I can't log on to other user accounts.

Just recently I've had a problem logging on to other user accounts.
I can long on the the master account... but when I try to log on to other accounts I can't past the "initializing" progress bar, it just keeps going.
Anyone have any ideas?
Powerbook G4 Mac OS X (10.3.9)

adm is the OPERATING SYSTEM user, you can´t login to the SAP instance with that user.
Check the official IDES installation documentation, you will find there the user to login in client 800.
Markus

Similar Messages

After Using Migration Assistant Can't Log On With That User Account

I used Migration Assistant to move only my Settings and Users from my Power PC (User name RLE 5) to my Mac Pro. Because of what I have read in these forums I did not migrate applications or and files/folders. I will do that manually. After migrating I tried logging in to my user account RLE 5 on my Mac Pro, but it is telling me I am using the wrong password. I used the same password I used on my Power PC, but with no luck. On my Mac Pro I went into System Preferences>Accounts>RLE 5 account and changed the password. I then rebooted and tried again. No luck.
Can somebody help me with this problem?
Thank you.

Hi jenaS, sorry to hear that you're havig an issue after refresh of the system, if ur logged in using a live account it shouldnt change or remove the pin, if you are usin a local account the issue there might be in the profile on the system it might be corrupted, do you have a screen shot of the issue?
Dont fake the funk............

Can't log on to my user account after refreshing lenovo ideapad u310.

I was having a problem with my network connection where it worked for the desktop but not for any apps that require the network so i started to refresh my laptop to reset anything that i may have downloaded that was affecting it. By refreshing it it removed my update to 8.1 which i was aware of before i started to refresh the laptop. Now when it asks for my microsoft account password and i enter in my CORRECT password it says that it is incorrect. I have even tried to enter my pin that i had on the laptop along with the actual account password and it just says it is an old pin and that i have to enter the new one. I never replaced it and am assuming that refreshing the laptop caused somekind of replacment of pin. But how do i recover access to my laptop? It wont allow me in without a pin or password...

Hi jenaS, sorry to hear that you're havig an issue after refresh of the system, if ur logged in using a live account it shouldnt change or remove the pin, if you are usin a local account the issue there might be in the profile on the system it might be corrupted, do you have a screen shot of the issue?
Dont fake the funk............

Can't Open ITunes in Other User Accounts

Since the last ITunes update, I can open ITunes just fine in my Login. My wife cannot in her login. I don't know if this is simply a coincidence, but I don't know. When my wife tries to open ITunes, a message pops up, Installing ITunes, then Gathering Necessary Information, and after about 30 seconds to a minute, looks like it exits installer, and then nothing. Itunes does not open. In my account, it opens just fine. I have tried uninstalling Itunes and re-installing, deleting ITunes from the registry and re-installing, but always get the same result. I can use it from my user ID, but not my wife's. This is the case even when I uninstall ITunes, then install it from my wife's user ID. If anyone knows how to resolve this issue, I'd appreciate the solution. My wife has a nano that she has had since Christmas, and is perplexed at this latest turn of events...as am I. Thanks.

Update your .netframe work to version 4 (see other help posts by apple support)
Follow the instructions on this link, basically un-install everything, remove programs that says they are made by apple inc. (using add remove program)
http://www.reimageplus.com/fix-windows-127-error/ (Many thanks to reimageplus.com)
You will also need to check and verify that the following folders have been removed:
C:\Program Files\Bonjour
C:\Program Files\Common Files\Apple
C:\Program Files\iTunes
C:\Program Files\iPod
C:\Program Files\QuickTime
C:\Windows\System32\QuickTime
C:\Windows\System32\QuickTimeVR
dont forget to remove icloud also
you dont need to delete your itune music library though
If any of these folders still exist, delete them along with their contents. (if you cant delete them, right click and go to properties and then security and change the control of the fold to you)
do this for files under program files and program file (x86) on your computer
once you have deleted everything, restart your computer. Then I repaired my registry using a registry repair program.
Important:- instead of installing itunes I installed quick time, which installs apple application support (this is the corrupt file which is causing all the issues)
i then installed itunes and it all worked fine,
should take no longer than half hour to fix
hope this helps

