I am unable to install iTunes due to update (vista)

I was prompted to update my iTunes to the latest version (along with QuickTime). when I clicked update, it deleted the old iTunes and made a shortcut, but I am unable to use iTunes or QuickTime. when I tried to reinstall them it opened the installer and just when it was almost done (publishing product information) it brings up a message saying   "An error occurred durring the intallation or assembly 'mictosoft. VC80.CRT,type=''win32" , version="8.0.50727.6195" ,publicKeyToken=" 1fc8b3b9a1e18e3b" .processorArchitecture="x86'" .please refer to help and support for more information. HRESULT: 0x800736FD"

I finally got the program to install/run.  I downloaded a third copy and saved it again on the desktop.  I selected "Run as Administrator" instead of "Run"  It must have been the 10th plus time I tried to install, but this time it completed.  I don't know if the "Run as Administrator" was the key since it is Vista, or if I just got lucky. Either way I am relieved.

Similar Messages

  • I am unable to install iTunes due to Windows Installer error message on Vista

    I needed to update my iTunes since I purchased the iPad2.  My Windows Vista machine will not allow me to update the program due to a "Windows Installer" error message.  I first attempted to update, then I uninstalled and am unable to reinstall the software."There is a problem with this Windows Installer package. A program required for this install to complete could not be run..."

    I finally got the program to install/run.  I downloaded a third copy and saved it again on the desktop.  I selected "Run as Administrator" instead of "Run"  It must have been the 10th plus time I tried to install, but this time it completed.  I don't know if the "Run as Administrator" was the key since it is Vista, or if I just got lucky. Either way I am relieved.

  • Unable to install itunes due to 80070422 error using Win7?

    Please, please, please can someone help me resolve this error when trying to load itunes 10 - have tried everything , reg fixers, reinstalling windows components etcetc but still can not fix. The only thing left is to reimage - and not want to go down that route. Can any one help please?
    I am using Win7.
    Have retried with Visual C - but still same - have spent most of day trying to find cure - but getting nowehere. Have also problems with auto update asking to update same three files - yet each tme saying successful. I really dont want to use the system recovery disc as will wipe out all my files and settings. Appreciate any other advice please?

    Hello laguiole,
    The following article may be helpful in getting iTunes updated.
    Troubleshooting iTunes installation on Mac OS X
    http://support.apple.com/kb/HT2311
    Cheers,
    Allen

  • Unable to install itunes 10.1 on vista 64-Bit

    Hi, I have been trying to get itunes 10.1 installed on my vista system so that I can use my new ipod touch. I have tried the update within itunes, but it just stops without anything happening. I have tried downloading the 64-Bit version but the it says "The Windows installer service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance."
    I have tried multiple different things suggested through google, and some on here regarding trying to get the windows installer to work, but have had no success. I was wondering if anyone has a solution?

    Yeah I have Office but it is working fine, along with all other programmes I have installed. Is it worth uninstalling Office?
    No no! We'll leave that in place.
    Okay ... let's try a re-registration of both your 32-bit and 64-bit Windows Installer Services.
    In your start menu, in your Start Search, type cmd then right-click on the cmd that comes up and select "Run as administrator".
    At your command prompt:
    Type *%windir%\system32\msiexec.exe /unregister* and hit enter.
    Type *%windir%\syswow64\msiexec.exe /unregister* and hit enter.
    Type *%windir%\system32\msiexec.exe /regserver* and hit enter.
    Type *%windir%\syswow64\msiexec.exe /regserver* and hit enter.
    You can close your command, now.
    Are you able to do an iTunes install now?

  • Unable to install itunes 11.1 Windows Vista

    Downloads then when tries to install.....ERROR. I have tried downloading directly from web but it has been sitting gathering required information performing installation tasks window for over an hour. I have disabled Norton....rebooted....nothing allows it to install. All went well on a Windows 7 machine. So assuming its something with Vista. AND I am up to date with all service packs and Windows updates.

