I can't query VMs on the hyper-v replica server 2012

Hi,
using the command get-vm -> no result..
get-vm test2012
get-vm : The parameter is not valid. Hyper-V was unable to find a virtual machine with name test2012.
At line:1 char:1
+ get-vm test2012
+ ~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : InvalidArgument: (test2012:String) [Get-VM], VirtualizationInvalidArgumentExce
   ption
    + FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.GetVMCommand
Ramy Shaker

You did not elevate your command prompt or you don't have permissions.
But the end result in those cases is usually a silent empty return.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Similar Messages

Does GT60-ONC support Hyper-V (Windows Server 2012)??

Does GT60-ONC support Hyper-V (Windows Server 2012)??
I own GT60-ONC bought in Thailand.
I remove windows 8 and install Windows Server 2012.
I want to install Hyper-V feature.
But I cannot see any option to enable virtualization from BIOS.
my current BIOS info.. is
MSIHQ: Information detected by MSIHQ Tool ver: 1.25g
MSIHQ: Report generated in Tue 04/29/2014 at 11:50:02.71
Mainboard: MS-16F3
PCB Version: REV:1.0
BIOS Version: E16F3IMS.10C
BIOS Date: 4/26/2012
EC-FW Version:
please help .........
///

You are using Hyper-V server and not Hyper-V on Windows Sever.
Hyper-V server is free, but it only includes the Hypervisor and no GUI (Only for managing Hyper-V)
what's your physical machine OS ?
If it's Windows 8 or 8.1 then you can enable the Hyper-V management tools (Programs and features, Turn On/off Windows Features, Hyper-V, Hyper-V management tools). Then open the Hyper-V console and connect to your Hyper-V server.
Regards, Samir Farhat Infrastructure and Virtualization Consultant || Virtualization, Cloud, Azure ? Follow and Ask here https://buildwindows.wordpress.com

Remote Desktop Connection Manager can only open 6 sessions at a time on Server 2012

I am only able to open, and view thumbnails, for a maximum of 6 RDP sessions on my Server 2012 box at a time in Remote Desktop Connection Manager (RDCM). If I add more sessions I just get a variety of connection errors for the additional sessions. If I activate
a 7th session one of the existing 6 sessions goes off-line with a connection error message. Sometimes the error says 3334, sometimes the error says 0x8345000E, and sometimes it just says there is a connection error.
I have checked Group Policy on the server to ensure I don't have any settings restricting the number of RDP sessions.
In fact, I will often have 30 or 40 RDP simultaneous sessions opened, I am just not able to view them all in RDCM. I have seen reviews of RDCM with screenshots showing dozens of thumbnails so it seems to be something that's possible to do.
Are there any settings I should make on the server to allow RDCM to connect to more than 6 simultaneous RDP sessions?
Just to be clear, all these RDP sessions are running on the same server. Also, I am just using the trial license for Server 2012 and Remote Desktop Services right now. I don't think that should have an impact, but I wanted to be thorough.

Thanks Jakub for "corflags" info.
Unfortunatelly it doesn't work because running mRemoteNG.exe process in 64bit can't load MSTSC ActiveX component (referenced assemblies) because original files were assembled from 32bit dll [mstscax.dll]?
Error message when making RDP connection:
Could not load file or assembly 'Interop.MSTSCLib, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. An attempt was made to load a program with an incorrect format.
I was able to create new AxInterop.MSTSCLib.dll and Interop.MSTSCLib.dll assemblies from 64bit dll version and now it works with "AnyCPU":-)
http://www.filedropper.com/axinteropmstsclib-mremoteng
Using AxImp.exe and TlbImp.exe didn't worked for me because it creates assemblies in wrong namespace "MSTSCLib" instead of "Interop.MSTSCLib" (AxImp.exe) and TlbImp.exe for changing namespace generated many "marshaled errors"
so final .dll wasn't working.
Adding MSTSCAX.dll reference in Visual Studio directly created correct and functional assemblies. Who don't know how to create 64bit compatible assemblies or don't have Visual Studio, feel free to check linked file.
Hope it helps
P.S. Sorry for possible technical misinterpretation, I am not programmer so creating new assemblies was trial-error process...

Can i install Adobe Design Standard CS3 on a Server 2012 R2

Will be updating Adobe Design Standard server currently on Server 2003 Std to Server 2012 R2 Std. 64 bit. Can I still install Adobe Design Std CS3 on the new server? If not then suggest the versions compatible with Server 2012 R2 Std.

Ask in the ID forum.
Mylenium

Now there is no available of windows server 2008 R2 64bit download. so i want to know the equivelent product in server 2012?

now there is no available of windows server 2008 R2 64bit download. so i want to know the equivelent product in server 2012?

