I am trying to number a list in pages.

I am trying to number a list. I have in my notes from class to do "1 2 3 then copy". This is not working. I want to number a list in Column A to where the column will automatically renumber if I remove someone from the list instead of having to manually renumber. Can anyone tell me how to do this?
Thanks!!

Every column in Numbers has each row numbered to the maximum number of rows. But you cannot configure a column like you want in Numbers because it isn't a word processor.
If you insert a new row then the new row takes on the appropriate number after the row above it. You should see all the row numbers on the left side of the spreadsheet. Will look like this:

Similar Messages

Trying to move a list of form variables to session variables of the same name

I am trying to move a list of form variables to session variables of the same name and I am having a lot of trouble.
I have never had to post of this forum with a language question in all the 10 years I have been using ColdFusion. I was a qa Engineer @ Allaire/Macromedia back when it was going from one to the other. I have a pretty good grasp of the language.
I have software that runs off a list. The fieldnames are variable and stored off in an array. It's survey software that runs off a "meta file". In this example; I have the number of fields in the survey set to 12 in the "metafile". I have each field declared in that file in array Session.SurveyField[1] and the above loop works fine. I include this "metafile" at the start of the process.
I cfloop around a struct and it works wherever I have needed to use it; such as here - writing to the database for example;
<CFQUERY NAME="InsertRec" DATASOURCE="Survey">
INSERT into #variables.SurveyTableName#
(EntryTime
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
,#Session.SurveyField[arrayindex]#
</cfloop>

   VALUES
    ('#EntryTime#'
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
<cfset thisname = "Session." & Session.SurveyField[arrayindex]>
,'#evaluate(variables.thisname)#'
</cfloop>

</CFQUERY>
NOW HERE'S THE PROBLEM: I am running into trouble when trying to move the form variables to session variables of the same name. It is the only part of the software that I still need the datanames hard coded and that is a roadblock for me.
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
<cfset thissessionfield = "Session." & Session.SurveyField[arrayindex]>
<cfset thisformfield = "Form." & Session.SurveyField[arrayindex]>
<cfset #thissessionfield# = #evaluate(thisformfield)#>
</cfloop>
I have tried it with or without the "evaluate"; same result. It doesn't give an error; it just ignores them (session variables look as such in the next page in the chain)
q01_name=
q02_acadtechorna=
q03_water=
q04_firstaid=
q05_cpr=
q06_lifeguard=
q07_aed=
q08_projadv=
q09_color=
q10_santaclaus=
q11_supervisor=
q12_supervisoropinion=
Note: they exist because I CFPARAM them in a loop like the above at the start of the procedure) - and this works just fine!
<cflock scope="Session" type="EXCLUSIVE" timeout="30">
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
<cfset dataname = "Session." & Session.SurveyField[arrayindex]>
<cfparam name="#variables.dataname#" default="">
</cfloop>
</cflock>
I EVEN tried exploiting the Form.Fieldnames list using CFLoop over the list and the same sort of logic within and it still gives me nothing....
Here's the FORM.FIELDNAMES value
"Q01_NAME,Q02_ACADTECHORNA,Q03_WATER,Q04_FIRSTAID,Q05_CPR,Q06_LIFEGUARD,Q07_AED,Q08_PROJAD V,Q09_COLOR,
Q10_SANTACLAUS,Q11_SUPERVISOR,Q12_SUPERVISOROPINION"
Here's the logic; SAME RESULT - The session variables don't get set.
<cfoutput>
<cfloop list="#Form.FieldNames#" index="thisfield">

<cfscript>
thisSESSIONfield = "Session." & thisfield;
thisFORMfield = "Form." & thisfield;
#thisSESSIONfield# = #thisFORMfield#;
</cfscript>
</cfloop>
</cfoutput>
The CFPARAM in a loop with variable output name works just fine; so does the post (which I included above) as does the SQL Create, Param Form Variables, Param Session Variables, etc.
THIS even works for moving BLANK to each session variable, to zero them all out at the end of the process;
<cflock scope="Session" type="EXCLUSIVE" timeout="30">
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
<cfset thislocalfield = Session.SurveyField[arrayindex]>
<cfscript>
thissessionfield = "Session." & thislocalfield;
</cfscript>
<cfset #thissessionfield# = "">
</cfloop>
</cflock>
Expanding on that code, you would think this would work, but it doesn't;
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
<cfset thislocalfield = Session.SurveyField[arrayindex]>
<cfscript>
thissessionfield = "Session." & thislocalfield;
thisformfield = "Form." & thislocalfield;
</cfscript>


