I am trying to get an AP to associate with a wireless Controller but keep getting this error message (%CAPWAP-3-ERRORLOG:Could not resovle CISCO-CAPWAP-CONTRPLLER)
I am trying to get an AP to associate with a wireless Controller but keep getting this error message (%CAPWAP-3-ERRORLOG:Could not resovle CISCO-CAPWAP-CONTRPLLER)
I can ping through to the WLC and the AP.
Thanks a lot Loe for the Feedback. The issue was not my configuration but rather the type of Wireless LAN controller I have, the WLC does not support my AP's. I have a Cisco 520 series WLC and got to know they only work with the 500 series AP's. my AP's are 1130 series meaning i have to get another controller or change the APs.
thanks once again..
Similar Messages
-
Trying to make a dvd from a project and this error message appears .The project could not be prepared for publishing because an error occurred. (-2125)
Hi
Error -2125
OK Error code - 2125 usually indicates that the movie is to large.
It use to pop up when going to iDVD !
iDVD - DO NOT CARE ABOUT Gbs at all. I got movies on 500Mb that do not fit and 50Gb that fits nicely.
iDVD - ONLY CARES ABOUT - Duration. Duration is Movie time + MENU TIME. Choice of
menu and animation of this can take lost of "DURATION" 15 minutes or even more.
Choice of encoding method and use of SL or DL DVDs determine the DVD limit.
iDVD 08 & 09 & 11 has three levels of qualities.
iDVD 6 has the two last ones
• Professional Quality (movies + menus up to 120 min.) - BEST
• Best Performances (movies + menus less than 60 min.) - High quality on final DVD
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6) (movies + menus up to 120 min.) - slightly lower quality than above
DL DVDs can store about double of these times.
ALTERNATIVE - The Error Code can indicate that free space on Start-up (BOOT) hard disk is
less than 25Gb (my minimum)
calbe - wrote
If you are getting OSStatus error -2125, I've seen this caused by the computer display sleep settings.
Try changing the sleep settings to never and see if you are able to export.
Yours Bengt W -
I am having trouble dating to version 3.6.14 or updating to the Beta testing. I am running Linux/Ubutu OS and I get this error message:/tmp/p7x3vko2.part could not be saved, because the source file could not be read. Please help. Thank you , Deb
Solved for me.
I set the owner/permissions of my profile's mozilla folder's (and all the files in it) to read/write access, and the problem disappeared.
in linux:''
* cd /home/myusername/.mozilla
* chown -cR myusername:mygroup ./
* chmod -cR +rw ./
'''Never do that with root privs (nor with sudo)''' -
When I try to activate my home sharing on iTune I get this error message."home sharing could not be activated because an error occurred(-2146762487)" .How can I solve this problem?
I have a brand new iMac with all the newest updates etc etc, Safari logs me in without any problem but iTunes etc is just not working.. and I have the same message...Any ideas how to resolve this?
"Home Sharing could not be activated because an error occurred (5506)." -
I just replaced my iPhone 5 because of a cracked face. I backed up the old phone to iTunes. When I tried to restore my data off of iTunes to the new phone, I got an error message saying that iTunes could not restore the iPhone because not enough free space is available on the new iPhone. Now what?
I have Apple Care+, but I'll be darned if I can find any way to contact anyone at Apple to talk to about this. They take your money, but make darned sure they don't have to support you unless you jump through a bunch of hoops first, like this site.I've done a restore.. The phone was completely wiped back to factory settings.. It then tells me there isn't enough space on the phone to restore from back up? How when the phone is empty?!
-
I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened. Please repair or reinstall QuickTime". I did that and it did not help. Any ideas?
Let's see if a more rigorous uninstall/reinstall procedure gets us past that, nancy. See the following troubleshooting document:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP -
When trying to log on to I-Cloud with my Apple Id, I keep getting the message that this is a valid Apple Id but not an I-cloud account???How do I link my I-Tunes Apple Id with I-Cloud?
You are logging in iCloud for the first time. In this case, first you need to log in iCloud on an iPhone, iPad, iPod touch or Mac. See > http://www.apple.com/icloud/setup
If you have not got a device to set iCloud up, you cannot use it. You can only use iCloud on your PC if you have got an Apple device -
I am trying to load photos from my computer on to my ipad but keep getting the message "the device is no longer connected to the computer". It keeps popping up and I am stuck. This happened after I upgraded to the latest itunes software.
Greetings cdewinkel,
It seems your iPad is not staying connected to your computer during syncing. The following article provides a number of troubleshooting steps which may help. This article is intended for devices which are not being detected, but the troubleshooting steps are relevant to your issue:
If you don't see your connected device in iTunes for Mac - Apple Support
Make sure that your device is on
Also make sure that you can get to the Home screen.
Get help if you have one of these issues:
Your iOS device won't respond or turn on.
Your iPod won't turn on.
You forgot your passcode or your device is disabled.
Make sure that your Mac supports your device
See the system requirements for iPhone, iPad, or iPod.Check your USB connections
Unplug other USB devices from your Mac and try again.
Try a different USB port.
Try a different USB cable.
Learn more about using USB cables with your Mac.Make sure that your device trusts the computer
You might get an alert if you haven't connected your iOS device to this computer before. Unlock your device and tap Trust.
