number check https://www.adobe.com/account.html for your registered products
    When you figure out what programs you have, you might check the specific forums
    If you start at the Forums Index http://forums.adobe.com/index.jspa
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right to open the drop down list and scroll

  • I have an Iphone 4s that I installed the face button app. After trying to use the first time, my phone locked and stopped working. Does anyone knows how to fix that problem or how to reset this phone?

    I have an Iphone 4S that i installed the face button app. After trying to use it, my phone locked and I cannot get it to work anymore. does anyone knows how to reset this phone and get it working again?

    A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
    No content is affected by this procedure.

Maybe you are looking for

  • How to find out what Oracle version?

    Hi, Could anyone tell me how to find out what Oracle version is on your AIX/Unix machine? It looks like Oracle Installer doesn't use the native OS installation(installp,pkgadd) process, so I can't use lslpp/pkginfo to find out what filesets are insta

  • Is it possible without O/E

    Is it possible to cluster FMS professional servers like you could FCS 1.5 servers or has this capability been blocked to force upgrading to an edge origin license?

  • XI to As400 FTP connection

    Dear All, Scenario Poxy to File. Client is using AS400 FTP server. there is a connectivity establish between Xi and AS400 FTP,Even in RWB component monitoring the File adapter log is successful with no error. But when I login into the AS400 system th

  • Axis2  1.4 client Generation for EJB3 service - RPC Encoded

    I am trying to create a Webservice client in eclipse and i am using AXIS2(1.4) environment but when i try wsdl to java, i get the following exception. Exception occurred while code generation for WSDL : org.apache.axis2.AxisFault: Encoded use is not

  • Why can't I open the edit part of elements 12???

    Please answer this question...