I can't get my projects in Final Cut Pro X to work in 1080p. One turned out to be 1080p but I did everything the same as the ones that did not. ***? Any ideas?

I can't get my projects in Final Cut Pro X to work in 1080p. One turned out to be 1080p by "accident" but I did everything the same as the ones that did not. Same camera/settings (shot in 60i). I didn't really care cause I had to get some stuff done, but now I know I "can" dp them in HD but can't figure why the one went up to YT in full HD (and made a copy in my movies folder. That one project acted totally different than the other 5 but I didn't change anything. Can't get it to work again. ***? Any ideas?

No problem! If you're worried about more complicated edits (which in all honesty, should work no matter how many clips you select or how many effects are attached to them), you can always compound a clip first, and then copy it over after if you're afraid of lots of track clutter getting in the way. Not sure if they would break apart afterwards though if you wanted them to.

Similar Messages

How can I get a version of Final Cut Pro X that works on OS Mountain Lion?

I just downgraded my laptop to its original OS (Lion) and will be upgrading soon to Mountain Lion because this laptop is too old to work with Mavericks or Yosemeti. So far Final Cut Pro X, Motion and Compressor (which I had originally purchased when I first bought the computer) do not work. Will Final Cut Pro X work on Mountain Lion? If not, what can I do to get a version that will work?
Thanks!

10.0.9 is the latest version compatible with Mountain Lion. I found this article which may help you:
http://thefcpxeditor.tumblr.com/post/70885235923/what-i-can-run-fcp-x-10-1-and-1 0-0-9-on-the-same
At the time it was written it was apparently possible to download from the app store with a computer running ML. Maybe this is still the case.
FCP 10.1. has video requirements which are not met by older machines. I'm not sue about 10.0.9 but that might possibly be a 'gotcha'
I'm a bit confused though since if you downgraded you laptop to Lion but Mountain Lion is the latest OS it will run then you must have been running ML already
Geoff.

I can't export my project in Final Cut Pro X

Hey Troops. So after buying my new powerbook few months back finally have had a chance to use Final Cut Pro X. After completing my project, I went into 'FILE' clicked on 'SHARE' just see all my options greyed out. I checked to see if I needed an update and that doesn't appear to be the problem.
In past versions I would of thought I forgot to render, but with the auto render thats not the case.
Could use some help.
Cheers,
Dallas

I don't think this has anything to do with updates/
Make sure that your timeline has focus.
Also, it may well be that some of your clips has not been completely imported and still references the camera card. In that case, you can't export.
Locate the clip or clips (they may be showing a little camera badge in the browser) and do File->Import->Reimport from Camera/Archive...

I can't Export my Projects in FINAL CUT PRO X

HI Guys,
I have got the Version 10.0.3 of FINAL CUT PRO X unfortunately i can't export any projects anymore. It always says com.apple.Compressor.CompressorKit.ErrorDomain error -1. . Is there any possibility to export the project anyways, without an update? I can't update the application because my internet is too slow.
Best Regards
Johannes Rausch

You must update FCPX, how did you get your current version? You must have downloaded it from AppStore.

What are the steps for buying Final Cut Pro X and downloading a full version.i have a license certificate,but i cant be able to license the trial version

How do i download a full version of Final Cut Pro.I have the license agreement with the serial numbers.but now i am unable to license the trial.What needs to be done here.I was sent the license agreement by our Head Office

Do you refer to Final Cut Pro as part of The Final Cut Studio bundle?
Or FCP X?
The former has serial numbers, the later is a direct purchase from the Apple App Store and no serial number is required.
Al

Can I export a project from Final Cut Pro X to FCE?

Hello All,
I have the most current version of FCE and I am about to purchase FCPX. It looks like FCPX won't export to tape so that is why I want to export it to FCE and then to tape. Can this be done?
Thanks,
Mike

You can export a QuickTime Movie from FCPX. Take to movie to FCE and print to video from there.

Why can't i export projects in final cut pro x

I keep on getting this file:///Users/jackhedaya/Desktop/Screen%20Shot%202013-11-07%20at%2011.07.43%20PM .png

Have you disabled App Nap for FCP X & Compressor? Why haven't you updated to 10.1.1? It is working very smoothly for me - but I have a top 'O the Line latest IMac. How old is your computer? Is it too old for the altest FCP X?

I've recently messed up my Mac OS X Lion by deleting Aperture, but I need to get my data out of the computer. And by the way, I've got an important project in Final Cut Pro X. Is there any way I can back it up (including fxs and positions of the clip) ?

