Using LabVIEW 6.0.1 in Win2K, I get the Application Error: The instruction at "0x004be060" referenced memory at "0x00000001". The memory could not be "read".

I have several VIs that use the same typedef. This "super" typedef consists of of a cluster containing 6 arrays. Each array has elements that are themselves typedefs. The array element typedefs consist of a cluster of strings, a string array, and yet another cluster typedef of instrument handles. The total number of unique typedefs is 13 (1 super, 1 as the array element in the 6 arrays, and 1 in each array element).
When I make any changes to any of these typedefs and I try to open a VI that uses the "super" typedef, LabVIEW stops loading subVIs and crashes with the Application Error: Application Error: The inst
ruction at "0x004be060" referenced memory at "0x00000001". The memory could not be "read". Also note that this VI contains several subVIs that use this "super" typedef for terminal inputs and outputs.
What is causing this problem? My only solution to this is to rename the "super" typedef, open the VI, ignoring the load of the "super" typedef, and once the VI opens (with a broken arrow) relinking the VI to the typdef after renaming the typedef back to the original name. This becomes quite painful when you have to do this for each and every VI that uses this typedef on every revision of the typedef.

You might want to first install the 6.0.2 patch before digging too far into this. You can download it from the ftp site:
ftp://ftp.ni.com/support/labview/windows/updates/6.0.2/
If the problem remains, then it is likely related to a few known issues with strict type defs. Unfortunately, there is not much that can be done about it at the present time. You might try having the *.ctl file open in the editor when you open the VIs to see if that helps.

Similar Messages

My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any

My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any advice is helpful. This has never happened in 6 years

answered in your other thread LR 4 suddenly no longer recognizes files.

I tunes: when trying to burn a playlist I keep getting the message: the attempt to burn a disc failed. The disc could not be read from or written to. I am using version 12

I tunes: I am using version 12 of I tunes. Ever since downloading it I get the message when trying to burn a playlist it says, The attempt to burn a disc failed. The disc could not be read from or written to.
I uninstalled V-12 and then reinstalled it. This enabled me to burn a disc again but after a couple of tries I received the same error message again. Has Apple put out a fix to this problem that anyone is aware of?
Thanks.

Hi rossfrombluffton,
Welcome to the Support Communities! The resource below provides some general things to consider when burning a disc with iTunes. I would also try burning a music CD and a data disc from a different application in the Windows OS and trying a different brand CD just to confirm the issue is not with the optical drive.
Can't burn a CD in iTunes for Windows - Apple Support
http://support.apple.com/en-ae/HT203173
Find out what to do if you can't burn an audio CD using iTunes for Windows. Sometimes an audio disc may not burn as expected. Here are some things to check.
Update iTunes
Download and install the latest version of iTunes for Windows.Check for unauthorized songs
iTunes will stop burning a disc if you purchased one or more of the songs in a playlist from the iTunes Store and the songs aren't authorized to play on your computer. This message should appear: "Some of the files can not be burned to an audio CD. Do you still want to burn the remainder of this playlist? For more information on why some files can not be burned, click below."
To find out which songs aren't authorized, play each song in the playlist. Songs that play are authorized. Songs that don't play aren't authorized. You'll be asked to authorize any unauthorized songs.Make sure your playlist will fit on a single CD
If there are too many songs in a playlist to fit on a single CD, iTunes should ask if you want to burn multiple discs or cancel the burn. This message should appear: "The songs in this playlist will not fit on one Audio CD. Do you want to create multiple Audio CDs with this playlist split across them? This will require more than one blank CD to complete."
If you click the Audio CDs button, the burn will continue and you'll be asked to insert blank CDs until the playlist is completely burned. If you click cancel, the burn will be canceled.
To make the playlist shorter so that it will fit on a single CD, select a song to remove from the playlist and choose Edit > Clear. Repeat this step until the duration of the playlist is between 60 and 80 minutes. The duration appears at the top of the playlist window. Most CD-R discs can hold 60 to 80 minutes of music.
Check how many times you've burned the playlist
An unchanged playlist that contains songs purchased from the iTunes Store can be burned no more than seven times.Additional steps and submitting feedback
Go to iTunes Support to get additional troubleshooting suggestions specific to your optical drive configuration or to submit feedback to Apple.Learn more
For additional troubleshooting, please see these steps:
Additional troubleshooting tips for burning issues
iTunes for Windows doesn't recognize my audio CDs
Last Modified: Feb 3, 2015
Have a good day ...
- Judy

