I bought a Samson R10S microphone to use in garageband on my imac, and i can't seem to get it to record through the microphone, help?
Need help recording on Garageband with a mic I bought.
How are you connecting the mic to your iMac?
Is it a USB microphone or does it need an audio port? The newer iMacs don't have a line-in port, so you'll need an audio interface to turn a USB port into an audio port, eg., the iMic as the most simple solution:
See: Recording with iMic in GarageBand
Similar Messages
-
I'm just setting up my iMac, and am not very familiar as I'm just coming over from Windows. Working on setting up my recordeing software (will most likely be Audition) and I need to be able to record from the internet as well as from a microphone.
I've installed soundflower but now the micropohone is not working in facetime. What is the proper way to set all this up?
Thank you!
FrankO.K. fgonoz98
I would do 1 thing at a time:"now the micropohone is not working in facetime"
Here is what you can check to get your mike working in facetime:
1. Hold down option while you click on the speaker next to time a. date,
under input Device see if your mic is marked. If not: ✔️
2. Click the apple top left/System Prefs./click on the Sound speaker:
under Input highlight microphone.
3. When you have factime on go to video above scroll and see if your mic is marked ✔️
If that does not get it to work there is more you can check:
(Utilities/Audio, midi setup)
For any other audio device you do this for input and output.
If you get stock post back -
I'm using iMovie to prepare a short holiday video. Snap to beat markers worked great for the first song but doesn't seem to work when I try to extend my project with a second song and more video and stills. I dragged in the song and marked the beats but when I bring in stils and video clips they just ignore the beat markers. Can anyone help please. Thanks.
I am having the same issue. The first song and beat markers work great. I add a second song and set beat markers. When I add photos, the appear at random spots with random lengths. I haven't seen a pattern yet. Spent 30 minutes on this topic at my last 1:1 session in the store. No luck figuring it out.
One work-around might be to create one song per project (so beat markers work), then combine the two (or more) projects. But I'm not sure if that's possible or how to do it.
Thanks for any help on this. -
I just bought my first MacBook Pro a few days ago. I can't seem to get my PC to see my MacBook Pro on the network. Can anyone help me get my PC to see my MacBook Pro on my network t?
Thanks,
AlexForgot Your Account Password
For Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu.
Enter resetpassword at the prompt and press RETURN. Follow
instructions in the dialog window that will appear.
Or see Reset a Mac OS X 10.7 Lion Password and
OS X Lion- Apple ID can be used to reset your user account password. -
Well I was using my iphone 5, When restart and it did not turn on gets stuck in the presentation of apple (the apple) and at the top left of the screen above the apple logo reincia Appears this text, down and then turns back on and i get the same error , i try to restore with itunes restore mode and throws me error!, could anyone help? I'm going crazy!. Thank you!
This is the mistake That I get up the logo and then reboots iphone and Continues to Appear;
(NAND) _findflashmediaandkeepout: 601 physical nand block offset 1
(NAND) start: 356 this 0x96959400 PROVIDER = 0x96b1de80 falshmedia = 0x96b1de80
(NAND) WMR_Start: 149 apple PNN NAND Driver, Read / Write
(NAND) WMR_Start: 174 FIL_INT (OK)
(NAND) WMR_open :371 vfl_open (ok)
(NAND) s_cxt_boot:88 sftl: error, unclean shutdown; adopted 7775 spans
(NAND) WMR_open:420 FTL_open (ok)
(NAND)_publishServices:642 FTL capabilities: 0x00000001
(NAND)_ppnvflGetStruct:3469 checking borrowed blocks-count:23 max_count:23
(NAND)_fetchBorrowedList:881 number of borrowed blocks 16Hi Guys!
I'm German, so my english writing might not be perfect
I had the same Issue on a 5 i bought. Exact same screen and writing. Battery was totally drawn, first thing I had to replace. The screen had been replaced and since then it wouldn't work anymore according to the previous owner.
It took me a couple hours, after recieving a few errors like 4013 it just never completed the restore, got really hot as well. The Flexwire of the Dock Connector seemed damaged, replaced the dock, but that didn't help.
I almost gave up, thought the Logic Board was bad.
BUT! Then i deceided to check if it has anything to do with the Screen assembly, and it did.
Long story short, on mine the front facing camera, and sensor assy were bad.
Anyhow, the phone works ''perfect'' when i leave them unplugged. So I just ordered a new one and we will see if thats the problem or if the damage is in the Logic Board.
If so, i can live without the sensor and front cam.
Just wanted to share, good luck everyone. -
Can time capsule be used to back up an imac and macbook?
I use time capsule with my imac and I have recently bought a macbook. Can I add the macbook to the time capsule so that both devises are backed up on it?
Many thanks
GYes, that is fine. .the two devices automatically setup different backup sparsebundles.. a disk image in effect.
-
My new LaCie external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive.
The same thing happened recently between Final Cut Express and my other LaCie external hard drive used as the Scratch disk. It fixed itself.
