I can't able to access BW query(securtiy warning)

Hi expert's,
i installed business object and xcelsius in my bw server. when i am opening open query option in bex add on tool. it's giving error as follows
security warning pop up window in that three tabs enable macros, diable macros..
when i selected enable macros push button it will give a another add on bex in excel...... when i select open query in that it will the error as follows
the macro 'sapbex.xla!reponewquery' cannot be found
how to resolve this
Regards
Harikrishna N

hi there
please find those posts
XCELSIUS DYNAMIC DATA SOURCE
Dynamic datasources for Xcelsius
xml data button
http://resources.businessobjects.com/support/cx/samples/learning/downloads/ttv4-xml_data_button.pdf
XCELSIUS WEB SERVICE
unable to use web services
good luck
Amr

Similar Messages

Can't able to access the duplicate control?

I have created the duplicate control in tabpage as shown in below code snippet. but i can't able to access the created object.
Code Snippet
private void button1_Click(object sender, EventArgs e)
TabPage newPage = new TabPage();
foreach (Control c in tabControl1.TabPages[0].Controls)
Control cNew = (Control)Activator.CreateInstance(c.GetType());
PropertyDescriptorCollection pdc = TypeDescriptor.GetProperties(c);
foreach (PropertyDescriptor entry in pdc)
object val = entry.GetValue(c);
entry.SetValue(cNew, val);
newPage.Controls.Add(cNew);
tabControl1.TabPages.Add(newPage);

Hi Carl,
Thanks for your update.
Now I got some idea. But I have one more issue.
During button click the I need all the properties in textbox in TabPage1 to the textbox in NewTabPage(refer above image). but later if we change in text in any textbox the replaced text should not reflects the other text.
E.g: If textbox.text="Microsoft";
during buttonclick i need the textbox in New Tab Page should be Microsoft.
later if I edit the text should not New Tab Page or TabPage1 the text should not reflects from one control to other.
Regards,
R.Senthil Kumaran
Hello,
I could get what you are dealing with now, and to get that done, I would recommend you use the following way.
1. Add properties to UserControl, you could define the names of these properties with custom rules.
public partial class UserControl1 : UserControl
public UserControl1()
InitializeComponent();
public string StrTxtBox1
get { return this.textBox1.Text ; }
set { this.textBox1.Text = value; }
2. Use similar way you shared and edit it to just copy the specific properties.
TabPage newPage = new TabPage("NewTabPage");
newPage.UseVisualStyleBackColor = tabControl1.TabPages[0].UseVisualStyleBackColor;
foreach (Control c in tabControl1.TabPages[0].Controls)
Control cNew = (Control)Activator.CreateInstance(c.GetType());
PropertyDescriptorCollection pdc = TypeDescriptor.GetProperties(c);
foreach (PropertyDescriptor entry in pdc)
if (entry.DisplayName == "StrTxtBox1"|| entry.DisplayName == "Location")
object val = entry.GetValue(c);
entry.SetValue(cNew, val);
newPage.Controls.Add(cNew);
tabControl1.TabPages.Add(newPage);
In this case, if we have a lot perproties to copy, you could consider capture them by the custom rules you defined at #1 like this one.
if (entry.DisplayName.Contains("StrTxt")|| entry.DisplayName == "Location")
object val = entry.GetValue(c);
entry.SetValue(cNew, val);
Result:
And if possible, you could consider using this way which just copies the Text , Location or any other property and we don't need to create any usercontrol.
TabPage newPage = new TabPage("NewTabPage");
newPage.UseVisualStyleBackColor = tabControl1.TabPages[0].UseVisualStyleBackColor;
foreach (Control c in tabControl1.TabPages[0].Controls)
Control cNew = (Control)Activator.CreateInstance(c.GetType());
PropertyDescriptorCollection pdc = TypeDescriptor.GetProperties(c);
foreach (PropertyDescriptor entry in pdc)
if (entry.DisplayName == "Text" || entry.DisplayName == "Location")
object val = entry.GetValue(c);
entry.SetValue(cNew, val);
newPage.Controls.Add(cNew);
tabControl1.TabPages.Add(newPage);
Regards.
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Can't able to access the Jar files which is kept inside the folder.

