I am unable to proceed to a blocked site.

When I try to visit the site, www.thehun.net I get the following:
Webroot has blocked access to a potentially threatening site
http://www.thehun.net/
This Web site has exhibited suspicious behavior or is similar to Web sites that are known sources of malware, viruses and spam. Visiting this site may put you at risk or compromise your identity or privacy.
Proceed to blocked site
When I click Proceed, I get some unknown site that looks like a Google page.

As a workaround kill the Firefox and any related processes e.g. plugincontainer.exe using for instance task manager
* [["Firefox is already running but is not responding" error message - How to fix it]]
'''IF'''' you have Firefox set to clear History at close down it is probably a known bug. Set Firefox to remember History.
* New Button -> Preferences -> |Privacy| History Firefox will [Remember History v]]
You can use Private Browsing Windows if it helps, but you may need to close these before closing down Firefox
* [[Private Browsing - Browse the web without saving information about the sites you visit]]
The bug is being worked on. if you do not wish to wait for the fix to get to the Release There is a possible fix in the Beta channel version of Firefox
* http://www.mozilla.org/en-US/firefox/channel/#beta/beta-desktop
(If you consider installing that do NOT use any option that deletes personal information; do not delete the profile - In fact there is no need to uninstall Fx29 just install Fx30 over the top of it)

Similar Messages

I do not have the 'Advanced' tab on the menu bar. I am trying to change ringtone on my iphone 4s. Have done the following: Right cick on song, entered the start and stop times, but unable to proceed as need 'Advanced' tab in order to change to option.

I do not have the 'Advanced' tab on the menu bar. I am trying to change ringtone on my iphone 4s. Have done the following: Right cick on song, entered the start and stop times, but unable to proceed as need 'Advanced' tab in order to change to option.

You don't need to upgrade your software. But if you're struggling with Spry, IMO you should cut your losses and switch to something better for the longrun.
If you have a budget to work with, I highly recommend Project Seven's Pop-Menu Magic 3. It's easy to use in DW CS4, 5, 6 or CC. More importantly, it's bullet proof and works in all devices.
Pop-Menu Magic3 by PVII (commercial DW extension)
http://www.projectseven.com/products/menusystems/pmm3/index.htm
If you don't have a budget to work with, you can roll your own menus with jQuery plugins. A bit more effort on your part, but they perform better than Spry.
jQuery Superfish
http://users.tpg.com.au/j_birch/plugins/superfish/
jQuery MegaMenu2
DEMO:
http://www.geektantra.com/projects/jquery-megamenu-2/
DOWNLOAD:
http://code.google.com/p/jquery-megamenu/
Nancy O.

Unable to proceed in change document are not updating in CDHD, CDPOS tables

Hi all,
This is a question related to Change document.
I created one custom Change document object ZBUDGETS.
As I am trying to place a trigger on FMIT (Total Funds Management) table I created a Change document object ZBUDGETS.
I included some of the authorized fields from FMIT table on which we placed the trigger.
And of course all those fields are change document enabled in the data element level. I generation of the update program was completed. And I got the function module zbudgets_write_document along with some include programs and structure.
Everything is fine, But i am unable to get this change document generated information to these tables are CDHDR and CDPOS.
the problem is when I make any expenditure like PO Posting, it will be logging in the FMIT table and the respective fields also updating. With this the Change document object should trigger and it should send the record in CDHDR and CDPOS tables. This is not happening. If the records are getting updated in the CDHDR and CDPOS tables I can use those include programs and function modules in my program to retrieve the changes in FMIT table.
Since I am unable to proceed further since the documents are not updating in CDHDR and CDPOS tables.
Prabhakar

CDHDR and CDPOS will not be populated with entries only by creating the change document object.Change documents will be written to CDHDR and CDPOS tables only if the function zbudgets_write_document is called in the transaction which updates FMIT.
You need to find an use exit in the transaction updating FMIT and call the function zbudgets_write_document in that exit.
Refer the below link http://help.sap.com/saphelp_47x200/helpdata/en/2a/fa01b6493111d182b70000e829fbfe/content.htm
-Kiran
*Please reward useful answers

