I am trying to generate an array of 30 random numbers. after every 5 readings a new vi should open and tell the user that 5 readings has been completed. and again carry on with the generation of array.
since i do not have a transducer now, i am currently generating an array of 30 random numbers. after every 5 readings a warning should be given to the user that 5 readngs are complete. this cycle should repeat. the array size is 30.
please help me out, waiting for reply asap.
once i have the transducer, i will be taking 30 analog samples and then after every 5 smaples that wraning will be displaye din a new VI
Solved!
Go to Solution.
Use a while loop with a time delay representing your sampling period.
Use the count terminal to check if equals 4, so 4th iteration=5th sample.
Use a case structure. The true case will only be executed on the 4th iteration.
In the true case place a subVI with your desired message in the front panel. Go to the VI properties window and set "open front panel when called".
The closing condition of the warnign is not giving in your description.
Consider that rather than usign a subvi for this, you could use the "One/Two/Three button dialog" or "display message" vis at the "dialog and user interface" pallete.
Please give it a try and send your own VI. Do not expect us to provide a working solution.
Regards,
Similar Messages
-
I have today purchased an iPod nano (gen 6); I use Windows 7. Am trying to register my iPod but each time I submit required info I get the message "iTunes has stopped working". I have reinstalled iTunes with same result. Where do I go from here?
BrianHello notime4,
The article linked below details some useful troubleshooting steps that can help stabilize iTunes on your computer.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Allen -
My macbook pro with OS 10.6.7 'mail' program does not send my mail through the IPS wireless, I am connected to. The message is my 'e-mail is rejected by the server'. It has been working until 5 days ago. The connection doctor says I am connected and no log in required.
After trying lots I found now in 'Airport Utility is 'unable to detect any airport wireless devises.....'
There is no provider to be seen in airport utility and only 'rescan' is an option with no results...
even so I am connected and can browse the net receive mail etc. and the outgoing 'mail server' is set to the internet provider I am connected to.
Can you enlighten me what can I do I need to use my e-mail program urgently !!!
Thanks for your helpI'm not sure what "IPS wireless" is, but unless you have an Apple Wi-Fi base station (such as a Time Capsule, AirPort Extreme, or AirPort Express), AirPort Utility won't see anything.
You might try defining a new SMTP server to see if that will work any better.
By the way, the subject field for these messages isn't intended to hold a lot of text. Put a short description of your problem in the subject field and save the rest of your message for the body field. -
the email informing the giftee that album has been sent has not arrived after many resends. Email address is fine. Have even tried a second email address and still no joy!!!
Anyone out there with any ideas?Your dad should go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards. -
My email address has changed and when I try to play purchased songs it asks me to authorize another computer under the old email address. How do I play the music that I have purchased? My account is current with the new email address.
You may have already done this, but try de-authorizing your computer (through the iTunes:Store menu) and then re-authorizing it.
-
2nd day w/my ipad2. Have spent 5 hours trying to get my ipod music to play on the ipad..it has been downloaded and synced. When I click on itunes , I get a window that says "Apple mobile device service is not started." I get music symbol when click ipod.
http://support.apple.com/kb/ts1567
-
my 5th generation ipod acts like it is going to sync and then "ejects" itself before even 1 song can be synced. It then doesnt recognize that it has been ejected and keeps the"do not disconnect" icon on the screen even after unplugging. What do I do? it also makes a lot of noise while connected to the computer.
Is the camera damaged? Could be a hardware problem.
Try:
Close the Camera app in the multitasking bar, then try again.
Restart/Reset/Restore your iPod. In that order. -
To repeat my question, Apple offered to install iCloud, and I allowed it. Yet when I try to sign in to iCloud using my Apple ID email and pswrd--an ID that I've been using for YEARS--I'm given the message, "This Apple ID is valid but is not an iCloud account." What is going on?
Everywhere I search on Apple's Support site says to sign in to iCloud using your "Apple ID," which I did. I've had my iTunes account for years (even migrated from the old AOL account system). It's the standard email+password that everyone is supposed to use.
My main question is how can I have a valid Apple ID and not an iCloud account--if the two are supposed to be linked?
Thank you for any help you can give me!
tljI've tried both. First, I tried on my pc, where iTunes had installed iCloud when it last updated. I have iTunes installed on this computer (and on my iPad and iPhone), but that wasn't the issue.
So I went online, thinking I needed a separate iCloud Apple ID, but it prompted me for my current Apple ID and gave me the message about my ID being "valid" but not an iCloud account," which, lol, was what it had asked me to do in order to create one. I checked, and at least one other user is having the same issue. I'll attempt to copy/paste the Support request url: https://discussions.apple.com/thread/4430653?tstart=0
Thank you for any help you can give.