Hello everyone
I've recently messed up my Mac OS X Lion by deleting Aperture, but I need to get my data out of the computer. I've tried to repair it using DU, but it said I needed to backup all my data and reinstall the OS. How do I backup my data to an external drive?
And by the way, I've got an important project in Final Cut Pro X. Is there any way I can back it up (including fxs and positions of the clip) ?
Hope you guys can help me!

You need to back up 2 folders, Final Cut Events and Final Cut Projects which by default are located on your Movies Folder. You can always check by clicking on a clip inside Fianl Cut X and selecting Show in Finder in the contextual menu for the selected clip.

I updated to yosemite os and was in the middle of a project with final cut pro 10. Now it says final cut pro is incompatible. How can I access my project and/or update final cut?

I updated to yosemite os and was in the middle of a project with final cut pro 10. Now it says final cut pro is incompatible. How can I access my project and/or update final cut?

There is this offer of a trial version FC Pro X with 30 day runtime:
http://www.apple.com/final-cut-pro/trial/
Too bad you didn't have a complete backup that could run the previous OS X
and then you could resume using an earlier Final Cut Pro (10) or (7) since a
clone would have been a means toward that position.
http://www.apple.com/support/finalcutpro/
http://www.apple.com/support/pro-apps/
This appears to be another good reason to check out all the reasons why one
would want or need to upgrade a working OS X version, since these kinds of
events are known to happen as a direct result.
Sorry to not have an answer to this, other than try & use the Trial version...
Or see if someone at Apple sales/support can field your issue w/ an answer.
Good luck & happy computing!

HT4926 I started editing my project in Final Cut Pro trial, then purchased the full app. Now I can't find my project. What gives?

I started editing my project in Final Cut Pro trial, then purchased the full app. Now I can't find my project. What gives?

Did you by any chance move the Events and/or Projects folders? Are they on an exteranl hard drive and it is now not plugged in?

Can I migrate an iMovie project to final cut pro and keep the edits intact?

can I migrate an iMovie project to final cut pro and keep the edits intact? It may be a solution to my apparently corrupted iMovie

The manual tells ..
http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver41812c7c
keep in mind: just the 'plain cuts', not the eye-candy iMovie offers, wil be transfered.
unfortunately it says ...:
You initiate the process from within iMovie. The project file and the media used in the project are copied to your Final Cut Pro library.
For more information, see iMovie Help.
so, if your iM doesn't work anymore, you can not transfer.
plus, my personal opinion!, I would start from scratch in FCPx...
What issues in iM do you expect FCPX to solve,...?

Hi, I accidentally deleted a project in trash. How do I get it back into final cut pro X. It is still sitting in trash,

Hi, I accidentally deleted a project in trash. How do I get it back into final cut pro X. It is still sitting in trash.

If your working on an external hard drive, just drag/drop back in the Final Cut Projects folder, and re-open FCPX

My Final Cut sound effects don't show up, how can I get them?, My Final Cut sound effects don't show up, how can I get them?

My Final Cut sound effects don't show up, how can I get them?, My Final Cut sound effects don't show up, how can I get them?

Have you downloaded them?
Incidentally, you seem to have a bad echo.

HT5103 How can I open Final Cut Express project in Final Cut Pro X?

How can I open Final Cut Express project in Final Cut Pro X?

If you export the project from FCE you can import the QuickTime into FCP. You can do limited work to it like adding titles.

Command to Export project as Final Cut Pro XML from jsx script

Hi All,
Can somebody get me the command to export the project as final cut pro xml from jsx script.
I was using the extension builder script earlier for cs6 panel development, so we were using pjct.exportFinalCutProXML("pathname");
Now I am working for panel in Premiere CC so working on HTML 5 panel and qe dom scripting(.jsx).
In some jsx examples i got there is script to export sequence as final cut pro xml but cannot get the code for project export.
project.activeSequence.exportAsFinalCutProXML(entire_out_path);
Also please let me know if there are any kind of reference available about all the functions and properties in the pe dom scripting for premiere pro cc.
I am using premiere pro cc 7.1, windows 7, Eclipse Kepler.
Thanks in advance,
Anoop NR

When you reimport the exported project XML to FCP, do you get the full project or just the single bin/sequence? If you get the full project then it sounds like you need Premiere help, not FCP help ... have you tried asking on the Adobe forums? If you only get the single bin/sequence then it seems you might have inadvertently selected those prior to creating the project export. Try making sure that your FCP Browser window is active and that you have not selected anything within that window prior to using the File > Export > XML command. If that still causes issue then you might try using an earlier FCP XML version.
Hope it helps
Andy

I can't get my projects in Final Cut Pro X to work in 1080p. One turned out to be 1080p but I did everything the same as the ones that did not. ***? Any ideas?

Similar Messages

Maybe you are looking for