SAP Sol Mgr 4.0 Upgrade to 7.0 Enterprise Edition

Hi,
I have installed SAP Sol Mgr 4.0 SR3. Now I want to upgrade to SOl Mgr 7.0 Enterprise Edition.
What are the steps I need to follow.
Regards,
B

Hi Neshimi,
Thanks for your reply. Points assigned.
I actually installed Sol Mgr 4.0 SR3. In your reply you mentioned it same as Sol Mgr 7.0 SR3.
Is the Sol Mgr 7.0 EHP1 same as Sol Mgr Enterprise Edition?
Please let me know the steps I need to follow to upgrade to Enterprise Edition. I understood your reply partly.
Please be more clear so that I can understand easily.
What are the patches or updates I need to download. How to Upgrade after I download the files.
The reason why I installed Sol Mgr 4.0 SR3 first is I have the license for it. Is the upgrade free for the next version?
Regards,
B
You can also install ETP as a add-on
check #1109650 and:
#1140258:
2. Prerequisites for the installation
You require SAP Solution Manager 7. 0 SP15 to SPS 17. With SPS 18 (identical to EHP 1) it is automatically activated. The steps described further down are not required.
3. Preparing for the installation
4. Executing the installation
Download the SAP Solution Manager Extension Add-on ST-ETP from SAP Service Marketplace. For details see note 1109650.
Install the Add-on in your Solution Manager
5. After the installation
To activate SAP Solution Manager Enterprise Edition, the Enterprise Addon SM_APPLM has to be activated in the IMG of the Solution Manager System. This is done via IMG activity SAP Solution Manager->Configuration->Scenario-Specific Settings->Activate Solution Manager Enhancements.
a) In the case of ST-400 SP15-SP17
To use Extended Tracebility in Change Request Management activate BC-Set SOLMAN40_CHARM_CONTEXT_001 in transaction SCPR20
b) In the case of ST-400 SP18 or higher
The activation of BC-Set SOLMAN40_CHARM_CONTEXT_001 will be done automatically.
Please also note that your Solman 4.0 SR3 is similar to SolMan 7.0 SR3. The name has just changed in order to matchup with the Netweaver naming convention
Nesimi

Similar Messages

I am using IMAQ vision for Measurement Studio, Ver6.0 with Measurement Studio Base Package,Ver6.0(Professional Edition).Can I work in IMAQ Vision for Measurement studio, Ver6.0 If I upgrade Measurement studio to Enterprise Edition,ver8.0.1

I am using IMAQ vision for Measurement Studio, Ver6.0 with Measurement Studio Base Package,Ver6.0(Professional Edition).Can I work in IMAQ Vision for Measurement studio, Ver6.0 If I upgrade Measurement studio to Enterprise Edition,ver8.0.1
Thanks
Biswajit

Howdy Biswajit,
The IMAQ and Vision ActiveX controls you are using with Visual Basic 6 do not install with Measurement Studio. They are installed when you install the IMAQ software and include support for Visual Studio 6. Upgrading to Measurement Studio 8.0.1 will have no effect on your IMAQ controls since they are not related to one another. Purchasing Measurement Studio Professional or Enterprise packages allows you Visual Studio 6 support for other ActiveX components. Refer to this link for a list of ActiveX components included in those packages.
If you are asking about using the ActiveX controls in .NET, then take a look at this KnowledgeBase entitled Do NI-IMAQ and NI Vision Support Microsoft Visual Studio .NET?
Hope this clarifies things!
Best Regards,
Jonathan N.
National Instruments

Search Service Application problems after upgrading from Foundation to Enterprise edition of SharePoint 2013