    See if this post from turingtest2 helps : https://discussions.apple.com/message/24620553#24620553
    He's also produced this user-tip for trouble-shooting updates to iTunes on Windows : https://discussions.apple.com/docs/DOC-6562

  • Unable to install iTunes or iPod updater - Get InstallShield message

    Just got an iPod nano and can't get very far.
    When I try install iPod or iTunes I get the following dialog message with just an OK button
    Dialog titled: InstallShield
    Command Line Parameters:
    /L language ID
    /S Hide Initialization dialog. For silent mode use: /S
    /v/qn.
    /V parameters to MsiExec.exe
    /UA<url to InstMsiA.exe>
    /UW<url to InstMsiW.exe>
    /UM<url to msi package
    Click OK button and of course nothing happens.
    Help!!!!!!!!!!!!!!!!!!

    hi Larry!
    Command Line Parameters
    we don't know what causes that one, but we've got a workaround that typically works for the itunes install. (i'm not sure i've seen this before with a software updater install, but the same technique is worth a try with that).
    first, download and save copies of the installers to your hard drive.
    then google for and download a copy of WinRAR and use it to open the iTunesSetup.exe (installer) file. the free trial version of WinRAR seems to be working for people for these purposes.
    if that works for you, let's give the same technique a whirl for the ipod software installer file.
    keep us posted.
    love, b

  • Unable to install itunes 7 due to error "Bonjour service failed to start, verify you have sufficient privileges" mcafee is not blocking it, please help anyone?

    I am unable to instal itunes (greater than version 7) as it gives me the error,"Bonjour service failed to start, verify you have sufficient privileges" , i have checked on apple support and the only help for this error says that mcafee antivirus is blocking the services however i have never had mcafee installed on my pc. Anyone any other ideas as to what could be wrong?

    Hi doywks,
    The Apple Mobile Device is a component of iTunes that communicates between your computer and your iPhone or iOS device.  The error message you are seeing "verify that you have sufficient privileges to start system services" has to do with the Windows operating system.  It's possible that you are not logged in as the administrator for your Windows PC.  Or, you may have antivirus software stopping the Apple Mobile Device from running.  
    If you are having issues updating iTunes on your PC, follow the steps in the article below.
    If you can't install or update iTunes for Windows - Apple Support
    https://support.apple.com/en-us/HT201668
    How to restart the Apple Mobile Device Service (AMDS) on Windows - Apple Support
    https://support.apple.com/en-us/HT203188
    I hope this information helps ....
    - Judy

  • Unable to install itunes in windows 7 64 bit - hanging

    Unable to install itunes in windows 7 64 bit - screen is hanging after first few steps ...
    Also i am unable to uninstall Apple update software. Are these both related.
    Now how do i get the software installed( itunes installed in windows 7)

    Hey gigipramod,
    Thanks for the question. I understand you are experiencing issues installing iTunes. The following resource may provide a solution:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thanks,
    Matt M.

  • Unable to install iTunes 11.1.4.62 on Windows 8. I get Service "Apple Mobile Device" (Apple Mobile Device failed to start.  Verify that you have sufficent privileges to start system services.  I am trying to install this on my desktop not a mobile device.

    Unable to install iTunes 11.1.4.62 on windows 8.  I get
    Service "Apple mobile Device) failed to start. 
    Verify that you have sufficient privileges to start system services.
    I am trying to install it on my desktop.  I am also in Administrator mode.  My iTunes stopped working when I was notified that there was a new version of iTunes and would I like to download it. I said yes as always and it was unable to finish the update because of a
    runtime Error!
    Program: C:\program Files (x86)\iTunes\iTunes.exe
    R6034
    An application has made an attempt to load the C runtime library incorrectly.
    Please contace the application's suport team for more information.
    My iTunes stopped working at this time.  I thought I could delete iTunes and start over. This tactic did not work.
    Can anyone make sense of what I am saying and help me to get my iTunes back again?