ORA-27047: unable to read the header block of file

My Windows 2003 crashed which was running Oracle XE.
I installed Oracle XE on Windows XP on another machine.
I coped my D:\oracle\XE10g\oradata folder of Win2003 to the same location in WinXP machine.
When I start the database in WinXP using SQLPLUS i get the following message
SQL> startup
ORACLE instance started.
Total System Global Area 146800640 bytes
Fixed Size 1286220 bytes
Variable Size 62918580 bytes
Database Buffers 79691776 bytes
Redo Buffers 2904064 bytes
ORA-00205: error in identifying control file, check alert log for more info
I my D:\oracle\XE10g\app\oracle\admin\XE\bdump\alert_xe I found following errors
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Wed Apr 25 18:38:36 2007
ALTER DATABASE MOUNT
Wed Apr 25 18:38:36 2007
ORA-00202: control file: 'D:\ORACLE\XE10G\ORADATA\XE\CONTROL.DBF'
ORA-27047: unable to read the header block of file
OSD-04001: invalid logical block size (OS 2800189884)
Wed Apr 25 18:38:36 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
ORA-00202: control file: 'D:\ORACLE\XE10G\ORADATA\XE\CONTROL.DBF'
ORA-27047: unable to read the header block of file
OSD-04001: invalid logical block size (OS 2800189884)
Please help.
Regards,
Zulqarnain

Try to install win 2003 server software, do the fresh installation of oracle software, now copy the datafiles and controlfiles to same locations as you did on winxp.
get back to us, if still not out of the woods. I still doubt that a simple restore would do the trick, since you doing it across different platforms, might be I can be wrong, but this is what I personally feel, you not able to start the database on winxp.
hare krishna
Alok

Testcase for error - "Unable to allocate thread control block"

Hello,
The down-below code throws the error message:
db_stat: Unable to allocate thread control block
BDB: 4.8, OS: Ubuntu 9.10
Thanks
#include <stdlib.h>
#include <sys/ipc.h>
#include <db.h>
#define DIRECTORY "/tmp/db"
int main()
// open environment
DB_ENV *handle;
int status = db_env_create( &handle, 0 );
status = handle->set_cachesize( handle, 0, 32*1024*1024, 0 );
status = handle->set_thread_count( handle, 0x100 );
key_t key = ftok( DIRECTORY, 'M' );
handle->set_shm_key( handle, key );
u_int32_t flags = DB_CREATE | DB_INIT_MPOOL | DB_INIT_TXN | DB_INIT_LOCK | DB_INIT_LOG | DB_SYSTEM_MEM;
status = handle->open( handle, DIRECTORY, flags, 0644 );
if( status != 0 )
exit( 1 );
// raise error
chdir( DIRECTORY );
for( int i=0; i < 0x1000; ++i )
system( "db_stat -e | grep process/thread | wc" );
return 0;
}

Hello,
I am still looking into this, but upon closer examination here is the situation, basically as reported.
The test calls set_thread_count which sizes the memory. In __env_attach(), (dbenv->thr_max is used to size the region. So you are correct, the higher the value used in set_thread_count, the larger the size of the region will be. Eventually that memory will be depleted, and __env_alloc_size() returns ENOMEM, after multiple calls to system(db_stat). __env_alloc_free() is not called. This is the part I am still investigating.
The test uses system to fork a separate processes for db_stat and the failing stack is:
lt-db_stat: assert failure: ../dist/../env/env_failchk.c/426: "ret == 0"
lt-db_stat: __os_stack+0x2b
lt-db_stat: __os_abort+0x1d
lt-db_stat: __db_assert+0x47
lt-db_stat: __env_set_state+0x53c
lt-db_stat: __env_attach_regions+0x38b
lt-db_stat: __env_open+0x154
lt-db_stat: __env_open_pp+0x334
lt-db_stat: lt-db_stat
So db_stat is opening an environment, attaching to its region, and then __env_set_state() calls __env_alloc(). It is __env_alloc() which fails with ENOMEM after some point when there is no more space to be allocated from the shared region. And I'm still looking into that space would be returned to the shared region.
Thanks,
Sandra

I just want to know if you could help me regarding my issue purchase Adobe Photoshop at Aps store unable to proceed the order due to forgot the answer for the 2 questions.