Hi all. I have been searching for days for a solution to a problem I am having with SP2013 Enterprise edition.
We recently upgraded from SP2013 Foundation to SP2013 Enterprise. After the upgrade, the search services are no longer working and we are receiving many application log entries indicating the following:
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (ea2019ef-bb9e-4efe-85ee-5d2307406f31).
Reason: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
Technical Support Details:
System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
as well as:
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (ea2019ef-bb9e-4efe-85ee-5d2307406f31).
Reason: The object you are trying to create already exists. Try again using a different name.
Technical Support Details:
System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
I have tried to remove the search service application and recreate it, and even though the SharePoint Central Administration states that it was created successfully, I am still getting the same errors in the log. If I go to the Search Service Application
Search Administration page, the "System Status" shows the following message:
The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component '0359af35-0982-4ede-8838-b1d390e915bf' in search application 'Search Service Application' is in a good state and
try again
Additionally, under the "Search Application Topology" section, it states "Unable to retrieve topology component health states. This may be because the admin component is not up and running" which I assume is normal if the admin is not
running.
Does anyone know how I can resolve this problem?
Thanks!

Hi Joaquin,
According to your description, the error occurred when you re-created the Search Service Application.
Based on the error message, I recommend to verify the things below:
   1. Check if the association between the Search Service Application proxy and the web application is configured.
Please go to Central Administration > Application Management > Configured service application associations > Click Default to see if the Search Service application is checked.
   2. Change the app pool for the Search Service Application to SharePoint Web Services Default in the properties of the Search Service Application.
Please go to Central Administration > Application Management > Manage service applications > Highlight the Search Service Application > Click Properties in the ribbon > Change
the two app pool to SharePoint Web Services Default: App Pool For Search Admin Web Service and Application Pool for Search Query and Site Settings Web Service.
    3. Run PS command to check if the search admin timer job is enabled: Get-SPTimerJob
job-application-server-admin-service | fl. If it is not enabled, use PS command to enabled it and then reset Internet Information Services: Enable-SPTimerJob job-application-server-admin-service.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Upgradation from 10g R2 Enterprise Edition to 11g R2 Standard Edition

Hi All,
I am going through a challange, and have some doubts on it, please have a look on it.
My DB Details are as follows.
Queried from TOAD:
Production Server Details:
SELECT * FROM V$VERSION
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Prod
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for 32-bit Windows: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
Development Server Details:
SELECT * FROM V$VERSION
BANNER
Oracle Database 10g Release 10.2.0.1.0 - Production
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
Production server is in Enterprise Edition and Development is in Standard edition. Now my organization expecting to upgrade Oracle to next Database Version i.e., 11g R2 Standard Edition in both Production & Development, cause they are using only a single application in Oracle DB.
For production, current DB is Enterprise Edition & Upgrading version is of Standard Edition. What are the consequences am I going to face while upgrading the version and edition from 10g R2 EE to 11g R2 SE.
What are the patches I need to apply for it, or need I to do new Installation and dump data using Import & Export at user level. My DB Data is mostly around 2 - 3Gigs.
Kindly let me know which is easy way and which is standard practice advised by Oracle.
Thanks in Advance.
Mohd Sirajoddin

Enterprise edition has lot of features than standard edition and hence we can not migrate from enterprise edition to standard edition,.
The only possibility is Export/Import or Expdp/Impdp
It is also discussed at
oracle downgrade from enterprise edition to standard edition

Upgrade from Professional- to Enterprise Edition

Hi,
We would like to upgrade our DPS professional edition to an Enterprise edition. I can't find any information on the adobe website and the customer service gave me the advice to visit this forum. Does someone knows how to arrange this upgrade???
Thanks!

Go to http://www.adobe.com/products/digital-publishing-suite-enterprise.html and click on "BUY" in the tab bar across the top. That will take you to a form where you can fill in your information to have an Adobe representative contact you.
Neil

SAP on Windows 2008 R2 Standard to Enterprise Edition

Hello!
We are using SAP NetWeaver System running on Windows 2008 R2 Standard Edition (VM Ware).
We are planning to extend RAM size of this server up to 50GB.
Is there any possibilites for an Inplace Upgrade from Standard to Enterprise Edition?
Thank you!

