I applied adgrants.sql with 'app' instead of 'apps'
Hi
I am force-reapplying AD.I.7 patch 7429271.
In the pre-steps you are to run
$ORACLE_HOME/appsutil/admin/adgrants.sql apps
but I did
$ORACLE_HOME/appsutil/admin/adgrants.sql app
it errored out on some of the commands (of course), complaining that there is in no apps schema called 'app'
So I then re-ran it properly (with apps) and it completed successfully.
I believe I am ok now. But do I need to do any cleanup of whatever it did under 'app' ? Or worse,
do I need to restore the db and start over?
This is a test instance where I am applying a total of 350 patches for baseline, and this is near the beginning.
I think I am ok, just checking.
Hi;
SQL> @$ORACLE_HOME/appsutil/admin/adgrants.sql <APPS schema name>You can ignore your steps, i belive it doesnt do anything coz sh wont find apps schema name so as you mention it through error. I suggest Keep working on other patch and pass this error
Regard
Helios
Similar Messages
-
Patch 9239090 Worker Fails On Applying MSDODPCODE.sql
EBS Version - 12.1.2 - Suse Enterprise - 10 - SP2
DB - 11.2.0.3 - s390 - zLinux
I am applying the 12.1.3 upgrade patch to our 12.1.2 instance and one worker fails with the following....
I've run this upgrade for testing purposes 4 time prior to this and never encountered this error.
I would appreciate any/all suggestions.
Thanks
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
begin dbms_aw.execute('upd'); end;
ERROR at line 1:
ORA-37605: error during OLAP AW UPDATE
ORA-00600: internal error code, arguments: [wbackstream: size], [8128], [3964],
ORA-06512: at "SYS.DBMS_AW", line 93
ORA-06512: at "SYS.DBMS_AW", line 122
ORA-06512: at line 1
Time when worker failed: Fri Feb 15 2013 16:12:05
Time when worker started job: Fri Feb 15 2013 16:12:06
Start time for file is: Fri Feb 15 2013 16:12:06
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Not sure if this is relevant or not - but the user account OLAPSYS was in a 'EXPIRED/LOCKED status. I unlocked the account - but not sure what password to use to set it to.
I also have an SR open for this - but not expecting any replies until Monday. :(
Edited by: 864641 on Feb 15, 2013 3:34 PMI also have an SR open for this - but not expecting any replies until Monday. :(
Edited by: 864641 on Feb 15, 2013 3:34 PMYou can escalate it to Sev 1 -- How To Escalate a Service Request (SR) with Oracle Support Services [ID 199389.1]
Please also see:
Patch 6678700 Worker Fails On Applying MSDODPCODE.sql With ORA-33292 Insufficient Permissions To Access Analytic Workspace APPS.ODPCODE; ORA-33262: Analytic workspace ODPCODE does not exist. [ID 1054417.1]
MSDODPCODE.SQL Fails Applying U6678700.Drv [ID 1151274.1]
When running script MSDODPCODE.sql error ORA-37002 occurs [ID 467879.1]
Upgrading 11.5 to 12 MSDODPCODE.sql or FPAMAIN.sql Fail OLAP Express APPS.ODPCODE Analytical Workspace [ID 1319007.1]
ORA-33292 Insufficient permissions to access analytic workspace APPS.ODPCODE Error When Applying Patch 9058835 [ID 977196.
Thanks,
Hussein -
Retrieve SQL with filters applied from an Interactive Report
I want to use an Interactive report as interface for providing parameters to a base report query.
I would like to capture the full SQL code from the filtered interactive report and then run the sql to create a collection.
I have found this tread
Re: Using Data from filtered Interactive Report
which says that you can use APEX_APPLICATION_PAGE_IR to access the reports SQL. This holds the information about the interactive report when the user saves it. The sql code from the interactive report (after the user has added filters) is stored in the field sql_query.I can only retrieve the base query and not the filtered version even after saving.
Any ideas how this can be done would be appreciated.
regards
PPOK Darren I think I've got it working. My solution is an adaption that follows the steps of a blog I found here: http://stewstools.wordpress.com/2009/02/19/get-ir-where-clause/
My solution allows you to click on a button and the records that are currently displayed in the IR report are saved to an APEX collection. You can then use the collection to save records to a table or run a report on another page. (I haven't included code for this last step but it's easy to find on the forum)
First a bit of background knowledge. The following APEX views hold all the information on IRs that you access via PLSQL code in the package you need to download. Run an IR report, save a version of the report, then in SQL Workshop have a look at:
select * from APEX_APPLICATION_PAGE_IR
select * from APEX_APPLICATION_PAGE_IR_COND
select * from APEX_APPLICATION_PAGE_IR_COL
select * from APEX_APPLICATION_PAGE_IR_RPT
When you run an IR report it has an internal ID that you can access and also a Base Id for each Saved report that is currently in context.
Here are the steps:
1) Download the following package and install it in the workspace schema
http://www.mediafire.com/?nj118x9vmc9
click on the link "click here to download"
2)In the HTML header Attribute of the page where your IR runs, put the following Javascript:
<!--===================================================================-->
<!--FUNCTION TO RETRIEVE IR REPORTS SQL WITH WHERE CLAUSE
<!--===================================================================-->
<script language="JavaScript" type="text/javascript">
function SaveAndRunReport() {
document.location='f?p=&APP_ID.:3:&SESSION.:CONSTRUCT_IR_QUERY:NO::'+
'P3_BASE_REPORT_ID:'+$v('apexir_REPORT_ID');
</script>
<!--===================================================================-->
Notes: You will need to obviously change the URL above to reflect your Page No. (3) and the name of a HIDDEN Item (P3_BASE_REPORT_ID) that you will populate with the base ID of the report.
Setting :P3_BASE_REPORT_ID to +$v('apexir_REPORT_ID') is an internal thing and works out of the box. It returns the Id of the Base report.
3) Create a button called SELECT_SPECIMENS (in region position - top of region) in the IR region that will initiate the execution of the IR background SQL to create a collection with the current selected records.
TARGET= URL
URL Target = javascript:SaveAndRunReport();
You might also want to create a condition that only shows the button when there are records selected
CONDITION TYPE=Exists(SQL returns at least one row)
EXPRESSION 1 - put the SQL of the IR report here.
4)Create a branch back to the same page (3) and with the REQUEST attribute set to the value in the Javascript URL above e.g. CONSTRUCT_IR_QUERY. Create a condition on the branch that uses this branch WHEN BUTTON PRESSED= SELECT_SPECIMENS
5) Create an AFTER HEADER PROCESS with the following code:
declare
v_base_query clob;
v_where clob;
v_query clob;
v_base_where varchar2(12):=' where 1=1 '; -- incase there is no where clause in the base query
begin
if apex_collection.collection_exists('IR_COLLECTION') THEN
htmldb_collection.delete_collection( p_collection_name => 'IR_COLLECTION');
end if;
--GET THE BASE QUERY OF THE IR REPORT
select sql_query
into v_base_query
from APEX_APPLICATION_PAGE_IR
where application_id=:APP_ID
and page_id=:APP_PAGE_ID; -- you can only have one IR report per page
--UNCOMMENT TO VIEW THE PARAMETERS TO THE PACKAGED FUNCTION
--raise_application_error(-20001, :APP_ID||'-'||:APP_PAGE_ID||'-'||:SESSION||'-'||:P3_BASE_REPORT_ID);
--GET THE SQL FILTER CODE
select apex_ir_query.ir_query_where(:APP_ID,:APP_PAGE_ID,:SESSION,:P3_BASE_REPORT_ID)
into v_where
from dual;
--CHECK TO SEE THAT THERE IS A "WHERE" CLAUSE IN THE BASE QUERY
if instr(upper(v_base_query),'WHERE ') > 0 then
v_query:=v_base_query||' '||v_where;
else
v_query:=v_base_query||' '||v_base_where||' '||v_where;
end if;
--UNCOMMENT TO SEE THE FULL QUERY SYNTAX
--raise_application_error(-20001,v_query);
--CREATE COLLECTION FROM IR RECORDS
apex_collection.create_collection_from_query(P_collection_name=>'IR_COLLECTION',p_query=>v_query);
exception
when others then
raise_application_error(-20001, 'Interactive report not found. Contact Administrator. Could not create collection of records.');
end;
remember to update P3_BASE_REPORT_ID above to your HIDDEN ITEM name.
Set the following attributes for the process above
CONDITIONAL PROCESSING
CONDITION TYPE = Request=Expression 1
EXPRESSION 1 --> CONSTRUCT_IR_QUERY (Note: this was set on the branch in step 4 above)
6) Run the IR report, click on the "SELECT SPECIMENS" button then click on the Session link on the Developer's Toolbar and select VIEW COLLECTIONS from the popup list then click GO. You should now see the IR records.
By the way I've been testing in IE not Firefox.
...and that's it!
enjoy
Paul P -
Install instructions for Search Modeler and integrating with Apps 11i
Below are all the steps I took for creating integrating Search Modeler with an Oracle E-Business Suite 11.5.10.2 ATG RUP 7 instance called ERNIE.