I just want to know if you could help me regarding my issue purchase Adobe Photoshop at Aps store unable to proceed the order due to forgot the answer for the 2 questions.
I dont know how to check my particulars during filling up my registration in apple store support.
Hope u could give us advice. Thanks...
CandidoSG
<Edited by Host>

Apple ID security issues -
Call Apple Care and ask for the Account Security Team. They can assist you with your issue.
http://support.apple.com/kb/HT5699

Db_checkpoint: Unable to allocate thread control block

Hello,
Every second day BDB 4.8 runs out of cache memory (size = 512MB).
We have 10 static worker processes (no segfaults) and one
db_checkpoint-process (checkpoints once a minute and exists).
We use only DB_WRITE_NOSYNC
After two days the db_checkpoint-process reports:
db_checkpoint: Unable to allocate thread control block
As soon as this error apears, I can neither checkpoint nor
db_recover.
Is there any chance (or a patch) to track down the memory leak?
Thanks

Hi Sandra,
It happened again one hour ago. I had hardly problems with BDB 4.6
Down below you will find a current "db_stat -e"
We have 10 workers with persistent db-connection and once a minute
a cronjob starts a checkpoint, then the cron-process exists.
Every second day (40 to 48 hours) the checkpoint-process can't connect
to the database and "db_checkpoint -1" says:
db_checkpoint: Unable to allocate thread control block
A normal "db_recover" would corrupt the database, I had to recover
catastrophic.
For sure the cache is not to small (512 MB, all database files: 1,3 GB)
Thanks
Markus
Mon Nov 30 17:32:44 2009 Local time
0x120897 Magic number
0 Panic value
4.8.24 Environment version
9 Btree version
9 Hash version
1 Lock version
15 Log version
4 Queue version
2 Sequence version
1 Txn version
Mon Nov 30 16:31:06 2009 Creation time
0x9d316701 Environment ID
2 Primary region allocation and reference count mutex [0/360 0% !Own]
11 References
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Thread tracking information
75 Thread blocks allocated
4096 Thread allocation threshold
521 Thread hash buckets
Thread status blocks:
process/thread 5055/3086948768: out
process/thread 5686/3086850464: out
[...snip...]
process/thread 6056/3086653856: out
process/thread 6087/3086649760: out
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
0x40988 Log magic number
15 Log version number
16MB Log record cache size
0 Log file mode
10Mb Current log file size
370618 Records entered into the log
370MB 354KB 853B Log bytes written
4MB 466KB 1001B Log bytes written since last checkpoint
17691 Total log file I/O writes
0 Total log file I/O writes due to overflow
198 Total log file flushes
665 Total log file I/O reads
1786 Current log file number
8303086 Current log file offset
1786 On-disk log file number
3630597 On-disk log file offset
1 Maximum commits in a log flush
1 Minimum commits in a log flush
17MB Log region size
9 The number of region locks that required waiting (0%)
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
5387 Last allocated locker ID
0x7fffffff Current maximum unused locker ID
9 Number of lock modes
131072 Maximum number of locks possible
131072 Maximum number of lockers possible
131072 Maximum number of lock objects possible
30 Number of lock object partitions
622 Number of current locks
797 Maximum number of locks at any one time
13 Maximum number of locks in any one bucket
0 Maximum number of locks stolen by for an empty partition
0 Maximum number of locks stolen for any one partition
632 Number of current lockers
708 Maximum number of lockers at any one time
69 Number of current lock objects
160 Maximum number of lock objects at any one time
2 Maximum number of lock objects in any one bucket
0 Maximum number of objects stolen by for an empty partition
0 Maximum number of objects stolen for any one partition
13M Total number of locks requested (13372706)
13M Total number of locks released (13372083)
0 Total number of locks upgraded
5313 Total number of locks downgraded
9 Lock requests not available due to conflicts, for which we waited
1 Lock requests not available due to conflicts, for which we did not wait
0 Number of deadlocks
60M Lock timeout value (60000000)