Actually, it is possible. I haven't done it myself, but there is a tool, DISM (Deployment Image Servicing and Management tool), that supposedly supports in-place edition upgrades, i.e. exactly what you're describing. It's talked about in Microsoft Technet at Upgrading Windows Server 2008 R2 without media - Server Core - Site Home - TechNet Blogs. It's about the same thing as a "Windows Anytime Upgrade" that you see available in Windows 7 or 8, so no reinstall is necessary.
If I recall correctly this wasn't possible in earlier versions of Windows Server, and that's probably what Reagan is remembering.
Let us know how it goes!
Best regards,
Matt

Migration SAP SolMan 7.1 MSSQL 2008 R2 Enterprise Edition to MSSQL Standard Edition

Hello,
I try to migrate a SAP SolMan 7.1 on Windows MSSQL 2008 R2 ENTERPRISE EDITION to
MSSQL 2008 R2 STANDARD EDITION.
In the source system (MSSQL 2008 R2 ENTERPRISE EDITION) there is "table compression" and
"partitioning" active.
the MSSQL STANDARD EDITION doesn`t support these two features.
So a normal DB backup on the source system and restore in the destination system is not possible.
But the tables compression I can deactivte by the SQL script
SELECT DISTINCT ‘ALTER TABLE [' + SCHEMA_NAME(schema_id) + '].[' + NAME + '] REBUILD PARTITION = ALL WITH (DATA_COMPRESSION = NONE);’
FROM sys.partitions p
join sys.objects o
on p.object_id = o.object_id
WHERE o.TYPE = ‘u’
and data_compression_desc != ‘NONE’
UNION
SELECT ‘ALTER INDEX ALL ON [' + SCHEMA_NAME(schema_id) + '].[' + NAME + '] REBUILD PARTITION = ALL WITH (DATA_COMPRESSION = NONE);’
FROM sys.partitions p
join sys.objects o
on p.object_id = o.object_id
WHERE o.TYPE = ‘u’
and data_compression_desc != ‘NONE’
is there a way to undo or deactivate the the SQL table partitioning without any data lost ?
Or is there a other way to migrate a SAP SolMan 7.1 form MSSQL 2008 R2 ENTERPRISE EDITION to MSSQL 2008 R2 STANDARD EDITION ?
Best regards
A. Moore

Hi Moore
Could you refer the SAP Note for MS Sql Version supports
1076022 - Release planning for Microsoft SQL Server 2008 (R2)
and MS SQL table compression & decompression SAP Note
1488135 - Database compression for SQL Server
BR
SS

SAP cannot start Oracle after Upgrading to 10g

I have upgraded Oracle to 10g (10.2). After upgrading I run startsap but sapstart can start Oracle database but R3trans cannot verify that the database is started.
the following log are in startdb.log. Please give me an idea what to do to solve this problem.
S27adm 22> more startdb.log
Mon Jun 2 13:00:22 GMT: 2008
LOGFILE FOR STARTING ORACLE
Mon Jun 2 13:00:22 GMT: 2008
checking required environment variables
ORACLE_HOME is >/oracle/S27/102_64<
ORACLE_SID   is >S27<
Mon Jun 2 13:00:22 GMT: 2008
check initora
Mon Jun 2 13:00:22 GMT: 2008
check initora
Mon Jun 2 13:00:22 GMT: 2008
checking V2 connect
TNS Ping Utility for HPUX: Version 10.2.0.2.0 - Production on 02-JUN-2008 13:00:22
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/oracle/S27/102_64/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (COMMUNITY = SAP.WORLD)(PROTOCOL = TCP)(HOST = er3asu81)(PORT = 1553)) (CONNECT_DATA = (SERVER = DEDICATED) (
SERVICE_NAME = S27.world)))
OK (0 msec)
tnsping: V2 connect to S27
Mon Jun 2 13:00:22 GMT: 2008
Connect to the database to check the database state:
R3trans: connect check finished with return code: 12
Database not available
Mon Jun 2 13:00:22 GMT: 2008
Shutdown database
First trying to shutdown the database - May be,
the database is in the nomount or mount state
Mon Jun 2 13:00:22 GMT: 2008
starting database
SQL*Plus: Release 10.2.0.2.0 - Production on Mon Jun 2 13:00:23 2008
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 2533359616 bytes
Fixed Size                  2199816 bytes
Variable Size            2025713400 bytes
Database Buffers          503316480 bytes
Redo Buffers                2129920 bytes
Database mounted.
SP2-0158: unknown SET option "charwidth"
no rows selected
Not a terminal
Not a terminal
Database altered.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning and Data Mining options
Mon Jun 2 13:00:46 GMT: 2008
Connect to the database to verify, that the database is now open
R3trans check finished with return code: 12
ERROR: Startup of database failed
    Notify Database Administrator.
Mon Jun 2 13:00:46 GMT: 2008
/usr/sap/S27/SYS/exe/run/startdb: Terminating with error code 2