HT5429 I am not able to get any directions on my maps i am using iphone 4s and updated to ios 6.1.3 and whenever i try to find a route it always says directions could not be found can anyone help in fixing it

I am not able to get any directions on my maps i am using iphone 4s and updated to ios 6.1.3 and whenever i try to find a route it always says directions could not be found can anyone help in fixing it

Maps: Turn-by-Turn Navigation
Argentina Australia Austria Belgium Brunei Bulgaria Canada Croatia Czech Republic Denmark Egypt Estonia Finland France Germany Greece Hong Kong Hungary Ireland Israel Italy Japan Latvia Liechtenstein Lithuania Luxembourg Macau Malaysia Malta Mexico Morocco Netherlands New Zealand Norway Poland Portugal Romania Russia San Marino Singapore Slovakia Slovenia South Africa South Korea Spain Sweden Switzerland Taiwan Thailand Turkey UK Ukraine USA
Back to Top

Since I downloaded Adobe Reader 11.0.07 I have been totally unable to print any PDF files using my Dell 1720 laser printer - I just get a blinking "error" light on the printer, no other error messages . I never had a problem printing PDF files before down

Since I downloaded Adobe Reader 11.0.07 I have been totally unable to print any PDF files using my Dell 1720 laser printer - I just get a blinking "error" light on the printer, no other error messages . I never had a problem printing PDF files before downloading the new Reader version. Suggestions? Thank you.

Hi,
Which version of Adobe Reader were you using earlier when printing using Dell printed was working fine?
Thanks,
Shakti K

How to resolve "You don't have permission to use the application" errors?

We've been struggling with managed preferences, specifically applications, for a few users. They have mobile home folders which live on a Mac OS X 10.6.x Snow Leopard Server AFP server, preferences which are managed (by group) on a Mac OS X 10.6.5 Snow Leopard Server Open Directory Master, and the clients are running Mac OS X 10.6.4 Snow Leopard (bound to the Open Directory Master). There are also two Mac OS X 10.6.4 Snow Leopard Server Open Directory Replicas. We always manage applications and DO NOT sign the apps when adding them in Workgroup Manager.
Essentially, key applications are unable to run due to the "You don't have permission to use the application" errors, even though they're explicitly whitelisted. (See some prior investigation over on Serverfault.) After seeing that the Mac OS X 10.6.5 Server update included the following fixes, we upgraded our Open Directory Master to 10.6.5:
* Addresses an issue that could prevent managed preferences from being applied when a user logs in on a workstation that has been idle.
* Fixes an issue that could prevent administrators from bypassing client management settings on a workstation.
This seemed to improve the situation slightly, our most important application now seems to be allowed. Occasionally, it'll give the same error, but a simple log out & back in allows it again. We have not upgraded the client workstations with the Mac OS X 10.6.5 update as it doesn't note any related fixes and we haven't fully qualified it for mass deployment.
We now have two applications that live in ~/Applications which are explicitly whitelisted (again, NOT signed), which fail with the same error, but logging out & back in does not resolve it. `sudo mcxrefresh -n 'user'` doesn't resolve the issue. In fact, `sudo /System/Library/CoreServices/ManagedClient.app/Contents/MacOS/ManagedClient -f -u `id -u 'username'`` fails with the following error:
ManagedClient- bad parameter to -u option: use format '-u 501'
Today I was able to catch the following in /var/log/system.log while attempting to run one said applications:
Dec 22 17:36:24 hostname parentalcontrolsd[43221]: -[ActivityTracker checkApp:csFlags:] [954:user] -- * Incoming app appears to be masquerading as white listed app and failed signature validation: /Users/user/Applications/FileMaker Pro 5.5/FileMaker Pro.app/Contents/MacOS/FileMaker Pro. Note: This may be a valid app of a different version than what was whitelisted (on a different volume?)
Dec 22 17:36:24 hostname [0x0-0xa42a42].com.filemaker.filemakerpro[43304]: launch of /Users/user/Applications/FileMaker Pro 5.5/FileMaker Pro.app/Contents/MacOS/FileMaker Pro was blocked
Dec 22 17:36:24 hostname com.apple.launchd.peruser.1340[6375] ([0x0-0xa42a42].com.filemaker.filemakerpro[43304]): Exited with exit code: 255
Dec 22 17:36:24 hostname parentalcontrolsd[43221]: -[ActivityTracker(Private) _removeAppFromWhiteList:] [1362:user] -- * Couldn't find local user record
So, even though the apps are listed in Workgroup Manager and are unsigned, and also appear in '/Library/Managed Preferences/user/com.apple.applicationaccess.new.plist', it appears that the client somehow thinks they don't match what's in the whitelist even thought WE DON'T SIGN THEM WHEN WE ADD THEM!
What might be causing this? Any further troubleshooting tips would be GREATLY appreciated!