<cfoutput>
<cfset #thissessionfield# = "#evaluate(thisformfield)#">
</cfoutput>
</cfloop>
And see that debug code in the middle? To add insult to injury... When I uncomment that it shows me this. So it certainly looks like this should work....
Session.q01_name = "Me"
Session.q02_AcadTechORNA = "N/A"
Session.q03_Water = "Yes (certificate expired)"
Session.q04_FirstAid = "Yes (certificate is current)"
Session.q05_CPR = "No"
Session.q06_LifeGuard = "Yes (certificate expired)"
Session.q07_AED = "Yes (certificate expired)"
Session.q08_ProjAdv = "Yes (certificate expired)"
Session.q09_Color = "Gray"
Session.q10_SantaClaus = "Yes"
Session.q11_Supervisor = "Da Boss"
Session.q12_SupervisorOpinion = "Not a bad thing"
There must be some simpler way to do this. This way won't work against all odds even though it seems so much like it should.
So I end up having to hardcode it; still looking for an automated way to set these #@%$*@!## session variables over the list from the form variables of the same @#@!$#%$%# name. Do I sound frustrated???
No matter what I do, if I don't HARDCODE like this;
<cfset Session.q01_name = Form.q01_name>
<cfset Session.q02_AcadTechORNA = Form.q02_AcadTechORNA>
<cfset Session.q03_Water = Form.q03_Water>
<cfset Session.q04_FirstAid = Form.q04_FirstAid>
<cfset Session.q05_CPR = Form.q05_CPR>
<cfset Session.q06_LifeGuard = Form.q06_LifeGuard>
<cfset Session.q07_AED = Form.q07_AED>
<cfset Session.q08_ProjAdv = Form.q08_ProjAdv>
<cfset Session.q09_Color = Form.q09_Color>
<cfset Session.q10_SantaClaus = Form.q10_SantaClaus>
<cfset Session.q11_Supervisor = Form.q11_Supervisor>
<cfset Session.q12_SupervisorOpinion = Form.q12_SupervisorOpinion>
I always get this from my next page because the session variables are empty;
You must answer question 1.
You must answer question 2.
You must answer question 3.
You must answer question 4.
You must answer question 5.
You must answer question 6.
You must answer question 7.
You must answer question 8.
You must answer question 9.
You must answer question 10.
I tried duplicate as well, but I can not get the above to work...
Can anyone help me do this thing that one would think is simple????

I think if you use structure array syntax you should get the results you want.
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
      <cfset session[Session.SurveyField[arrayindex]] = Form[Session.SurveyField[arrayindex]]>
</cfloop>
Or probably even easier.
<cfset session = duplicate(form)>

In FaceTime, my iphone number is listed, but it's incorrect. How can I change it?

In FaceTime, my iphone number is listed, but it's incorrect. How can I change it?

I've tried the resetting a few times for the network all reset all. It shows voda au for a few seconds then goes back to sos.
Unlocked by the carrier (optus)

IMessage waiting for activation. Phone number not listed in Send and Receive at?

I'm going to try to be as descriptive as possible, as I'm not too sure what else I can possibly do to resolve this issue.
3 or 4 days ago I requested a number change through my provider. Not knowing that I had to turn off iMessage whilst waiting for the change to occur, I left it on.
Later that day my friends were complaining that I was sending them texts from two different numbers, one being my new number, one being my old number. The thing is, I'm using the exact same SIM card and it's a little unusual to have two numbers for one SIM. I then realised that iMessage is ONLY registering my iTunes e-mail address and OLD phone number as an option to 'Send and Receive at'. I have spoken to Optus (my provider in Aust.) and Apple, I have gone into an Apple store, had the phone replaced, restored newtwork settings, restored phone altogether, turned on/off iMessage and Facetime, checked date and time, made sure my correct number is listed in Settings > Phone, etc etc etc I've done EVERYTHING listed in all forums that I've read from people experiencing this same issue.
I can choose to select my old phone number in iMessage, and can then send messages to others using iMessage from the old number, and if I switch it off, I'm then using SMS to send messages, and it's from my new number again! It's very frustrating not having all features on my phone working correctly.
If I switch iMessages and Facetime on, not using my Apple ID to sign in, it simply says 'waiting for activation' and after a few hours, tells me it was unsucessful and to try again. I'm all out of options now, Optus don't know what to do, Apple don't know what to do and I don't know what else to do! It's been 4 days! Someone please help!?

Just thought I'd let everybody know how it finally got resolved 1 week later!
After trying absolutely everything, and I mean EVERYTHING that Apple support, apple forums etc told me to do, the only thing that worked was turning iMessage off, waiting for at least 24 hours at then turning iMessage back on.
It activated itself within a few minutes, no dramas at all!
Hope this helps!