Hi,
Windows 2008 R2 and Windows 2012 are not equivelent product, there are many new features in Windows 2012, and Windows Server 2008 R2 Evaluation (180 days) still availabe:
http://www.microsoft.com/en-us/download/details.aspx?id=11093
Regards,
Yan Li
Yan Li
TechNet Community Support

What is the difference between SQL Server 2012 R2 & SQL Server 2014

Hi all,
I am using SQL Server from last 3 years. I started SQL Server 2008 R2. Now I am using SQL Server 2012. I want to change my development environment to SQL Server 2012 R2. But suddenly I saw that SQL Server 2014 is released. I want to know what are the
differences between SQL Server 2012 R2 & SQL Server 2014. Are both those are the same or different products?
I searched through the Internet but I didn't find any article regarding that. So could someone help me to solve this matter?
Thanks,
Regards,
Chiranthaka

differences between SQL Server 2012 R2 & SQL Server 2014.
We don't have a Version "SQL Server 2012 R2", only 2005, 2008, 2008R2, 2012 and 2014.
See MSDN What's New in SQL Server 2014
Olaf Helper
[ Blog] [ Xing] [ MVP]

How Can we force the Hyper-V Replica to use a dedicated network between two hyper-v hosts?

Dear Team,
How can we force Hyper-V Replica to use a dedicated network between two hyper-v hosts?
For live migration, we can choose the desired network in Hyper-V Manager (Use these IP addresses for Live Migration).
I have two 10G adapters teamed together, the virtual switch is created on top as converged network with several vNICs (MangementOS, LiveMigratrion, Backup, etc...)
Each network is set with a specific VLAN to isolate the traffic.
The two Hyper-V hosts are on the same LAN and domain.
Thank you.
Regards,

I have accomplished this by using a DNS pointer specifying an IP address on that dedicated network. That will force traffic done that network.
John Johnston

I have set up a Time Warner email account in Mac Mail but can't send email because the Road Runner SMPT server is "offline." How can this be resolved? ecause the Road Runner SMPT server is offline. How can I resolve this problem?

I have set up a Time Warner email account in Mac Mail but can't send email with this account because the Road Runner SMPT server is "offline." How can this be resolved?

Is this any help?
http://www.timewarnercable.com/en/residential-home/support/faqs/faqs-internet/e- mailacco/how-do-i-set-up-my-twc-mail-for-mac-osx.html
The receiving email ports are:
IMAP is port 143
IMAP-SSL is port 993
POP is port 110
POP-SSL is port 995
Outgoing ports are...
SMTP and SMTP-SSL is on ports 25, 587 and 465. Port 587 has to be SSL, and port 465 is enforced TLS-wrapped and is generally used by Outlook users.

Can anyone send/post me the code for RTP server which reads soundcard

hi all,
can anyone send me the code for RTP server which reads soundcard and RTP client to tranmit the sound.

How much are you going to pay?

My Macbook Air just shows the lit screen with nothing on it. The mouse does not respond. Nor does the screen change. How can I reset to get the Air working again. 2012 model with the latest software updates.

My Macbook Air is totally unresposive once it is turned on. It has 256 GB of flash memory. No mouse cursor; the keyboard has no effect. Running the battery down and then plugging in does not fix this. What can I do to get the Air back?

Have you tried to recover your Mac?
Boot and hold Cmd-R until the recovery screen appears. Follow the prompts. This will reinstall everything over the internet - you do not need any installation media.
You do have a backup of your data, right?

Can't update my Iphone (the iphone software update server could not be contacted)

Hello,
I've been trying to fix this problem by my self with no luck so I'm writing to you guys, hoping you will have the right answers.
I dropped my iPhone4 today and it turned off, when I plugged it into a charger it showed me a screen of IOS6 (which I didn't had this update updated) and when I "silde right" it wrote that I need to update it by iTunes.
So I opened ITunes while my IPhone was connected that it automatically tried to update it as needed, after 20 seconds of loading I get this error massage:
"the iPhone software update server could not be contacted"
I've tried everything; turning off firewall, update my AntiVirus,restarting my router, restarting pc while IPhone not\connected, changed usb exist (using a back exit atm),changing usb cable and even reinstalled my iTunes (yes, my iTunes is up to date), although when I tried to update my itunes it gives me this error:
"The iTunes update server could not be connacted. Please chek your Internet connection, or try again later. " but I don't think it's related but worth to mention it.
My iPhone is NOT jailbreaked
please help me to fix this problem,
Thanks In Advnace.

Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.

Can't able to access the internet in window server 2003 sp2 64bit.

Hi,
recently i installed , windows server 2003sp2 64bit, every thing was perfect expect, internet.
Ican't access the internet in that server, i tried to update the LAN drives but no use, I tired t install Adapter drives no use.
What i have to do now,
Thanks in advance,
Surnedra Mannem.

