I can't get my Dazzle Hollywood Bridge to output timeline to TV monitor

Pretty much as the title says.
All I get on screen are variations on a black & white picture from a normal solid picture to various moving stripes & checkerboards, all in black & white.
I did get it to work very briefly for about ten minutes the other day & I had a moving colour picture but then I changed a setting & it's gone back to being as mentioned above.
Does anyone have any ideas?
I gather that Dazzle don't have a great reputation.

Thanks for that.
I've managed to get my Dazzle bridge to display to the TV but it still seems very flaky.
Basically, I switched my video out put to "non-controllable device" & suddenly, up came colour on the TV! Woo-hoo!!
Then, my e-mail went ping so I switched apps to check my messages & when I went back it was a black & white checkerboard again! D'oh!!
So I fiddled around with plugs & settings a bit & suddenly, when I went on to "basic firewire" up came colour again! Woo-hoo!!
This happened several times & there doesn't - in my case at least - seem to be a setting that's the "right" one, just that forcing the bridge to do something different seems to kick it in to action.
A pain in the posterior, to be sure, but at least I'm able to get some work done now.
Just to confirm, I'm sending all frames, mirror on desktop is on, refreshing the AV has no effect (by which I mean that's not the thing that's making it work again each time) & I have the external hard drive connected to the Firewire 800 output, the Dazzle bridge connected to the Firewire 400 output & a single yellow (is that composite?) connector going to my TV with audio set to default so that it comes out of the laptop speakers.

Similar Messages

  • If I own Adobe Photoshop Elements 12 and have it installed on my computer, how can I get access to Adobe Bridge without a monthly subscription?  Is there a way to use Adobe Photoshop and Bridge without paying a monthly fee?

    If I own Adobe Photoshop Elements 12 and have it installed on my computer, how can I get access to Adobe Bridge without a monthly subscription?  Is there a way to use Adobe Photoshop and Bridge without paying a monthly fee?

    Hi Jaclyn2,
    Please follow the steps mentioned in the kb: http://helpx.adobe.com/creative-suite/kb/error-update-server-repsonding-cs4.html .
    Regards,
    Romit Sinha

  • Can't get computer to show volume input/output controls, Can't get computer to show volume input/output controls

    Can't get computer to show volume input/output controls, Can't get computer to show volume input/output controls

    How, what, why, where, when!
    This is the Logic Pro forum.
    We're going to need more information if this is in regards to using Logic Pro.
    Computer model & year, audio interface, Logic Pro version..etc..etc

  • My macbook pro was repaired and since then i can't get nor photoshop or bridge to initialize. a window appears that says it has  initializing problems due to an icc profile issue.

    my macbook pro was repaired and since then i can't get nor photoshop cs5 or bridge cs5 to initialize. a window appears that says it has initializing problems due to an icc profile issue.
    there appear two error messages. the first one says that there has been a problem sincronizing because of a programme error. the second one appears after you clicked ok on the first window and says that photoshop couldn't be initialized because the icc profile is invalid.
    does anyone know if i have to delete any system or photoshop preference? the illustrator is also having troubles. thanks

    thanks! what finnally worked better was renaming the «settings» folder in te «color folder» in the library with ~before the name. now indesign is asking me for thw icc profiles but still works, so i asume i can reinstall color settings only for indesign and go on.

  • Since updating os, can't get net through blackberry bridge

    Hi,
    I had the same problem as everyone else with my pb dying and not recharging etc etc. Have now fixed it and updated os, but since then, can't get Internet through bridge. I'm going crazy. Anybody know what's the matter?? Thanks.

    Are you using the Bridge browser?
    Or what happens... you click to open and.... ?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How can I get the Elapsed Time express to output in milliseconds?

    I am trying to get the Elapsed Time express to output in milliseconds or in seconds to three decimal places. I am pretty new at this.
    Thanks in advance!

    I'm not sure I understand your question. The output of the Elapsed Time Express VI is a DBL. It's already a floating point number. The default format for a numeric indicator is 6 digits of precision. You can change this in the properties for the indicator.
    To learn more about LabVIEW it is recommended that you go through the tutorial(s) and look over the material in the NI Developer Zone's Learning Center which provides links to other materials and other tutorials. You can also take the online courses for free.
    Attachments:
    Example_VI.png ‏4 KB

  • I can not get sound out of the HDMI output on my mac mini. happened before after unpluging headphone and had to change some hrz number.

