I can not upgrade reader from 8.1.1 to 8.1.2 ? Any idea's will be great?

Hello, A few months ago I recieved the adobe reader 8.1.2 update and it installed ok. Then 6 days later I had to do a system restore for another problem I had. And then I noticed the installation 8.1.2 was back to the older version 8.1.1. I came to this web site and downloased the 8.1.2 but at the end of donwload a window opened up saying I could not install it. So I don't know what to do? I don't know if I should remove adobe reader and then go back to adobe download page and try to download the reader agian? And will it be the new 8.1.2 or the older version 8.1.1? I hope some people will know what to do here? thanks for helping a old veteran out. And how do i find and download the new patch for 8.1.2?? thanks for any good Ideas.

> ...a window opened up saying I could not install it.
Could you give us the exact error message (and number, if there is)?
Also, if you can, uninstall 8.1.1, then install 8.1.2, plus the latest security update.

Similar Messages

Touch can not be read from or written to

After upgrading to iTunes 7.7.1 and iPod 2.0, I can not sync at all anymore. I get an error window telling me that my sync failed because my iPod Touch can not be read from or written to. I applied the "5 Rs" troubleshooting tips, to no avail. (5 Rs = restart, reset settings, reset iPod, remove files, restore).
I went to the Genius Bar & they were able to eventually get it to sync, but replaced the unit anyway.
I got home with my new iPod Touch and it had EXACTLY THE SAME problem as my old one did - the "could not read from or write to" my iPod Touch.
I have a new appointment for next week at the Genius Bar.
Has anyone else experienced this problem or know what the fix might be?
I want to try restoring to the iPod 2.0 or prior iTunes software, but can not figure out how to do that.
All help/suggestions are welcome!
Heidi

one of the solutions fixed the error on my itouch:
Symptoms
When using iTunes to sync photos to iPod and iPhone, iTunes creates a folder called iPod Photo Cache in the top level of the folder you selected for your photos. Picking another folder to sync does not erase the previous iPod Photo Cache. Depending on how many photos are being synced, the hard drive could fill up.
Products Affected
iPhone, iPod with color display, iPod photo, iPod nano, iPod nano (2nd generation), iPod (5th generation), iPod (5th generation Late 2006), iPod touch, iPod classic, iPod nano (3rd generation)
Resolution
Drag the folder named iPod Photo Cache to the Trash or Recycle Bin.
If you're syncing from an iPhoto `08 album, use these steps to find the iPod Photo Cache:
1. Go to your Pictures folder (~/Pictures) and locate the iPhoto Library file.
2. Control-click the iPhoto Library file and choose Show Package Contents from the shortcut menu.
3. In the iPhoto Library window, locate the iPod Photo Cache folder and drag it to the Trash.
4. Close the iPhoto Library window.

The disk can not be read from or written to?

When I try and update my Ipod, it gives me this message 'The disk can not be read from or written to' And its really getting on my nerves, How do I fix it so I can actully put music on my Ipod?
VulCAN Windows XP none

This link should help you troubleshoot your error.
http://docs.info.apple.com/article.html?artnum=301267

"Device can not be read from or written to" error keeps coming up...

I have recently updated to the 3.1 firmware on my iPhone 3G (after a couple failed attempts).
The problems seemed to start there when the update froze midway through and I had to try a couple more times. After I did and restored my settings, iTunes said that my backup file didn't work. I tried a couple more times to restore from the backup but ended up having to restore as a new device.
Now, as I try to sync all of my, well, everything, I keep getting an error message.
It synced all of my contacts, apps, calendar, etc., but when it gets to my music and videos it will sync a bit of it before giving me the error messages:
"Cannot sync ___, the required disk is not found"
and immediately after,
"Device can not be read from or written to."
I've tried syncing my iPhone many times, and these errors keep coming up.
What should I do?