Much thanks to Oracle Support ( Rajesh Ghosh, Vikas Soolapani and Roger Ford), as this simply wouldn't have been possible without them.
There are a few things in this document that may not be pertinent to your environment if you're doing this. I've made attempts to clarify those possibly optional sections in the documentation.
I've broken the document down into the following multiple parts
o Setting up a new RedHat 4.8 x86 server called ausSEARCHdev (The server is in AUStin, TX, is dedicated to SEARCH, and is for our DEV environment)
o SES (Secure Enterprise Search 10.1.8.2 install
o SES 10.1.8.4 patchset install
o SES CPU patch apply
o Standalone OC4J and ADF installation
o Search Modeler installation and configuration
o Configure ERNIE Apps instance to be on valid self-signed SSL certificate
o Import ERNIE SSL certificate into SES and Search Modeler
using aussearchdev initially
rh4 x86, default oracle build
** htop and collectl are open source free performance monitoring packages we utilize**
--start
install htop and collectl
wget http://dag.wieers.com/rpm/packages/htop/htop-0.7-1.el4.rf.i386.rpm
rpm -ivh htop-0.7-1.el4.rf.i386.rpm
wget http://downloads.sourceforge.net/project/collectl/collectl/collectl-3.4.0-4/collectl-3.4.0-4.noarch.rpm?use_mirror=voxel
rpm -ivh collectl-3.4.0-4.noarch.rpm
chkconfig collectl on
service collectl start
**We still need to install the necessary rpms so that collectl logs are compressed
--end
useradd -u 501 oracle
groupadd -g 504 dba
usermod -G 504 oracle
verification:
[root@aussearchdev ~]# su - oracle
[oracle@aussearchdev ~]$ id
uid=501(oracle) gid=501(oracle) groups=501(oracle),504(dba)
passwd oracle
** /mnt/oraclebackup is a network dumpspot we use to hold Software installs, RPMs, etc
** /mnt/rpms is a network dumpspot we use to hold ISOs for OS software such as Redhat Linux
mkdir /mnt/oraclebackup
mkdir /mnt/rpms
add the following to /etc/fstab
XXXXXXX:/patches/oraclebackup /mnt/oraclebackup nfs defaults,hard,nolock 0 0
XXXXXXX:/esxpress/nfs /mnt/rpms nfs rw,addr=XXX.XXX.XXX.XXX 0 0
mount /mnt/rpms
Next need to install various oracle needed RPMs.
cd /mnt/rpms/rh40_upd8/RedHat/RPMS/
rpm -ivh perl-Compress-Zlib-1.42-1.el4.i386.rpm
rpm -ivh libaio-devel-0.3.105-2.i386.rpm
rpm -ivh sysstat-5.0.5-25.el4.i386.rpm
rpm -ivh unixODBC-devel-2.2.11-1.RHEL4.1.i386.rpm
service collectl restart
cd /tmp
wget http://oss.oracle.com/el4/oracle-validated/oracle-validated-1.0.0-18.el4.i386.rpm
rpm -ivh oracle-validated-1.0.0-18.el4.i386.rpm
Now we should have all the RPMs we need.
cd /etc/sysconfig/oracle-validated
./oracle-validated-verify
cd /var/log/oracle-validated/results
more orakernel.log
uname -a
should return 2.6.9 or higher
rpm -qa|grep gcc-
should return 3.4.3 or higher
rpm -qa|grep glibc
should return 2.3.4-2.9 or higher
rpm -qa|grep make
should return 3.80 or higher
rpm -qa|grep binutils
should return 2.15.92.0.2 or higher
rpm -qa|grep openmotif
should return 2.2.3-9.RHEL4.1 or higher
rpm -qa|grep compat-db
should return 4.1.25-9 or higher
rpm -qa|grep setarch
should return 1.6-1 or higher
cat /proc/sys/kernel/sem
should return 250 32000 100 128 or higher (250 32000 100 142 in our case)
cat /proc/sys/kernel/shmall (1073741824 in our case)
should return 2097152 or higher
cat /proc/sys/kernel/shmmax
should return half the size of physical memory (4294967295 in our case - NO LARGER on 32-bit OS)
cat /proc/sys/kernel/shmmni
should return 4096
cat /proc/sys/fs/file-max
should return 65536 (327679 in our case)
cat /proc/sys/net/ipv4/ip_local_port_range
should return 1024 65000
values in /etc/security/limits.conf set by oracle-validated rpm, no changes necessary
add the following line to /etc/pam.d/login
session required /lib/security/pam_limits.so
add the following to /etc/profile
if [ $USER = "oracle" ]; then
if [ $SHELL = "/bin/ksh" ]; then
ulimit -p 16384
ulimit -n 65536
else
ulimit -u 16384 -n 65536
fi
fi
mkdir -p /d01/oracle
chmod 777 /d01/oracle
init 6 the box (aka reboot)
Time to start the SES 10.1.8.2 installer
running SES 10.1.8.2 installer
as oracle
cd /mnt/oraclebackup/deathstar_patches/SES/SES10182
./runInstaller
search server name sesprod
administrative password XXXXXXXX for dev,
http port 7777
destination path /d01/oracle/10.1.8/sesdev (dev)
data storage path /d01/oracle/sesdevdata (dev)
next
inventory /d01/oracle/oraInventory
dba group
run orainstroot.sh as requested
continue
all tests should pass, continue
finished clean
tried logging in to admin console at http://aussearchdev:7777/search/admin - worked fine
tried bringing up search query at http://aussearchdev:7777/search/query/search - worked fine
Now we need to get to 10.1.8.4 of SES
(yes, you need to keep the system up)
cd /mnt/oraclebackup/deathstar_patches/SES/SES10184/ses_10184pst_linux/
./runInstaller
Destination, choose sesdev
Next
Patchset successful
tried logging in to admin console at http://aussearchdev:7777/search/admin - worked fine
tried bringing up search query at http://aussearchdev:7777/search/query/search - worked fine
Apply CPU Patch to SES
CPU JAN 10 says patch 9119261 is required - but patch requires extended support contract
CPU OCT 09 says patch 8836540 is required - but patch requires extended support contract
CPU JUL 09 says patch 8534394 is required - but patch requires extended support contract
CPU APR 09 says patch 8290534 is required - and you can actually download it
Need opatch from 6880880
cp -r /mnt/oraclebackup/deathstar_patches/SES/CPUAPR09/OPatch $ORACLE_HOME
export PATH=$ORACLE_HOME/OPatch:$PATH
shut down everything
cd $ORACLE_HOME/bin
./searchctl stopall
cd /mnt/oraclebackup/deathstar_patches/SES/CPUAPR09/8290534
opatch apply
cd $ORACLE_HOME/cpu/CPUApr2009
**Note: your sys password is what you set for your administrative password above
sqlplus "sys/XXXXXX" as sysdba;
startup
@catcpu
@?/rdbms/admin/utlrp
shutdown immediate
exit
cd /d01/oracle/10.1.8/sesdev/cpu/view_recompile/
sqlplus "sys/XXXXXXX" as sysdba;
startup upgrade;
@view_recompile_jan2008cpu.sql
@?/rdbms/admin/utlrp
shutdown immediate
cd /d01/oracle/10.1.8/sesdev/jdk/jre/lib/ext
mv mail.jar $HOME/mail.jar.backup02222010
mv mailapi.jar $HOME/mailapi.jar.back02222010
cp /d01/oracle/10.1.8/sesdev/search/lib/mail.jar .
SES 10.1.8.4 is now installed and updated with latest available CPU
tried logging in to admin console at http://aussearchdev:7777/search/admin - worked fine
tried bringing up search query at http://aussearchdev:7777/search/query/search - worked fine
we're going to go with the standalone OC4j 10.1.3.3 and Oracle ADF 10.1.3.3 method
The URLs for these products are
http://blogs.oracle.com/ebssearch/2009/10/available_now_oracle_search_modeler_11_for_oracle_e-business_suite_11i.html
and specifically
OC4J - http://download.oracle.com/otn/java/oc4j/101330/oc4j_extended_101330.zip
ADF - http://www.oracle.com/technology/software/products/jdev/htdocs/adfinstaller10133.html
OC4J install
First you need to have Java 1.5 on the machine. Latest is 1.5.0_22. Package is in /mnt/oraclebackup/deathstar_patches/SES
as root on aussearchdev
cd /usr/local
cp /mnt/oraclebackup/deathstar_patches/SES/jdk-1_5_0_22-linux-i586.bin .
chmod 700 jdk-1_5_0_22-linux-i586.bin
./jdk-1_5_0_22-linux-i586.bin
yes
install OC4J just by copying over the directory
as oracle on aussearchdev
mkdir -p /d01/oracle/oc4j
cd /d01/oracle/oc4j
cp -r /mnt/oraclebackup/deathstar_patches/SES/oc4j/* .