Hi,
I am using the eclipse IDE, my project folder contains the folders src, bin, .metadata, .settings
if i place the jar file in the same location of the above mentioned folder means i can able to use the Jar file in eclipse(in my project).
But i create one folder in the same location in the name of Jar or anything and all jar files are placed inside the folder,then i can't able to access the jar file in eclipse(in my project).
How i can solve this problem?

RajivGuna wrote:
..How i can solve this problem?Put Eclipse aside for the moment and learn how the SDK tools work at the level of the command line, then you will be much better placed to figure how to do it in the IDE. If you are still having problems, I suggest you ask on an [Eclipse forum|http://www.eclipse.org/forums/].

Can't able to edit the query in query designner

Hello every one,
Please help me in below issue. It is really important.
Actually i have create the query in the BI- Development and that i pass to the production.
Now. I tried to again edit the same query in the development , and for that i have create a new request . after creating the requesting i again logged in to the BEx query designner , but still i can not able to edit the query..
i have create the request in the correct manner. So, what will i do now? Please help me in this.

HI Gaurav,
Again i create a request by below steps
->open the ADW by RSA1
->go to Transport connection
->go to query element - > select my query -> select all necessary query element -> and then click on the truck symbol (i have not create BEx request)
and then i create the request
then i open the query in the designer and again i can not able to edit the query
error is same
-> BEx transport request is not available or not suitable
-> choose an existing request
Now,tell me what can i do? this is really an issue for me and help me to solve..Please all other can also give there comments
one more thing i want to add is , i have also check the object changabilty , there the query element and all related to query are "not changable". Is this an issue.
Edited by: james macwan on Oct 16, 2008 8:39 AM

I can't able to access shapes(circle,star) in tool,only rectangle is used.what to do for drawing other shapes?

i can't able to access shapes(circle,star) in tool,only rectangle is used.what to do for drawing other shapes?

Mylenium is right; we don't know enough to help you.
Screenshots of your interface would help. Also, more information about your OS, version of AE, etc.: FAQ: What information should I provide?

I can't able to access the itunes stores to download and update new apps

iam using iphone4 for more than a six months. but for the last 10days i can't able to access the itunes store to download a app or to update it. what should i do. my itunes is opening properly. i can download videos pictures and songs from my system. the problem is only with itunes stores. i also updated the account information. which also doesnt got solved the problem. what should i do??

http://support.apple.com/kb/TS1559

Re:Can't able to access shared folders from different VLANs in SG300 series switches

Hi All,
I supplied 3 numbers of SG300 series switches for the sole reason to have inter-vlan routing. I created 4 VLANs in the switches and made one switch as Layer 3 switch and other 2 as Layer 2 switch. Inter-Vlan routing is working fine. I am able to ping PCs from different VLANs. But I am not to access shared folders. Customer has installed Window 2003 server installed and it is in VLAN 1. There are some folders created in this server and it is very important for users to have access to the folders.Also, I am not able to access shared folders in other VLANs. I have created a case with Cisco small business and I got a reply saying that the switches will not support shared folder feature, which I think is not real. I am getting a very time to implement this solution in the network. I have a Sonicwall firewall after Core switch which is connected to ISP.
ISP<----->Sonicwall FW<----->Core Switch<------>Layer 2 switch<------>Layer 2 switch
Kindly help me out to resolve this issue.
Regards,
Prashant K

Hi Prashant,
I think you're running into a Windows firewall issue. SMB file sharing, by default I believe, is only allowed on your local subnet. Please try disabling windows firewall on the computer hosting the shared folder, then see if you can access the shared file.
Best,
David
PS: It looks like this post got published twice. You can delete the other one using the task bar on the right.
Please remember to rate helpful resonses and identify correct answers.

Can't able to Access the internet in my Windows server 2008

I installed windows server 2008 server in my machine, it has only windows sever 2008 single OS.
Now my problem is, i am not able to Access internet, I tried some intel softwares, to install Ethernet drivers, but no use.
What i have to do now..?
Please help in this issue,
Thanks in advance
surendra mannem

Hi,
Please confirm you have configured the correct TCP IP address, if you have the static IP address please confirm your default gateway and the DNS server address
is correct and work properly.
More third party information:
Windows 7 Static IP
http://blog.mclaughlinsoftware.com/2009/11/26/windows-7-static-ip/
How to Set Static IP Address in Windows 7
http://www.youtube.com/watch?v=wmYBBHvfpTg
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Can't able to access the internet in window server 2003 sp2 64bit.