Cannot login to other user accounts via Terminal

Hi. I'm a Unix newb. I am reading Mac OS X Support Essentials and I'm a little stuck on the command line chapter. There is a command that just does not work for me.
I am an Administrator using an Administrator account. I am using bash Terminal and trying to login to another user's account (also mine) on the same Mac using +sudo username+. The password prompt appears and I type the user's password. It throws back "Sorry, try again." I'm not sure if I am supposed to use the user's password or my admin password so I also tried my password. The response is
sudo: username: command not found
Is there a permission problem or something? I logged into the other user accounts in the GUI. I have the right passwords.
Thanks in advance.
Gary

Note that this topic would be better posted over on the [Unix forum|http://discussions.apple.com/forum.jspa?forumID=735]. I'll ask the moderators to move it over there, so don't be surprised if it moves.
That said, sudo stands for "super user do", and is used to identify some action to take as another user or as root. A username is not an action, so "sudo username" is not a valid command. If you have a particular command that you wish to execute with root permissions, you do something like this:
sudo ls -al /Users/anotheruser/Documents/
This lets you view the contents of another user's Documents folder. You can also execute commands as a specific user (though I've never tried this) using something like:
sudo -u anotheruser ls -al /Users/anotheruser/Documents/
I'm not sure if this answers your question or not...

I have an iMac with OS Lion. The Smartart feature for Office for Mac will not work when I am logged on to my personal user account. It works with other user accounts on the same computer, and it works after "safe start". How can I fix the problem?

The Smartart feature of Office for Mac will not work in my user account. It works for all other user accounts on the same computer, and it works after a "safe start". How can I fix the problem?

You may also want to search/ask in the forums run by the people who make the product which is causing you problems:
http://answers.microsoft.com/en-us/mac/forum/macoffice2011

The account application created using can see current Blank Site page but no other user account see current page only some old page?

Hello Community
    Using Sharepoint 2010 Server and the UI, building an intranet
starting with a Blank Site and then adding subsites can be accomplished.
    However, in this case the current Blank Site page that was created only shows
when logged in using the account that the application was created under.
    Any other account used to login with when the url is typed into the
address bar does not show the current Blank Site page.
   Instead when using any other account the page that is returned is
some page that was created early in in the creation of the site.
    A Blank site is said to be:
        "A blank site for you to customize based on your requirements."
    I checked-in the v4.master and approved it but the problem still exists.
    Then I checked the Site Collection features under Site Collection
Administration "Active" contains:
    Sharepoint Server Publishing Infrastucture
    Sharepoint Server Standard Site Collection features
    Then I checked under Site Actions has Manage Site features "Active"
contains:
    Sharepoint Server Publishing
    Sharepoint server Standard Site features
    It is said that maybe the page needs to be "Published". Basically
this is a Blank Site page so when the instructions says:
   "To publish a page, on the page that you are editing, on the
Page Editing toolbar, click Publish."
    I am unable to do it because when I:
       "Edit Page"
    There is not no option on the ribbon to choose "Publish".
    Neither did I see the "Publish"option when editing the v4.master in SPD.
    In summary, when logged in with the account that everything was created
under I can see the current Blank Site with the Lists and everthing else
on the page but how come when I login with any other user account
I don't see the current Blank Site page but instead see some old page that
I may have created earlier when creating the application?
    Thank you
    Shabeaut

Hello Community
    I think it is worth mentioning that the Top Link Bar shows what appears
on the current Blank Site page but it is the OOTB NoteBoard and Discussion Board
List which both reside in Left web part on the Blank Site page that has been replaced
on the page by what had been in an old Content Editor web part during early creation.
    How can I grant permissions to the OOTB NoteBoard and the Discussion Board List
that would allow other user accounts to see them, thus making the entire current Blank Site page
visible other user accounts?
    Thank you
    Shabeaut

Can't log into my main user acct! How can I fix this? Help, I'm stumped!

