I am unable to get the windows TIP for Tablet PCs to auto pop up when clicking with a stylus or my finger. What add-on/setting will fix this?
I have a lenovo Thinkpad Convertible tablet. In the past I've been able to get it were the Windows TIP pops up when I click on a text input field. This function no longer works, I have a new computer, and whatever change I'd done to my old computer is not readily apparent. Any help in getting text input fields to pop up the TIP automatically would be great. Until then, in tablet mode, I have to use my computer with IE or keep the TIP at the taskbar to click on, but that's a lot of movement and rather annoying.
Actually the setting is called: '''intl.enable_tsf_support'''
Note the underscore instead of the dot.
I had to enable this settings for TIP to work on my HP EliteBook 2740p after installing the driver from Wacom's website.
When I was using the Wacom driver supplied from Windows Update however the TIP worked even fine without this setting.
I've documented the issue and solution here at my blog for other Tablet PC users who encounter this problem: [http://www.unlogic.se/blogs/myblog/post/firefox-tip Firefox and the Tablet PC Input Panel (TIP)]
Similar Messages
-
Unable to get the admin object for the CsContainerAdmin service
Hi,
On AIX, we deployed XIR2 SP2 --> XIR2 SP3 --> SP3 Productivity Pack.
The Conection server does show up on the server list in the CMC, but on trying to access this server, it throws an error" Unable to get the admin object for the CsContainerAdmin service"
Tried to manually create another Connection server, same result.
Is this an issue that is addressed by a later FP?
Thanks in advance
Rajesh JayakumarHi Rajesh,
Were you able to resolve this issue? I am facing the same issue with almost every BOE 11.5 SP3 server on Windows.
For example, the Input file server says this -
"Unable to get the admin object for the FileServerAdmin service for server Input.BOCMSMSGT1.fileserver".
Getting the same error on WebI Report Server as well -
There was an error while retrieving data from the server: Unable to get the admin object for the WebiServerAdmin service for server BOPROCENG1.Web_IntelligenceReportServer.webiserver
Thanks,
Sarang
Edited by: Sarang Deshpande on Sep 26, 2008 3:08 PM -
I am on Oracle 11.1.1.7 BPM suite on W8 64 bit. I can't launch the flow trace and get the error "Unable to get the composite instance for the invocation. This could be because instance has not yet been created or because the audit level for the SOA infra has been set to Off". I have set the audit level to development at the soa-infra>SOA Administration> Common Properties > Audit level set to development and Capture Composite Instance State is Checked.
Can somebody advice.
ThanksCan you please confirm me the following steps...
Log in to the EM console, Expand soa-infra (soa_server1) , go to the partition where your composite is been deployed, Click on your composite, On the right, click on the dropdown Settings and choose Composite Audit Level. you can choose to set the Audit Level for this composite. If you choose Inherit, it will take the settings to what the server is being set to. Otherwise, we can override it by choosing Off, Production, or Development.
Make sure your setting for that composite is not Off, keep inherit or production or development.
Thanks,
N -
I bought the Mac version of Premiere Elements, can I get the Windows version for free or cheap with my serial number? I'm about to migrate back to PC soon and I'd love to not have to buy the program again since I just bought it. Under my order history though it only shows it for Mac so I wanted to make sure.
ihavea4
The boxed packaging is not sold by Adobe direct. If you want to explore that type of purchase which offers the perk of a Windows and a Mac installation disc, you need to purchase from an authorized reseller who is not going to offer you "upgraded pricing". The seller would be its own entity with its own pricing and own return/refund policy. Sometimes the authorized reseller price may be less than the Adobe"upgraded pricing".
Did you purchase your Premiere Elements 13 Mac from Adobe direct and are within 30 days of purchase? If so, you can contact Adobe Chat Orders to ask for return/refund. And, then you can explore the authorized resellers for pricing and availability of the box packaging. Maybe check out the pricing all around before making any final decisions.
Please review and consider.
Thank you.
ATR -
I have not been able to successfully back up my iPad to my MAC computer since 07/21/2013. I keep getting the error message "iTunes could not back up iPad "" because an error have occurred." Any suggestions on what I can do to resolve this error?
Hi there BuffaloSailor!
I have an article here with some troubleshooting suggestions for this issue:
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/ts2529
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
I am unable to restore my iPhone4, I have iOS6 and latest iTunes installed and when trying to sync or back up it comes up with Error −54. How or what do I do to fix this?
== Error -54 ==
From an OS9 reference, error -54 is a software lock on a file or a permissions error. (Some of the old codes still apply to OSX although there is no formal list of OSX error codes.)
First, try simply restarting your computer.
iTunes Library cannot be saved (Error -54) - https://discussions.apple.com/thread/1912814
Unknown error (-54) while syncing ipod - https://discussions.apple.com/thread/1082953 - problem was locked files
Why does iTunes keep showing a -54 error when I sync my iPad? - https://discussions.apple.com/thread/3727114
Error -54 possibly related to Touch Copy - https://discussions.apple.com/thread/3727114 - cleared by deleting preferences on iPad. -
Upgraded my iphone 4S to 8.0.2 and it won't go past the Hello startup screen or accept my Apple ID Sign in!!! It just restarts itself!!!
