I can't to print a barcode with CODE128C

Hi,
I need somebody that can`t help me, I have a design report for to print barcode, and I`am using the Barcode with the file oraclebarcode.jar, When I print it, I try to read the barcode whit the reader but don`t read nothing.... This always happen if I use the constant 128_C, but when I use other for example 128 or 128B the reader read good.
Please, Somebody tell me how can I do it? Who has worked in Oracle Reports 10g with barcodes printing Code 128C?
A lot of thanks...

Backend bean scope should be set to request instead of session/application.
<managed-bean-scope>request</managed-bean-scope>

Similar Messages

Can I batch print PDF files with Adobe Acrobat Reader X

can I batch print PDF files with Adobe Acrobat Reader X? I have tried from Windows Exploer (Windows XP) and it looks like the files are opening but they do not print.
Pat

Very strange! What is your installed Reader version?
Try disabling Protected Mode in Adobe Reader [Edit | Preferences | Security (Enhanced)].

Can a C2890A printer be used with a laptop?

Can a C2890A printer be used with a HP 15-1004dx laptop?

Hi,
It's time to buy a new printer.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to print 2D barcode with SAPGOF device type

I only see some pre-defined standard barcode like BC_93, BC_C128B in the SAPGOF device type.
How can I define and print a 2D barcode like QR Code or Data Matrix with SAPGOF device type?
Please advice me. I promise to grade you.
Thanks

Hi,
Zebra printers are very good usable for printing your kind of barcode.
You can use the barcode designer of Zebra.
Below a example of ZPL code tp print your QR barcode (with explanation behind).
^XA                           "start statement
^FO100,100               "x,y position
^BQN,2,10                " set barcode
FDMM,AAC-42FS   "data to be printed as barcode
^XZ                           "sluit statement
syntax ^BQa,b,c,
a: fiedl position
b: model
c: magnification
Look in the ZPLII manual for more details
suc6
Gr., Frank

Why can't I print a book with iphoto 09?

I have a book under "keepsakes" that it says (0) next to the name of the album. But when I open it up you can see the pictures in there. I can't print the book though when I'm ready to input the number of copies that part is in gray and it won't let me choose one. I tried with another album and it doesn't work either.
Any suggestions?
Thanks

Paulina,
Sorry I don't know the answer to your question, however you may have better luck posting in the iPhoto forum, click the link and it will take your there. Then repost, that forum is where the iPhoto guru's hang out if you can't get help on this forum.

Can no longer print to hp6700 with my ipad2

I have been printing to the HP6700 printer with my ipad2 for a year now, but know I keep getting the message "the printer is busy". Any suggestions? The printer works from a computer, just not my ipad2!!!

Hi,
Try unplugging the router from its power for 30 seconds and plug it back in.
Turn off and on again both the iPad and the printer and then try printing again.
Please let me know if that helps,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Can't see printer on PC with airport extreme

I've been running an Airport Extreme for a couple of years and the printer and internet work great. Just added a PC running Vista, I have to connect to the internet on my iBook before I can connect on the PC. The PC does not see the wireless printer to add it. Have tried changing printer sharing, but that doesn't help.

Got lucky to phrase my question correctly once which lead me to iFelix posting on the proper sequencing of a TCP/IP port connection. Is that right? anyway, it worked perfectly. Thankyou iFelix!

Which vision software/hardware can i use to read barcodes with?

i have an application where i will need 4 cameras to look for the barcode on my cylindrical product which is moving down a production line.

As Michael said, this should be possible with the Vision toolbox. It includes all the standard 1-D barcode reading algorithms. However, it may become difficult for a couple of reasons.
1. The NI tools don't search for the barcode. You will have to locate them and provide the reader a box that passes through the stripes.
2. Distortion due to the camera angle may confuse the reader, unless your cameras are fairly close to horizontal.
Hardware just requires good lighting, cameras and lenses. There are dozens of combinations that should work for this application.
Bruce
Bruce Ammons
Ammons Engineering

Is there a way I get can my Dell V305 printer to work with my Mac?

I "inherited" my son's Mac Book Pro but when I tried to hook it up to our printer, Dell V305, it wouldn't work. I tried downloading the software from the Dell site, since we don't have the disks, but it wouldn't work. Is there a way I can get our printer to work with the Mac?

I would start by contacting Dell's tech support to determine if the printer is compatible. They may then be able to suggest what printer driver to use on the Mac.

How do I print a movie with a text track to video?

Hello,
How can I get the subtitles in a text track to appear on a file in iMovie or Final Cut so it can be printed to video? Or put differently, how can I render that information so it becomes a part of the video track? The best I can do is print the clip with the subtitle area intact, but the area is filled in with white. I'm using QTP7.
Thanks!