Hi,
recently i installed , windows server 2003sp2 64bit, every thing was perfect expect, internet.
Ican't access the internet in that server, i tried to update the LAN drives but no use, I tired t install Adapter drives no use.
What i have to do now,
Thanks in advance,
Surnedra Mannem.

Hi
Is this server in a domain or stand alone?
Are you plugging the server direct in to the Internet Router or via Switches?
What is the status of the Network Adapter Connected, Disconnected or Limited?
Could you please tell us what is the IP address you are getting on the server?
Try turning off the firewall also what browser are you using to access the internet on the server.
Thanks

I am being asked to upgrade to iCloud Drive but indications are that I will not be able to access up to date details on any of my documents on my Mac without going into iCloud first. Have I got this interpretation right or can I save changes to acce

I am being asked to upgrade to iCloud Drive but indications are that I will not be able to access up to date details on any of my documents on my Mac without going into iCloud first. Have I got this interpretation right or can I save changes to access the new versions on my iMac?

That is Apple's statement:
Using iWork with iCloud Drive - Apple Support
Options for iWork customers
You can upgrade to iCloud Drive today if you want to keep your documents up to date in iOS 8 and OS X Yosemite, and you want to use the iWork web apps on iCloud.com and the Share via iCloud feature.
You can upgrade to iCloud Drive later if you want to keep your documents up to date with your apps on iOS 7 or earlier and OS X Mavericks or earlier.
Upgrade to iCloud Drive today
To access the most recent versions of your documents from a Mac with OS X Mavericks or earlier, you’ll need to go to iCloud.com and access Pages, Numbers, and Keynote from there. On a PC, you can install iCloud for Windows and set up iCloud Drive.
If you upgrade to iCloud Drive now:
Your documents will keep up to date across devices with iOS 8, Macs with OS X Yosemite, PCs with iCloud for Windows, and iCloud.com.
Your documents will no longer keep up to date on devices with iOS 7 and Macs with OS X Mavericks or earlier.
You’ll be able to use the iWork web apps on iCloud.com.
You’ll be able to use the Share via iCloud feature with iOS 8, OS X Yosemite, and iCloud.com.
Documents you previously shared via iCloud will be accessible to collaborators.
Upgrade to iCloud Drive later
Note that until you upgrade your iCloud account to iCloud Drive, you won’t be able to use the iWork web apps on iCloud.com or the Share via iCloud feature. If you don’t upgrade to iCloud Drive at this time:
Your documents will keep up to date across devices with iOS 8 and across devices with iOS 7 and Macs with OS X Mavericks or earlier.
You won’t be able to use the iWork web apps on iCloud.com.
You won’t be able to use the Share via iCloud feature.
Documents you previously shared via iCloud won’t be accessible to collaborators until you upgrade to iCloud Drive.

How can I get the 23 July update to load onto my iPad. I haven't been able to access my documents or work for weeks and need to use it. Has anyone else had similar problems?

How can I get the 23 July update to load onto my iPad. I haven't been able to access my documents or work for weeks and need to use it. Has anyone else had similar problems?

Hello Arthur,
Thank you for the reply.
You were correct that deleting the app and reinstalling it was the only thing to make it work but unfortunately I lost all the documents I made, even though they were backed up to iCloud before i deleted the app. At the same time as deleting pages I had to delete keynote and numbers too, so I've lost all the documents in them too.
The mb of data which was assigned to each programme in iCloud has reduced, so. I guess they are gone for good. Is there any other way to reaccess them?
Not your fault but I am a bit fed up the the iPad. I have lost work that I've done and have no other copy apart from what was in iCloud, as I don't have a printer and couldn't email them too myself as I couldn't get into the programme and i've also got episodes of tv series I purchased that I can't download and albums that are half downloaded with songs missing, so I feel a bit swindled out of time and money and am going back to DVD , pen and paper and CDs .
Instead of using iCloud I guess the only way to make sure I don't loose any more documents it to email them to myself each time I save them on the iPad. Is there anything else you could suggest please?
I don't have any other apple products apart from iPods, so I can't access the iCloud on anything else can I?
Thanks
Amanda

I am not able to access my photos through the photo application... when I click on the photo app, I can see the camera roll but a transparent album screen is over it and I cannot click on the photos to see it... can any one please help ???

