I am using FFnightly and all of a sudden I get the msg Error code: ssl_error_rx_record_too_long) only one one website which I need to access
The website can be accessed ok from another computer in the office. It happened about 3 days ago (I think after an auto update) and I hoped it would clear. I use win8.1. I tried one of the solutions and deleted Cert8db in the profile, but that did not help. I also re-set Nightly and it did not solve the problem.
Any help would be appreciated.
Check the connection settings.
*Tools > Options > Advanced > Network : Connection > Settings
*https://support.mozilla.org/kb/Options+window+-+Advanced+panel
If you do not need to use a proxy to connect to internet then try to select "No Proxy" if "Use the system proxy settings" or one of the others do not work properly.
See "Firefox connection settings":
*https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can
Which security software (firewall, anti-virus) do you have?
Some firewalls monitor (secure) connections and may be causing problems with secure connections.
Similar Messages
-
I use CS5 and all of a sudden I am getting a notification that says there is an error with my icons. It's telling me to contact support or reinstall. The problem is I don't know where my disks are to re-install. Any suggestions?
doodlebug,
Am I just out of luck until I find those?
You may try Adobe Support (phone),
http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html
and talk to them about your registration, but I am unsure whether they can help you with anything pre CC (There was a Customer Care option with chat which seems to have stopped working).
If you are still out of luck, please report back, and I will try to ask someone to find the right someone to help you. -
I have had my apple tv 2 for about 3 months which work perfectly fine when I use it with my iPad 3 ー all of the sudden I get the HDCP Error! I read the forms and done everything! Apple I name a loyal customer, please come out with an update soon!
That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it... -
I use iPhoto and want to know how to get the 'key photo' i select on my McBook Pro to be the same one that gets used on my iPhone 5s when i sync. i also want the events to appear on the iPhone in the same order i have them on my macbook. any ideas there too?
Killerfinch wrote:
My new yahoo account nestles comfortably in iCloud on the mine iPad.
No, your Yahoo account is not in iCloud (which only handles iCloud mail), it is in Yahoo, and the Yahoo mail account is on your iPad.
But the MacBook Pro will have none of it! I write this question now as I fear that I will be totally demented very soon and unable to formulate my thoughts clearly!
Get the correct settings for your account from Yahoo and set it up manually.
By the way, I also find the "password" issue problematical. It seems Apple want my Apple password rather than my eMail password. All very confusing.
That would depend on what you are trying to do. -
Hi,
I have an iphone 4 and all of a sudden none of the apps will work, except the ones that came with the phone. When I open them the screen goes black then it goes back to the homescreen.
Also when I plug the phone into itunes it only gives me the option to either restore or eject the phone. Up until today I never had any problems, I sync it regularly and all the software (inc itunes) is up to date. The last time I backed it up was about a month ago when I got the phone, (a replacement as my other iphone4 had loads of problems) so I don't want to have to restore it and lose everything off it!
Any ideas? Thanks in advance!Sounds like the device was dropped at some point and damaged as a result.
Take it to Apple for evaluation and a replacement. -
I have recently restored everything on my iMac after getting a new hard drive. When i try to use Elements, i get the following error code ERROR 150:30. Any ideas?
Did you use migration assistant to copy over programs, documents, and settings? You can't do that with PSE. Elements is not a tidy package in accordance with the apple developer guidelines. The installer strews stuff all of your hard drive in place the migration assistant isn't programmed to look and you can never hope to find all h the bits. You must always install PSE from scratch on a new machine. By attempting to copy it you have made a lot of trouble for yourself.
You will need to download and run this:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
and then you can go around and manually remove what you can reach. Look in applications, your hard drive>library>application support>adobe, your username>library>preferences. In the user library also delete any saved application states for PSE.
Then you can reinstall from scratch. -
after unlocking over the phone from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this .
Itunes displays a message saying "there is no SIM installed in the phone you're trying to activate" even if there is the same SIM that was working minutes before.
The SIM works on a different phone I tested it.
Any ideas?? TKS Sandro“Could Not Activate EDGE” error message Update ...
Well it’s going on day 6 and still sporadic to no EDGE on my iPhone. At one time, it was thought to be a defective iPhone – since my partner’s iPhone works just fine.
After over three hours on the land line with AT&T and Apple, I was sent to the local Apple store for a replacement. Of course, as soon as I walked into the Apple store my iPhone worked just fine. ;-( The local store replaced my iPhone and suggested I go home and activate the phone as a NEW iPhone, that way if there was a bug in my data it would not carry over to the new phone. Did that and well… still sporadic to no EDGE. By the way, I have the Big White “E” to the right of the 5 bars and AT&T .
AT&T said last week they has “Software” issues in my area, but the CSR I talked to did not know what the issues were or if they were the cause of my problems. He did say they would call me back today to see how my iPhone was doing, but alas, no call back.
When I’m next to my partner, trying to access the same feature, his iPhone is just so fast. Mine hangs up, draws out and finally I get the error message, “Could Not Activate EDGE”. I am updated to version “1.1.4(4A102)”. New (refurbished) iPhone direct from Apple.
