I am trying to transfer my upgrade to my second line. When I try to order any other phone it works fine, but won't work to upgrade to Iphone 6

TWRING,
Help has arrived! Since the device is currently on pre-order when processing the order online it will only recognize the line eligible. Once you receive the device you may activate it on another line if needed.
EfrainM_VZW
Follow us on Twitter @VZWSupport

Similar Messages

Hi my Mac says that I am connected to my wifi but when I try to go online to the start up page it won't work. I tried a dynastic at first it says something as changed but a few second after that it say it's fin but it still did not work.

Can anyone help me? I tried redownloading the software and then I even reset safari bet nothing happened when I came home after 3 hours it worked but 30 minutes later I turn it on it does not work.
I use airport.

I can't check for upgrades or any new software update, I can't accuss the Internet, and I can't watch what I want. I can't work on my homework, and I can't goof off I tried to look this problem up but no one else seems to have the same problem as me. I think it might have something to do with the server but I am not sure of to deal with it. I can't fix it on my own but even if I tried I think I would mess it up even more. Can anyone please help me i am in deep trouble I need it work by morning or I am screwed. :(

I have both i hoto and apeture on sidebar. When I try to open apeture the dot appears it bounces but won't open. Only if I transfer a photo from i-photo or my card reader? Any suggestions.

Apeture software. It won't open from the sidebar where i-photo lies also. Only when importing photos from i-photo, or card reader. Can anyone help with suggestion.

Hi Iolenslooker,
Welcome to the Support Communities!
It's possible you may need to replace the shortcut to Aperture that is on your Dock. I would suggest first closing both applications. Then open Finder, and in the Applications folder, double click on the Aperture application. If the Aperture launches, then you can delete the shortcut from the dock, and create a new one by dragging the Aperture icon from the Applications folder to the dock. The article below will explain more:
Mac Basics: The Dock
http://support.apple.com/kb/ht2474
To remove an item from the Dock, drag its icon an inch or more off the Dock and wait a couple seconds, then release; the icon will disappear in a poof of smoke.
Don't worry, you aren't permanently removing the item from your computer; you simply got rid of its Dock icon. If you want that item back in the Dock, locate the application, file, or folder in the Finder (or with Spotlight), and drag it back into the Dock.
Cheers,
- Judy

Hi there , I have Ipad 2. just upgraded to OS 5.1 and now cant transfer any videos to it. videos already stored can be played but when i try to copy any new video, it says that the video cannot be played by Ipad.I have tried mp4, mov, m4v but nothing play

hi there , I have Ipad 2. just upgraded to OS 5.1 and now cant transfer any videos to it. videos already stored can be played but when i try to copy any new video, it says that the video cannot be played by Ipad.I have tried mp4, mov, m4v but nothing plays.

Log in to the Developer forum. You will find instructions on how to install the lastest beta. Your problem is the beta you have installed has expired. All of them did on October 5; you will find hundreds of threads discussing this. If you have a beta it is assumed that you will continue as a beta tester, so a simple update using iTunes will not work.
If you no longer want to be a beta tester install the GM 7.0.2 by restoring from iTunes using DFU mode.

I have photos on my iphone 4 that i'm trying to transfer to iphoto. The problem is when I plug the phone in, it only wants to transfer the new photos, not all. How can I take all the photos off my phone and put them into iphoto?

I have photos on my iphone 4 that i'm trying to transfer to iphoto. The problem is when I plug the phone in, it only wants to transfer the new photos, not all. How can I take all the photos off my phone and put them into iphoto? Even if there are duplicates, I'd like to make sure I get all the photos from my phone into iphoto. Thanks

To see all the photos on the phone, including photos that have already been imported into iPhoto, deselect the "Hide Photos Already Imported" checkbox. If the camera contains photos that have already been imported into iPhoto, those photos are hidden by default.

I bought a factory unlocked iphone 4s. it was working fine but when i upgraded it to iOS 5.1 it gave me "no sim" message. so when i tried to restore the iphone setting it is giving me now "ICCID: unknown" message please help. any ideas?

i bought a factory unlocked iphone 4s. it was working fine but when i upgraded it to iOS 5.1 it gave me "no sim" message.
so i tried then to restore the iphone using itunes but it got worse it is giving me now "ICCID: unknown" message please help. any ideas?