0 Number of locks that have timed out
60M Transaction timeout value (60000000)
0 Number of transactions that have timed out
66MB 904KB The size of the lock region
2141 The number of partition locks that required waiting (0%)
465 The maximum number of times any partition lock was waited for (0%)
0 The number of object queue operations that required waiting (0%)
3 The number of locker allocations that required waiting (0%)
0 The number of region locks that required waiting (0%)
2 Maximum hash bucket length
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
320MB 1KB 604B Total cache size
1 Number of caches
1 Maximum number of caches
320MB 8KB Pool individual cache size
0 Maximum memory-mapped file size
0 Maximum open file descriptors
0 Maximum sequential buffer writes
0 Sleep after writing maximum sequential buffers
0 Requested pages mapped into the process' address space
17M Requested pages found in the cache (99%)
71264 Requested pages not found in the cache
67 Pages created in the cache
71264 Pages read into the cache
17944 Pages written from the cache to the backing file
0 Clean pages forced from the cache
0 Dirty pages forced from the cache
0 Dirty pages written by trickle-sync thread
71298 Current total page count
71014 Current clean page count
284 Current dirty page count
32771 Number of hash buckets used for page location
4096 Assumed page size used
16M Total number of times hash chains searched for a page (16751183)
8 The longest hash chain searched for a page
39M Total number of hash chain entries checked for page (39437498)
0 The number of hash bucket locks that required waiting (0%)
0 The maximum number of times any hash bucket lock was waited for (0%)
7 The number of region locks that required waiting (0%)
0 The number of buffers frozen
0 The number of buffers thawed
0 The number of frozen buffers freed
71627 The number of page allocations
0 The number of hash buckets examined during allocations
0 The maximum number of hash buckets examined for an allocation
0 The number of pages examined during allocations
0 The max number of pages examined for an allocation
0 Threads waited on page I/O
0 The number of times a sync is interrupted
Pool File: article.db
4096 Page size
0 Requested pages mapped into the process' address space
1868517 Requested pages found in the cache (99%)
13311 Requested pages not found in the cache
0 Pages created in the cache
13311 Pages read into the cache
3428 Pages written from the cache to the backing file
[...snip...]
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
1786/3630541 File/offset for last checkpoint LSN
Mon Nov 30 17:32:01 2009 Checkpoint timestamp
0x8000675a Last transaction ID allocated
4096 Maximum number of active transactions configured
0 Active transactions
3 Maximum active transactions
26458 Number of transactions begun
0 Number of transactions aborted
26458 Number of transactions committed
0 Snapshot transactions
0 Maximum snapshot transactions
0 Number of transactions restored
1MB 192KB Transaction region size
0 The number of region locks that required waiting (0%)
Active transactions:
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
31MB 32KB Mutex region size
3 The number of region locks that required waiting (0%)
4 Mutex alignment
150 Mutex test-and-set spins
254163 Mutex total count
149165 Mutex free count
104998 Mutex in-use count
104998 Mutex maximum in-use count
Mutex counts
149165 Unallocated
1 env region
33 lock region
797 logical lock
1 log filename
1 log flush
1 log region
74 mpoolfile handle
71298 mpool buffer
17 mpool file bucket
32771 mpool hash bucket
1 mpool region
1 mutex region
1 transaction checkpoint
1 txn region

ORA-27044: unable to write the header block of file / IBM AIX RISC System/6

We are getting an error like this...
Oracle 11.2.0.2
AIX 5.3
Error:
CREATE CONTROLFILE REUSE DATABASE "CLMST" RESETLOGS NOARCHIVELOG
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-00200: control file could not be created
ORA-00202: control file: '/clmst02/UAT/oradata/control/control01.ctl'
ORA-27044: unable to write the header block of file
IBM AIX RISC System/6000 Error: 89: Invalid file system control data detected
Additional information: 3
Additional information: -1
Additional information: 1