ADF install
vi /mnt/oraclebackup/deathstar_patches/SES/adf/adfinstaller.properties
change the following
OracleHome = /mnt/oraclebackup/deathstar_patches/SES/adf
DesHome = /d01/oracle/oc4j/
type = OC4J
as root
cd /usr/bin
rm java
(yes)
ln -s /usr/local/jdk1.5.0_22/bin/java
su - oracle
java -version should now return 1.5.0_22
export JAVA_HOME=/usr/local/jdk1.5.0_22
cd /mnt/oraclebackup/deathstar_patches/SES/adf
java -jar runinstaller.jar -version
returns The version for the ADF libraries being installed is 10.1.3.41.57 - yes, that is apparently 10.1.3.3.
java -jar runinstaller.jar adfinstaller.properties
output looks good, do not be concerned by
WARNING: 'Could not delete: /d01/oracle/oc4j/BC4J/redist/bc4j' whilst deleting bc4j application
WARNING: 'Could not delete: /d01/oracle/oc4j/BC4J/redist/datatags' whilst deleting datatags application
as it was trying to delete the old version that didn't exist
Start OC4J
as oracle on aussearchdev
export JAVA_HOME=/usr/local/jdk1.5.0_22
export ORACLE_HOME=/d01/oracle/oc4j
cd $ORACLE_HOME/bin
./oc4j -start
you will be prompted for password - we're setting it. use XXXXXXXXXX
after it's up, kill it (ctrl-c) and restart it with
nohup ./oc4j -start &
last lines in nohup.out is
Starting OC4J from /d01/oracle/oc4j/j2ee/home ...
10/02/23 03:22:38 Oracle Containers for J2EE 10g (10.1.3.3.0) initialized
So now on to search modeler installation, going by Installation steps in Note 781366.1
8326128 - This is not a patch to be applied to the Apps, keep reading
as oracle on aussearchdev
cd /mnt/oraclebackup/deathstar_patches/SES/8326128
mkdir -p /d01/oracle/oc4j/uploaded
vi build.properties, changing
installation.type=OC4J
oracle.home=/d01/oracle/oc4j
deploy.server=aussearchdev.domainname.com
deploy.port=23791
web.port=7777
password=XXXXXXXXX
extra.classpath=/d01/oracle/oc4j/uploaded
now set the following environment values in your ssh session
export ORACLE_HOME=/d01/oracle/oc4j
export JAVA_HOME=/usr/local/jdk1.5.0_22
export PATH=$ORACLE_HOME/ant/bin:$ORACLE_HOME/bin:$PATH
ant main
whole bunch of stuff to screen, errors due to undeploy something that doesn't exist. Finished after a minute with
BUILD SUCCESSFUL
Total time: 58 seconds
Now on to post install steps
restart OC4j
cd $ORACLE_HOME/bin
./modeler.sh -shutdown -port 23791 -password r*l*r*0*
export ORACLE_HOME=/d01/oracle/oc4j
export JAVA_HOME=/usr/local/jdk1.5.0_22
export PATH=$ORACLE_HOME/ant/bin:$ORACLE_HOME/bin:$PATH
nohup ./modeler.sh -start &
end of nohup.out should show
Starting OC4J from /d01/oracle/oc4j/j2ee/home ...
Try going to http://aussearchdev:8888/modeler/faces/ModelerHome.jsp
Should get login screen, but wait, we haven't installed Oracle Apps interface yet...
Next let's do the Apps side of things
Going by note 953378.1
Using ERNIE (a development instance of E-Business Suite running 11.5.10.2 ATG RUP 7)
as applmgr on ausernieapp (ausernieapp is our app tier)
shut down apps services
apps patch 8225631
verify all the pre-req patches are in ERNIE
select * from ad_bugs where bug_number = '5903765';
select * from ad_bugs where bug_number = '6372396';
select * from ad_bugs where bug_number = '3219567';
select * from ad_bugs where bug_number = '3264822';
select * from ad_bugs where bug_number = '3261254';
select * from ad_bugs where bug_number = '5161676';
select * from ad_bugs where bug_number = '3036401';
select * from ad_bugs where bug_number = '3263588';
select * from ad_bugs where bug_number = '3264818';
select * from ad_bugs where bug_number = '3218526';
select * from ad_bugs where bug_number = '3263645';
select * from ad_bugs where bug_number = '4206794';
select * from ad_bugs where bug_number = '3262486';
select * from ad_bugs where bug_number = '3261243';
select * from ad_bugs where bug_number = '2614213';
select * from ad_bugs where bug_number = '3262159';
select * from ad_bugs where bug_number = '2819091';
select * from ad_bugs where bug_number = '3412795';
patch went in smooth
Log in to ERNIE Apps GUI as sysadmin user responsibility
Give users such as sysadmin FND Search Crawler responsibility
Go to system profile options, set
set FND: Search Enabling Flag to Y at site level
as applmgr on ausernieapp
cd /d01/oracle/ernieappl/fnd/11.5.0/patch/115/sql
sqlplus apps/$APPS_PWD @AFSRCHCF
Enter SES endpoint URL [e.g. http://ap637atg.us.oracle.com:7780]: http://aussearchdev.domainname.com:7777
Enter Apps Admin username [e.g. sysadmin]: sysadmin
Enter Apps Admin password: sysadmin_password
Enter SES Admin username [e.g. eqsys]: eqsys
Enter SES Admin password: eqsyspassword <-- This is the same as sys's password
on aussearchdev as oracle
had to kill modeler and start all the processes, so
kill -9 the modeler oc4j process, then
cd $ORACLE_HOME/bin
./searchctl startall
enter the password when prompted
in IE browser go to
http://aussearchdev.domainname.com:7777/search/admin
log in with eqsys password
global settings tab
identity management setup
click circle next to oracle.search.plugin.security.identity.ebs.EBS12IdentityPliginMgr
(yes, we're going with 12 even though we use Oracle Apps 11i)
http end point https://ausernieapp.domainname.com:8443/webservices/AppSearch/SecurityService
username sysadmin
password XXXXXXX
finish
Global Settings
Federation Trusted Entitites
####entity name sysadmin
####Entity Password XXXXXXXX
According to web conference with Oracle, this should NOT be eqsys but instead be sysadmin from above.
Select the Use Entity Plug-in for authentication check box
add
Trying to go to http://aussearchdev.domainname.com:7777/search/query/search and login (sysadmin / password)
stop midtier on both SES and Apps
cd $ORACLE_HOME/bin
./searchctl stopall
./adstpall.sh apps/$APPS_PWD on EBS app tier
start midtier on both SES and Apps
cd $ORACLE_HOME/bin
./searchctl startall
./adstrtal.sh apps/$APPS_PWD on EBS app tier
Now try and log in to Oracle SES user interface to verify the configuration
http://aussearchdev.domainname.com:7777/search/query
Now start up modeler again
export JAVA_HOME=/usr/local/jdk1.5.0_22
export ORACLE_HOME=/d01/oracle/oc4j
export PATH=$ORACLE_HOME/bin:$PATH
cd $ORACLE_HOME/bin
nohup ./modeler.sh -start &
Works now.
Now go to http://aussearchdev.domainname.com:8888/modeleradmin/AdminHome.jsp log in as oc4jadmin/XXXXXXX
Configure new target
Target Type 11i
Description ERNIE
Name ERNIE
EBS Database Host Name auserniedb
EBS Database Port 1521
EBS Database SID ERNIE
username apps
password XXXXXXXXx
oc4jadmin XXXXXXXx
export JAVA_HOME=/usr/local/jdk1.5.0_22
export ORACLE_HOME=/d01/oracle/oc4j
export PATH=$ORACLE_HOME/bin:$PATH
cd $ORACLE_HOME/j2ee/home
java -jar admin_client.jar deployer:oc4j:aussearchdev oc4jadmin XXXXXXXXX -addDataSourceConnectionPool -name "ERNIE2-pool" -factoryClass "oracle.jdbc.pool.OracleDataSource" -dbUser "apps" -dbPassword "XXXXXXX" -url "jdbc:oracle:thin:@auserniedb.domainname.com:1521:ERNIE" -applicationName appsearch
java -jar admin_client.jar deployer:oc4j:aussearchdev oc4jadmin XXXXXXX -addManagedDataSource -name "ERNIEDS" -jndiLocation "jdbc/ERNIEDS" -connectionPoolName "ERNIE2-pool" -applicationName appsearch
http://aussearchdev.domainname.com:8888/modeler/faces/ModelerHome.jsp
So, creating a self signed SSL certificate for ERNIE EBS instance (this will not work if you use an SSL certificate for another server like say, PROD)
doing this on ausernieapp
openssl genrsa -des3 -out ausernieapp.key 1024
PEM key is ausernieapp
openssl req -new -key ausernieapp.key -out ausernieapp.csr
PEM key is ausernieapp
Country US
State Texas
Locality Austin
Organization Name Corporation
Organizational Unit Name Information Technology
Common Name ausernieapp.domainname.com
Email address [email protected]
No challenge password
No optional company name
Now let's remove the passphrase from the key
cp ausernieapp.key ausernieapp.key.orig
openssl rsa -in ausernieapp.key.orig -out ausernieapp.key
Now let's generate a self-signed certificate
openssl x509 -req -days 1000 -in ausernieapp.csr -signkey ausernieapp.key -out ausernieapp.crt
Install the private key and certificate
cd $IAS_ORACLE_HOME/Apache/Apache/conf/ssl.crt
cp server.crt server.crt.backup.03102010
chown applmgr:applmgr server.crt.backup.03102010
cp $HOME/ausernieapp.crt /d01/oracle/ernieora/new/iAS/Apache/Apache/conf/ssl.crt/server.crt
cd $IAS_ORACLE_HOME/Apache/Apache/conf/ssl.key/
cp server.key server.key.backup.03102010
cp $HOME/ausernieapp.key /d01/oracle/ernieora/new/iAS/Apache/Apache/conf/ssl.key/server.key
chown applmgr:applmgr server.key.backup.03102010
bounce apache as applmgr
cd /d01/oracle/erniecomn/admin/scripts/ERNIE_ausernieapp
./adapcctl.sh stop
./adapcctl.sh start
In IE
https://ausernieapp.domainname.com:8443
Continue
Click on Certificate Error next to URL bar
Install Certificate -> Next-> Place all certificates in the following store -> trusted root certificate authorities ->finish
close browser, back to https://ausernieapp.domainname.com:8443
no errors,
Next step will be to import key into the SES and Search modelers
as oracle on aussearchdev
cd /d01/oracle/10.1.8/sesdev/jdk/jre/lib/security/
cp cacerts cacerts.backup.03102010
scp root@ausernieapp:/root/ausernieapp.crt .