Please define "factory unlocked". The term is basically meaningless. iPhones are sold either carrier locked or unlocked. Some carriers will unlock them after a period of time upon meeting certain requirements and paying a fee.
There are lots of places that will "factory unlock" an iPhone. This basically translates to "hack". This can cause permanent damage to the phone. Best case scenario is these phones will re-lock to the original carrier on an update or restore. Worst case it they become expensive bricks.
ICCID unknown indicates a critical failure. There is no way to resolve this other than taking it in to Apple and getting the phone replaced. It's very possible that the phone was hacked and attempting to update has now killed it.
Where, EXACTLY, did you get this phone?

Hello I have a problem with a Wifi Survey app, this app is from Access Agility, however this app was working fine, but without advise stop of working, I tried to open again, but app be close after few seconds.

Hello I have a problem with a Wifi Survey app, this app is from Access Agility, however this app was working fine, but without advise stop of working, I tried to open again, but app be close after few seconds. Every time that I tried to open it, in diagnostic and use create some files, in special one named LatestCrash-WifiSurvey.plist, this one generate an incident identifier E73B0164-CDFA-4E9E-839E-A0C021BD17A2, but this incident identifier change every time that I tried to open, the last incident identifier is: DE600EB3-AB57-4C33-8DE8-71F6788A7441.
After of it, I checked that the app had a new version available for downloading, I took a backup of my ipad and then upgrade this app, but is the same problem, all I want is to save the projects I had in this app, I´m afraid that if I delete this app and re-install it, probably I loss my projects.
Thanks for your help indicating how I can save my projects and see them for example in an iphone for assurance that data is not lost.
Something that called my attention is part of the log that shows a big CPU processing, but the strange thing is I killed all applications.
Incident Identifier: E73B0164-CDFA-4E9E-839E-A0C021BD17A2
CrashReporter Key:   ed0ca1405ce83d4f80cb3cce063d7248d7b76e91
Hardware Model:      iPad2,5
Process:         WifiSurvey [139]
Path:            /var/mobile/Applications/1BEEE35A-85FC-4BE4-B62A-39A930CB3CE2/WifiSurvey.app/Wi fiSurvey
Identifier:      WifiSurvey
Version:         ??? (???)
Code Type:       ARM (Native)
Parent Process: launchd [1]
Date/Time:       2013-08-08 19:01:13.476 -0500
OS Version:      iOS 6.1.3 (10B329)
Report Version: 104
Exception Type: 00000020
Exception Codes: 0x000000008badf00d
Highlighted Thread: 0
Application Specific Information:
com.accessagility.wifisurvey failed to launch in time
Elapsed total CPU time (seconds): 20.990 (user 20.990, system 0.000), 52% CPU
Elapsed application CPU time (seconds): 19.954, 50% CPU

See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

When I try to open a Pages file, I get a "need to upgrade" from 4.3. When I try to download it, I get the message "installed" and that's the roadblock. What to do, what to do?

I recently upgraded to Mavericks. Now, when I try to open a Pages file, I get a message that I must upgrade Pages from 4.3. When I click to download, I get a message "installed." I'm going around and around: Need to install; it's already installed. TIA.

You have 2 versions of Pages on your Mac.
Pages 5 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Older versions of Pages 5 can not open Pages 5.2 files and you will get the warning that you need a newer version.
Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Once opened and saved in Pages 5.2 files can not be opened in Pages 5.
Anything that is saved to iCloud and opened by newer Pages versions anywhere, is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has removed over 95 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
Peter

I have adobe editions 4.0 and I've been trying to get library books on my kobo for over 2 hours! The book goes onto my Kobo fine, but when I try to open in on my kobo it says, "Oops! The document couldn't be opened. It's protected by ADRM and is not curre

I have adobe editions 4.0 and I've been trying to get library books on my kobo for over 2 hours! The book goes onto my Kobo fine, but when I try to open in on my kobo it says, "Oops! The document couldn't be opened. It's protected by ADRM and is not currently authorized for use with your Adobe ID." It does it with every single book. I've never had this problem before. I've tried everything! Please help.