Hi,
This article: http://support.apple.com/kb/HT1207 provides tips that will resolve issues causing this message to appear with iPhones and iPods.
Make sure the iPhone is directly connected to a high-speed USB2 port on the PC, using the cable that came with it.
-Jason

Ipod shuffle can not be read from or written to?

I just bought a used ipod shuffle for my mom and I restored the ipod to original settings and updated software and when I try to add songs it keeps saying ("ipod name" could not be synced. The Disc could not be read from or written to.) Does anyone have any suggestions for me?
Appreciate it.

The only thing that I saw that was out of date was the version of Itunes I was using. I updated that and now I am getting a different message. "Can not find the required disk." whats going on.

Disk can not be read from or written to

This iPod nano second gen is brand new. Bought it today and I put like 10 songs and 10 photos on for my sister and now it's saying "disk can not be read from or written to" and now it's not showing up in iTunes or "My Computer". Help, please?

Is there an error number listed in the message? This would be helpful. You may also want to check for other threads that may have already answered your questions before posting. Another good option even before using the forums is to go to the iPod nano support section and then search through the articles for possible solutions. The links I have provided to some of your threads have come from aquick search of the problem you listed starting on the main support page Support.

Can not be read from or written to

OK, so I've had my Gen 3 for several years, I recently restored it and formated it for my windows machine to transfer some files from my windows to my Mac.
Upon restoring it back and refortmatting it to Mac, I learned that it now gives me an error message when adding playlists that says:
"this ipod can not be read from, or written to"
any idea what that is all about?

Have you had a chance to look at this troubleshooting document? It may be of some help: "Disk cannot be read from or written to" when syncing iPod

When syncing photos getting error iPhone can not be read from or written to

I am getting an error only when I try to sync photos. Error is iPhone can not be read from or written to. This only happens when I am syncing photos, so far everything else syncs fine. I have an iPhone 3G S. I had some pictures on the iPhone that I deleted, still no sync. I am restoring the iPhone right now.

I am having the same issue. I get "iphone unable to sync, an unknown error occurred (-51)" I have restored twice and once even set up as a new iphone. Nothing so far has worked. If anyone has any suggestions, please pass them on

Itunes application can not be open the disk can not be read from or writte

itunes can not be opened the disk can not be read from or written to. That is the warning i get when i click my itunes to open it. Problem...
there is no disk:) i have no idea what this warning means.. i have restarted and nothing.. i updated itunes and same warning.. there is no disk in the drive at all..
infact i made sure i was in a room with no other disks.. Help??

A few things to try:
• Restore Permissions, using Disk Utility (in ~Applications/Utilities)
• Set the correct Ownership & Permissions for the iTunes folder:
Select the iTunes folder in ~/Users/YourUsername/Music.
Get Info (command-I).
Expand 'Ownership & Permissions' and 'Details:'
You must read: 'You can Read & Write': if not, change it.
Click on the 'Apply to enclosed items...' button.
Hope this helps.
M

Since upgrading to Yosemite on my iMac, My Mail app refuses to open, Safari won't load, and I can't upload pictures from my iPad... Please help, any ideas very welcome. I've had my iMac since 2011, and have never had any issues to deal with before..

Since upgrading to Yosemite on my iMac: My Mail app refuses to open, Safari won't load, and I can't upload pictures from my iPad...
Please help, any ideas very welcome. I've had my iMac since 2011, and have never had any issues to deal with before..
Thanks

