I cannot access ftp sites even after loading "Seahorse/fireFTP". What do I do next?

I need to access and upload info to an ftp site but I get an error message each time I do. It doesn't work in IE either. How can I access the site

... I really can't afford to go back and re-buy all this music (which I shouldn't have to do in the first place).
No you shouldn't. Bear in mind, though, that Apple has set this up as a user-to-user board so all we can do here is try to help you figure out why the authorization procedure isn't working correctly for your new computer.
There have been a variety of issues reported with iTunes and Windows Vista, some I believe related to the authorization procedure. So the first thing I'd do is make sure you've downloaded and installed iTunes 7.1 which was just released yesterday.
That may solve your problem. If not, click on the Review Authorization Count link in the Why can't I authorize one of my computers? section of this Apple Support page and let us know how many authorizations you're using.
Be patient and we should be able to figure this out.

Similar Messages

Unable to access ftp sites

FF 32.02 on Windows 8.1 Pro 64-bit. Attempting to access ftp site produces the following error message popup:
211-Features:
AUTH SSL
AUTH TLS
EPRT
EPSV
MDTM
PASV
PBSZ
PROT
with the following page displayed after acknowledging the popup:
The connection was reset
The connection to the server was reset while the page was loading.
The site could be temporarily unavailable or too busy. Try again in a few moments.
If you are unable to load any pages, check your computer's network connection.
If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
Cuting-and-pasting the same URL into IE 11.0.9600 results in the page displaying with no problems. Therefore, there is none of the 3 suggestions is the problem.

The county ftp site doesn't act strangely for me.
I'm not sure whether these general suggestions are applicable to ftp sites, but just in case:
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
"3-bar" menu button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
* right-click and choose View Page Info > Security > "View Cookies"
* (menu bar) Tools > Page Info > Security > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then try reloading the page. Does that help?

HT1527 I have windows 8.1 and cannot access itunes store even creating a new apple id. With other users on the same computer I can access itunes store. How can I solve this?

I have windows 8.1 and cannot access itunes store even creating a new apple id. With other users on the same computer I can access itunes store. How can I solve this?

i had the same problem before using a fresh install of Windows 8.1. I have resolved this issue by running the program compatibility wizard. This I did by right-clicking on the iTunes icon in the desktop, selecting Troubleshoot compatibility, waited for it to detect compatibility issues and when presented with the following options: 1.) Try recommended settings; 2.) Troubleshoot program, I chose the latter. When asked what problems I noticed, I checked the following: "The program worked in earlier versions of Windows but won't install or run" and "The program requires additional permission"
After that, it tired to resolve the issue, and provided the necessary settings to run iTunes. Now it's running flawlessly. I have Avast anti-virus installed though.
HTH!

I cannot access a site I use often as a403 error occurs. How do I resolve

I cannot access a site I use often as a 403 error occurs. How do I resolve?

You need to contact the website and tell them to upgrade their security protocols. Especially the following:
* The site uses SSLv3, meaning it's vulnerable to the well known POODLE attack. https://blog.mozilla.org/security/2014/10/14/the-poodle-attack-and-the-end-of-ssl-3-0/
* The site uses RC4, which is insecure.
* The site does not support TLS 1.2, which is recommended.
You can see a full list of all the problems with the website at https://www.ssllabs.com/ssltest/analyze.html?d=secure.crbonline.gov.uk
It very soon will not work in Google Chrome either, so it's in the website's best interest to update ASAP (besides protecting their users from having all their data and information stolen)

Cannot access the internet even though I'm connected to my WIFI network

I cannot access the internet even though I am connect ed to my home network or guest network. My desktop pc works fine, but not the laptop.

The new laptop shows it is connected but will not let me access with passwords I have written down. What or where is the password it is looking for?

IPhone 3GS cannot access to 3G network after upgrading to OS 5

My iPhone 3GS cannot access the 3G network after upgrading to OS5. I have checked with my operator and shows that their 3G network is working fine. Only cannot access through the phone. When I enable 3G, there will be no service for my phone. Wifi is working fine.
Any idea how to resolve this?

zlwczr wrote:
Thanks, I will try this method. After restore and syn, will it automatically upgrade back to OS5?
No. If you have 5.0.1, then you will get 5.0.1 back. Restoring should still fix it though. I would prefer to have you back up to iCloud, because there are many known issues/errors when trying to restore via iTunes on iOS 5 or later.

I cannot access to my account after recovery OS by time machine.

I cannot access to my account after recovery OS by time machine. My MBP is 13" Mid-2009, I purchesed the Mountain Lion on the Apps Store long ago, the problem occured when i was trying to upgrade to SSD. I used recovery DVD then Migration Assistant.
After restarting system, I try to access my account but the password is not right every time i try to. Why??? What should i do?

Boot into the Recovery HD and use the password reset utility.
Open Terminal from Utilities.
Type resetpassword and hit return
Choose your Hard disk, then user, then follow the screen prompts to reset the password.

We are using apple tv to try to access our itunes account on the computer. We see our library of music but when we click on the song it searches for a long time and then says that it cannot access the itunes store. Any ideas on what we are doing wrong?

