I just upgraded my operating sytem to 10.6.8, to accomadate my sons new ipod which worked fine , but on plugging in my iphone 4 , itunes doesn't rcognise my phone , just says no camera found, help please.
I just upgraded my operating sytem to 10.6.8, to accomadate my sons new ipod which worked fine , but on plugging in my iphone 4 , itunes doesn't rcognise my phone , just says no camera found, help please.
Try Here > http://support.apple.com/kb/ts1591
Similar Messages
-
I have noticed an issue with utilizing the “stream” function on iOS 7. If you choose to just stream the movie by hitting the play button it seems to actually start downloading (which is fine) but if you are say halfway thru the movie and stop you can clearly see that storage has been reduced under the usage, yet under the “videos” tab it still states “No Data” the only way to delete what you have partially downloaded is to fully download the video, which is fine but there is no way to tell what videos have been partially downloaded (I.e which occurs a lot when your child switches between movies using the so called “stream” function). This becomes troublesome once the capacity of the ipad is almost met and you have no way to delete this data since you may have several videos that have started to be viewed (hence partially downloaded). Apple needs to somehow make it truly streaming or provide an update so the storage can be managed. The only way I have been able to remove partially downloaded videos is by doing a total software restore. (The video data that is in question when connected to my MacBook shows up in iTunes as “other”) if you have any insight into this issue it would be greatly appreciated. Thanks.
Here are the screenshots for what it's worth.
Not sure why I can't post them in the original post.<br>
<sub><b>Mod edit: See [https://bugzilla.mozilla.org/show_bug.cgi?id=718813 bug 718813]</b></sub>
'''Again, when I set my DNS server to automatically detect the servers both problems disappear and I have no issues at all.'''
IMO opendns is either doing this on purpose (unlikely) or they're under some sort of attack/being used to attack the specific torrent sites although I'm open to other explanations. I believe using the automatic setting for DNS is using my own ISP's DNS servers (which again, work fine... but still...)
I'd rather not use Google's public DNS servers as Google is to commercial these days and I think there's potential privacy issues.
'''Again I have changed the setting for DNS servers back and forth several times to duplicate/verify the issue(s)... and the issues only happen with the opendns servers.''' -
My Firefox is working fine, but there is a blue band at the top of the screen that says, "Downloading the latest applications," and it has a swirly, circle thing that indicates something is downloading, but it never stops or goes away. I updated to the latest version of Firefox, but the blue band is still there.
== This happened ==
Every time Firefox opened
== Just the other day. no matter how long the computer runs, it doesn't stop.This problem can be caused by the MSN® Toolbar (Tools > Add-ons > Plugins)
See [[Troubleshooting plugins]]
See [[Troubleshooting extensions and themes]] -
every version of firefox 6 won't open, I just get that crash report. Every time this has happened I reinstall firefox 5 which works fine. Anybody out there have a similar problem, any help would be appreciated
I had this issue. I went to c:\program files (x86)\Mozilla Firefox\
I renamed my plugins folder to plugins.old.
It recreated the Plugins folder and all was good again. I have since reinstalled the plugins I've been prompted to install. -
Adobe creative cloud has stopped working, all my individual programmes from adobe open and work fine, but when I try to open adobe cloud it starts to open then says adobe cloud has stopped working, looking for a solution then shuts down, I can not open it at all.
Without proper system information and the application logs nobody can tell you much.
Troubleshoot Creative Cloud download and install issues
Mylenium -
II've just setup a new iPad Air for my daughter with a new apple ect, everything is working fine, but I can't get it to redeem the I tunes voucher. It asks for I'd and password, put them in and comes up with wrong Id/password. They are not incorrect answers, but reset password just incase. Same problem. Also tried making another apple account. Same problem again can anyone help?? Please
Your iTunes Voucher is link to the old Apple ID.
-
I purchase my Mac approx 6 years, recently purchase Mac OS X Snow Leopard disk for my daughters new IPOD to work, computer is extremely slow, others refuse to use it, why is it slow, I know very little about this computer and have hated it from day one! Please help. The most I have on this computer would be photos, never downloaded movies, and have approx 40 songs.
The best option to make it faster would be to manually go through and erase all of the junk (files you never use) from the computer. If you want a much faster way (depending on how many files you have, this can take much longer), you can copy the files you'd like to keep to an external HD and then erase and reinstall OS X.
Erase and Reinstall OS X using the OS X Install DVD
Note: This will delete all data on the disk. Back up important files before continuing.
Erasing and then reinstalling OS X can give you a fresh start, making your computer exactly as it was whenever you received it from Apple. This can solve various problems such as corrupt system files.
Insert your OS X Install DVD into the computer's built-in disc drive (if applicable) or your computer's external USB disc drive.
Shut down the computer by going to Apple () > Shut Down…
Select Shut Down or allow the computer to shut down automatically.
Plug in the MagSafe power adapter into a power source and then connect it to your Mac if you have not already done so.
Press the Power Button to turn on the computer.
