I can't turn down volume of my iphone5

I can't turn down volume of my phone using the button on the left hand side of the phone, is there a soft key that I can use instead? Thanks!

You can also activate Accessibility mode, and AssistiveTouch to create custom gestures that activate certain functions.

Similar Messages

Took phone update and now can't turn down volume all the way?

I took the latest phone system software update, and now when I turn down the volume (using the volume button on the side) the lowest it will go is vibrate instead of silent. This is annoying, because I sometimes like to turn it all the way down in meetings or when I sleep at night, but it vibrates on incoming calls or corporate e-mail notifications.
Why did you guys do away with the fully-minimized volume choice?
The Motorola Droid (Droid 1, I suppose), under the original software load, allowed you to turn down volume (in some number of steps), down to Vibrate, and then finally all the way Off. The only sound it would make would be if you set an alarm clock.
With the new load, turning it down only goes to vibrate, and not silent.
The "Silent Mode" available when pressing the power button should be more appropriately named "Vibrate Mode." It appears that there is no longer a true "silent" mode under the Droid O/S.
I looked at a number of marketplace apps, but they all seem to be based on a timer setting, i.e. set a time frame that you don't want any sounds.
Why did Verizon (or is it Google?) have to break something that didn't need fixing?

It's a known issue and has been discussed numerous times. If you need quick access, you can get beautiful silent from the market for free which will allow you have a widget on your homescreen for silent mode.

I can't turn the volume up or down on my MacBook Pro?

I can't turn the volume up or down on my MacBook Pro? It shows a kind of "stop" sign? I can get the speakers to work by connecting my headphones to the computer and choosing the sound to be on the speakers, but as soon as I take the headphones out, I can't get any sound out of the speakers..
Sometimes there is a "Red" light coming out of the AUX-port?

Hey vgamborg,
Thanks for using Apple Support Communities.
This article should help you troubleshoot issues playing sound from the built-in speakers. Try the steps listed, and I quoted a part about the red light.
Troubleshooting issues with no audio from built-in speakers on Macs
http://support.apple.com/kb/ts1574
Check to see if a red light is lit in the line-out port. If so, your Apple computer may need service.
Have a nice day,
Mario

IPhone 4S can not hear music cannot turn down volume

IPhone 4S cannot hear music playing cannot turn down volume or in control center... PLEASE HELP!!

I asked that question in regards to your comment about a red zone in volume. I do not have that on my phone.
You state that you have already done a restore, so the only other step in troubleshooting is to make an appointment at the Genius Bar to have the device checked by Apple.

HT1305 how can i turn down the fan rpm that's between the optical drive and hdd in my power mac g5 dual 2.3?

how can i turn down the fan rpm that's between the optical drive and hdd in my power mac g5 dual 2.3?

Ok, I saw that error in your logic. A Dual G5 2.3 or even a Dual Core 2.3 does NOT use LCS at all. Its air cooled and if anything if the OP is experiencing this problems could be due to possible heatsink paste drying up. He might have to re-apply MX 7 or Arctic Silver.
The only G5's that use LCS are: G5 dual 2.5 from Late 2004, the G5 Dual 2.7 from Early 2005, and lastly the G5 Quad-Core from Late 2005-end of September 2006.
Hope this helps.

How do i stop muting people during my conversations? i don't mean to hit mute but it always happens. can i turn down the sensitivity?

how do i stop muting people during my conversations? i don't mean to hit mute but it always happens. can i turn down the sensitivity?

The iPhone includes a proximity sensor which puts the screen to sleep or turns it off when the iPhone is held to your ear and face during a call.
Do you have a screen protector installed and/or are you using a case that might be blocking or partially blocking the proximity sensor?
If you are using a case, remove the case before the next call. If the same does not occur without the case, you need to get another case that doesn't block the proximity sensor.

Can you turn down color saturation?

As questioned in the subject: can you turn down color saturation in osx?
I have bought an external monitor for my Macbook, which i run trough the mini-dvi out. The screen is a nice 24" inch, but does not have an option to turn down color saturation. The colors are a bit to harsh, and i really want to turn the colors down a few notches, especially the reds. But in the built in osx calibration tool, there is not option to "turn down", the colors. I know there is a "grayscale" option in the universal access menu, but there is no slider to make a custom adjustement.
So do any of you have any suggestions?
Thanks in advance!

Ok. I am not able to send back my display, so now im stuck with a wide gamut screen. I do not want to just throw it out. There must be some way, a third-party program maybe, that can tweak the way osx shows color. I just want to desaturate the image a little, i shoud not be very difficult, but after hours of searching on google i cant find anything.
Is there a program with extended calibration features, compared to the ones system preferences?
Thanks in advance!

Can't turn the volume up on my computer.

I can't turn the volume up on my computer what esle can i tell you. that i can't turn up the volume on the computer.

Are you asking about Firefox, or the computer itself. Firefox
does not have any volume controls, except for web pages
that send audio/video to the displayed web page. If you are asking about
the computer, in Windows look next to the time display. there
should be an icon for volume control. If you don't see one,
right click on the clock or a blank area where the active icons
are displayed and then select ''Properties''. Select ''Notifications.''
Make sure ''Volume'' is on and press okay. Left click the volume
icon and then move the slider as you wish. If you right click,
you will get the full menu.