    I have had this problem before. I just cant remember how I fixed it. I am not getting any sound from the HDMI output. Everything is selected properly and volumes are set correctly. Last time I had to change a megahrz thing and thats where I am stumped.

    Mac HD/Applications/Utiltiies/Audio MIDI Setup
    441000 or 48000 Hz for Format

  • Importing JVC MiniDV through Dazzle Hollywood Bridge - Trouble!

    I have a project that is due tomorrow! This is what has happened. I plug my JVC camera into my Dazzle bridge, connect the bridge to my iMac through firewire. Next, I open iMovie, and normally it will bring up the video capture screen and tell me that there is no device control. However, at least once I was able to import video manually without any trouble. But now, even when I use the Pass Through on the bridge, press Play on the screen(import screen in iMovie), click import, tell it to add it as a new event, and then click Import again and press play on my camcorder, the little red record light will come on but the timer next to it stays at zero - even though my video is playing on the camcorder. I hope this isn't too confusing, but would love any direction!!!

    Hi
    *Some general - unsorted thoughts about this Camera = AD-box in this Case.*
    Test another FW-Cable.
    FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin FW one ?
    Test Your Camera on another Mac so that DV-in still works OK
    Toogle in iMovie pref: Play-back via Camera (on<->off some times)
    Free space on internal (start-up) hard disk ? Please specify the amount of free space.
    (Other hard disks don't count)
    Delete iMovie pref file may help sometimes. I rather start a new account, log into
    this and have a re-try.
    Using WHAT ? :
    • Mac OS - X.5.4 ?
    • QuickTime version ? (This is the heart in both iMovie and FinalCut)
    • iMovie 8 (7.1.?) ?
    • iMovie HD 6 (6.0.4/3) ?
    Does Your Camera work on another Mac ?
    Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
    This is lethal to the A/D-chip in the Camera = needs an expensive repair.
    (Hard to find out - else than import/export to another Mac ceased to work
    everything else is OK eg recording and playback to TV)
    Other ways to import Your miniDV tape:
    Use another Camera. There where tape play-back stations from SONY
    but they costed about 2-4 times a normal miniDV Camera.
    If Your Camera works on another Mac. Make an iMovie movie project here and move it
    over to Your Mac via an external hard disk.
    (HAS TO BE Mac OS Exchange formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
    (Should be a FireWire one - USB/USB2 performs badly)
    from LKN 1935:
    Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
    from Karsten:
    in addition to Bengt's excellent '9 yards of advice' ..
    camera set to 'Play' , not rec/computer/etc.?
    camera not on battery, but power-line?
    did your Mac 'recognize' this camera before...?
    a technical check:
    connect camera, on, playback, fw-connected...
    click on the Blue Apple, upper left of your screen ..
    choose 'About../More..
    under Firewire.. what do you read..?
    Yours Bengt W

  • Can't get working as wireless bridge - help!

    Folks I am trying to setuy my base station as a wireless bridge to ultimately connect to a network printer. I try to first connect it to my wireless network form my netopia dsl wireless router, but am having no success. Here's what doesn't make sense:
    - my base station won't recognize any wireless networks in the area unless I have my Macbook Pro's built-in airport turned on. This makes no sense - what if I had no built in card
    - the airport extreme doesn't ask for any WEP or WPA type security to connect to my wireless network. It just asks for a password.
    I am at my wits end with this base station. Netopia bridges ares so much easier to configure. Can anyone please give me some guidance.
    I just want to have the base station see networks to begin with, let me choose the one I want, provide it the necessary WEP password key for my network, and then plug it into the ethernet port of my printer.