Hi
Is this server in a domain or stand alone?
Are you plugging the server direct in to the Internet Router or via Switches?
What is the status of the Network Adapter Connected, Disconnected or Limited?
Could you please tell us what is the IP address you are getting on the server?
Try turning off the firewall also what browser are you using to access the internet on the server.
Thanks

Unable to start guest OS in Hyper-V on Server 2012 R2

I get the following error trying to start any guest OS in Hyper-V Manager:
"An error occurred while attempting to start the selected virtual machine(s)::
'TestVM' failed to start.
Virtual Machine 'TestVM' could not be started because the hypervisor is not running.
'TestVM' failed to start. (Virtual machine ID xxxxxxxxxxxx)
Virtual machine 'TestVM' could not be started because the hypervisor is not running (Virtual machine ID xxxxxxxxxxxx).
The following actions may help you resolve the problem:
1) Verify that the processor of the physical computer has a supported version of hardware-assisted virtualization.
2) Verify that hardware-assisted virtualization and hardware-assisted data execution protection are enabled in the BIOS of the physical computer. (If you edit the BIOS to enable either setting, you must turn off the power to the physical computer and then
turn it back on. Resetting the physical computer is not sufficient.)
2) If you have made changes to the Boot Configuration Data store, review these changes to ensure that the hypervisor is configured to launch automatically."
Host (Physical) Hardware:
- Supermicro X9SRL-F, BIOS Rev 3.0a (current) with Intel Virtualization enabled and Execute Disable Bit enabled
supermicro.com/products/motherboard/Xeon/C600/X9SRL-F.cfm
- Intel Xeon E5-2620 CPU
http://ark.intel.com/products/64594/Intel-Xeon-Processor-E5-2620-15M-Cache-2_00-GHz-7_20-GTs-Intel-QPI
- 96GB ECC DDR3 RAM
Host Software:
- Server 2012 R2 DataCentre with update 1 (clean install)
- Hyper-V role installed
All hardware supports virtualization and was previously running VMWare VSphere 5.5 without problem.
The BIOS settings for Intel Virtualization and Execute Disable Bit are both enabled.
The server has been physically shutdown and powered off numerous times, but still doesn't work.
I've read Ben Armstrong's notes on setting the Hypervisor Launch type in BCDEdit
Here's the current Boot Configuration Data
Windows Boot Manager
identifier {bootmgr}
device partition=\Device\HarddiskVolume8
path \EFI\MICROSOFT\BOOT\BOOTMGFW.EFI
description Windows Boot Manager
locale en-US
inherit {globalsettings}
bootshutdowndisabled Yes
default {current}
resumeobject {06bff081-9477-11e4-ab74-9faf6fe9d444}
displayorder {current}
toolsdisplayorder {memdiag}
timeout 30
Windows Boot Loader
identifier {current}
device partition=C:
path \Windows\system32\winload.efi
description Windows Server 2012 R2
locale en-US
inherit {bootloadersettings}
recoverysequence {06bff083-9477-11e4-ab74-9faf6fe9d444}
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice partition=C:
systemroot \Windows
resumeobject {06bff081-9477-11e4-ab74-9faf6fe9d444}
nx OptOut
hypervisorlaunchtype Auto
Here's my System Info:
OS Name Microsoft Windows Server 2012 R2 Datacenter
Version 6.3.9600 Build 9600
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name HYPER1
System Manufacturer Supermicro
System Model X9SRL-F
System Type x64-based PC
System SKU To be filled by O.E.M.
Processor Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz, 2001 Mhz, 6 Core(s), 12 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. 3.0a, 5/12/2013
SMBIOS Version 2.7
Embedded Controller Version 255.255
BIOS Mode UEFI
BaseBoard Manufacturer Supermicro
BaseBoard Model Not Available
BaseBoard Name Base Board
Platform Role Workstation
Secure Boot State Unsupported
PCR7 Configuration Not Available
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume8
Locale Australia
Hardware Abstraction Layer Version = "6.3.9600.17196"
User Name Not Available
Time Zone AUS Eastern Daylight Time
Installed Physical Memory (RAM) 96.0 GB
Total Physical Memory 96.0 GB
Available Physical Memory 93.0 GB
Total Virtual Memory 110 GB
Available Virtual Memory 107 GB
Page File Space 14.0 GB
Page File C:\pagefile.sys
Hyper-V - VM Monitor Mode Extensions
Yes
Hyper-V - Second Level Address Translation Extensions
Yes
Hyper-V - Virtualization Enabled in Firmware
Yes
Hyper-V - Data Execution Protection
Yes
I do have the following two errors in the Hyper-V server role event log that occur at system startup, but can't find any info on it:
Log Name: System
Source: Microsoft-Windows-Hyper-V-Hypervisor
Date: 12/01/2015 3:35:37 PM
Event ID: 63
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: HYPER1
Description:
Hypervisor launch failed; The hypervisor was unable to initialize successfully (phase 0x5), and was not started. This initialization failure may be the result of a platform configuration or firmware issue. Contact your system vendor for more
information or updated firmware.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-Hypervisor" Guid="{52FC89F8-995E-434C-A91E-199986449890}" />
<EventID>63</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2015-01-12T04:35:37.814579300Z" />
<EventRecordID>3955</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="8" />
<Channel>System</Channel>
<Computer>HYPER1</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="Phase">0x5</Data>
</EventData>
</Event>
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 13/01/2015 11:21:23 AM
Event ID: 15350
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: HYPER1
Description:
The virtualization infrastructure driver (VID) is not running.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
<EventID>15350</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2015-01-13T00:21:23.250980100Z" />
<EventRecordID>181</EventRecordID>
<Correlation />
<Execution ProcessID="1512" ThreadID="1576" />
<Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
<Computer>HYPER1</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
</VmlEventLog>
</UserData>
</Event>
I've also read a number of other threads that haven't assisted including:
- https://social.technet.microsoft.com/Forums/en-US/396c882f-2cc8-4bc8-804d-eec75c0b8066/virtual-machine-could-not-be-started-because-the-hypervisor-is-not-running
- https://social.technet.microsoft.com/Forums/windowsserver/en-US/85b323a8-9233-49b9-bc38-e28e7a4222c6/server-2008-hypervisor
There is no event ID 3112 in the event log, so this MS KB article (2490458) is not relevant
Following pics attached show BIOS settings for CPU and Virtualization / Execute Bit Disable settings:

I recently ran into this. The person had made a modification to the System Properties of the Windows operating system.
System Properties > Advanced > Performance > Settings ...
On the Performance Options window, select the Data Execution Prevention tab. Ensure Turn on DEP for all programs and services except those I select is the option selected. He had the other option selected. The only way to get it to get it working
was to change the setting, uninstall Hyper-V, reboot, install Hyper-V, reboot.
. : | : . : | : . tim

Hyper-V Guest Server 2012 R2 Loses Connectivity Intermittently Every Week

Hello,
We have been having this issue for some time now and getting frustrated. We have a Server 2012 R2 Host running on a HP ML350 G8. It is running a Server 2012 R2 Guest using Hyper-V. The guest OS is attached to its own NIC on the HP Server (which comes with
4 NICS built it)
Every week, the guest server seems to lose connectivity to everything. The guest server is still on but all devices on the network can no longer access the shares or even ping the server.
To fix this, the ethernet cable of the NIC connected to the guest is disconnected from the switch and then reconnected. The host server is running fine throughout.
Why does this keep happening? It seems to happen like clockwork every week Thursday afternoon!

Hi Sir,
Based on my experience , first you may need to keep the physical NIC driver up-to-date .
Also please check if there is "VMQ"/"virtual machine queue" property in advanced properties of physical NICs:
If yes please disable it for each team member then check the result .
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

How can I create a Pooled VDI infraestructure using Win server 2012 as VM image?

Hello
I have followed the "usual" way to build a pooled VDI desktop using Win7 or Win8 with success, but it fails when I use an image of Win Server 2012 as VM instead.
Am I overlooking something? Should I need to prepare the image in a different way? (Sysprep differently?)
Thanks

Dear Ryan
I think the point is other than committing a breach of licensing. I have a legitimate need to use a pooled server system, which incidentally is not going to be end user.
The "economy" of the proposed structure can make a more efficient use of the equipment.
This is an excerpt of the MS VDI Q&A:
Do I need to pay for Windows VDA if I use Windows Server as a client operating system in my virtual machine?
OR
I’ve heard that I can avoid paying for Windows VDA by using Windows Server as my VDI desktop OS. Is this true?
Running a Windows Server®
OS as the desktop in the datacenter does not require Windows VDA, but there are many reasons why a server OS should not be used as a desktop, especially in the datacenter:
The user experience with servers as the desktop is very different from using a Windows client.
Many applications for end users were written for a client OS and not a server OS. Each of your applications would need to be retested to ensure compatibility with a server OS. Additionally, most vendors
do not offer support for client applications running on servers.
Clients and servers are on different patch cycles, adding to management complexity.
Most of the VDI ecosystem will support the Windows client in the datacenter, not server OS’s.
However, if you do decide to run a server OS as the desktop, please note that you will need to pay a Remote Desktop Services Client Access License (RDS-CAL) to correctly license that scenario.

I can't query VMs on the hyper-v replica server 2012

Similar Messages

Maybe you are looking for