ORA-09817 IBM AIX RISC System/6000 Error: 89
Oracle 11.2.0.2
AIX 5.3
Related Errors:-
Mon Nov 05 18:33:51 2012
ARC3 started with pid=30, OS id=954622
ARC1: Becoming the 'no FAL' ARCH
ARC1: Becoming the 'no SRL' ARCH
ARC2: Becoming the heartbeat ARCH
Errors in file /clmst01/UAT/oracode/app/oracle/diag/rdbms/clmst/clmst/trace/clmst_ora_2514960.trc (incident=17053):
ORA-00600: internal error code, arguments: [kccugg_end], [], [], [], [], [], [], [], [], [], [], []
Errors in file /clmst01/UAT/oracode/app/oracle/diag/rdbms/clmst/clmst/trace/clmst_m000_2105586.trc:
ORA-00313: open failed for members of log group 3 of thread 1
ORA-00312: online log 3 thread 1: '/clmst02/UAT/oradata/redo/redo03A.log'
ORA-27037: unable to obtain file status
IBM AIX RISC System/6000 Error: 2: No such file or directory
CREATE CONTROLFILE REUSE DATABASE "CLMST" RESETLOGS NOARCHIVELOG
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-00200: control file could not be created
ORA-00202: control file: '/clmst02/UAT/oradata/control/control01.ctl'
ORA-27044: unable to write the header block of file
IBM AIX RISC System/6000 Error: 89: Invalid file system control data detected
Additional information: 3
Additional information: -1
Additional information: 1
Cause:-
Your /clmst02/ mount point might be corrupted.
Check:-
fsck /clmst02
The current volume is: /dev/fslv00
File system is currently mounted.
Primary superblock is valid.
fsck: Performing read-only processing does not produce dependable results.
*** Phase 1 - Initial inode scan
*** Phase 2 - Process remaining directories
*** Phase 3 - Process remaining files
*** Phase 4 - Check inode allocation map
File system inode map is corrupt (NOT FIXED)
fsck: 0507-278 Cannot continue.
File system is currently mounted.
fsck: Performing read-only processing does not produce dependable results.
Fix:-
Either you can change the file location to another mount points or shutdown the database and run the fsck on /clmst02 mount point to fix the corrupted one & start the database.
Fix:-
Recreate the affected Redolog files
alter database add logfile group 3 (
'/clmst02/UAT/oradata/redo/redo03A.log',
'/clmst03/UAT/oradata2/redo/redo03B.log',
'/clmst04/UAT/oradata3/redo/redo03C.log') size 50m reuse;

HT201210 trying to update - get the message "the disc you are attempting to use is full" i am unable to proceed with update and have deleted files from my computer?

Tried to transfer a playlist - unable to do so - prompted to update my daughters ipod software - attempt to do so and receive message the disc you are attempting to use is full
Unable to proceed with update is this causing the issue with transferring the playlist?

You need to delete some files from your computer's c drive. Do not forget to empty the recycle bin.
It sounds like you clicked on update.

Unable to send message: 451 Blocked

I use Chaos Intellect mail client to access my Verizon and non-Verizon e-mail. I've had FiOS since Oct 2008. Recently, as in the past week, I get the following message when trying to send mail from my non-Verizon e-mail accounts, "There are communication errors, Unable to send message: 451 Blocked - see http://www.spamcop.net/bl.shtml?98.111.230.147" The mail, of course, doesn't get sent. I have no problem receiving any mail. I checked spamcop and my domains are not listed, and their mail settings are correct. I have to disconnect from FiOS and connect via my Verizon wireless broadband card. There is no problem sending from the Verizon account.
How can I correct this so I can send non-Verizon e-mail when connected to FiOS?
Thank you,