same problem for me. I am using abe edition 3 as I don't think 4 can be used with kobo. Book has been downloaded to kobo but it can't be read as it is not authorised.Help please

When trying to update Apps in iTunes on my computer my old Apple ID appears, which is no longer in use and has no password; even when I try to create a password for this Old ID, Apple won't let me. When I go into see my Account settings My new Apple ID /

When trying to update Apps in iTunes on my computer my old Apple ID appears, which is no longer in use and has no password; even when I try to create a password for this Old ID, Apple won't let me. When I go into see my Account settings My new Apple ID / iTunes ID are listed and the passwords are correct obviously so why can't I update my Apps? Why does my Old apple ID keep appearing and how can I get Apple to change this?

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

I have an old iPhone 3Gs with software version 4.3.5, I am trying to use it again, and it works fine, but I have not been able to update the software. Every time I try, I get the following message: "there was a problem downloading the software for the i

I have an old iPhone 3Gs with software version 4.3.5, I am trying to use it again, and it works fine, but I have not been able to update the software. Every time I try, I get the following message:
"there was a problem downloading the software for the iPhone, the network connection could not be established". This happens even though I have a working internet connection.
Besides that, all the other functions work properly, even synchronize apps and library.
Will I be able to update the software?

look around the forum tons of people repport that they can't update
makes you suspect that apples update servers can't meet the depand of too many users
trying to update at once

I just upgraded to Yosemite. Now when I try to open Excel, I get a message that there's not enough memory. When I check the storage under "about this Mac" it says I have 150 GB of 249 GB. Help please. Thanks

I just upgraded to Yosemite. Now when I try to open one particular document in Excel, I get a message that there's not enough memory. I can open other documents. The document I can't get to is the spreadsheet of my passwords. Go figure. When I check the storage under "about this Mac" it says I have 150 GB of 249 GB. I have a MacBook Air. Help please. Thanks, Connie

I just upgraded to Yosemite. Now when I try to open one particular document in Excel, I get a message that there's not enough memory. I can open other documents. The document I can't get to is the spreadsheet of my passwords. Go figure. When I check the storage under "about this Mac" it says I have 150 GB of 249 GB. I have a MacBook Air. Help please. Thanks, Connie

When trying to add music to a slide show from my PC to TV through Apple Tv the photos are fine but I get an error message that says the music cannot be downloaded.

When trying to add music to a slide show from my PC to TV through Apple Tv the photos are fine but I get an error message that says the music cannot be downloaded.

Because the location for each song in your library is on your hard drive. If the hard drive isn't there, how can iTunes play it?
You'll have to move/copy the music from your hard drive to your computer's hard drive.
Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
-Delete EVERYTHING from iTunes, so that your library is now empty.
-Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down. You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
-Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes. Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked. You can close Preferences now.
-Now, drag and drop your music from your hard drive into your iTunes library. iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
Shouldn't have any more problems...

I downloaded my sons ipod 4g to the new iOS and now when we try to sync it says we have no space, but there is nothing but a few apps on his ipod. I've tried to reset but that didn't help the problem. What can I do?

I downloaded my sons ipod 5g with the latest iOS and now when we try to sync it says we have no space, but there is nothing but a few apps on his ipod and he has plenty of space. The messege says that most of is space is taken up by video but there is no video or music on his ipod right now. I've tried to reset his ipod but that did not help the problem. What can I do?

Did you try to set it up again as new device?
How to back up your data and set up as a new device

I just upgraded my operating sytem to 10.6.8, to accomadate my sons new ipod which worked fine , but on plugging in my iphone 4 , itunes doesn't rcognise my phone , just says no camera found, help please.

I just upgraded my operating sytem to 10.6.8, to accomadate my sons new ipod which worked fine , but on plugging in my iphone 4 , itunes doesn't rcognise my phone , just says no camera found, help please.

Try Here > http://support.apple.com/kb/ts1591

I am trying to transfer my upgrade to my second line. When I try to order any other phone it works fine, but won't work to upgrade to Iphone 6

Similar Messages

Maybe you are looking for