According to the [Code Signing Guide|http://developer.apple.com/library/mac/#documentation/Security/Conceptual /CodeSigningGuide/Procedures/Procedures.html#//apple_ref/doc/uid/TP40005929-CH4- SW2], it appears that there is no way to remove signing (emphasis mine):
"You can take a partial-update approach to revising your code on the user’s system. To do so, sign the new version as usual, then calculate the differences between the new and the old signed versions, and transmit the differences. Because the differences include the new signature data, the result of installing the changes on the end-user's system will be the newly signed version. You cannot patch a signed application in the field. If you do so, the system will notice that the application has changed and will invalidate the signature, +and there is no way to re-validate or resign the application in the field.+"
Upon further investigation, the version of FileMaker 5.5 in question appears to be signed even after a fresh install from original install media. I wouldn't have thought Code Signing was around back then (2001). And the code signing appears to match between the fresh install (to a new location) and the original install. I'll attempt to sign it in WGM and install the same, signed copy everywhere.
Also, I looked at one of our other working primary applications (4D.app) and it is unsigned, but appears in the Firewall as "Allow incoming connections", so I don't believe that the Application Firewall is necessarily signing apps automatically (but I certainly won't be ruling it out).
I haven't checked yet, but the other application that's failing is "Parallels Desktop 6", which I'd bet is signed. I wonder if the "Automatically allow signed software to receive incoming connections", which is checked, would come into play at all?
Thanks for pointing out how to use `codesign` to check whether an application is signed or not, this seems to be the first real break on this case.

Purchased a new Macbook Pro 13". I used migration assistant to transfer. I can't backup to time capsule. I am getting on error The backup disk image "/Volumes/Herb's Time Capsul/Herb MacBook Pro.sparsebundle" could not be created (error 17). Help

Purchased a new Macbook Pro 13". I used migration assistant to transfer. I can't backup to time capsule. I am getting on error "The backup disk image “/Volumes/Herb's Time Capsul/Herb MacBook Pro.sparsebundle” could not be created (error 17). Help!

Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the page that opens.
Select the System keychain in the list of keychains in the sidebar of the window. If you don't see the list, click the down-arrow icon below the sidebar.
Then select Passwords in the Category list at lower left. Click the Kind heading in the list of keychain items to arrange it by Kind.
Locate the AirPort Disk Password with the name of your Time Capsule. Double-click the item and check the box marked Show Password in the inspector window that opens. You'll be prompted for the administrator login password. Make a note of the AirPort password, then close the inspector window and delete the item.
Also delete any other AirPort DIsk Password items for that same Time Capsule, which may have had a different name in the past.
Quit Keychain Access and try again to back up.