export LANG=c
export PATH=$ORACLE_HOME/jdk/bin:$PATH
keytool -keystore ./cacerts -storepass changeit -alias rootausernieapp -import -trustcacerts -file ausernieapp.crt
--output
Owner: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Issuer: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Serial number: b4e92089cf73076f
Valid from: Wed Mar 10 13:22:38 CST 2010 until: Tue Dec 04 13:22:38 CST 2012
Certificate fingerprints:
MD5: 2C:6B:EE:1A:63:6D:XX:A6:05:90:F6:XX:DD:88:F7:80
SHA1: F8:DC:E5:2A:3E:68:XX:E1:EA:E4:75:AE:CC:4F:4A:10:2F:8A:FE:9B
Trust this certificate? [no]: yes
Certificate was added to keystore
Now load our cert
keytool -keystore ./cacerts -import -trustcacerts -file ausernieapp.crt
keytool -list -v -keystore ./cacerts now shows
Alias name: rootausernieapp
Creation date: Mar 10, 2010
Entry type: trustedCertEntry
Owner: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Issuer: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Serial number: b4e92089cf73076f
Valid from: Wed Mar 10 13:22:38 CST 2010 until: Tue Dec 04 13:22:38 CST 2012
Certificate fingerprints:
MD5: 2C:6B:EE:1A:63:6D:CB:XX:05:90:F6:78:DD:88:F7:80
SHA1: F8:DC:E5:2A:3E:68:9C:CE:EA:4E:75:AE:CC:FA:9E:10:2F:8A:FE:9B
Now we need to load it into the search modeler keystore
as root on aussearchdev
export JAVA_HOME=/usr/local/jdk1.5.0_22/
export PATH=$JAVA_HOME/bin:$PATH
cd /usr/local/jdk1.5.0_22/jre/lib/security/
scp root@ausernieapp:/root/ausernieapp.crt .
output
keytool -keystore ./cacerts -import -trustcacerts -file ausernieapp.crt
Enter keystore password: changeit
Owner: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Issuer: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Serial number: b4e92089cf73076f
Valid from: Wed Mar 10 13:22:38 CST 2010 until: Tue Dec 04 13:22:38 CST 2012
Certificate fingerprints:
MD5: 2C:6B:EE:1A:63:6D:CB:A1:05:90:F6:78:DD:88:F7:80
SHA1: F8:DC:E5:2A:3E:68:9C:CE:EA:4E:75:AE:CC:4F:9E:10:2F:8A:FE:9B
Trust this certificate? [no]: yes
Certificate was added to keystore
[root@aussearchdev security]#
output
For troubleshooting, if you go to end of /d01/oracle/10.1.8/sesdev/search/data/config/crawler.dat
you can modify the logLevel from the default of 4 to 2 to get better debug data. No services need to be restarted, it will become active with the next crawl.
While talking with Oracle, they mentioned the following patches
The patches identified 8321527 and 7586924 are SES patches to help with indexing
They also identified patch 9103851 which is an apps patch dealing with responsibilities <-- This is not yet available
Applying patch 7586924
as oracle on aussearchdev
cd $ORACLE_HOME/bin
./searchctl stopall
cd /mnt/oraclebackup/deathstar_patches/SES/post_patches/7586924
opatch apply
cd $ORACLE_HOME/bin
./searchctl startall
sqlplus eqsys/XXXXXX@SESDEV
define SCH_NAME=EQSYS
define PROXY_USER=EQPROXY
define INST_USER=EQ_TEST
@$ORACLE_HOME/search/admin/eq0pkh.sql
@$ORACLE_HOME/search/admin/eq0plb.sql
@$ORACLE_HOME/search/admin/eq0bug_7586924.sql
cd $ORACLE_HOME/search/data/config/
cp crawler.dat crawler.dat.backup.03102010
vi crawler.dat
We're using the Oracle E-Business Suite R12 crawler, so we will add the line
USE_IN_MEMORY_QUEUE Oracle E-Business Suite R12
as the line immediately preceding IMPORT -
so the end of the file looks like this:
# system properies: separated by space for multiple system properties or define multiple SYSTEM_PROPERTIES
# logLevel values: DEBUG(2), INFO(4), WARN(6), ERROR(8), FATAL(10)
SYSTEM_PROPERTIES -Doracle.search.logLevel=4 -Doracle.search.log=oracle.search.util.Log4jImpl
USE_IN_MEMORY_QUEUE Oracle E-Business Suite R12
IMPORT -
Now on to patch 8321527
cd /mnt/oraclebackup/deathstar_patches/SES/post_patches/8321527
cd $ORACLE_HOME/bin
./searchctl stopall
cd -
opatch apply
cd $ORACLE_HOME/bin
./searchctl startall
sqlplus eqsys/XXXXXXX@SESDEV
define SCH_NAME=EQSYS
define PROXY_USER=EQPROXY
select object_name from user_objects where status = 'INVALID';
--should be no rows selected
@$ORACLE_HOME/search/admin/eq0pkh.sql
@$ORACLE_HOME/search/admin/eq0plb.sql
--should be no rows selected
restart SES
cd -
./searchctl stopall
./searchctl startallBelow are all the steps I took for creating integrating Search Modeler with an Oracle E-Business Suite 11.5.10.2 ATG RUP 7 instance called ERNIE.
Much thanks to Oracle Support ( Rajesh Ghosh, Vikas Soolapani and Roger Ford), as this simply wouldn't have been possible without them.
There are a few things in this document that may not be pertinent to your environment if you're doing this. I've made attempts to clarify those possibly optional sections in the documentation.
I've broken the document down into the following multiple parts
o Setting up a new RedHat 4.8 x86 server called ausSEARCHdev (The server is in AUStin, TX, is dedicated to SEARCH, and is for our DEV environment)
o SES (Secure Enterprise Search 10.1.8.2 install
o SES 10.1.8.4 patchset install
o SES CPU patch apply
o Standalone OC4J and ADF installation
o Search Modeler installation and configuration
o Configure ERNIE Apps instance to be on valid self-signed SSL certificate
o Import ERNIE SSL certificate into SES and Search Modeler
using aussearchdev initially
rh4 x86, default oracle build
** htop and collectl are open source free performance monitoring packages we utilize**
--start
install htop and collectl
wget http://dag.wieers.com/rpm/packages/htop/htop-0.7-1.el4.rf.i386.rpm
rpm -ivh htop-0.7-1.el4.rf.i386.rpm
wget http://downloads.sourceforge.net/project/collectl/collectl/collectl-3.4.0-4/collectl-3.4.0-4.noarch.rpm?use_mirror=voxel
rpm -ivh collectl-3.4.0-4.noarch.rpm
chkconfig collectl on
service collectl start
**We still need to install the necessary rpms so that collectl logs are compressed
--end
useradd -u 501 oracle
groupadd -g 504 dba
usermod -G 504 oracle
verification:
[root@aussearchdev ~]# su - oracle
[oracle@aussearchdev ~]$ id
uid=501(oracle) gid=501(oracle) groups=501(oracle),504(dba)
passwd oracle
** /mnt/oraclebackup is a network dumpspot we use to hold Software installs, RPMs, etc
** /mnt/rpms is a network dumpspot we use to hold ISOs for OS software such as Redhat Linux
mkdir /mnt/oraclebackup
mkdir /mnt/rpms
add the following to /etc/fstab
XXXXXXX:/patches/oraclebackup /mnt/oraclebackup nfs defaults,hard,nolock 0 0
XXXXXXX:/esxpress/nfs /mnt/rpms nfs rw,addr=XXX.XXX.XXX.XXX 0 0
mount /mnt/rpms
Next need to install various oracle needed RPMs.