29/11/2014 20:17:01.315 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 11 seconds. Pushing respawn out by 49 seconds.
29/11/2014 20:17:37.013 com.apple.backupd[616]: Finished scan
29/11/2014 20:17:43.108 com.apple.backupd[616]: Saved event cache at
/Volumes/Time Machine Backups/Backups.backupdb/Geoff Lambrechts’s iMac
(2)/2014-11-29-200648.inProgress/9B453663-603F-40B8-AC21-24F05C724E15/.6162AD34- 38F8-30AB-98E0-4A22FB9D311F.eventdb
29/11/2014 20:17:43.207 com.apple.backupd[616]: Not using file event
preflight for Macintosh HD
29/11/2014 20:18:01.561 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 11 seconds. Pushing respawn out by 49 seconds.
29/11/2014 20:18:16.288 com.apple.xpc.launchd[1]:
(com.apple.quicklook[715]) Endpoint has been activated through legacy
launch(3) APIs. Please switch to XPC or bootstrap_check_in():
com.apple.quicklook
29/11/2014 20:18:23.705 com.apple.SecurityServer[56]: Session 100013 created
29/11/2014 20:18:32.046 mdworker[718]: code validation failed in the
process of getting signing information: Error Domain=NSOSStatusErrorDomain
Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
29/11/2014 20:19:01.662 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 11 seconds. Pushing respawn out by 49 seconds.
29/11/2014 20:19:45.458 com.apple.xpc.launchd[1]:
(com.apple.imfoundation.IMRemoteURLConnectionAgent) The
_DirtyJetsamMemoryLimit key is not available on this platform.
29/11/2014 20:19:59.123 com.apple.xpc.launchd[1]:
(com.apple.PubSub.Agent[725]) Endpoint has been activated through legacy
launch(3) APIs. Please switch to XPC or bootstrap_check_in():
com.apple.pubsub.ipc
29/11/2014 20:19:59.123 com.apple.xpc.launchd[1]:
(com.apple.PubSub.Agent[725]) Endpoint has been activated through legacy
launch(3) APIs. Please switch to XPC or bootstrap_check_in():
com.apple.pubsub.notification
29/11/2014 20:20:01.138 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:21:01.484 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:21:13.430 com.apple.backupd[616]: Found 4529 files (1.1 GB)
needing backup
29/11/2014 20:21:18.786 com.apple.backupd[616]: 2.82 GB required (including
padding), 1.24 TB available
29/11/2014 20:21:31.775 Console[734]: Failed to connect (_consoleX) outlet
from (NSApplication) to (ConsoleX): missing setter or instance variable
29/11/2014 20:21:34.230 WindowServer[162]: disable_update_timeout: UI
updates were forcibly disabled by application "Console" for over 1.00
seconds. Server has re-enabled them.
29/11/2014 20:21:36.898 WindowServer[162]: common_reenable_update: UI
updates were finally reenabled by application "Console" after 3.67 seconds
(server forcibly re-enabled them after 1.00 seconds)
29/11/2014 20:21:36.971 coreservicesd[83]: SFLEntryBase::ListHasChanged
mach_msg returned 10000004d
29/11/2014 20:22:01.817 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:23:02.170 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:24:02.547 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:25:02.168 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:02.233 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:02.236 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:02.284 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:03.059 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:25:12.674 com.apple.xpc.launchd[1]:
(com.apple.imfoundation.IMRemoteURLConnectionAgent) The
_DirtyJetsamMemoryLimit key is not available on this platform.
29/11/2014 20:26:03.464 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:27:03.841 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
On 29 November 2014 at 19:29, Apple Support Communities Updates <

HT201263 my iphone is stuck in the connecting to itunes screen, i can not restart my phone the top power button is broke? any ideas? it wont let me connect to itunes either, usb device can not be detected

my iphone is stuck in the connecting to itunes screen, i can not restart my phone the top power button is broke? any ideas? it wont let me connect to itunes either, usb device can not be detected

Hello Alex_boi941,
Thanks for using Apple Support Communities.
I'm sorry to hear that your iPhone's power button is not functioning correctly. To be able to get full functionality of your phone, it would need to be repaired.
Apple - Support - Service Answer Center
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
Take care,
Alex H.

I created a partition on my iMac drive. I have trashed the files that were in the partition but I can not trash the icon. I tried with Disk Utility. Any ideas?

I created a partition on my iMac drive. I have trashed the files that were in the partition but I can not trash the icon. I tried with Disk Utility. Any ideas?