Recently in the Bahamas where I helped a friend with his new iPad. We could not find Bahamas in initial setup so we used United States and could not enter Visa/MC billing address in Bahamas. iTunes rejected, billing info is not what's on file. What to do?

Recently in the Bahamas where I helped a friend with his new iPad. We could not find Bahamas in initial setup so we used United States and could not enter Visa/MC billing address in Bahamas. iTunes rejected, billing info is not what's on file. What to do?

Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app. I am certain other applications also need this information. Although lengthy, I could not find a more comprehensive place to retrieve this information. Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Why do I get "The exception Privileged instruction (0xc0000096) occured in the application" error message when exiting LabVIEW 6.1?

I have created a vi that uses the LV-GPIB and database connectivity vis. The program runs fine and it ends execution by running the "Close Database Connection.vi".
After closing out my front panel windows and exiting LabVIEW 6.1, I get an error dialog box that reads the message "The exception Privileged instruction (0xc0000096) occured in the application". What does this error mean and how do I resolve it?
Thanks,
Taf

Hi Taf,
Given the broad scope of your application, it may be best to try and isolate the problem down by taking out parts of your application and simplifying it down as much as possible until you can get a consistent version that throws this exception. I would first try to take out either the GPIB or database connectivity portions of the application to narrow down our problem. This error generally occurs when accessing DLLs and external applications, so I wouldn't be surprised if it's the GPIB or database. Let's try to see exactly which one it is and then we can dig deeper into that part of the code. Thanks for your cooperation!
Jeremy L.
National Instruments
Jeremy L.
National Instruments

LabVIEW 7.1 reports an application error 'instruction adresses memory at 0x00000000 - ... could not be written' when finishing LabVIEW, even when not running any private code

Hi there,
I have found similar Qs here, but this one is _somehow_ different.
My quite large app (>600 VIs) uses some DLL calls to communicate with medical devices. It runs OK, AFAIK, even when started several times. BUT I get an error message each time I when finishing LabVIEW 7.1 (even when just having loaded the app!!!). The error message states that "The instruction at 0x778cca36 adresses memory at 0x00000000. The process 'written' could not be done on that memory. Click to close the app".
Any clues?
My system: Athlon64 3000+ with 1GB of RAM running W2k German with all availabel SPs, LabVIEW 7.1 English with all support files from the devellopr suite May05 edition. System was set up 2 days ago on a fresh PC. The old system showed the very same behavior.
My opinion is, that simply loading an app and than removing it should not cause such an error??!!
Greetings from Germany!
Uwe
Attachments:
Application_Error_LabVIEW_when_finishing.jpg ‏20 KB

I can't look at your code because I don't have LV 7.1, but I would recommend searching on the side of the DLL.
Do you have the source for the DLL? Can you be sure that the DLL doesn't somehow have a memory addressing bug? The DLL will be loadsd as soon as the program is loaded AFAIK, so maybe when unloading the DLL an error occurs because something isn't initialised properly. I've never programmed a DLL, so I may be way wrong, but my instinct tells me that the problem will most likely be with the DLL.
Hope this helps
Shane.
Using LV 6.1 and 8.2.1 on W2k (SP4) and WXP (SP2)

I am using Windows XP SP3, I have problem with file download while resuming downlod giving error "file...could not be saved, because the source file could not be read." Please help me

I am using Fire Fox 5 beta version. After pausing the long file download, when I press the Resume download button the above message appear each time asking "Contact to Administrator". This problem was not with Fire Fox version 3 and above. Please Help Immediately. Thanks in advance...