I've run out of ideas. Help would be very much appreciated. Thanks.have you done some searches on FCPx and time machine? Is there a known issue with using a TM drive with FCPx? dunno but ...wait...I'll take 60 sec for you cause I'm just that kind of guy.... google...." fcpx time machine problem" Frist page link
http://www.premiumbeat.com/blog/fcpx-bug-best-practices-for-using-external-hard- drives-and-final-cut-pro-x/
You cannot have time machine backups on your hard drive if you intend to use it in FCPX.
booya! -
I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 problem
i try to download now, do you think when i download and install the windows support software, can i fix the problem?
-
I have a problem with Safari in IOS 8 on my iPad 3. The bookmarks take up a third of the screen and I can't seem to make the bookmarks disappear until I need them. The useful part of the screen is therefore very small. Any suggestions gratefully appreciated.
OK, it now sort of works. A couple of problems here:
After updating IOS, Safari iCloud was "automatically" switched off
Switching it on had no effect
resetting my iPad automatically switched off safari iCloud again
after switching it back on, it said "turning off safari data"
switched it off and on again, now it said : "turning on safari data" and the sync worked
On IOS 7 no problems
The bookmarks not being displayed was because after pressing the book icon, it defaulted to showing the history and I had to press "Back" to get to the other options -
I am using an iPad and iPhone and have exchange as my email. Both will only collect mails when I am in the wifi of the office, and not when I am out and about. I can't seem to get a fix for it.
This - https://support.mozilla.org/en-US/kb/how-make-web-links-open-firefox-default - didn't work?
-
I can't seem to get my iMac (late 2009 model) into automatic sleep mode. If I manually put it into sleep I don't have any issues.
I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion. I now want to fix the underlying problem.
I'm not running any weird background processes and in my energy saver settings I've tagged "put the hard disk to sleep when possible:, "allow power button to put computer to sleep" and "automatically reduce brigthness". All pretty standard.
Is there anyone who can give me some pointers ?Today I solved the same problem for my iMac running Snow Leopard. See https://discussions.apple.com/thread/3008791#15947706. The method may help you, too.
For me it was the DynDNS Updater preventing my iMac from automatically entering sleep mode.
To my knowledge the cause of this sleep problem can only be a peripheral device or a process. So I suggest to first unplug all peripherals and test whether that's the cause. If not, I suggest to terminate one process after another and to test automatic entering of sleep mode after each. Start with user processes; continue with system process if necessary.
At least that's the way I found the offending process. Fortunately, I was able to change the configuration of that process to allow again automatic entering of sleep mode.
Good luck! -
Hello, I just bought a Snow Leopard and I have tried to install this on my macbook pro 2008 (10.5.8) and I can not do it. I have to erase the hard drive before in order to succeed. Please tell me step by step what to do. I appreciate very much your help.
ThanksHere are the directions:
http://support.apple.com/kb/HT3910?viewlocale=en_US
Ciao. -
I can't seem to get my iPod touch (4th Gen) to play photo slideshows or videos through my TV. Is this a design flaw? Or is it me? My old iPod used to do it no problem, but now I can't even find any video out options in the settings.
This cable And Im using a cable that has a headphone jack on one end and RCA cables on the other. does not work for iPod touches. See:
http://support.apple.com/kb/HT1454 -
I am having trouble, my icloud is using an old Apple ID, and i can no longer access that email account, or know the password to that, how do i switch it to my new Apple ID?
Having the email address is not necessary. It is just the username for the device. All you need is that Apple ID and password. Now, if you forgotten the password, then you have more work to do. Since that email is no longer active, you would need to send the reset to your rescue email, if you remember that. Or you will need to contact Apple Security for help. Apple ID: Contacting Apple for help with Apple ID account security
-
I bought a season of shows and i can't seem to watch some. It wont let me on my computer or Ipad.It will only let me wath like 30 seconds of it.
You need to place your iPod in recovery mode and then restore the iPod via iTunes on your computer. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
Maybe you are looking for
-
AR Invoice with Installment Payment Terms
Hi to All, We have an invoice where the payment terms are based on installment. The installment is for 18 months. Automatic cash receipts have been applied correctly for Installment 1 and Installment. Our situation is this where we want to apply an
-
Where do we write statements?
I am new to XMLP. What is the prerequisite knowledge to build a report in XMLP? I don't know anything about XML. Do we need XML knowledge? Because when I read user guide or some articles I get confused with the terminology. I am building Pick and PO
-
Until recently my iTunes has been able to burn CDs without any problems. However, now whenever I attempt to burn something iTunes freezes and stops responding as soon as it finishes checking the playlist. I've been able to burn CDs using other progra
-
1st and 2nd Receipt days of supply calcluation
HI, i was wondering how the first and second receipt days of supply are calcuted when viewing in MD06. I went into the configuration 'Define Receipt Elements for Receipt Days' Supply' via menu Consumption Based Planning --> Evaluation --> Define Rece
-
Hi, We have created routine in output determination(VOFM) to trigger the output type (for IDoc) when ever Sales Order is created and we have configured correctly. Access Sequence containes KOMKBV1, KOMPBV1, etc. When I checked in development system,