idburns wrote:
kpier,
You need to use Verizon's SMTP server for all outgoing mail, wether it's from a Verizon account or not. SMTP servers don't care what mail they send.
Obviously you need to keep using your non-Verizon mail's POP server to receive that mail.
Message Edited by idburns on 04-01-2009 09:17 AM
Some SMTP server will block mail as spam if the from does not match the where from. Like [email protected] from a SMTP server named verizon.net. Many do block mail like this, but some do not. If you need reliable mail then I would say not to do it. You can send it with the reply to set for the other pop server but it is still a pain. I like many don't think Verizon should be fighting spam from their outgoing server. If someone is spamming punish that account not all of them! If has not been an issue for me since I shutdown my remote mail account but there are services that offer alternate port SMTP with custom domain names.

Recently got the new IPad. Every time I try accessing the iTunes store, I get the error message, 'cannot connect to the iTunes store'. Am unable to proceed beyond this. Any suggestion?

Recently got the new IPad. Every time I try accessing the iTunes store, I get the error message, 'cannot connect to the iTunes store'. Am unable to proceed beyond this. Any suggestion?
I bought it in Thailand and am using it in Kenya.

I have the same issue. How did you solve it?

The list of blocked sites is empty.

Have used Firefox for years. There should be a healthy list of blocked sites (exceptions to cookies).
Privacy: always use private browsing mode - ticked
Accept cookies from sites - ticked
Accept third party cookies - always
Exceptions - shows as blank (no sites listed)
Cookies (only Google, coz I'm using it - I always clear out after session).
Reason for question: wanted to check that I hadn't got a site blocked, as this site repeatedly times out - I can't respond quickly enough to the ALLOW button when I get the "Firefox prevented ...." message.
Help!

Current Firefox versions do not show the Cookies in the Cookie Manager when you are in (permanent) Private Browsing mode.<br />
In Private Browsing mode all cookies are session cookies that expire at the end of the session (all PB mode windows closed) or when you exit Firefox.
In case you are using "Clear history when Firefox closes":
*do not clear the Site Preferences
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/Clear+Recent+History
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.

I HAVE BLOCK SITE AND i FOR GOT MY PASSWORD WHAT DO i DO?

i SET A PASSWORD FOR BLOCK SITE AND FOR GOT IT. WHERE CAN i CHANGE THAT?

If you lost your password: go to '''about:config''' (type '''about:config''' in the location bar and press enter) and reset the '''BlockSite.authenticate''' entry or clear the '''BlockSite.password''' entry.

Unable to download document from HTTPS site in ADF

Hi ADF Experts,
I have a critical issue in ADF application. While clicking on hyperlink for download a document ,i am getting following error:
"unable to download home from "<HTTPS SITE NAME>" The link is having HTTPS.
This problem is occurring in i.e 8, It's working fine in i.e 9.
Please suggest me with some solution.

hi mate,
have you tried uninstalling then reinstalling Nokia Browser from http://download.browser.ovi.com ? also try the same with Opera at http://m.opera.com Also check that you are fully up to date with your phone firmware by using Nokia Suite to check for any firmware updates.

Unable to connect to any secure sites with any browser

I am unable to connect to any secure sites. I downloaded Firefox with the hopes that it would fix the problem but it did not. What ever browser I use I cant connect to any secure sites. All of the other pages load correctly.
I have a PC notebook that I tried to load the same sites it worked fine, so I know that it is not a connecting problem.
emac Mac OS X (10.4.6)
ibook Mac OS X (10.2.x)

Are you connecting via dial up or high speed through a router? If that latter, check the firewall settings of the router. I have my router set to medium (high, medium, low, & none) and it works most of the time. But occationally I get to sites that won't load and setting the router (temporarily) to low usually allows me to access those sites. So perhaps this is your issue.
I think there are ways to add those sites to router security lists or "services" that will now let them through with the higher security settings, but I need it so rarely I haven't bothered to figure it out yet.
Patrick

I am unable to proceed to a blocked site.

Similar Messages

Maybe you are looking for