6th generation nano spontaneously turns down volume

Nano 6th gen spontaneously turns down volume. Already tried following
1. turned off shake to shuffle
2. locked volume limit at full volume
3. Did full reset
Any ideas? Sometimes appears that now playing and song selected from playlist are different, so two songs are playing at once.

Hi Rogeagle,
If you are having multiple playback issues that weren't resolved by a reset, you may want to try restoring your iPod to factory settings, then testing it with a limited number of songs to see if the issue persists. You may find the following article helpful:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
Regards,
- Brenden

Can i turn down front left and right using ddts decoder with the g500

hi want to get ddts 100 decoder for my gigaworks g500.when im watching a move i have to have it up on about 2.7 bars.to hear the center speaker then the action is to louad.i can turn down center and rear and sub but no front left and right.can you turn down front left and right using the decoder.do you still have to use the controll pod for the gigaworks if i had the decoder in or do u use the decoder to turn it up thanks plz help.

System Preference > Accessibility
Select Mouse & Trackpad in the left side box.
Double-click speed
Make it slower by dragging the pointer to the left.
Best.

Tried reset, taking off case, no Bluetooth but sound effects keeps appearing in middle of screen. If I turn down volume it goes away but then comes back. Sometimes immediately. Sometimes in 5 minutes. Am not touching anything on side of iPad at the time

Cannot get sound effects icon to stop coming on. When I turn down the volume, the icon goes off briefly and then it comes back on at full volume and stays in the middle of the screen, until I click the volume down again. Doesn't help to reset, the case is not on and it still does this. Most annoying.

Tried any basic troubleshooting steps?
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.

I connect my xbox to hp w1707 and I can't turn the volume up.

Hello. I have a HP monitor with series W1707. I'm connecting my monitor with my xbox 360. Everything is okay but I can't turn up my volume. I can only turn it down. Can anyone help me. I have no manual.

Hi zarithAD, welcome to the HP Forums. Turning the volume up does seem a little unintuitive. According to this document: Pressing the Volume Up Button Does Not Raise the Volume you must first press the '-' button to bring up the volume, and then the '+' should raise it.
Also here is the User’s Guide
I hope this helps.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Can you "Turning down" the music during Videos?

I am doing a movie of an overview of my daughter's 3rd year of life. I have a lot of photos with movies spread out here and there I may choose music that has lyrics in it and was wondering if there is a way to turn the volume down on the audio track and boost the volume on the video?
Or is it ideal to have music without lyrics in it?
Thanks,
Nik

Now, some of this will be predicated on my personal workflow.
It's really the same in PrE, though the grouping of the Audio & Video Tracks is a bit different there, than in my PrPro. Still, I always leave my AV Audio on the comparable Audio Track. [In PrE, this will be on the corresponding Audio Track, i.e Video Track 1 will have its Audio on Audio Track 1. In PrPro, the Audio Tracks are separated from the Video Tracks, and one can Rename the Tracks to suit. I Rename Audio 1 to "AV Audio."]
All music goes onto a separate Audio Track. In PrE, the SoundTrack is a good place, but one can also use the Narration Track, or even one of the Audio & Video Track, regardless of whether there is accompanying Video, i.e. Audio Track 2, though Video Track 2 is empty.
What this does is allow me to use Window>Audio Mixer to control each Audio Track separately. It also allows for some automation (more in PrPro), that is applied at the Track-level, as opposed to the Clip-level.
At the Clip-level, one can use Keyframes on the fixed Effect>Volume, to raise and lower the Gain/Volume, as is required. I like the Audio Mixer, because it is dynamic, where Keyframes will work dynamically, but are applied statically.
The exact method one uses will probably have more to do with how they like to work. While I am very comfortable with Keyframes, I come from an analog world, before digital, so the "sliders" on the Audio Mixer are more like what I grew up with - mixing panels with sliding potentiometers. I also like the automation of the Track-level Effects in Audio Mixer.
In many of my Projects, I end up with at least one AV Audio track (often more, depending on the sources) and at least one "Music Track" (usually many more). I'll also have several SFX Tracks, and in most cases, these will need to be adjusted separately, and also, many will overlap on the Timeline. I keep them separate, so I can address them at a Track-level, and not have to go into work on each Clip manually, via Keyframes.
Hope that this gives you some ideas, and good luck,
Hunt

Can't turn DOWN brightness on MBP!

This is weird: after waking my MBP from sleep, the display seems to be stuck on its BRIGHTEST setting.
I can't turn it down; when I use Function + Brightness down, the brightness icon comes up with the all the bars empty. When I press Function + Brightness up, the first leftmost segment turns on then off.
A reboot solved the problem. Anyone experience this?

Try either or both of these and see if you can turn the volume down.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Need to turn down Volume/ sensitivity of microphone on 8350i

is there a way to turn down the microphone ? everybody i talk to always tells me they can hear every little noise in backround and they said its very loud. ive never had this problem with another phone .im wondering also if the mic gets turned down if they echo issues would go away.the mic is so sensitive its probly pickin up the ear speaker.

the microphone is next to the mute button, on the top of your device. two little holes.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

I can't turn down volume of my iphone5

Similar Messages

Maybe you are looking for