Learn more about the Trust This Computer alert.Restart your device
Restart your iOS device or reset your iPod.Restart your Mac
Turn your Mac off and back on.Update your software
Check for software updates on your Mac.
Check for an iTunes update.
Check your security software
If you have security software installed, learn how to resolve issues between iTunes and your security software.
Get more help
If you still don't see your device in iTunes, contact Apple Support.
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D -
Trying to download itunes onto PC installed with windows vista. Download keeps getting to 99% with 1 second remaining and then freezes / does nothing? Any help appreciated.
I solved the problem! The updates orignally were downloaded to the C: drive of the server. I've since moved them to the E: drive and for some reason the Content folder in IIS didn't change the file path to the new WSUScontent folder.
The root cause for this was failing to use the UTILITY designed for this very purpose.
I edited the virtual directory settings in IIS and was able to put the correct path in.
You still need to use the UTILITY.. to fix all the other stuff you're still missing.
In the %ProgramFiles%\Update Services\Tools folder...
WSUSUTIL MOVECONTENT E:\WSUS E:\WSUS\MoveContent.LOG -SKIPCOPY
This problem was caused by moving the WSUS updates to a different local drive.
No. This problem was caused by IMPROPERLY moving the WSUS updates to a different local drive.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
My problem - when syncing and error messages comes up: iTunes could not sync calendars to the iPhone because an error occurred while margin data." I've tried turning the phone off and back on, & tried both USB ports but get the same thing. What can I do next since it doesn't give me even one clue as to what the error would be?
Before I started to resync calendars one by one as suggested in the troubleshooting article, I remembered something that came up in a sync when I first attempted : a 'which one do you want to keep' message about a repeating calendar event, which came up with three options, one from Calendar, and two from iCal on the phone. I deleted that event, then went through the calendar resync one by one, and all seems OK now.
In Music there is a way to find 'ghost' items that show up as grayed-out on the menus, so that you can try to reassociate or delete them. It would be nice to have a similar way to work with Calendar!
Thanks for pointing me to the right article. -
Please Help..
Trying to restore / update ipod 3rd generation - keep getting error message - The ipod touch could not be restores. An unknown error occurred (-1).Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
The "device may need service" means a hardware problem. in that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I am trying to connect my new ipad to my BT Home Hub but keep getting a message saying that I am unable to join the Home Hub network. Any advice?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
i have an apple 3g, tried to upgrade it to a 4.2 version, (previously it was 4.1). it wasnt successful, the computer asked us to restore it to the version which was last operational, and while restoring an error message appeared "the iphone could not be restored, an unknown error occured
"This error is caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple."
Taken directly from this article http://support.apple.com/kb/TS1275.
Plug your iPhone into iTunes and update it to the latest supported version, which is 4.2.1.
- Greg -
Whenever I try to sync my iPod Touch 5th gen with iTunes I get an error message saying "The iPod "*****" could not be synced because the sync session failed to start". Is there any way I can fix this?
B-rock, thanks for posting the above. I actually have the same issue, running Windows XP and I don't have that backup location, \Application Data\Apple Computer\MobileSync\Backup\. When I go to Documents and Settings\(username)\ there's a AppData folder followed by:\LocalLow\DataMngr\ .
I have the latest update, 5.0.1 and I have the iPod Touch 3rd gen.
I have tried removing itunes and all that is associated with it then reinstalling and keep getting the same message. I've reset my ipod thinking that would help but still, no backup.
In iTunes, Edit, Preference, Device there are no backups.
What am I doing wrong, can you help?
Thank you! -
Im getting an error message "the backup volume could not be mounted"
I'm getting an error message "the backup volume could not be mounted"
Is this a new message to a drive that has been ok?
Or are you trying to connect a new disk? If so it is wrongly formatted.
Or is this a TC.. have you tried rebooting or resetting it?
Maybe you are looking for
-
How to add custom field in Documents Tab of PO Header ?
Dear SRM Friends, This is a challenging task as an ABAPer to confront to.. We are in the midst of a requirement where we have to add a custom field in the PO Header. But the requirement is to add the field in Documents Tab in PO Header Data as fo
-
Two Spaces being converted to from ascii 32,32 to ascii 160,32
Two Spaces being converted to from ascii 32,32 to ascii 160,32 when the page is loaded by the browser. This problem is exhibited when viewing an address page in personal data that contains two spaces in the address field. i.e.. APT102- 102 Elm St. We
-
Has anyone had this problem with VPN iPad vpn connection could not validate the server certificate
Has anyone had this problem with IPad 3 after upgrade to IOS 7, trying to to connect VPN , but I get this messag, "could not validate the server certificate". I am trying to connect to Oracle VPN.
-
Comparing function values. Why does it fail ?
Does anybody know why the comparison fails of two variables pointing to the very same function ? I'm keeping a list of function references in a sequence. At some point specific references have to be removed from the sequence. This is done by passing
-
Ola kiero que me ayuden últimamente me a aparecido un problema mi iphone solo carga cuando está completamente descargado y se apaga si tiene carga no carga y si esta apagado y esta cargando y lo desconectó ya no vuelve a cargar asta que se descarga x