Phone number not listed in Imessage Caller Id

Okay i'm having a problem with my texts being sent as my email address using Imessage instead of my phone number. The problem is when I go into settings, messages, received at ect.... My phone number isn't listed there. It only has my email! It also doesn't allow me to select the email to delete it. My phone number is listed under phone in the phone settings, and will also show up as my number if I turn the imessage off. The country seems to be set up correctly and I have verizon so I can't take out a sim card. Any ideas on how to fix this?

Just thought I'd let everybody know how it finally got resolved 1 week later!
After trying absolutely everything, and I mean EVERYTHING that Apple support, apple forums etc told me to do, the only thing that worked was turning iMessage off, waiting for at least 24 hours at then turning iMessage back on.
It activated itself within a few minutes, no dramas at all!
Hope this helps!

TS3694 my phone has switched off for the second time this week, however when connecting to itunes the restore process wont complete. the error is 2006 however i have tried a number of USB cords, and none seem to be working.

my phone has switched off for the second time this week, however when connecting to itunes the restore process wont complete. the error is 2006 however i have tried a number of USB cords, and none seem to be working.
I am in the noerthern [parts of australia and accessing an apple store is not possiable for another month. this is my only soucrce or telecommunication. please help

This is what it says about error 2006
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.

I can't get imessages to recognize another iphone. Bubble turns green. the phone number is listed in contacts under iphone.

I can't get my iphone to recognize another iphone while imessaging. The bubble will not turn blue, it remains green. I have tried tapping it and it wont change. The phone number is listed in contacts under iphone.

Make sure your iMessage is activated. If the other person does not have a good data connection, iMessage will recognize that and fall back to a SMS. What you list the person's phone number as in Contacts does not matter.

How do I find out why there's a number 1 listed on my eBay app?

So I have a new notification number one listed next to my eBay app as it would be on Facebook notifications yet I can't find out who's notified me or why can anybody out there help

Try opening Notification Center by swiping down from the top of the screen.
Press the "All" button toward the top center.
The notification should appear there. You can clear it from there when finished.

Error: ORA-01722: invalid number performing List of Values query.

when i created a cascading select list, For the first time it worked properly then little later
it is giving this error.
Error: ORA-01722: invalid number performing List of Values query: "select distinct cl_name d, cl_no r from Kclient where gr_no = :P1_GRNO order by 1
could any one please solve the problem?
2. when i run the application. in all the items edit button is automatically seen
including in the login screen.
could any one identify what is the error and give me a solution.

Is this better?
select DISTINCT FIRST_NAME||' '||LAST_NAME display_value
      , ROW_ID return_value
from "PSA_RESOURCE_MANAGER"
where PSA_RESOURCE_MANAGER.ACTIVE_FLAG='Y'
   AND :P117_REPORTING_MANAGER = PSA_RESOURCE_MANAGER.REPORTING_MANAGER
   AND :P117_REPORTING_MANAGER <> -1 order by 1or
select DISTINCT FIRST_NAME||' '||LAST_NAME display_value
      , ROW_ID return_value
from "PSA_RESOURCE_MANAGER"
where PSA_RESOURCE_MANAGER.ACTIVE_FLAG='Y'
   AND :P117_REPORTING_MANAGER = PSA_RESOURCE_MANAGER.REPORTING_MANAGER
   AND :P117_REPORTING_MANAGER != '-1' order by 1Is ROW_ID a column in your table by the way? If not, you should use ROWID (without the underscore)

ORA-01722: invalid number performing List of Values query

I have a situation here where I want to pass string value(available in search field) to POP up key LOV on another page as default value.
I passed item value in default field in POPup key LOV item.I am able to see string value but It also gave me following error.
Error: ORA-01722: invalid number performing List of Values query: "select CUSTOMER_NAME, CUSTOMER_ID from (select customer_name, customer_id from hed_customers) wwvlovinlineviewname where CUSTOMER_ID = :WWV_LOV_RETURN_KEY_UTIL_1111".
Without Default value, it work like champ.
Please suggest how to get rid of this error
Thanks in advance

I hit the same problem.
The thing is that, in APEX, a 'null' value in a form is not really null but gets passed on as '%'.
When that gets compared to a number, 01722 will occur.
A workaround is to define a 'value if null' that is an implicit number, like '-1'.
And lets hope no one ever uses that as a real ID...
Cheers
Peter

Addition of new column /field PO number in list of shopping carts

Hi All,
We are working on SRM 6.0
We want to add new column (field) PO number in list of shopping carts on the Shopping Carts tab
Can anyone give me some pointers as to how to achieve this.
Thanks in Advance
Snehal