    Let's double-check your AirPort Extreme Base Station's (AEBS) bridge configuration settings ...
    To set up the AirPort Extreme Base Station (AEBS) as a bridge, temporarily connect your computer directly (using an Ethernet cable) to the LAN port of the AEBS, and then, using the AirPort Admin Utility (found in /Applications/Utilities), make these settings:
    Network tab
    o Distribute IP addresses (unchecked)
    o Apply the new settings.
    In a bridge configuration, the AEBS must be connected to the Netopia DSL wireless router via an Ethernet cable. This is NOT that same as the AirPort Express Base Station (AX) which has the option to connect to an existing wireless network as a client.

  • Can't get past "Waiting for Bridge CC" in MiniBridge/Photoshop cc

    I subscript to Photoshop CC and have been using it successfully.  However, I tried starting the program without a connection to the Internet, and I believe it may have loaded a trial version. 
    The problem I amhaving is the MiniBridge doesn't connect with Bridge CC even theough Bride CC is launched.
    I followed the online advice to delete the SwithBoard folder, retarte the computer and then restart Photoshop.  The SwitchBoard folder was reegenerated, but I'm still getting the same message: Waiting for Bridge CC.

    http://helpx.adobe.com/photoshop/kb/error-waiting-for-bridge-cs5.html
    Please check that you have completed all steps and in order.
    Gene

  • Can't get any audio ("no input or output devices") on MacBook Air, running MAC OSX 10.8.5

    This happened today completely out of the blue.
    I have tried some of the other suggestions posted here and other forums. I did a Disk Utility check and nothing seems wrong with the hard disk,
    Rebooted 3 times.
    Re-set the PRAM
    Tried headphones (still no response from either audio volume key, as both show a circle with line through it,
    and tried System Preferences on Sound, but I get the same message (no devices).
    Tried to locate the preferences file called BezelServices that others have talked about, but can't find it...
    Ted

    This link may help: http://community.m-audio.com/m-audio/topics/m_audio_project_mix_i_o_driver_for_m ountain_lion
    I haven't tried it myself, but I do plan to in the near future, as I dont want to shell out major bucks for a new control surface/interface.

  • Dazzle Video Bridge

    I have a Dazzle USB Video Bridge. Is there a way to import video into iMovie using this? I cannot get iMovie to recognize that it is there. Any ideas are appreciated.

    FunkMaxtor,
    To work with iMovie, I believe you need the FireWire version of the Dazzle Hollywood Bridge.
    Matt

  • Can't get 'clamshell' mode to work with Dell 2408

    I have been trying to get my Dell 2408 working in clamshell mode without any success. I have a USB keyboard, USB mouse, power adapter and monitor via DVI plugged in. I switch the display type to mirror, close the lid, wait for it to sleep, then wake it again by pressing a key on the keyboard.
    The computer wakes, the external monitor flashes but at the incorrect resolution (1200 X 800 instead of 1920 X 1200) then goes back to sleep. This will repeat over and over again until I open the lid of the macbook. I can occasionally get the macbook to wake and display on the eternal monitor but this is very rare, and when it does I get some wired artifacts.
    What's really puzzling is that the monitor works flawlessly in extended desktop mode, and works perfectly with other non mac computers. I took the macbook to the Genius Bar, hooked it up to the apple cinema displays and i didn't get the same problem! Grrr....
    So I just don't get it, both the computer and display seemingly work fine independently from one another, work fine in extended mode, yet in clamshell mode have some fairly major issues.
    Anyone have any ideas?

    My dell 2408 arrived today and I'm having exactly the same problem.I cant get it to go into clamshell mode. I lie, I got it to go into clamshell mode once. I don't know what I did. But it certainly isn't willing to go into clamshell mode again any time soon.

  • I can't get it to download

    I purchased Lion from the app store and I can't get it to download.

    I find the download easier to monitor in the App Store on the Purchased tab:
    Regards,
    Colin R.

  • Can't get rid of original Audio

    I'm overwriting a clip on the timeline with a clip from the events, but I can't get rid of the audio from the timeline clip. What's up? Even when I cut the clip I want to replace, its audio remains.

    I did not separate it.
    What do you mean by "edit style"? Can't seem to find a way to adjust that.
    It seems that whatever I do, the original audio stays.  I tried to overwrite, and I tried to completely cut out the original audio... I'm trying to cut in a close-up over a medium shot and want to use the dialogue from the close-up.
    Thanks.

Maybe you are looking for