Press and hold the D key on the keyboard until the Recovery partition loads. If this does not work, shut down the computer, press the Power Button to turn on the computer, and then hold in the Alt (⌥) button immediately after you press the power button. Then, select the Mac OS X Install DVD to boot from the Mac OS X Install DVD.
Select Disk Utility and then choose Continue.
Select your startup disk (Macintosh HD by default) from the left.
Select the Erase tab.
Choose the Format pop-up menu and choose Mac OS Extended (Journaled), enter a name for your disk, and then click Erase.
After the disk is erased, choose Disk Utility > Quit Disk Utility.
Select Reinstall OS X and then choose Continue.
Follow the instructions.
I hope I helped. -
Tried to upgrade as instructed and after uninstalling and reinstalling (even back to the former iTunes which I was happy with)several times, keep getting message "Procedure entry point could not be located in dynamic link library" followed by "iTunes was not installed properly" "Error 7". Help, please??
Entry point errors can usually be fixed by deleting the offending dll, then repairing the component it is part of from the programs and features control panel. Unfortunately you neglected to include the detail of which dll is mentioned.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
I just got Apple TV it is working great but I can't get it to pair with my ipad2, they both search and the ipad says it is discoverable but they just won't connect. All my iCloud stuff has appeared successfully onto the apple TV
My sister in America has paired hers so it means you can use it instead of the remote it is much better when searching for a movie title or song
-
My MacPro is a dual quad core 2.8 intell processor system with 6 gig of RAM and 4 HDs. I recently upgraded the HDs from 500 gig each to 2 TB each. I did that by copying each existing hard drive to a new hard drive and then inserting the new hard drive where the copied drive had been. I followed all of the instructions for the OX system that came after copying and replacing the drive with the OX on it. Unfortunately now I can no longer use the 2 monitors that I used to use on the system. One monitor works fine, the second on is not found by the OX system and simply won't respond or receive a signal from the computer. Any ideas?
Have you tried a NVRAM / PRAM reset?
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
I have new ipod touch which shows mail messages, but when I punch to access, all I get are mail providers. How can I get rid of mail providers and see my messages since the correct mail providers are set up already?
I do not know what you mean by "punc to see all mail provider".
And also what does "I can't get rid of the providers to see my e-mails".
Maybe this will help
iOS: Troubleshooting Mail -
Please guide me what to do about the wifi problem. says wifi hardware not found!!!
Try an SMC reset: http://support.apple.com/kb/ht3964
Another option would be to install the Combo Update (yes, again): http://support.apple.com/kb/DL1726
If those don't solve it, take it in for repair. -
It doesn't start when I want it to and I have to use Chrome. Is it a problem with my computer or Firefox?
So you did a force quit and now you are trying to start it again right?
If so and the "beachball of death" is still spinning, deny the machine it's power source, remove the power cord and the battery and any periphials you have plugged in ie: extra drives etc. Let it rest for a minute plug it all back in then try re-starting in safe mode. If all is well shut down and restart normally.
If you get this far repair the disk and permissions using Disk utility.
Hope this helps
here is a link for the safe mode start-up: http://support.apple.com/kb/ht1455 -
I restore it, but when it's restored the same message comes up. Also, since I've done this, my Ipod restarts itself everytime I disconnect. HELP!!!
by reset option do you mean the DFU restore? worked for me, have you tried that?
if not - hold the lock and home button until the power down bar comes up. then hold the lock button for ten seconds - next continue to hold the lock button and press the home button for ten seconds - next release the lock button and hold the home button for 10 seconds. this should be done with the phone tethered. If done right and your itunes is configured as such, the phone will reload the drivers and start up itunes, and then prompt for a restore/update. -
Same error occurs in any device I use: iPhone (4) or iPad (2).
Any idea how to reset something, or otherwise let me make a purchase?And I just say for the record how much it ***** when you have to deal with a company who thinks so little of customer support, that you can't talk to anyone in person? Sheesh, the recording I got when I called hung up on me!
Maybe you are looking for
-
Exit/BADI/Enhancement for Payroll driver
Dear Friends, When we run transaction pc00_m10_calc for US payroll driver for an employee for a period,we can see the renumeration statement in the output screen. I need to modify the internal table xrt to add the similar wage types in one period bef
-
Hi can any one help i need to know how to connect my apple tv to my panasonic viera plasma Thank you
-
OnRollOver sound in a movie clip object
Scenario: I have a frame with a quiz question and three answer options. The three answer options are movie clips. Their instance names are q1_soundA, q1_soundB, and q1_soundC. I want each option to make a different sound when rolling over them. My s
-
Trying to get back into Flex here and I decided to try using it with PHP. I have set up AMFPHP 1.9beta I created a DataService class with a getUsers function. I have tested AMFPHP in with the browser and it creates the User objects properly and retur
-
ADFS3.0 - WIA returning 404 externally
Hi, Interesting scenario: ADFS farm behind a load balancing cluster for internal and external connections. Works as expected internally. Windows auth used for all standard browsers, internally and externally. No ADFS proxies Domain joined laptop "wor