Help!!! What do I do to fix this??I doubt that your data have been lost, the hard drive should be fine. Too bad that you're going to sell it, you could have used the hard drive in an enclosure to back up your new computer to. Please remember to make frequent backups/clones, I use SuperDuper! and it works perfectly. I have used it to re-clone a drive from the external when things have gone bad, you can also boot from a SuperDuper! clone.
Anyway, let us know how things go, I'm pretty sure your drive will be fine. -
When I attach a JPG file in my email message and send it to a Windows friend they get the message "The file type being saved or retrieved has been blocked when they try to open it so that they can save it." Anyone know why and how to fix this problem?
Your Windows friend should ask in a Windows forum why his email client won't open attached jpg files. We have no idea what email client he is using or how his Windows security is configured.
-
Unable to Get the Data Using For All Entries
Hi everybody, i am using for all entries in a program. but when i am writing a code using for all entries i am getting an error as
Where condition does not refers to the FOR ALL ENTRIES tables...
SELECT KUNNR
NAME1
ORT01
LAND1
FROM KNA1 INTO TABLE ITAB1 WHERE KUNNR IN S_KUNNR.
IF NOT ITAB1 IS INITIAL.
SELECT VBELN
ERDAT
KUNNR
FROM VBAK INTO TABLE ITAB2 FOR ALL ENTRIES IN ITAB1 WHERE KUNNR = IT_KNA1-KUNNR.
ENDIF.
can anybody help out in this
regards
hyder aliThe correct one may be like this:
SELECT KUNNR
NAME1
ORT01
LAND1
FROM KNA1 INTO TABLE ITAB1 WHERE KUNNR IN S_KUNNR.
IF NOT ITAB1 IS INITIAL.
SELECT VBELN
ERDAT
KUNNR
FROM VBAK INTO TABLE ITAB2 FOR ALL ENTRIES IN ITAB1 WHERE KUNNR = ITAB1-KUNNR. "modified here
ENDIF.
Edited by: XuJian84 on Mar 9, 2010 4:25 AM -
I have already tried turning the power off and back on, holding the home and power button for ten seconds and shutting it off that way, and disconnecting from the wifi. None if those fixed the problem. However, resetting all of the settings did actually fix this issue, but then when I turn the ipod off and on again the issue is back. I don't want to have to keep resetting the settings on a daily basis, so what else can I do to fix this bug? Any help will be greatly appreciated. Thank you.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
I just recently downloaded Firefox 5.0 and it appears that they have changed or deleted one of my favorite features. It used to be that when I opened a new tab it would displayed like 9 of my most visited sites. Is this still possible with Firefox 5.0 or is it permanently deleted? If it is possible, how do I alter the settings to get this feature back? Thank you.
As far as I know, this has never been a feature of Firefox's core. Do you have an addon such as New Tab JumpStart or New Tab King that gave you this feature in Firefox 4? It's possible that whatever addon gave you this feature before hasn't been updated to work with Firefox 5. If you don't want to wait for that addon to update, you could try either of the addons I mentioned above.
Here's NTJS: https://addons.mozilla.org/en-US/firefox/addon/new-tab-jumpstart/
And NTK: https://addons.mozilla.org/en-US/firefox/addon/new-tab-king/ -
Title says it all. Lightroom shuts down because it can't read from its preview cache.
Have a look at this thread the solution is there.
I get an error message when I open Lightroom -
My i tunes account is authorized on 5 computers. However all but 1 of them has crashed or broken and I now longer have them. Due to them breaking i was not able to remove itunes from them. I have now purchased a new computer and due to the 5 limit I am unable to authorize my new one. Is there anything that I can do about this with out loosing all my purchased music? I use music for my business and it is extreamely important that I don't loose it. please HELP!!!
Use the Deauthorize All function documented in that article; while it won't delete your music, you should have a backup of it anyway.
(76771) -
I have followed the instructions exactly according to Apple for making phone calls from my Macbook Air. Im signed in to iCloud on both devices. Im on the same wifi network. Wifi calls is turned off on my iPhone. Any suggestions?
Howdy jcannon130,
Thanks for using the Apple Support Communities.
To troubleshoot this issue where your Mac believes you iPhone is still on a call while trying to make a call from your Mac, please first reset your iPhone, and then verify you have the settings configured correctly on your Mac and iPhone.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Get help using Continuity with iOS 8 and OS X Yosemite - Apple Support
Happy Holidays!
Alex H. -
Please can anyone help me..I am not able to sync my iPod.!
Have you carefully worked through all the troubleshooting in this Apple support document?
iPod nano: Error message saying that iPod 'could not be identified properly'
Did this iPod previously work with this iTunes installation/library?
B-rock
Maybe you are looking for
-
[CS3] How to get the path of a graphics item?
Hallo! I want the path, e.g. "C:\test.jpg" of a graphics item on a page. How to get it? Thanks, Alois Blaimer
-
TG shows Zero count in segment builder
In some cases i have seen when i create TG , it shows zero count. Sometimes it may be the case that filter select may not correspond. Can you suggest what other reasons could be?
-
My macbook is secondhand. So it has the name of a former user. The reseller told me that it is not possible to change the name of the computer (as shown in the Finder in the owners map). Is this really impossible?
-
Run time error in delivery document
I am doing standard Order To Cash process i will get an run time error in PGI time
-
I am using Illustrator CS5 on Windows XP. I have a layer containing type of various font sizes. Is there a way to select type of a particular font size? Is there a script that I can use to achieve this. I have searched through the forum and have seen