    Try a more recent version of my advice. The "for older video cards version" may work when the default version doesn't.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • Can't install itunes due to a problem with windows installer package

    hello there i can't install itunes due to a problem with the windows installer package i found a page on this site (here is the link) http://docs.info.apple.com/article.html?artnum=304405 i done every thing on it and i still haven't been able to fix the problem i have tryed the following unstalling itunes deleteing the registry keys deleteing all the temp files disableing all anit-virus software and anit-spyware. runing cc clearner downloading a new installer for itunes and windows installer and the script thing. and trying to reinstall. nothing seems to work i don't know what else to do this is the error message i get when i try to install i tunes. "there is a problem with this windows installer package.
    A program required for thsi install to complete could not be run.
    Contact your suupport personnel or package vendor."
    Please Help i would be most greatfull for any advise given
    Message was edited by: Joe_TLC

    I pulled my brains out trying to figure this bug out and I may have a solution for you.
    All of it installed fine in my desktop, but a friend's laptop got the error you mentioned on quicktime, itunes, flash, officeXP and about anything else I tried to load for him.
    If you look in: C:\documents and settings\<username>\Local Settings\Temp there will be an iTunes install log...open it in Notepad and see if it isn't exiting with a 1619 error while running msiexec.exe
    If this is the case, this fix should work for you.
    Seems some configurations of XP (and possibly Vista) aren't allowing full administrator rights to the account you set up when you installed XP (even though User Editor says you do have those rights.)
    I read 2 MS articles and turned off simple file sharing, then gave ownership of the entire C: drive to the administrator. Logged the admin account off, logged his "admin" account in, and then gave rights to his personal directory to his account (c:\docs and settings\<username>)
    Once I did that, every install that had previously errored out performed flawlessly.
    The MS articles in question:
    http://support.microsoft.com/?kbid=316309 (1619 error)
    and
    http://support.microsoft.com/?kbid=308419 (how to set special permissions)
    Hope this helps!
    Doc

  • Unable to install itunes 10.4.1 on my dell laptop windows 7 64 bit

    Hello
    I am unable to install itunes 10.4.1 on my dell laptop windows 7 64 bit:
    i have tried to install itunes on my windows 7 64 bit dell laptop, and everytime it says installation successfully installed, but i can't find the files anywhere in the computer, i searched all the locations, desktop ... but nothing found.
    Troubleshooting Done:
    - Tried different itunes versions; didnt work.
    - Tried to install on different locations on my computer.. C:, D:...  didnt work.
    - I empty Temp files from all users on my computers who are (Me & Admin) only; didnt work.
    - i removed all related apple files; same.
    - Uninstall all apple related support ... etc..; didnt work.
    - I have Admin access to all my files and also tried to install from Admin account; didnt work.
    I don't know what else i can do, please advise me on how to fix it, i need to backup my iphone & ipad ASAP.
    Please contact me via email, phone anytime and as soon as you can.
    Thanks for your support
    Ashraf Badi
    <Personal Information Edited by Host>

    Hi Nitro,
    Tried your advise but that too failed. Problem still continues. Again that same error  "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor".
    Please advise.

  • Unable to install iTunes after converting from Windows Vista to Windows 7.  Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).

    Unable to install iTunes after converting from Windows Vista to Windows 7.  Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).  I have my iPod plugged into my computer via USB port.  What am I doing wrong?

    i have the only account on my laptop so have checked and am the account administrator
    i run windows 7 home premium
    I have the same problem and
    have followed the link uninstalling in the correct order,
    then restarted as per instructions,
    went to Apple to download itunes,
    hit download now,
    Visit the iTunes download page. Click Download Now to download the iTunes installer. When prompted, click Save (instead of Run).
    did not get a save instead of run prompt
    Right click on iTunesSetup or iTunes64Setup (the installer you downloaded in step 3).
    If you have Windows Vista, Windows 7, and Windows 8: Choose "Run as administrator."
    i can only click run as administrator from right clicking the shortcut on my desktop screen
    If iTunes fails to install or repair, it might be necessary to remove components left from a previous installation of iTunes and then reinstall.
    sick of doing this
    at least 7 or 8 times i have re installed itunes to no avail
    troubleshooting no better
    please help. pulling my hair out at this stage
    it was working fine until 2 days ago when i opened itunes it offered to update to 12.1
    not working since i clicked yes
    also i have gone to restore previous point and ffs there are no restore points before my multiple reinstalls
    really dont want to have to restore factory settings

  • Unable to install Itunes 10.1 or 10.1.1  -Apple Mobile Device USB Driver

    Unable to install Itunes 10.1 or 10.1.1 and have it sucesfully install the Apple Mobile Device USB Driver. It keeps coming up with an error that the driver is unsigned or disappears completely from device manager.
    I have tried full uninstall including cleaning registry keys and file system. If I uninstall and re-install 9.2.1 usb driver works perfectly and I have no issues synching with phone or seeing the phone in Itunes.
    I have tried repair installs, updating the drivers by pointing to C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
    I have tried removing all USB devices and having them reinstall from Windows after a reboot. Nothing seems to work.
    I just got a new IPAD and cannot use it because I cannot install 10.1 at least to have it connect. It came with IOS 4.2.1 on it.

