I am trying to get my older mac book connected to my new desktop Mac via firewire so I can transfer pics and it is not working. It is showing me that the firewire is connected by neither computer can see each other? Thoughts?
Any help is much appreciated.
How about some details on the older Mac if we are to help you?
Allan
Similar Messages
-
I tried updating iphone software and it did not work. It just shows connect to itunes with usb cable on the handset. I have tried for hours to try and turn the hanset off and troubleshoot but nothing works. The connect to itunes display can not be over-ridden.
Please help!!!oh and the device is not being recognised by itunes now either.
-
I HAD AN IPHONE AND I DOWNLOADED MANY PAID AND FREE APPS FROM ITUNES STORE.NOW MY IPHONE AND LAPTOP ARE NOT WORKING.HOW DO I GET THESE APPS INTO MY NEW LAPTOP SO THAT I CAN SYNC WITH MY NEW IPAD
How to redownload purchased apps from the App Store
-
I have repeatedly tried to re-open PE13 Organizer with no luck. The first time there was a message that the catalog was being organized and then it crashed. From that time on, I only get a crash message that it unexpectedly quit. How can I get the photos off the organizer so I can open it back up again? Thanks!
zna2212zna22121,
Close computer down, and restart. If it does not work, it should, then re-install. But, do not attempt more than 200 at a time it just cannot handle it ?
Good luck
Ps. I just dislike Organiser, (it is too slow, and disorganised) you can go from PE 13 Editor ( My wife tried it and went back to PE 6 ) and Process Multiple Files only 200 at a time. in Photoshop Elements, Organizer may handle it ?
We often do video production stills of 2,000 from PE 6 and we know it works ,when you use the images in Adobe CS5.5.2 Premiere Pro..for HD & Blue -ray transfers.. It is very easy ? -
My husband has an SD card he uses for his trail camera. We put it in our mac book pro and can look at the pictures but when I go to move them to the trash it tells me that the files can't be moved to the trash because they cant be deleted. I have Nikon camera software on my mac and it pics up and asks if you want to import the pics and if you want them deleted from the devices afterwards. I tried that but I get a message afterwards that says that some files were not able to be deleted. When I go to check, none of them were deleted. How can I clean of the SD Card? I do have a camera I could stick it in, it would just be nice to know how to do it from my mac. Also, the files are jpg. if that matters.
AFAIK cameras offer their own built-in format utility for inserted SD cards. You should use that. Otherwise, refer to the manual that came with your camera to determine precisely how your SD cards need to be formatted to work properly. Personally, I'd suggest Partition Scheme: MBR, and Filesystem: FAT32.
Try to limit the number of formats you perform on the SD cards, though, as you're reducing their lifespan. I believe formatting causes re-writes to a portion of the SD card that has fewer read/write cycles than the rest of the card as a whole. -
Try to include the IDM cc version which works with firefox 4 tooo, like the all other older versions...
You might try using the add-on 'NoSquint' which allows numerous zoom options specific to each page you visit & keeps your settings - https://addons.mozilla.org/en-US/firefox/addon/nosquint/
If you want to go back to 3.6x, you will find it here:
http://www.mozilla.com/en-US/firefox/all-older.html
In most cases you can simply "upgrade" (meaning downgrade) directly from the installation. It would be a good idea to save your passwords & bookmarks just to be on the safe side. -
Iam new to Mac and hence wish to learn basics of Mac. Iam in Mulund, Mumbai, India. Pl let me know if anybody can teach basics of Mac to build up further knowledge. Also let me know charges etc for teaching.
Try this link http://www.apple.com/au/business/theater/mac.html for the fantastic Apple video tutorials.
-
.mac and phone sync not working!! Endless sync that endsin error
Sync with .mas takes an age but ends in error, still the isync icon in the menu bar continues to turn.
Likewise the isync function to sync with my phone which previously synced seemlessly and without issue is doing the same. It's not establishing a connection but the sync 'wheel' continues to turn.
Any ideas?
I've repaired permissiones, restarted and used disk warrior to rebuild the disk. All to no avail
I'm using 10.4.7,. which I installed when it first came out and had no problem initially.I have had the same problem for the past 24 hrs but it is now fixed. I don't know if this will work for you but just in case here goes.
I had just done an erase and install of Tiger and I managed to get 1 sync happen after, but then it stopped recognising my computer to sync. In the Advanced pane of DotMac in system preferences my computer was there - i deregistered and re-registered - but nothing seemed to happen when I clicked the Sync wheel other than the wheel turning. In the Console (via Application/Utilities) I noticed that the DotMacTranslator.log which usually showed any syncing activity showed absolutely nothing, as if it had not noticed that syncing was happening. In the DotMacSync.log I kept getting the recurrent message below everytime I hit the Sync button.
2006-07-16 12:44:50 +0800|Info|Starting .Mac Sync Session for 'XX'
2006-07-16 12:44:55 +0800|Info|Nothing to sync for this session - cancelling the sync
2006-07-16 12:44:55 +0800|Info|Ended .Mac Sync Session
So somehow something was telling my computer there was nothing to sync and to stop syncing but the wheel had not got the message that syncing had stopped.