cd /mnt/rpms/rh40_upd8/RedHat/RPMS/
rpm -ivh perl-Compress-Zlib-1.42-1.el4.i386.rpm
rpm -ivh libaio-devel-0.3.105-2.i386.rpm
rpm -ivh sysstat-5.0.5-25.el4.i386.rpm
rpm -ivh unixODBC-devel-2.2.11-1.RHEL4.1.i386.rpm
service collectl restart
cd /tmp
wget http://oss.oracle.com/el4/oracle-validated/oracle-validated-1.0.0-18.el4.i386.rpm
rpm -ivh oracle-validated-1.0.0-18.el4.i386.rpm
Now we should have all the RPMs we need.
cd /etc/sysconfig/oracle-validated
./oracle-validated-verify
cd /var/log/oracle-validated/results
more orakernel.log
uname -a
should return 2.6.9 or higher
rpm -qa|grep gcc-
should return 3.4.3 or higher
rpm -qa|grep glibc
should return 2.3.4-2.9 or higher
rpm -qa|grep make
should return 3.80 or higher
rpm -qa|grep binutils
should return 2.15.92.0.2 or higher
rpm -qa|grep openmotif
should return 2.2.3-9.RHEL4.1 or higher
rpm -qa|grep compat-db
should return 4.1.25-9 or higher
rpm -qa|grep setarch
should return 1.6-1 or higher
cat /proc/sys/kernel/sem
should return 250 32000 100 128 or higher (250 32000 100 142 in our case)
cat /proc/sys/kernel/shmall (1073741824 in our case)
should return 2097152 or higher
cat /proc/sys/kernel/shmmax
should return half the size of physical memory (4294967295 in our case - NO LARGER on 32-bit OS)
cat /proc/sys/kernel/shmmni
should return 4096
cat /proc/sys/fs/file-max
should return 65536 (327679 in our case)
cat /proc/sys/net/ipv4/ip_local_port_range
should return 1024 65000
values in /etc/security/limits.conf set by oracle-validated rpm, no changes necessary
add the following line to /etc/pam.d/login
session required /lib/security/pam_limits.so
add the following to /etc/profile
if [ $USER = "oracle" ]; then
if [ $SHELL = "/bin/ksh" ]; then
ulimit -p 16384
ulimit -n 65536
else
ulimit -u 16384 -n 65536
fi
fi
mkdir -p /d01/oracle
chmod 777 /d01/oracle
init 6 the box (aka reboot)
Time to start the SES 10.1.8.2 installer
running SES 10.1.8.2 installer
as oracle
cd /mnt/oraclebackup/deathstar_patches/SES/SES10182
./runInstaller
search server name sesprod
administrative password XXXXXXXX for dev,
http port 7777
destination path /d01/oracle/10.1.8/sesdev (dev)
data storage path /d01/oracle/sesdevdata (dev)
next
inventory /d01/oracle/oraInventory
dba group
run orainstroot.sh as requested
continue
all tests should pass, continue
finished clean
tried logging in to admin console at http://aussearchdev:7777/search/admin - worked fine
tried bringing up search query at http://aussearchdev:7777/search/query/search - worked fine
Now we need to get to 10.1.8.4 of SES
(yes, you need to keep the system up)
cd /mnt/oraclebackup/deathstar_patches/SES/SES10184/ses_10184pst_linux/
./runInstaller
Destination, choose sesdev
Next
Patchset successful
tried logging in to admin console at http://aussearchdev:7777/search/admin - worked fine
tried bringing up search query at http://aussearchdev:7777/search/query/search - worked fine
Apply CPU Patch to SES
CPU JAN 10 says patch 9119261 is required - but patch requires extended support contract
CPU OCT 09 says patch 8836540 is required - but patch requires extended support contract
CPU JUL 09 says patch 8534394 is required - but patch requires extended support contract
CPU APR 09 says patch 8290534 is required - and you can actually download it
Need opatch from 6880880
cp -r /mnt/oraclebackup/deathstar_patches/SES/CPUAPR09/OPatch $ORACLE_HOME
export PATH=$ORACLE_HOME/OPatch:$PATH
shut down everything
cd $ORACLE_HOME/bin
./searchctl stopall
cd /mnt/oraclebackup/deathstar_patches/SES/CPUAPR09/8290534
opatch apply
cd $ORACLE_HOME/cpu/CPUApr2009
**Note: your sys password is what you set for your administrative password above
sqlplus "sys/XXXXXX" as sysdba;
startup
@catcpu
@?/rdbms/admin/utlrp
shutdown immediate
exit
cd /d01/oracle/10.1.8/sesdev/cpu/view_recompile/
sqlplus "sys/XXXXXXX" as sysdba;
startup upgrade;
@view_recompile_jan2008cpu.sql
@?/rdbms/admin/utlrp
shutdown immediate
cd /d01/oracle/10.1.8/sesdev/jdk/jre/lib/ext
mv mail.jar $HOME/mail.jar.backup02222010
mv mailapi.jar $HOME/mailapi.jar.back02222010
cp /d01/oracle/10.1.8/sesdev/search/lib/mail.jar .
SES 10.1.8.4 is now installed and updated with latest available CPU
tried logging in to admin console at http://aussearchdev:7777/search/admin - worked fine
tried bringing up search query at http://aussearchdev:7777/search/query/search - worked fine
we're going to go with the standalone OC4j 10.1.3.3 and Oracle ADF 10.1.3.3 method
The URLs for these products are
http://blogs.oracle.com/ebssearch/2009/10/available_now_oracle_search_modeler_11_for_oracle_e-business_suite_11i.html
and specifically
OC4J - http://download.oracle.com/otn/java/oc4j/101330/oc4j_extended_101330.zip
ADF - http://www.oracle.com/technology/software/products/jdev/htdocs/adfinstaller10133.html
OC4J install
First you need to have Java 1.5 on the machine. Latest is 1.5.0_22. Package is in /mnt/oraclebackup/deathstar_patches/SES
as root on aussearchdev
cd /usr/local
cp /mnt/oraclebackup/deathstar_patches/SES/jdk-1_5_0_22-linux-i586.bin .
chmod 700 jdk-1_5_0_22-linux-i586.bin
./jdk-1_5_0_22-linux-i586.bin
yes
install OC4J just by copying over the directory
as oracle on aussearchdev
mkdir -p /d01/oracle/oc4j
cd /d01/oracle/oc4j
cp -r /mnt/oraclebackup/deathstar_patches/SES/oc4j/* .
ADF install
vi /mnt/oraclebackup/deathstar_patches/SES/adf/adfinstaller.properties
change the following
OracleHome = /mnt/oraclebackup/deathstar_patches/SES/adf
DesHome = /d01/oracle/oc4j/
type = OC4J
as root
cd /usr/bin
rm java
(yes)
ln -s /usr/local/jdk1.5.0_22/bin/java
su - oracle
java -version should now return 1.5.0_22
export JAVA_HOME=/usr/local/jdk1.5.0_22
cd /mnt/oraclebackup/deathstar_patches/SES/adf
java -jar runinstaller.jar -version
returns The version for the ADF libraries being installed is 10.1.3.41.57 - yes, that is apparently 10.1.3.3.
java -jar runinstaller.jar adfinstaller.properties
output looks good, do not be concerned by
WARNING: 'Could not delete: /d01/oracle/oc4j/BC4J/redist/bc4j' whilst deleting bc4j application
WARNING: 'Could not delete: /d01/oracle/oc4j/BC4J/redist/datatags' whilst deleting datatags application
as it was trying to delete the old version that didn't exist
Start OC4J
as oracle on aussearchdev
export JAVA_HOME=/usr/local/jdk1.5.0_22
export ORACLE_HOME=/d01/oracle/oc4j
cd $ORACLE_HOME/bin
./oc4j -start
you will be prompted for password - we're setting it. use XXXXXXXXXX
after it's up, kill it (ctrl-c) and restart it with
nohup ./oc4j -start &
last lines in nohup.out is
Starting OC4J from /d01/oracle/oc4j/j2ee/home ...