Trish -
I downloaded the os 6 by wifi and when the phone restarted it told me to plug into itunes. I did that and the iphone software update has been stuck on '70 hours remaining' for the last 3 hours. Help!
it says " itunes has detected an iphone in recovery mode. you must restore this iphone before it can be used with itunes" so i restore it and after it gets finished it says " the iphone :iphone" could not be restored. the device cannot be found" but ive used this itunes since i got this phone.
-
I updated to 7.0.2 and now some of my music has been removed and I can't find it, and music I deleted years ago has reappeared, and I can't delete it from icloud. My phone will also no longer sync with my computer. My phone has also been freezing regularly since I updated.
The reason, I included the annotation that I'd upgraded my Itunes, (On my Computer) is B/C in many forums - the very first question, *HELPERS* ask, is. "Do you have the latest version of Itunes downloaded on your computer." I wanted to knock out any obvious replies.
Now- "DO YOU have any idea,"... how your UNHELPFUL remarks, do absolutely nothing but hurt others that might not have the EXPERIENCE you have? How do you expect people to know things without asking questions? Whew! RUDE!!
Message was edited by: Apple I0S Help Team -
I've rented a movie from iTunes on my PC but every time i try to play it, a notification appears saying that iTunes has stopped working and it closes the program...how do I fix this???
Try the following user tip:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows -
When i run Time Machine to back up my computer on to an external hard drive, i have no way of knowing when the back up process has been completed. This is necessary to know because i don't leave my external hard drive connected to the computer. I routinely disconnect it after backing up the hard drive, and then i store the external hard drive in a different location from the computer. So, knowing when the back up process has been completed would be a very helpful thing to have the computer specify.
Just enable Time Machine's menu extra (System Preferences -> Time Machine -> Show Time Machine in menu bar.
This will add a little Time Machine icon to your menubar. When Time Machine is actively backing up your data, the icon will spin as a visual indicator. You can also click the menu icon to see the backup status, including how much data is left to back up. -
Until recently I was able to send images in the body of my Yahoo emails. Now, I am getting the message "This message has been truncated", and the email does not go through. I do not have this problem using IE. Could you please help? Thank you.
Try this -> http://support.apple.com/kb/TA38632?viewlocale=en_US
-
I have a quick question for you and it would be great if you can answer me on this.
I'm working through SharePoint Workflow issue (developed using Nintex) that started recently where people are getting workflow error and I don't see issues if I submit it myself. Current error. - "Failed to start workflow. The workflow cannot access
the item that it has been applied to."
I haven't made any major changes to Workflow except for changing email notification content and publishing it. My question is, do I need to publish the rest of the workflows too that are associated to the list after I publish changes of one workflow? Looks
like users have required permissions to submit the form. Please let me know how to get rid of this error.
smithHi Smithspd,
According to your description, my understanding is that your users got a workflow error, and the workflow is created by Nintex.
For SharePoint Designer workflow, once we do any change in a workflow, we need to re-publish the workflow.
For your issue, I suggest you re-publish the workflow, compare the result.
In addition, as your workflow is created by Nintex and this forum is for SharePoint Designer, I suggest you ask Nintex support or forum for better help. Thanks for your understanding.
Best Regards,
Wendy
Wendy Li
TechNet Community Support -
I hear that Apple has been hacked and viruses uploaded into the system. Is this true?
My trusted friend informed me that Apple has been hacked and viruses are being uploaded. Better find out the truth....so, is this true?
Have a read from the New York Times:
http://www.nytimes.com/pages/technology/index.html?adxnnl=1&adxnnlx=1333795205-E mIT8EJSN69/qTw5iqTTxA
Ciao.
Maybe you are looking for
-
I can no longer get to my saved passwords anymore.
I currently am running Nightly 34.0a1 and I'm unable to access my saved passwords. The window that usually comes with asking for the password does not show up. I've never had a problem with this until I updated to Nightly.
-
Unable to change the status of a project to approved
Dear Members, I am using the Oracle Vision Instance version 12.1.3 and Database 11.2.0.3.0 I have created a project. I am unable to change the status of the project to APPROVED. I am getting the below error:- Please enter an active project manager fo
-
Air printer problem connecting to iphone
My iPhone is not connecting to the air printer. I can print from a laptop. The phone is connected to a home network. How do I get my phone to find the printer? thanks
-
Trying to change text in a movie clip
i'm trying to replace text in a dynamic text field within a movie clip, and it seems as if it's treating it like static text. Is there a way around this? theBtn1.addEventListener(MouseEvent.CLICK, adjustText1); theBtn2.addEventListener(MouseEvent.CLI
-
Retrieve the Archived Purchase order
Hello All, Please help me with transaction to retrieve the archived Purchase order. Regards Kalyani.