I'm not sure how to do this with Quicktime, but VideoLAN can do it by using the "soverlay" module with the output transcoder.
http://www.videolan.org/
http://www.videolan.org/doc/streaming-howto/en/ch03.html#id291629
http://forum.videolan.org/viewtopic.php?t=14570
Hope this helps

Printer that works with Airport Extreme Base Station

Hi. We are very new to Macs (2 weeks). Have a Mac Book and AEBS. Both work fine. Our HP printers, however, only work if connected directly to the Mac Book. I'm informed that we need to get a printer that works with the AEBS if we wish to have wireless printing. If anyone can recommend a printer that works with AEBS, we'd be grateful. Thanks.

Hello Jungle-cat. Welcome to the Apple Discussions!
Check out the following iFelix site to see which printers are known to work (not not) with the new 802.11n AirPort Extreme Base Station (AEBSn).

Can I use report vi print QR barcode?

When I try to use report vi to print QR barcode through Zebra s4m printer, the barcode will become to rectangle not square as expected.
If I use a laser printer, the barcode keeps in square. If any one can help me with this problem?
Thanks a lot!

This (probably) has to do with the way your Bar Code Printer interprets the data produced by LabVIEW. Are you creating an HTML document or some other format? I suspect that you'll need to get help from Zebra for this.
BS

Printing labels (barcode, datamatrix code, ...) with LabView via Codesoft

Hello together,
could anyone post a sample vi which enables printing labels (barcodes, datamatrix code, ...) with LabView
via the Teklynx Codesoft Runtime Software? There are no sample programs from Teklynx for LabView.
Many Thanks for your help, Thomas.
Message Edited by maximint on 01-04-2007 10:04 AM

maximint wrote:
Hi JLS,
thanks for the answer. I agree with you that closing the references is the best und most stable solution. But it is really slow. I made an exe but this is also slow.
But apart from this, the VI is running well, even with a handing over of variables. I guess this is one of the first VIs in the net which combines LV with
Codesoft from Teklynx.
Thanks, Thomas.
PS: I made a wrong click on the rating of your last post. Sorry. I guess I rated it too bad.
Well, this is easily solved with an intelligent global buffer VI or as they are also often called a LabVIEw 2 style global. I use them quite often for all kinds of reasons including to avoid globals in my programs almost 100% but this is one of the cases where they are also very handy.
Basically you write a VI that has a while loop, and a case structure inside. The while loop normally only executes once. One or more uninitialized shift registers store different values that can be reused on each call to that VI. The case selector is wired to an enum (I make them always strict typedefed) on the front panel and that one is connected to the connector pane of the VI.
Make the enum have init, print, close items and in the respective case frame do the opening of the refnum in the init case and anything else you need to do once at initialization time storing the refnum to the right shift register terminal. In the close case do everything to close done the software and then close the refnum coming from the right shift register terminal itself passing a Not A Refnum to the right shift register terminal. The print case uses the refnum from the right shift register terminal too, does all that is necessary to do printing and then stores the refnum back to the right shift register terminal. You now have an intelligent manager function for your interface to the printing software.
The init case is called somewhere during initialization of your application while the close case is called somwehre when you close your application. A variant is to combine the init and print case but forst test for the refnum to be Not A Refnum (comparison palette) and in that case do the initialization first, otherwise just do the printing. The advantage with this is that the Codesoft interface is only initialized if you really need it.
There is one caveat for this if you use dynamic top level VIs to implement for instance test steps or deamon like operation. LabVIEW remembers the top level VI under whom a refnum was opened and automatically closes refnums when that top level VI goes idle (stops running). So you would need to make sure that the initialization is done in the main hierarchy that is guaranteed to run for the entire time that your interface is required.
I have included a small archive containing an API for Codesoft 7 that also supports variable query and substitution in templates. It is an older version of something I'm currently using and not very well tested as is, but the newer version is a lot more involved and complicated and not suited to be put here. I also included another archive showing a version of such an intelligent manager buffer function using that API.
Rolf Kalbermatter

How can I view all comments in a Pages doc and print the doc with comments?

It seems that we can no longer view comments in the margin of a document. It is also not possible to print the document with comments visible. Anyone else having this problem? Pages 09 Help does not even offer an up-to-date explanation. "Show Comments" only shows color shading. The option “Show Comments and Changes Pane" does not even exist. How can I get the comments to print???

You will have to wait for Apple to fix this deficiency in a forthcoming update to Pages v5. Or, you could use Pages ’09 v4.3, if originally installed before the v5 upgrade, and located in /Applications/iWork '09.
Otherwise, use another solution (e.g. Office for Mac 2011, LibreOffice).

I just replaced my mac pro with an iMac and i can't get it to work with my epson stylus 3800 printer?

i just replaced my mac pro with an iMac and i can't get it to work with my epson stylus 3800 printer? i have downloaded the 3800 software three times and the imac keeps telling me there is no software to run the printer? Any help here?

Care to share which OS you are using?

I can't to print a barcode with CODE128C

Similar Messages

Maybe you are looking for