10/02/23 03:22:38 Oracle Containers for J2EE 10g (10.1.3.3.0) initialized
So now on to search modeler installation, going by Installation steps in Note 781366.1
8326128 - This is not a patch to be applied to the Apps, keep reading
as oracle on aussearchdev
cd /mnt/oraclebackup/deathstar_patches/SES/8326128
mkdir -p /d01/oracle/oc4j/uploaded
vi build.properties, changing
installation.type=OC4J
oracle.home=/d01/oracle/oc4j
deploy.server=aussearchdev.domainname.com
deploy.port=23791
web.port=7777
password=XXXXXXXXX
extra.classpath=/d01/oracle/oc4j/uploaded
now set the following environment values in your ssh session
export ORACLE_HOME=/d01/oracle/oc4j
export JAVA_HOME=/usr/local/jdk1.5.0_22
export PATH=$ORACLE_HOME/ant/bin:$ORACLE_HOME/bin:$PATH
ant main
whole bunch of stuff to screen, errors due to undeploy something that doesn't exist. Finished after a minute with
BUILD SUCCESSFUL
Total time: 58 seconds
Now on to post install steps
restart OC4j
cd $ORACLE_HOME/bin
./modeler.sh -shutdown -port 23791 -password r*l*r*0*
export ORACLE_HOME=/d01/oracle/oc4j
export JAVA_HOME=/usr/local/jdk1.5.0_22
export PATH=$ORACLE_HOME/ant/bin:$ORACLE_HOME/bin:$PATH
nohup ./modeler.sh -start &
end of nohup.out should show
Starting OC4J from /d01/oracle/oc4j/j2ee/home ...
Try going to http://aussearchdev:8888/modeler/faces/ModelerHome.jsp
Should get login screen, but wait, we haven't installed Oracle Apps interface yet...
Next let's do the Apps side of things
Going by note 953378.1
Using ERNIE (a development instance of E-Business Suite running 11.5.10.2 ATG RUP 7)
as applmgr on ausernieapp (ausernieapp is our app tier)
shut down apps services
apps patch 8225631
verify all the pre-req patches are in ERNIE
select * from ad_bugs where bug_number = '5903765';
select * from ad_bugs where bug_number = '6372396';
select * from ad_bugs where bug_number = '3219567';
select * from ad_bugs where bug_number = '3264822';
select * from ad_bugs where bug_number = '3261254';
select * from ad_bugs where bug_number = '5161676';
select * from ad_bugs where bug_number = '3036401';
select * from ad_bugs where bug_number = '3263588';
select * from ad_bugs where bug_number = '3264818';
select * from ad_bugs where bug_number = '3218526';
select * from ad_bugs where bug_number = '3263645';
select * from ad_bugs where bug_number = '4206794';
select * from ad_bugs where bug_number = '3262486';
select * from ad_bugs where bug_number = '3261243';
select * from ad_bugs where bug_number = '2614213';
select * from ad_bugs where bug_number = '3262159';
select * from ad_bugs where bug_number = '2819091';
select * from ad_bugs where bug_number = '3412795';
patch went in smooth
Log in to ERNIE Apps GUI as sysadmin user responsibility
Give users such as sysadmin FND Search Crawler responsibility
Go to system profile options, set
set FND: Search Enabling Flag to Y at site level
as applmgr on ausernieapp
cd /d01/oracle/ernieappl/fnd/11.5.0/patch/115/sql
sqlplus apps/$APPS_PWD @AFSRCHCF
Enter SES endpoint URL [e.g. http://ap637atg.us.oracle.com:7780]: http://aussearchdev.domainname.com:7777
Enter Apps Admin username [e.g. sysadmin]: sysadmin
Enter Apps Admin password: sysadmin_password
Enter SES Admin username [e.g. eqsys]: eqsys
Enter SES Admin password: eqsyspassword <-- This is the same as sys's password
on aussearchdev as oracle
had to kill modeler and start all the processes, so
kill -9 the modeler oc4j process, then
cd $ORACLE_HOME/bin
./searchctl startall
enter the password when prompted
in IE browser go to
http://aussearchdev.domainname.com:7777/search/admin
log in with eqsys password
global settings tab
identity management setup
click circle next to oracle.search.plugin.security.identity.ebs.EBS12IdentityPliginMgr
(yes, we're going with 12 even though we use Oracle Apps 11i)
http end point https://ausernieapp.domainname.com:8443/webservices/AppSearch/SecurityService
username sysadmin
password XXXXXXX
finish
Global Settings
Federation Trusted Entitites
####entity name sysadmin
####Entity Password XXXXXXXX
According to web conference with Oracle, this should NOT be eqsys but instead be sysadmin from above.
Select the Use Entity Plug-in for authentication check box
add
Trying to go to http://aussearchdev.domainname.com:7777/search/query/search and login (sysadmin / password)
stop midtier on both SES and Apps
cd $ORACLE_HOME/bin
./searchctl stopall
./adstpall.sh apps/$APPS_PWD on EBS app tier
start midtier on both SES and Apps
cd $ORACLE_HOME/bin
./searchctl startall
./adstrtal.sh apps/$APPS_PWD on EBS app tier
Now try and log in to Oracle SES user interface to verify the configuration
http://aussearchdev.domainname.com:7777/search/query
Now start up modeler again
export JAVA_HOME=/usr/local/jdk1.5.0_22
export ORACLE_HOME=/d01/oracle/oc4j
export PATH=$ORACLE_HOME/bin:$PATH
cd $ORACLE_HOME/bin
nohup ./modeler.sh -start &
Works now.
Now go to http://aussearchdev.domainname.com:8888/modeleradmin/AdminHome.jsp log in as oc4jadmin/XXXXXXX
Configure new target
Target Type 11i
Description ERNIE
Name ERNIE
EBS Database Host Name auserniedb
EBS Database Port 1521
EBS Database SID ERNIE
username apps
password XXXXXXXXx
oc4jadmin XXXXXXXx
export JAVA_HOME=/usr/local/jdk1.5.0_22
export ORACLE_HOME=/d01/oracle/oc4j
export PATH=$ORACLE_HOME/bin:$PATH
cd $ORACLE_HOME/j2ee/home
java -jar admin_client.jar deployer:oc4j:aussearchdev oc4jadmin XXXXXXXXX -addDataSourceConnectionPool -name "ERNIE2-pool" -factoryClass "oracle.jdbc.pool.OracleDataSource" -dbUser "apps" -dbPassword "XXXXXXX" -url "jdbc:oracle:thin:@auserniedb.domainname.com:1521:ERNIE" -applicationName appsearch
java -jar admin_client.jar deployer:oc4j:aussearchdev oc4jadmin XXXXXXX -addManagedDataSource -name "ERNIEDS" -jndiLocation "jdbc/ERNIEDS" -connectionPoolName "ERNIE2-pool" -applicationName appsearch
http://aussearchdev.domainname.com:8888/modeler/faces/ModelerHome.jsp
So, creating a self signed SSL certificate for ERNIE EBS instance (this will not work if you use an SSL certificate for another server like say, PROD)
doing this on ausernieapp
openssl genrsa -des3 -out ausernieapp.key 1024
PEM key is ausernieapp
openssl req -new -key ausernieapp.key -out ausernieapp.csr
PEM key is ausernieapp
Country US
State Texas
Locality Austin
Organization Name Corporation
Organizational Unit Name Information Technology
Common Name ausernieapp.domainname.com
Email address [email protected]
No challenge password
No optional company name
Now let's remove the passphrase from the key
cp ausernieapp.key ausernieapp.key.orig
openssl rsa -in ausernieapp.key.orig -out ausernieapp.key
Now let's generate a self-signed certificate
openssl x509 -req -days 1000 -in ausernieapp.csr -signkey ausernieapp.key -out ausernieapp.crt
Install the private key and certificate
cd $IAS_ORACLE_HOME/Apache/Apache/conf/ssl.crt
cp server.crt server.crt.backup.03102010
chown applmgr:applmgr server.crt.backup.03102010
cp $HOME/ausernieapp.crt /d01/oracle/ernieora/new/iAS/Apache/Apache/conf/ssl.crt/server.crt
cd $IAS_ORACLE_HOME/Apache/Apache/conf/ssl.key/
cp server.key server.key.backup.03102010
cp $HOME/ausernieapp.key /d01/oracle/ernieora/new/iAS/Apache/Apache/conf/ssl.key/server.key
chown applmgr:applmgr server.key.backup.03102010
bounce apache as applmgr
cd /d01/oracle/erniecomn/admin/scripts/ERNIE_ausernieapp
./adapcctl.sh stop
./adapcctl.sh start
In IE
https://ausernieapp.domainname.com:8443
Continue
Click on Certificate Error next to URL bar
Install Certificate -> Next-> Place all certificates in the following store -> trusted root certificate authorities ->finish
close browser, back to https://ausernieapp.domainname.com:8443
no errors,
Next step will be to import key into the SES and Search modelers
as oracle on aussearchdev
cd /d01/oracle/10.1.8/sesdev/jdk/jre/lib/security/
cp cacerts cacerts.backup.03102010
scp root@ausernieapp:/root/ausernieapp.crt .