I remember reading a while back about some problems others had when they upgraded to from 1.1.3 to 1.1.4. I never had those problems, but it sure looks like they may have started. Does anyone remember what the problems with 1.1.4 were, what was done if anything to correct them, and best of all any suggestions?
By the way, this is Seattle, not some small – out of the way place where connection and signal strength is expected to be second rate. Also, I had full function of my iPhone from the day I bought it in June 2007, all the way up to Thursday March 20, at 2120.
Thanks
Joe -
I just tried updating my iPhone 4 to ios 6. It told me that I need to store my phone and update it but every time I try to update it, I get the -1 error message...can someone help me out?
Sorry, wish I could help but I have the same problem.
Been trying for hours to update a 4s and the furthest I get is the "-1" error.
So frustrating, I guess a visit to Apple is forthcoming.
Been using the iPhone since the first model and never a problem till now.
John -
When I try to open FF4 I get the message it can't be opened because it is not supported on my architecture. I can't believe no-one else has had this problem. You must have a lot of internet duffers who don't really know what they're doing. I need to get my old version of FF back if I'm going to run it on my computer. I don't understand why an app as widely used as this doesn't have a pre-app that assesses whether one has the architecture to run a new version. You advertisement merely said OS 10, and "all systems". It did not specify a newer MacOS than my 10.4.11. Now I seem to be out of luck and will just use Safari.
Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html -
I have several VIs that use the same typedef. This "super" typedef consists of of a cluster containing 6 arrays. Each array has elements that are themselves typedefs. The array element typedefs consist of a cluster of strings, a string array, and yet another cluster typedef of instrument handles. The total number of unique typedefs is 13 (1 super, 1 as the array element in the 6 arrays, and 1 in each array element).
When I make any changes to any of these typedefs and I try to open a VI that uses the "super" typedef, LabVIEW stops loading subVIs and crashes with the Application Error: Application Error: The inst
ruction at "0x004be060" referenced memory at "0x00000001". The memory could not be "read". Also note that this VI contains several subVIs that use this "super" typedef for terminal inputs and outputs.
What is causing this problem? My only solution to this is to rename the "super" typedef, open the VI, ignoring the load of the "super" typedef, and once the VI opens (with a broken arrow) relinking the VI to the typdef after renaming the typedef back to the original name. This becomes quite painful when you have to do this for each and every VI that uses this typedef on every revision of the typedef.You might want to first install the 6.0.2 patch before digging too far into this. You can download it from the ftp site:
ftp://ftp.ni.com/support/labview/windows/updates/6.0.2/
If the problem remains, then it is likely related to a few known issues with strict type defs. Unfortunately, there is not much that can be done about it at the present time. You might try having the *.ctl file open in the editor when you open the VIs to see if that helps. -
I recently restored to factory settings.I updated iTunes Store account details and change of password on my PC. After that I tried to log on to the Store via my mobile and was confronted with my previous ISP,s log on page requesting password which when entered correctly it didn't recognise. The restoration action solved that particular problem but has now left me with the "error code 4001 problem. Be grateful for solution..
means that apple mobile device service needs to be started try this article to get it turned back on
Restart apple mobile device service -
hello what ever i want to do in itunes player it want me to authorize my notebook and when i do it , it says your notebook has been authoriz but i get the same error
Hi arya,
Follow the troubleshooting instructions in this Support Article:
http://support.apple.com/kb/TS1389
Cheers,
GB -
my ipod wont update because it gives me a (-1) error code and i really need to update it and suggestions? ive read the troubleshoot page on it and it said something about uninstalling the security software and i have no idea how to do that.....
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
The "device may need service" means a hardware problem. in that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
When I try to download the new update iOS7 when I get to like 20 something minutes it stops and reads and error occurred and quits downloading. I have tried at least 5 times. I have plugged it in to the charger to keep the battery from dying but still the same error. Please help.
This can happen if the server is really busy, I had to retry 4-5 times until it finally worked. Just keep at it, you'll get there in the end, but yeah, it would be good to know what the error actually says
-
My years remains constant in some of the application. I tryed to change it by going through Time a nd date in Syatem prefernces but it does not change while Day and month change. How to correct it.
Date/ Time Incorrect in Applications
Maybe you are looking for
-
My wife & I are looking to upgrade from our old TV Curtis Mathis, (yes - they almost last forever, lol) and where we live there is only antenna access and we utilize a coaxial cable into our TV input. That being said,of the following Samsung models
-
When I render and Export there are these little lines around moving objects
When I render and Export there are these little lines around moving objects, what are they and how do I fix it?
-
Dear friends, is there any way tht i can pass the session variables set in a jsp file to a php file. Is there any way to do this apart from setting cookies? plz help!! bussa
-
Getting Flash CS5 to publish an AIR 1.5 file
*** For the record, I just want to say that I think it is totally absurd that Adobe shipped Flash CS5 with the ability to ONLY publish AIR 2.0 apps...which hasn't been publicly released yet. I've been working on an AIR app for several weeks and neede
-
Mac OSX cannot be upgraded to v.10.5 on your computer
I have a Macbook Pro that is 3 months old running 10.4.11. I am trying to upgrade to leopard and repeatedly get the error: Mac OSX cannot be upgraded to v.10.5 on your computer. / Mac OSX v.10.4 or later could not be found on your computer. Then when