OK, here's the problem. While using my machine with VMware, I got the beachball of death. Nothing would respond and no keystrokes would bring up force quit. I finally had to press and hold start to shutdown.
When I restarted my machine first the grey screen came up and then a grey progress line was shown and finally completed. After that, the regular log in screen came up.
Here is where the problem begins. When I go to log in, (enter my password) it pauses briefly and then a blue screen comes up for a moment, and then it returns to the log in screen. This is a never ending cycle and the same thing happens if I shutdown and restart.
I can however log in into the guest account OK
Here's what I've done so far. Opened Disk Utility from guest acct and repaired permissions and reset PRAM. So far no luck,
If all attempts to log in fail, can I access my main user files from the guest account? I suppose if I have to reload everything I can restart in Target mode and get everything off to an external HD.
Please, if you have any suggestions, please let me know! Thanks!!!
Dan

If all attempts to log in fail, can I access my main user files from the guest account?
You might not want to enable the Guest Account...
http://discussions.apple.com/thread.jspa?messageID=10356195&#10356195
http://www.osnews.com/story/22328/GuestAccount_Bug_in_Snow_Leopard_Causes_DataLoss
http://www.macobserver.com/tmo/article/snowleopard_guest_account_wiping_some_homedirectories/

How come nobody can log in to a user account?

10.6 Server functioning well in all configured aspects. Did a software update. I don't think it was an important one, perhaps Safari and iTunes which I did just because I always do all the updates. Then, I used Disk Utility to repair permissions. Again, just because some say that you should, and it has never caused me any problems.
Instant disaster! Now nobody can log in to a user account to access any network home folders. All users can log in and access the Wiki service as normal. And I can log in via ARD and use Server Admin and Workgroup Manager. But no luck with users accessing the homes.
I suspect inappropriate permissions at or near the top of my Users directory, but I am not sure. First of all, what may have happened, and then how can I solve this problem???

I have no idea what may have happened (surely nothing SHOULD have), and I'm pretty much a novice (especially with NetBoot), but did you check in...
- Workgroup Manager: User/'Basic' tab/"User can" access account
- Server Admin: NetBoot (and NFS or Web) is running
To check permissions 'at or near the top of the Users directory', use ServerAdmin/AFP/Sharepoints/Browse then click on the permissions tab and double-click the user/group name. Or select the user/group and click the gear icon below for more ways to cause trouble!
Apologies if you knew all this already.

Can't open Firefox or IE in other user accounts.

I am using, from the dock, Safari, Firefox 1.5 and IE 5.2.3 without any problems. However I have two other user accounts (family) who can use Safari but cannot open Firefox or IE-all they get is the bouncing icon in the
dock (no message windows). The only way out of this to force quit. We had been using all three browsers without any problems for a long time in each user account.
This problem I can only link to the latest Security Upgrade 2005.09. Is there a link or is it just coincidental.
Have run Disk Utility and repaired Permissions numerous times without any success solving the problem. Is there a solution anyone can offer?
Help appreciated.
Jimjam
1.25GHz G4 MDD Mac OS X (10.3.9) Memory: 1GB
1.25GHz G4 MDD Mac OS X (10.3.9) Memory: 1GB

Hi tharmsen ,
Could I have something messed up in a setting someplace? Argh... so frustrating!
I wondered the same, but i never did get an answer,so i do not know.
I had similar issues with the 1.5 version, i certainly understand your
frustration, i wanted to send it to space!!! i had to remove it.
I am sticking with Safari which I love. Also if Debug enable in menu bar
Safari can emulate a few browsers.
just be aware that there are some issues with the earlier versions of FF,
here is an link i found when i considered going back to the 1.0.4 .
that i was trying to update.
http://www.pcworld.com/news/article/0,aid,123910,00.asp#
Just wanted to let you know.
enjoy your mac! & Apple Discussions.
regards, Eme
Message was edited by: Eme~~>>>the first time you run it, starts up, then shuts down then after a few seconds starts up again <<<as mentioned by others, also did the same for me.

- i updated my iphone 4 software on my other itunes library that is on my other user account on my laptop. my ringtones are not on my phone now but i see them in my library, but my phone is not synced to that library. how can i get my ringtones back ?