Verify .dbenv* files in your <sid>adm home directory and update them as recommended in 10g upgrade documentation in the SAP Marketplace.
If still not resolved, do R3trans -d from <sid>adm home directory and post the recent trans.log file to review further.
Good Luck
Nag Anthati

How to handle common system crashes in SAP Business One until you upgrade to SAP Business One 9.1?

SAP Business One 9.1 is about to release in this year with many feature enhancements in various areas, such as in Business Logic and Localization, Reporting and Analytics, Lifecycle Management and Support, SDK Features for extensibility, Infrastructure and Architecture, etc. , with this upgrade every organization using SAP Business One is also expecting that some previous System Crash problems associated with SAP Business One 8.8 or 9.0, will also be resolved with the advent of 9.1.
But until 9.1 is available in GA, we have to know and follow some procedures to avoid this situation. Through this blog we have addressed ‘How to handle common system crashes in SAP Business One until you upgrade to SAP Business One 9.1’. In below link you can have a look that what common system crash issues been reported and what solution given by the community members:
common system crashes in SAP Business One

Hi,
Thanks for sharing valuable information with us. You may repost this discussion as "Document" or Blog type.
Thanks & Regards,
Nagarajan

SAP Best Practice For Unicode Upgrades - NetWeaver 2004s

Team SAP,
I have a customer that is starting to plan for a Unicode upgrade. The question from the customer is as follows:
What is the SAP Best Practice for Unicode Upgrades? They will be upgrading from a BW 3.5 System to NetWeaver 2004s, and their question is ... should they:
a) Perform the Unicode Upgrade At The Same Time As Their BW 3.5 > NetWeaver 2004s Upgrade, or
b) Perform NetWeaver 2004s Upgrade first, and then at a later date, perform the Unicode Upgrade?
Thank you in advance for any guidance or counsel you may be able to offer.
-M

Hi Michael,
Check these links:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ee7407a0-0501-0010-81ae-e329029b1074
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7e259990-0201-0010-6085-e7c5aec5af1d
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5411d290-0201-0010-b49b-a6145fb16d15
Bye
Dinesh

Integration SAP Sol Man Service Desk and HP OV Service Desk

Hi!
We have installed SAP SM 4.0 and we also use HP OV Service Desk 4.5.And now we want to integrate both this solution.
As I understand, the interaction is realised wia web interface
In pdf file "Incident Exchange Service between HP OpenView Service Desk 4.5 and SAP Solution Manager 4.0 Service Desk" I have read what needed interface (or service) is integrated to the HP OV SD. But our administrator of HP OpenView Service
Desk sad that where no this srvice.
Are anybody know how to integrate SAP Sol Man Service Desk and HP OV Service Desk?

Hello - the document is located at http://service.sap.com/solutionmanager - media library - technical papers - Service Desk WebServices API.
However, HP is CERTIFIED by SAP to connect to this SOAP interface - the only vendor so far (Remedy and Peregrine are in process.) HP has tested this interface at SAP and recieved certification several months ago.
I would have your HP person escalate this issue higher in HP.