I am not able to access my photos through the photo application... when I click on the photo app, I can see the camera roll, but a transparent "album" screen is over it and I cannot click on the photos to see it... can any one please help ???

Known bug. Quit the Camera App, double-tap the home key and delete Camera from the recent apps bar. Fire it up again, should be good.

I have a question. For the past week I have not been able to access my iTunes app it always kicks me out. I've turned it off and on and still nothing. I was wondering how can I get it to work or what should I do. Thank you

I have a question. For the past week I have not been able to access my iTunes app it always kicks me out. I've turned it off and on and still nothing. I was wondering how can I get it to work or what should I do. Thank you

You need a computer with iTunes and an internet connection
Try:
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I am moving to Alice Springs, Australia, this summer from the U.S. I would like to get the new iPad. How can I found out if I will be able to access all the functionality in Alice? Will I need to purchase a local plan of some sort?

I am moving to Alice Springs, Australia, this summer from the U.S. I would like to get the new iPad to use while traveling back and forth from the U.S. to Australia, and within Australia. How can I found out if I will be able to access all the functionality of the iPad in Alice? Will I need to purchase a local plan of some sort? I have never owned an Apple product before -- I'm a newby!

Aside form the limitation of LTE to the 700MHz and 2.1GHz bands (which rules out LTE in Europe I gather, at least as it stands now) the new iPad should let you use a GSM 3g/2g/edge network anywhere. The CDMA Verizon model will only be able to use it's native CDMA radio band in the USA (that radio will be locked to Verizon), but it's international GSM radio is the same as the AT&T model.
Keep in mind though that by far the cheapest option when abroad is to take advantage of free wifi as much as possible (well, that is always the cheapest option, since it is free). I know several people who have taken their wifi-only iPads and iPad2s to Europe and said they did not find the lack of 3G really inconvenient at all as most towns had plenty of free or cheap wifi access all over the place.
And in 3 years, your iPad will be at least 2-3 generations behind, LTE will have already been replaced by 5G or whatever the next new generation of cellular ends up being named (and the "young" kids will be wondering what the heck 3G even means or meant - dang that stuff was from the olden days!), and you can pitch that ancient piece of technology and start things all over again

Unable to open query designer while able to access BI system

Hi Experts,
   I have problem while opening query designer, analyzer , WAD . I get the below error. But when i access the relevant BI system i am able to access it well , i dont get any RFC Error. Will there any port setting for query designer separately. This is problem faced at offshore which connects to client servers at onsite. Onsite guys are not facing any issues openning query designer or analyser. Please guide as i am not good in basis ..
RFC_ERROR_COMMUNICATION
Message
CMALLC : rc=27 > Connect from SAP gateway to RFC server failed
Connect_PM GWHOST=163.164.XX.XXX, GWSERV=sapgw00, SYSNR=00
LOCATION    SAP-Gateway on host XXXXXXX/ sapgw00
ERROR       timeout during allocate
TIME        Mon Sep 12 14:20:38 201
RELEASE     700
COMPONENT   SAP-Gateway
VERSION     2
RC          242
MODULE      gwr3cpic.c
LINE        2066
DETAIL      no connect of TP sapdp00 from host 163.164.XX.XXX, after 20 sec
Thanks
Vamsi
Edited by: vamsi talluri on Sep 14, 2011 6:57 PM

Hi Experts,
   I have checked with basis team , my issue is resolved, please find the solution .
1) Add corresponding system server names in host files of the offshore desktops.
2) After that basis has added offshore natted ips in sap gatewat parameter/alternate hostnames in system profile (rz10 tcode).
Then offshore are able to access query deisgner etc....
Regards
vamsi

I can't able to access BW query(securtiy warning)

Similar Messages

Maybe you are looking for