- i updated my iphone 4 software on my other itunes library that is on my other user account on my laptop. my ringtones are not on my phone now but i see them in my library, but my phone is not synced to that library. how can i get my ringtones back without having to sync my phone to the library where my ringtones are and possibly lose everything on my phone ?

From my post on what seems like the same issue (found here: https://discussions.apple.com/message/21087892#21087892)
Take the following steps:
1) while connected to wifi, toggle off then back on the Show All Music and iTunes Match options shown in my original post. Important: I did this step before, but wasn't connected to wifi, and my music disappeared. Subsequently, I connected to wifi and turned off and then back on those options and everything came back though it was grayed out and my only option was to download music.
2) To get streaming over cellular back, go into Settings>General>Cellular and scroll down to the "Use Cellular Data for:" options and make sure the iTunes option is set to 'On'
The above steps will bring back the streaming capability which seemed to go away when you update to 6.1. It didn't ACTUALLY go away, but something about the update toggled off the iTunes option in step 2 above.
I did a final test by turning off wifi, opening Music app and selecting a song. It played successfully without downloading! Crossing my fingers, but I think I'm good to go!
Hope this helps!

Can't move iWeb domaine to my other user account

When I copy my iWeb domaine to my other user account on my iMac by dropping it into idrop it only seems to work for awhile, then by the end of the day it's gone. Very strange.

Not familiar with iDropd and how it works. Just copy the domain.sites file to the new Mac and place it wherever you want. The default location is in the User/Library/Application Support/iWeb folder.
In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or Mountain Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

HT201250 Will the automatic backups backup the entire disk (even other user accounts), when I'm not logged into those accounts?

Will the automatic backups backup the entire disk (even other user accounts), when I'm not logged into those accounts?
I want to be assured that my back up is working completely. What if my MacBookPro auto-logs off my account during the backup due to no activity? Or, is the backup considered activity and it won't log off?
What about the Energy saving options - will they affect the backup ?

FOTO123456 wrote:
Will the automatic backups backup the entire disk (even other user accounts), when I'm not logged into those accounts?
Assuming you mean via Time Machine, yup. It backs up your entire system, including all user accounts (unless you specifically exclude things).
What if my MacBookPro auto-logs off my account during the backup due to no activity? Or, is the backup considered activity and it won't log off?
I've never tried it, but the backups run as the "root" user, so will probably continue. If they don't, it's not a problem, as the next backup will "catch up" with all changes.
What about the Energy saving options - will they affect the backup ?
Not really. If you have the Mac set to shut down at a particular time, that will of course interrupt a backup if one is running. But again, the next backup will catch up.

If I try to log in to my Hotmail account in Firefox, Hotmail says my Hotmail account doesn't exist, while I can problemlessly log in in other browsers

When I open Hotmail in Firefox and try to log in, Hotmail says my account doesn't exist. But I can problemlessly log in in other browsers, so I'm sure there's no problem with my account. Further, I'm absolutely sure I didn't misspell anything. Before this problem occured, I've always been able to log in to my Hotmail account in Firefox. I've already tried clearing my cookies and history, but it still doesn't work.

Do you have stored any form fill data or passwords for live.login.com?
Use these steps to remove saved (form) data from a drop down list:
#Click the (empty) input field on the web page to open the drop down list
#Highlight an entry in the drop down list
#Press the Delete key (on Mac: Shift+Delete) to remove it.
*http://kb.mozillazine.org/Deleting_autocomplete_entries
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Which security software (firewall, anti-virus) do you have?

Can I share documents with other users with iCloud as opposed to MobileMe?

Can I share documents with other users with iCloud as opposed to MobileMe?

No. iCloud provides no equivalent of the iDisk; it's designed for syncing calendars, email, bookmarks, contacts, photos a iWork (only, so far) documents between your Mac(s) and iPhone/iPod/iPad. The data is not accessible to anyone else.
For file storage and sharing you will need a third-party solution - this page examines some options:
http://rfwilmut.net/migrate3

I can't log on to other user accounts.

Similar Messages

Maybe you are looking for