What would impact if SAP GUI needs to be upgraded to the lates version 710

Hi guys
could you tell me ..
if we will do upgrade "SAP GUI needs to be upgraded to the lates version 710"
what would be the impact to 'end user GUI' and how we are addressing it?

Hi,
what do you mean by end user GUI... is that portal impact are you talking about?
also check the below threads
sap Gui 7.1
GUI Upgraded from 640 to 710
hope it may help you.
Raghu

Solution manager VS ARIS or Sol Mgr VS TTS

Gurus
What are the benefits of using Sol Mgr and ARIS or Sol Mgr and TTS together? Please give as much detail as u can.
Thanks
Rash

Gurus
What are the benefits of using Sol Mgr and ARIS or Sol Mgr and TTS together? Please give as much detail as u can.
Thanks
Rash

SAP Solution Mgr with IS-Utilities

Hello SolMan Gurus
My client is currently in the process of upgrading their SAP CRM solution to integrate with IS-U. I have checked to see if there any accelerators such as IS-U templates but unable to find any. Can anyone assist?
I have tried to check the normal SAP note - 891616 but it appears to be locked
Raj
Edited by: RajContactSAP on Jan 14, 2012 6:11 PM

ST-ICO Sp31 contains the latest roadmaps. Sometimes there is a disconnect between the BPR content and the roadmaps available.
If you are dealing with IS-U I am assuming you are facing the same difficulties I faced back a year ago, CRM/UCES/Portal based Front End and ERP based backend etc, I recommend using the Service marketplace shortcut /roadmaps to obtain the newer version of ASAP/RunSAP roadmaps

Solution Manager Enterprise Edition upgrade slow

Hi
I am performing SOMAN 7.0 upgrade to Enterprise edition by upgrading kernel 701 and SP stack 18. I have already upgraded the kernel and java stack and now in the process of upgrading ABAP. I am expereincing really slow performance of this upgrade. I have checked tp and R3trans version which is uptodate as I updated kernel. I cant see any problem with CPU utilization as well swapping. I checked the SLOGs and there are no alerting errors. I see its moving and its very slow. I am just wondering if any of you guys experienced this - is this normal since this is a upgrade?

Thanks a lot, i realize the installation following the standard add-on installation procedure!
Now i have the ST-ETP
ST     400     0024     SAPKITL434     SAP Solution Manager Tool
ST-A/PI     01M_CRM570     0000     -     Application Servicetools for CRM 500 - 7
ST-ETP     100     0000     -     SAP Solution Manager Enterprise Edition
ST-ICO     150_700     0025     SAPK-1507PINSTPL     SAP Solution Manager Implementation Cont
ST-LV     100     0001     SAPK-10001INSTLV     SAP Landscape Verification Wizard
ST-SER     701_2010_1     0002     SAPKITLOS2     SAP Solution Manager Service Tools
Then don't forget to perform step 5. After the installation steps.
Step 5 says this:
5. After the installation
              To activate SAP Solution Manager Enterprise Edition, the Enterprise Addon SM_APPLM has to be activated in the IMG of the Solution Manager System. This is done via IMG activity SAP Solution Manager->Configuration->Scenario-Specific Settings->Activate Solution Manager Enhancements.
            a) In the case of ST-400 SP15-SP17
            To use Extended Tracebility in Change Request Management activate BC-Set SOLMAN40_CHARM_CONTEXT_001 in transaction SCPR20
            b) In the case of ST-400 SP18 or higher
            The activation of BC-Set SOLMAN40_CHARM_CONTEXT_001 will be done automatically.
In my spro i don't have this options->
I see the route Activate Solution Manager Enhacements in SPRO -> Cross Scenario Settings
And in enterprise extension I only see ( SM_CRON, SM_QC_AD, SM_SSP,SM_SUPP_VAR)
I guess that this in SP24 is done automatically, but you said, that don´t forget the step 5 after installation.
update:I check for updates of SP and this add-on don´t have SP for now

SAP Sol Mgr 4.0 Upgrade to 7.0 Enterprise Edition

Similar Messages

Maybe you are looking for