Hi,
Please be clear .. where you are going to add column ?
Standard report BBP_BW_SC2 available in that we can see the shopping cart status and follow on document (PO) information
Thanks & Regards,
prasad.s

Error Occur when trying to select Item List

Hi Experts,
Machine gets Hang when trying to select Item List in row level PO,SO ect as well as in item master Data when Pressing Star ( * ) .
and when trying to close this window then error occur as close the program and problem occur on server itself
Test Database is working fine.
worked around
1.Restarted the machine
2.Restarted services
using SBO 9.0 PL 7
OS-Window 7 Professional
Please Find the Two Error Attachments
Please help me
Thanks & Regards
Navnath

Hi
Check the below thread
SAPB1 Application Hang and Not responding when i serch item in any document
With Regards
Balaji Sampath

Powershell script to count number of list and library items in site collection

We are identifying large lists in our 2010 SP environment and I'm attempting to write code to output the total number of list items in a site collection.   I'm using the code below but it only displays column data for title and url.
What do I need to add so it can count the number of items in each sharepoint list and library?
Get-SPSite -WebApplication http://sharepoint -Limit All |
   Select -ExpandProperty AllWebs |
   Select -ExpandProperty Lists |
   Select ParentWebUrl, Title
I'm referencing
http://sharepointpromag.com/sharepoint/windows-powershell-scripts-sharepoint-info-files-pagesweb-parts

Please find belwo script, it will iterarte through all the folder/Subfoder to get the item counts from all list and library, you can modify this script to run this at site collection scope:
Note: save the script in .ps1 file and execute the script as described below to get log file, it will save the log file out.txt in seleted directory:
e.g.PS D:\PowershellScripts> .\ListItemCount.ps1 > out.txt
$SPWebApp = Get-SPWebApplication "http://weburl.com/"
foreach ($SPSite in $SPWebApp.Sites)
if ($SPSite -ne $null)
foreach ($SPWeb in $SPSite.AllWebs)
foreach ($list in $SPWeb.Lists)
$ListURL = $SPWeb.url + "/" + $list.RootFolder.Url
Write-Output $ListURL
[Microsoft.SharePoint.SPQuery]$query = New-Object Microsoft.SharePoint.SPQuery
#$query.Folder = fldr;
#Recursive Scope....
$query.ViewAttributes = "Scope='Recursive'"
$allitems = $list.GetItems($query);
$filecount = $allitems.Count;
Write-Output " No of item: " $filecount
if ($SPWeb -ne $null)
$SPWeb.Dispose()
if ($SPSite -ne $null)
$SPSite.Dispose()
You can update the code to get any specific list type item count, using if($list.BaseType -eq "DocumentLibrary") condition:
if($list.BaseType -eq "DocumentLibrary")
$ListURL = $SPWeb.url + "/" + $list.RootFolder.Url
Write-Output $ListURL
[Microsoft.SharePoint.SPQuery]$query = New-Object Microsoft.SharePoint.SPQuery
#$query.Folder = fldr;
#Recursive Scope....
$query.ViewAttributes = "Scope='Recursive'"
$allitems = $list.GetItems($query);
$filecount = $allitems.Count;
Write-Output " No of item: " $filecount
if ($SPWeb -ne $null)
$SPWeb.Dispose()
If my contribution helps you, please click Mark As Answer on that post and Vote as Helpful
Thanks, ShankarSingh

My phone number is listed incorrectly on your search engine. How did I fix it?

When someone is using Firefox and searches for the main number to Nova Southeastern University the phone number is listed wrong. How do I fix this???

Hello,
In order to better assist you with your issue please provide us with a screenshot. If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
Thank you!

Why can't I get text on my iPad? Roommate has iPhone and iPad like myself gets text both places. The only difference seems to be her phone number is listed before her email address. Can't get it to add my number.

Why can't I get text on my iPad? My roommate has a iphone and iPad like myself and she gets text. Only difference is her cell number is listed before her email address. My cell number is no there and won't let me add it.

I assume that you mean that you do have an iPhone because messages will not work with any other type of cell phone. You should be able to add your phone number in Settings>Messages>Send & Receive at>You can be reached by iMessages at, if your phone number is lited in there, select it and then uncheck your email address and then the iPad will be using the phone number just like the iPhone.
If you phone number is not listed in there, you probably have to sign out/turn off Messages on the phone and the iPad and then start over again on the phone - and then your phone number should be accessible to use on the iPad.
Read this support article and pay attention to the information at the very end.
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538

I am trying to number a list in pages.

Similar Messages

Maybe you are looking for