    I also encountered the same problem.
    and yes, I uninstalled and reinstalled itunes 10.1.1 bla bla blahhh....
    Same issue!!! itunes cannot open cuz the mobile device support not started etc..
    but when reinstalled prior itunes version 9.2 its gone
    and issue fixed.
    i can sync my 3G.
    but not my 4G. it says you need to upgrade to 10.1 or above
    spending the whole night to fix the problem which never occured b4
    i finally find out one thing.
    pl keep in mind im not a computer exprt
    i tried this and it worked, i don know what fixed it, bt it works
    try this at your own risk. some comp genius will tell us weather this way is right or not.
    ok. lets start...
    in your desktop make a new folder. name it Kmh_\CoreFP
    try uninstalling the newer version 10.1
    only the itunes not other mobile div suprt, application suprt etc.
    dont mind the following order:http://support.apple.com/kb/HT1923
    and reinstall itunes 9.2
    go to C:\Program Files\Common Files\Apple
    you wil find a folder named "CoreFP"
    copy it and paste to Kmh_\CoreFP
    uninstall itunes 9.2
    and reinstall itunes 10.1 again
    go to C:\Program Files\Common Files\Apple
    you wil find folder named "CoreFP"
    find the difference in properties comparing the one u stored in Kmh_\CoreFP
    ok delete it and replace it with the one we stored stored in Kmh_\CoreFP
    restart the computer and start itunes now
    what happens?
    best of luck.
    -Kmhm63
    reinstall the newer version 10.1
    I would suggest that you revert back to prior working version until Apple comes out with an update that fixes what 10.1.1 broke.

  • Unable to install itunes 10,5.I receive this message: there is a problem with this window installer package. A program required for nthis install to complete could not run. Contact your support personnel or package vendor.Am using window ultimate 64 bits

    I am unable to install itunes 10,5. I receive this message: There is a problem with this window installer package. A program required for this install to complete could not run. Contact your support personnel or package vendor. I am using window 7 ultimate 64 bits

    There is a problem with the Window installer package. A program required for this intall to complete could not be run. Contact your support personnel or package venfor.
    Perhaps let's first try updating your Apple Software Update.
    Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
    If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

  • I am still unable to install itunes in Windows Vista

    I have tried to run Fix it 4 times now after doing other things suggested in the Apple community and I am still unable to install itunes. Do you have any other ideas?
    I've been uninstalling/reinstalling and using CCcleaner, sfcscannow and nothing seems to correct error msg 2- corrupt files found/unable to fix.  Now what??????
    I am using windows Vista.  I NEED help!

    nothing seems to correct error msg 2
    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Maybe you are looking for

  • Code in the module not triggered..

    hi, i have designed a screen with 2 radio buttons, aa and bb. its associated program is of Type M and named as SAPMZXXXXX and screen number is 100. i created 2 subscreens in the same program SAPMZXXXXX , number 101 and 102. now by default the first s

  • Any table to check A version of datasource in development and quality syste

    Hi Experts, 1. Do we have any tables to check A version of objects once the datasource moved to quality system?... 2. I have moved some datasources from development to quality system and in the log of the request i am seeing the error message like be

  • Question about uploading videos/movies

    hi guys and gals i just recently bought a 30GB ipod video for my little cousin and he asked me a question that i do not have an answer to. he knows how to upload music from his itunes to his ipod (drag music into the ipod icon) but he can't figure ou

  • Memory Consumption: Start A Petition!

    I am using SQL Developer 4.0.0.13 Build MAIN 13.80.  I was praying that SQL Developer 4.0 would no longer use so much memory and, when doing so, slow to a crawl.  But that is not the case. Is there a way to start a "petition" to have the SQL Developm

  • Power book G5 flashing ? mark !

    my power book G5 is doing nothing but flashing a ? mark on the screen, it won't display anything, help please.