export LANG=c
export PATH=$ORACLE_HOME/jdk/bin:$PATH
keytool -keystore ./cacerts -storepass changeit -alias rootausernieapp -import -trustcacerts -file ausernieapp.crt
--output
Owner: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Issuer: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Serial number: b4e92089cf73076f
Valid from: Wed Mar 10 13:22:38 CST 2010 until: Tue Dec 04 13:22:38 CST 2012
Certificate fingerprints:
MD5: 2C:6B:EE:1A:63:6D:XX:A6:05:90:F6:XX:DD:88:F7:80
SHA1: F8:DC:E5:2A:3E:68:XX:E1:EA:E4:75:AE:CC:4F:4A:10:2F:8A:FE:9B
Trust this certificate? [no]: yes
Certificate was added to keystore
Now load our cert
keytool -keystore ./cacerts -import -trustcacerts -file ausernieapp.crt
keytool -list -v -keystore ./cacerts now shows
Alias name: rootausernieapp
Creation date: Mar 10, 2010
Entry type: trustedCertEntry
Owner: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Issuer: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Serial number: b4e92089cf73076f
Valid from: Wed Mar 10 13:22:38 CST 2010 until: Tue Dec 04 13:22:38 CST 2012
Certificate fingerprints:
MD5: 2C:6B:EE:1A:63:6D:CB:XX:05:90:F6:78:DD:88:F7:80
SHA1: F8:DC:E5:2A:3E:68:9C:CE:EA:4E:75:AE:CC:FA:9E:10:2F:8A:FE:9B
Now we need to load it into the search modeler keystore
as root on aussearchdev
export JAVA_HOME=/usr/local/jdk1.5.0_22/
export PATH=$JAVA_HOME/bin:$PATH
cd /usr/local/jdk1.5.0_22/jre/lib/security/
scp root@ausernieapp:/root/ausernieapp.crt .
output
keytool -keystore ./cacerts -import -trustcacerts -file ausernieapp.crt
Enter keystore password: changeit
Owner: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Issuer: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Serial number: b4e92089cf73076f
Valid from: Wed Mar 10 13:22:38 CST 2010 until: Tue Dec 04 13:22:38 CST 2012
Certificate fingerprints:
MD5: 2C:6B:EE:1A:63:6D:CB:A1:05:90:F6:78:DD:88:F7:80
SHA1: F8:DC:E5:2A:3E:68:9C:CE:EA:4E:75:AE:CC:4F:9E:10:2F:8A:FE:9B
Trust this certificate? [no]: yes
Certificate was added to keystore
[root@aussearchdev security]#
output
For troubleshooting, if you go to end of /d01/oracle/10.1.8/sesdev/search/data/config/crawler.dat
you can modify the logLevel from the default of 4 to 2 to get better debug data. No services need to be restarted, it will become active with the next crawl.
While talking with Oracle, they mentioned the following patches
The patches identified 8321527 and 7586924 are SES patches to help with indexing
They also identified patch 9103851 which is an apps patch dealing with responsibilities <-- This is not yet available
Applying patch 7586924
as oracle on aussearchdev
cd $ORACLE_HOME/bin
./searchctl stopall
cd /mnt/oraclebackup/deathstar_patches/SES/post_patches/7586924
opatch apply
cd $ORACLE_HOME/bin
./searchctl startall
sqlplus eqsys/XXXXXX@SESDEV
define SCH_NAME=EQSYS
define PROXY_USER=EQPROXY
define INST_USER=EQ_TEST
@$ORACLE_HOME/search/admin/eq0pkh.sql
@$ORACLE_HOME/search/admin/eq0plb.sql
@$ORACLE_HOME/search/admin/eq0bug_7586924.sql
cd $ORACLE_HOME/search/data/config/
cp crawler.dat crawler.dat.backup.03102010
vi crawler.dat
We're using the Oracle E-Business Suite R12 crawler, so we will add the line
USE_IN_MEMORY_QUEUE Oracle E-Business Suite R12
as the line immediately preceding IMPORT -
so the end of the file looks like this:
# system properies: separated by space for multiple system properties or define multiple SYSTEM_PROPERTIES
# logLevel values: DEBUG(2), INFO(4), WARN(6), ERROR(8), FATAL(10)
SYSTEM_PROPERTIES -Doracle.search.logLevel=4 -Doracle.search.log=oracle.search.util.Log4jImpl
USE_IN_MEMORY_QUEUE Oracle E-Business Suite R12
IMPORT -
Now on to patch 8321527
cd /mnt/oraclebackup/deathstar_patches/SES/post_patches/8321527
cd $ORACLE_HOME/bin
./searchctl stopall
cd -
opatch apply
cd $ORACLE_HOME/bin
./searchctl startall
sqlplus eqsys/XXXXXXX@SESDEV
define SCH_NAME=EQSYS
define PROXY_USER=EQPROXY
select object_name from user_objects where status = 'INVALID';
--should be no rows selected
@$ORACLE_HOME/search/admin/eq0pkh.sql
@$ORACLE_HOME/search/admin/eq0plb.sql
--should be no rows selected
restart SES
cd -
./searchctl stopall
./searchctl startall -
[1.1.2.25.79] Program hangs after starting long runnin SQL with parameters
Hello Forum,
I'm currently tuning some SQLs with parameters that run some minutes. When I enter the SQL in the worksheet and press F9, SQL Developer asks for the parameters. But after clicking "Apply" (or whatever it is called in the english version, I'm using german ;-)
I get the elapsed time of 0.018 seconds displayed and the whole program hangs until the SQL is completed. The elapsed time is not updated so I don't get the real elapsed time.
I run SQL Developer against an Oracle 9.2 Database on Win2k. The client runs WinXP.
I hope this is not a double post but searching the forum for "parameters" gave too many hits to check. ;-)
Regards,
dhalekSqldev hangs when issuing an action that requires the previous action to be completed first.
Sqldev could open a new connection for this, or at least display a message telling the action isn't possible until the previous one completes, instead of just hanging. Vote for the requests for this on the SQL Developer Exchange if you want this getting addressed sooner.
Thanks,
K. -
Adgrants.sql O/S permission denied
HI All,
after applying patch 5989593 - AD: 11i: Remove "REVOKE ALL FROM PUBLIC" from ADGRANTS.SQL
Running adgrants.sql gives
SQL>@adgrants.sql
O/S Message: Permission denied
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.8.0 - Production
Please suggest
Rgds,
SKHi,
Arnoud -
the ownership/permissions on adgrants.sql are the same
-rwxr-xr-x 1 oradev dba 21648 Jan 01 2002 adgrants.sql
Fadi -
i ran the script as mentioned
sqlplus "/as sysdba"
@adgrants.sql APPLSYS
i am still getting the same error
SQL> @adgrants.sql APPLSYS
O/S Message: Permission denied
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.8.0 - Production
Please suggest.
Rgds,
SK -
I am having trouble with app updates on my iOS 5 iPhone never getting beyond the "waiting" state.
I am having trouble with app updates on my iOS 5 iPhone never getting beyond the "waiting" state. I have tried signing out/in of my account, rebooting and removing/re-installing the apps. This started shortly after going to iOS 5 but I am not certain if that is related. All updates that I try now are stuck in "waiting". I also tried removing the apps and then installing via iTunes desktop sync with no improvement. The only thing that I have not tried so far is a restore to a prior iPhone backup. I have not been able to find anything to indciate what the updates on waiting on. There is plenty of space on the iPhone (16gb available). Any suggestions on what to try next?
Hello there, Missy.
First thing I would recommend is to check your downloads queue to make sure there is not an interrupted download per the following Knowledge Base article:
iTunes: How to resume interrupted iTunes Store downloads
http://support.apple.com/kb/HT1725
If your download was interrupted using your iPhone, iPad, or iPod touch
1. From the Home screen, tap the iTunes app.
2. For iPhone or iPod touch, tap More > Downloads. For iPad, tap Downloads.
3. Enter your account name and password if prompted.
4. Tap the blue download arrow to resume.
If you can't complete the download on your iOS device, you can download it in iTunes on your Mac or PC and then sync it to your iOS device. You can also transfer purchases from your iPhone, iPad, or iPod to a computer.
For Apps, you can also try tapping on the application icon to resume the download, as outline in this featured discussion:
App updates won't download on my...: Apple Support Communities
https://discussions.apple.com/thread/4111336
Try tapping the App, so that it changes to Paused instead of Waiting, then tap it again to resume the install.
Make sure you don't have any paused downloads in other apps either, like the App Store or iTunes Store.
If that doesn't do it, try resetting or restoring the iPhone.
via whatheck
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Forgot to run adgrants.sql, as a part of EBS upgrade from 12.1.1 to 12.1.3
We are in phase of upgrading our application from 12.0.4 to 12.1.3. Here we have successfully upgraded to 12.1.1.
While before the next maintenance patch 9239090 (12.1.1 to 12.1.3), our DBA has forgotten to run adgrants.sql (a Pre-Req Step).
Patch is running for almost 7 hours.
Can someone please tell what will be the impact of not running adgrants.sql?? Can there be any chance taht because of the script patch will not be completed??
Please reply soon.
Thanks:
Prateek Jain
Edited by: 982817 on Jan 18, 2013 11:54 AMHi Hussein,
I'm a little confused and don't know what to do.
I have two backups. Before and after installing patch R12.AD.B.DELTA.3 (patch 9239089).
Is this a good starting point:
I installed the patch R12.AD.B.DELTA.3 (patch 9239089) and everything is working fine.