Eventually I decided to simply copy over my iCal Calendar and Address book from the other computer (ie. by choosing File and Back up Database in each of iCal and Address book, moving the database files into the computer I wanted to copy over to and opening the files, saying "yes" to reverting to the data in the file). Then I went to Entourage and enabled synchronisation via Preferences in there and suddenly everything everything started working again. No problem since. I'm not sure if it was the act of copying over a new database from the other computer or the Entourage syncing, but I would suspect the former since I can't explain why the latter would work.
My suggestion if you haven't already done so is to open the Console when you are syncing and observe what happens in the ~/Library/Logs area during the process as I've found that doing this, experimenting with various configurations while observing that effect in the Console and lots of patients usually sorts out the sync problems that I encounter. Good luck.
Power Mac G4 & Powerbook G4 Mac OS X (10.4.7) -
Imessage not working propierly, doesnt show read below the message.
imessage not working propierly, when I send a message its says delivered but when people read them I never get the read receipt below the message, i have the 4 gen ipod, please help!
Here's how I fixed the issue.
I did an iCloud backup
Did a full reset
Restored backup and guess what.... it didn't fix the problem.
However.... here is what did fix the problem
I went into Settings --> Messages
Listed under the "Send & Receive" button it only showed one address listed.
On the 'You can be reached by iMessage at' it only had my email address there with a check mark. My phone number was unchecked but i couldn't check it for some reason. So what I did was click on my Apple ID at the Top and choose view account. Entered in my password and that made the phone number show as checked. Then I started getting iMessages on my iPhone again. If that doesn't work. Click on Apple ID at the top and choose LOCATION -
My iphone 4 of ios 7.1.1 sim card has not working from since yesterday, it always shows searching whenever i insert sim in it, i do it again and again, but it cant be fix. What can i do? Please help me.
Get a new SIM from your carrier.
-
i was changing the font on my iphone yesterday and the apple came out saying it was going to respring or restart springboard i dont really remember now it has not came on since yesterday i have turned it off and on a couple of times and it does not do nothing the apple comes up and it seems like its going to start up but it freezes what do i do to fix it i really need my phone i have a child and im by my self most of the time with my son
Is your iPhone jailbroken? If so see: http://support.apple.com/kb/HT3743
-
This problem has been going on for a few days. my computer connects to the internet fine and runs fine, but none of my Internet browsers will work. I have deleted all my history, cache, cookies etc. For all browsers. I have also made sure that i have no proxies on and that no firewall is blocking my Internet. I have ran virus scans to look for malware and nothing comes up... I'm very confused.
For chrome I get errors like "err_socket_not_connected", "err_connection_closed", and "err_empty_response"
for safari it just says "safari can't open the page because safari can't establish a secure connection to the server"
please help me if you know anything! Thank you in advancedHi, mattkaroni.
Thank you for visiting Apple Support Communities.
I understand that you are unable to use internet on any program that connects to the internet. This sounds like the issue would be with your internet connection. Try going through the troubleshooting steps in the article below.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
-Jason H. -
It is very frustrating. I have an old computer that I have to go to just to do half the things I want my new computer to do. Any advise?? Thanks
See this technote:
http://kb2.adobe.com/cps/000/6b3af6c9.html -
I have spent over 10 hours trying to upgrade elements 11 to elements 13. The 5 step process you sent me last night bears no relationship to what comes up on the computer screen. I have downloaded win 64 7z and win exe to no avail--nothing happens. What do I do??? How do I do it. I am an old man an do not understand computer talk. I need basic English. I really need someone to call me at 972-403-1515 and walk me through the process.
In addition you are now charging me for two programs---I only need one. How do we correct that?This is a community forum, not Adobe. Volunteers can often help but as you have a number of problems I would recommend you contact Adobe directly using the link below. Use the dropdown menu for boxes (1) & (2) to scroll down the list and choose:
1. Adobe Photoshop Elements
2. Adobe ID, and signing-in
3. Click on the blue button: Still need help? Contact us – then click the area marked chat 24/7, then click “start chat ”
It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away. Have your serial number available. The agent can directly troubleshoot your system if you agree to activate the Adobe Connect add-on.
Click here to get help now Contact Customer Care -
Why is my internet not working? It tells me that the server stopped responding
No internet connection, it says the server stopped responding
I recently encountered an issue like this with my friend's iPhone. Issue resolved once you change your password. Log in on your PC/MAC and change your password. Once you complete that, then try on your iPhone. Hope this workds for you.
Maybe you are looking for
-
IPhone 4S overheating on iOS 6.0.1.
I've had my iPhone for approx 2-3 days now and whe I got it, I installed iOS 6.0.1. immediately, everything was fine, my battery life is quite good when not using 3G but WiFi instead. However, after a day of having the iPhone 4S, in the evening I wen
-
Is there some facility to log messages from (helper) classes being called from servlet classes in Weblogic 5.1 (Something like log4J) ? I can use the log method to write messages to the log file in the main servlets,
-
Configuration Guide Job Scheduling Management with SAP Solution Manager
Dear Gurus Could you please help me with the configuration guide of the Job Scheduling Management with SAP Solution Manager Best Regards
-
Buenas, Estoy trabajando con un programa subvi desde mi ordenador a modo de control, y en mi modulo cRio tengo trabajando un programa en RealTime (con "Run as Start up") y el propio programa de la FPGA, configurado como "Run when loaded to FPGA". T
-
Hi Friends, How to know when the objects like InfoObjects,Infocubes, DSO etc has changed and by whom it has been changed. Is there any table which can capture the Object creation and changed objects history in the system. Regards Revathi