It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
* http://kb.mozillazine.org/Unable_to_save_or_download_files

CVS NI1454 Labview RT 8.2, NI-VISA probleme : "NI-VISA loads modules... At Least one passport on your system could not be loaded"

Bonjour,
Je cale sur un problème avec le système de vision NI-CVS 1454.
J'ai installé la version Labview 8.2 RT dessus car je n'avais les licences que pour cette version.
Dans mon programme, la caméra doit réagir sur des signaux digitaux pour effectuer une analyse 1 ou une autre (analyse 2).
Comme il me fallait connecter des I/O j'ai utilisé les fonction de NI-Imaq I/O > Open I/O.
La caméra ne sait rien faire avec cela car je dois installer des softwares sur le système.
J'ai donc été via Ni-MAX installer le soft NI-RIO FCF et cela demande automatiquement pour installer NI-VISA et NI-VISA SERVER
Mais lorsque cela est fait j'ai un message à chaque démarrage du CVS :
"NI-VISA loads modules(Passports) ro access GPIB, Serial, VXI, etc.... At Least one passport on your system could not be loaded. You should run the Measurement & Automation Explorer"
Je ne fais que cela depuis 2 h mais je ne trouve pas le problème..
est-ce la compatibilité des versions? Dois-je travailler autrement pour les I/O surle CVS?
Merci pour votre aide.
Seb

Bonjour,
Avez-vous essayé les tests proposés par Sami Fatallah ci-dessus ? Si oui quels en sont les résultats ?
En effet je pense qu'une réinstallation du CVS (en safe mode) serait judicieuse.
En ce qui concerne la configuration logiciel, tout semble correct.Vous n'avez donc en effet pas besoin du lien que je vous ai envoyé dans mon précédent message. Toutefois une réparation comme suggérée ci-dessus pourrait-être utile.
Pour ce qui est du fonctionnement de IMAQ I/O, il vous permet d'accéder aux entrées/sorties via le FPGA. Cependant cela est transparent pour vous car un bitfile est généré à l'installation. Vous n'avez donc pas besoin de LabVIEW FPGA ni de programmer le FPGA. Plus de détails ci-dessous :
http://digital.ni.com/public.nsf/allkb/98EE3EF87B2058F2862575BC005EDBC6
Quel type de caméra connectez-vous à votre CVS par ailleurs ?
http://forums.ni.com/t5/Machine-Vision/CVS-1456-Connection-Problems-VISA-error/m-p/1041051?requireLo...
Voici un lien utile pour le diagnostic et la résolution de problèmes sur les CVS en général. Il ne vous sera d'aucun utilité dans le cas précis, cependant je vous conseille de l'ajouter à vos favoris.
http://digital.ni.com/public.nsf/allkb/35D5C8DB4F1A66F5862571EA005D2FE3
N'hésitez pas à nous tenir informés de l'évolution de la situation.
Bien cordialement,
Yannick D.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> Du 30 juin au 25 août, embarquez pour 2 mois de vidéo-t'chat ! Prenez place pour un voyage au coe...

HT1096 I have a analog to DV converter that I have had for years, but I have not used it for awhile am using a newer MAC. How do I get it to import from my converter. It is only showing the built in camera.

I have a analog to DV converter that I have had for years, but I have not used it for awhile, and I am using a newer MAC. How do I get it to import from my converter. When I go to import in iMovie it is only showing the built in camera. Help...

Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

'Renew your subscription' appears when using my CS6 program. How do I get my applications to work?

I canceled my Creative Cloud subscription last year when I chose to purchase a copy of CS6. CS6 worked fine until I went to open up InDesign and a pop-up appeared saying 'Renew your subscription'. I do not wish to renew my Creative Cloud license, and I just want to use my CS6. Any help on how I can get my applications to work? I'm on a Mac, if that helps. Thank-you!

http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
Mylenium

Is there any problems using LabView 5.1.1 on Win2K?

I am currently upgrading the company's system from Win NT 4.0 to Win2K and I am wondering if there is any problems in upgrading LabView to Windows 2000?

No infact i'm running LV5.1.1 and LabVIEW 6.0.2 on the Win2k system.
A Rafiq
National Instruments
http://www.ni.com/support

Using LabVIEW 6.0.1 in Win2K, I get the Application Error: The instruction at "0x004be060" referenced memory at "0x00000001". The memory could not be "read".

Similar Messages

Maybe you are looking for