Now in DOC 1080973.1 I see that I am at at step 2 now: "Use AutoPatch to apply Oracle E-Business Suite Release 12.1.3 Patch 9239090 and follow the instructions in the patch readme file."
Should I do that or do I need to run an other patch first?
Thanks in advance. -
Receipt Reconciliation Fails With APP-AR-999967188
Hi,
I am facing the below error while reconciling my remittance batch with the bank statement.
Receipt Reconciliation Fails With APP-AR-999967188 The Receipt is in the Process Of Funds Capture Settlement.
As per Oracle metalink note we applied the Patch 10389524:R12.AR.B
But still we are not able to reconcile the existing bank statement line with the remittance batch.
Please advise how resolve this issue.
Regards,
Sivakumaruser9312135 wrote:
Hi,
I am facing the below error while reconciling my remittance batch with the bank statement.
Receipt Reconciliation Fails With APP-AR-999967188 The Receipt is in the Process Of Funds Capture Settlement.
As per Oracle metalink note we applied the Patch 10389524:R12.AR.B
But still we are not able to reconcile the existing bank statement line with the remittance batch.
Please advise how resolve this issue.
Regards,
SivakumarPlease see these docs.
Receipt Reconciliation Fails With APP-AR-999967188 The Receipt is in the Process Of Funds Capture Settlement [ID 1283597.1]
Upgrade issue: APP-AR-999967188 Receipt Number Is In Process Of Funds Capture Settlement (Paypal) [ID 1402665.1]
Thanks,
Hussein -
Hello All,
I have just started learning PL/SQL and this my first R&D stuff with PL/SQL :)
I have a very basic beginner question.
Suppose I want to insert 1 lakh rows in a table through Perl. One and easiest way to do is to prepare and execute insert queries using Perl module - 'DBI' module in a loop
But I guess this will send lot of traffic over the LAN. What I rather feel is that if I execute these 1 lakh SQL queries using PL/SQL it will be comparatively more network efficient and fast.
So I have following questions:
1. Is it possible to integrate PL/SQL with Perl using 'DBI' module
2. Is there a way in PL/SQL that it will return status of all the 1 Lakh SQL queries after execution that will let me know which SQL queries were successfully executed and which failed.1. Is it possible to integrate PL/SQL with Perl using 'DBI' moduleyes, just use a PL/SQL statement instead of a sql one
2. Is there a way in PL/SQL that it will return status of all the 1 Lakh SQL queries after execution that will let me know which SQL queries were successfully executed and which failed.yes, you have to manage an exception block for each row and store the single row result in a cumulative variable:
The following code is an incomplete and not testet example:
my $STM = "
declare
ret varchar2(10);
begin
begin
insert into mytab values(1);
ret := ret||'0';
exception
when others then
ret:=ret||'1';
end;
begin
insert into mytab values(2);
ret := ret||'0';
exception
when others then
ret:=ret||'1';
end;
... and so on ...
select ret into :OUTRES from dual;
end;";
my $outres;
my $hnd = $db->prepare($STM);
$hnd->bind_param_inout( ":OUTRES", \$outres, 10); -- 10 is the variable length, e.g. the number of inserts
$hnd->execute();
print "inserts output: $outres\n";At the end of the script you should hava a string of bits. A 0 for each successful insert an 1 for each unsuccessful...
Max
[My Italian Oracle blog|http://oracleitalia.wordpress.com/2010/01/10/crittografia-in-plsql-utilizzando-dbms_crypto/] -
I had created a form on table with report. When the user clicks on the link image on the report, it query up the data on the form. It does all of the DML on the form behind the scenes. Now I have to do the same thing, but the form needs to be based on SQL Query instead. What do I have to do to have the link from the report automatically call of the data in the form?
The easiest way is to create a view with an INSTEAD OF trigger which does the insert/update/delete into the underlaying tables.
That will allow you to use all the processes the wizard creates for you and without having to write any code in APEX.
Patrick
My APEX Blog: http://www.inside-oracle-apex.com
The ApexLib Framework: http://apexlib.sourceforge.net
The APEX Builder Plugin: http://apexplugin.sourceforge.net/ New! -
WAD: Applying Filters Once with Filter Panes or Dropdowns
Hi
We have Dashboards created using BI7 version on Web App Designer. We are currently using Dropdowns to filter on several characteristics.
We are considering changing our dropdowns to use a Filter Pane Web Item. But are looking for an option where we can select multiple filters before they get applied so that the app does not apply one filter at a time.
Is this possible with either the Filter Pane Web Item or Dropdown Web Item? Would prefer the Filter Pane Web Item solution.
Thanks
KristenHi.
Yes, a filter pane will allow you to set values for multiple characteristics and then hit a button to refresh. You need to UNcheck the "automatic apply" in the properties. The pane will then have the button to update.
See this on [filter panes|http://help.sap.com/saphelp_nw70/helpdata/en/85/08e241aa8e9d39e10000000a155106/content.htm].
br
Jacob
P.S: mmhhh... and in the link it says "this parameter is not currently supported"
Well, you can do this in a workaround way:
you can use dummy data providers for the dropdown menus, so the system still updates the dataprovider, but because it's not used in your web template for anything else than this, nothing changes in the template. Once you have set all of the dropdowns, you can set a button up to pass the values from these dummy DP's to the "real" ones, to make the content of the template change.
You are able to control the performance of these dummy providers, by keeping the number of records low (aggregates or separate datamarts), so it works, but because you still actually refresh with each change, it's not really a "smooth" feeling...
Edited by: Jacob Jansen on Jan 27, 2010 6:45 PM -
Just got back into the Curve from a WM phone and I forgot how easy this phone is to use!!! Having a problem with App world though. I;m receiving an error message stating I'm unable to connect to the server. Anyone have any suggestions on how to rectify the problem? I'm sure it's a super easy fix and I'm just missing it online somewhere. Thanks!
Here's a few steps I've recommended that have worked for some...
There have been some issues with the AppWorld services lately...most are reported to be cleared up. Please try again. Also, please try removing and re-installing AppWorld...some have reported that to be helpful. In addition...RIM has released AppWorld version 1.1.0.15...it is highly recommended to be on that version.
Also please try a hard reset: With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
In addition, you can try this sequence:
1) Remove AppWorld from your BB (Homescreen > Options > Advanced Options > Applications) -- if it requests that you reboot the BB, do so.
2) Do a Batt-Pull reboot as described above.
3) Get a new link and install a fresh copy of AppWorld
http://na.blackberry.com/eng/services/appworld/download.jsp#tab_tab_download
Again, if it requests to reboot, do so.
4) Do another Batt-Pull reboot
5) See if it now works.
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
i have an iPad with apps and data already on it i just bought a mac how do i transfer the data from i pad to mac
here
1) Without connecting your iPad to your laptop, start iTunes. Click on Edit. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
2) connect your iPad to your laptop and start iTunes.
3) When iTunes starts, right click on your iPad under Devices in the left column. Select Transfer purchases etc.
4) After it finishes transferring all your apps to your new laptop, right click on your iPad and select Backup your iPad.
5) After it finish backing up your iPad, right click on your iPad and select Restore etc.
6) After it finishes restoring, left click on your iPad , then click on the Apps tab on top, and check the box next to Sync Apps, then click on Apply below.
If everything on your iPad looks good after the sync, go back and click on Edit / Preferences / Devices and UN-check the box next to Prevent your iPod etc. The only other thing you may want to check is if your contacts, bookmarks, etc. are syncing correctly now. If not, go to the Info tab after connecting and make sure you indicate which features you want to sync with what sources. -
Generate ANSI SQL with Oracle IKM
Is it possible for ODI to generate ANSI SQL with the Oracle IKM?
I have used ANSI joins in a filter in an interface, now when I run the interface I get the error: ORA-25156: old style outer join (+) cannot be used with ANSI joins.
I would prefer to use ANSI joins in my filters instead of the old style (+) syntax. Is this possible?Sure,
Go to topology, edit your Oracle technology , on SQL tab change it over to ordered joins - clause location - From , you can specify the keywords left join, right join, full outer join etc to get rid of your '(+)'
Maybe you are looking for
-
It seems like I cannot get GPS only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off). Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX, garmin blu
-
hi abaprs, i have displayed my alv in container using cl_gui_alv_grid->set_table_for_first_display, now i have 'edit' button on my screen, i want to make certaion fields of a raw selected by user to editable mode when user push that button, i have go
-
Is there a way to turn off the list view when making a pdf protfolio. I don't want the end user to see the file list.
-
What does Single-App plan for Creative Cloud include?
I've just completed my first year with Creative Cloud, paying for the introductory subscription. The only App I ever use is Photoshop. If I move to a Single-App plan do I still get to use TypeKit inclusively with my subscription? Thanks Matt
-
Sorry, but this ichat thing is not intuitive, and Ralph's FAQ tips is incomplete (at bottom of page it appears to end in the middle of a sentence). I haven't yet wanted to pay for a .mac account, and I don't like the idea of downloading AIM software