If I understand correctly, the partition will still be on the disk and therefore mounted on the desktop. You would need to remove that partition to remove the icon.
Be careful if you try this, don't upset the main Macintosh HD partition or you may lose the OS and your files.
And always have a full tested backup of your system before modifing disk partitions.

ITunes match has not upgraded some of my tracks to a higher quality! Any ideas please?

iTunes match has not upgraded some of my tracks to a higher quality! Any ideas please?

Hi
Read this user tip Some User Tips (April 2015)
Jim

Songs won't update. Error message "can not be read from or written to"

Right, so maybe someone can help me.
I've had my Nano since Christmas and have never encountered any problems with it until recently.
Whenever I try and update my iPod (or my husband's for that matter) I get the error message: Attempting to copy to the disk "Gatsby" (name of my iPod) failed. The disk could not be read from or written to"
Sometimes one or two songs will work, and then I'll get the message. If I try again another few songs will work and I'll get the message again.
I have tried everything I can think of.
I have tried resetting my iPod. I've tried reinstalling iPod Updater and iTunes. I've tried restarting the computer. I've tried restoring the iPod to factory settings. And I still have the same problem.
I tried calling Apple Support but they weren't able to help me much. So maybe someone here has an idea. PLEASE HELP!
Since I've restored the iPod I no longer have any songs on it. I only have the few that have managed to copy inbetween attempted updates. My poor little iPod is useless until I can fix this problem.
I have iTunes v6.0.4 and iPod Updater v1.1.1 (the update from 2006-03-23)
Please help!
Thanks!
iMac G5 1.8GHz PowerPC Mac OS X (10.4.6)

Well, I know my operating system is up to date. I know iTunes is up to date. I know iPod Updater is up to date.
I don't think it's a damaged music file, because it doesn't hang on one certain song. It manages to update a few, then I get the error, if I try and update again, it does a few more songs then I get the error again. I've updated dozens of times with the same selection of songs and I've never had a problem.
I tried resetting the iPod. I tried restoring it.
Still hasn't helped.
Someone suggested using fsck from my terminal, but it came back saying everything appeared to be okay. But, my songs are all on my external hard drive, does that make a difference?
It's never seemed to matter before.
I don't know what else to try.
I don't think it's a problem with the iPod itself. My husband's iPod is doing the same thing, which makes me wonder if it isn't my computer, or perhaps a problem with iTunes or the iPod Updater.
I've tried using a different cable, and different ports, but I still have the same problem.
Any ideas?

Disc can not be read from or written to

I've had a huge problem with Itunes over the last few days. Many of my songs have the grey exclamation mark and for some reason itunes cannot locate them. Super frustrating. "The original file cannot be found."I have been able to locate some files but many have been totally lost.
In order to replace the songs I can't find, I'm trying to add them again to itunes (from CDs, etc.). For some reason, when I try to add, I get the following error message "Attempting to copy to the disk "Macintosh HD" failed. The disk could not be read from or written to"
For the love of god please help me before I lose all of my hair.

Get an external drive and back up as many of your files as you can while you can. You may have to do it folder by folder or file by file. The disk may be corrupt (though for what reason I don't know) or it could be bad.
You want to verify disk, not verify or repair permissions. Repair Permissions failed probably for the same reason you are having these other problems: there is a problem with the disk. While you can run Verify Disk, you cannot run Repair Disk on your main drive unless you boot from another drive (such as the Install CD). If you boot from the Install CD (with the disk in, hold down C while booting) it will ask a few language questions then you'll get to a point where there is a menu bar at the top of the screen. You can run Disk Utility from the menu and do a disk repair. The repair may fix it but may not.
Third party disk utilities such as Disk Warrior might be able to do more for you than Disk Utility.
And you might want to give Apple Support a call. They are there to help.

I can not upgrade reader from 8.1.1 to 8.1.2 ? Any idea's will be great?

Similar Messages

Maybe you are looking for