We are using apple tv to try to access our itunes account on the computer. We see our library of music but when we click on the song it searches for a long time and then says that it cannot access the itunes store. Any ideas on what we are doing wrong?

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router.
Reset the Apple TV (Settings > General > Reset > Reset all settings)
Restore the Apple TV (Settings > General > Reset > Restore)

HT1918 I cannot update any apps, my security code is not invalid, but it says it is. Cannot purchase apps or even do free updates? What to do??

I cannot update any apps, my security code is not invalid, but it says it is. Cannot purchase apps or even do free updates? What to do??

Take a look here:
http://support.apple.com/kb/TS1646
If that doesn't help, go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

I am constantly getting a pop up box to sign into imessage or facetime and can't get rid of it even after entering password. What can I do?

I am constantly getting a pop up box to sign into imessage or facetime and can't get rid of it even after entering password. What can I do?

Launch Safari with the Shift key held down. If that doesn’t work, disconnect the computer from the Internet.
(116847)

I cannot find my serial number after a disk clean what do I do NOW ?

I cannot find my serial number after a disk clean what do I do NOW ?

what do I do NOW ?
http://helpx.adobe.com/x-productkb/global/find-serial-number.html
In the future, you need to get smarter about how you store your serial numbers; they must be backed up onto a different disk, just like your photos; or you may use some other storage method like paper and pencil. Just like photos, you need at least 2 copies in different locations.

Sharepoint foundation 2013 : After doing backup cannot access the site "Sorry, this site hasn't been shared with you"

I am using SharePoint Foundation 2013 , i have backed up the site using powershell with the following command:
-backup-spsite -identity http://dmsserver/sites/demo/ -path C:\SPSiteBackup.bak
After backup finished, i can't access the site, the message "Sorry, this site hasn't been shared with you" appears, even the site administrator collection is configured coorectly, with the Administrator account.
Whats the problem?
Please Advice.

Hi husseinsa,
According to your description, my understanding is that you could not access the site after backing up the site collection in SharePoint 2013 Foundation.
Could you access other sites at the same site collection?
Let’s do a troubleshooting for this issue:
Please delete the IE cache: IE options->General->Delete, select all checkboxes, and click Delete.
Go to CA->Application Management->Manage web applications, select the web application which hosts the problematic site .
Click Permisson Policy, make sure there are not any deny policies for site collection administrator and site collection auditor.
Back to the web application list page, click User Policy, check whether there are any user policies for denying permissions.
Change the site collection administrator or add a secondary site collection administrator in CA, then use the new site collection administrator to log in the site, compare the result.
Open IIS, expand the server, and click application pools.
Find the problematic web application pool, make the identity of the pool is correct, then do an IISRESET, compare the result.
If this issue still exists, please check the log file to find more information about this issue. The path of the log file is
: C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS.
Or you can use Event Viewer(Start->Run->event viewer) to find the log.
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

After site migration, users are unable to access the site, even though they have permissions, prompted to request access

Not sure whats going on here...
SharePoint WSS3.0 -> SharePoint 2013 Ent
Used ShareGate migration tool.
I migrated the site, and everything appears to be in place as expected. Users and groups are all assigned just like before.
But when users try to access the new site, they are prompted to request access.
Some users are in AD groups, that are in SharePoint groups, and some users are direct members of SharePoint groups. So far it seems to be groups with read or contribute access. The owners seem to be able to access the site fine.
This makes no since...?
Any ideas?
Joshua Fuente

Thanks, I think I may have found the issue... But it still odd, and I am still verifying if it is in fact the issue.
The old site has a visitors group, that contains an AD security group.... But that AD security group contains a DL. I know that's a problem... But it should also be a problem in the source site. (but its not)
Only thing I can imagine is that at some point the user had direct access, and it was changed to AD group. And then AD group was changed, and somehow SharePoint just didn't catch on.... (just a guess)
In any case, I am having the users added to the AD security group to see if that works.
But I will check out your script if that doesn't work.
Thanks!
Joshua Fuente

Files on FTP site won't load

My goal is to link together a course, a quiz for the course,
and a course survey that are all going to be hosted on a
password-protected FTP site. My first attempt to do this was by
going into movie preferences and pointing movie 1 to movie 2 and so
on. This works locally and it works if I put all files in the root
of the FTP site, but if I put the files in a subfolder (making the
appropriate path changes in the movie and republishing them), movie
1 ends and doesn't load movie 2. Using sub-folders is neccessary to
avoide confusing learners who will be accessing the FTP site.
I also tried using the Captivate Player and as with the other
method, it works locally. Regardless of where on the FTP site I put
the files, none of the movies load.
It seems to me that this is a problem that I'll have to take
up with my Network Admin, but it's Sunday and I was hoping that one
of you had an insight that could help me fix the problem today.
Michael

Don't apologize, Michael, we've all been "stressed out". You
said . . .
quote:
1. I published a movie to the FTP site as an SWF file, and when
I ran the HTML file for the movie, the movie ran. I then published
two movies to the site as SWF files that are linked together (the
first one linked to the second one in the movie preferences), then
I ran movie A. It ran and and then movie B started.
Good. Step 1 mission accomplished!
You said . . .
quote:
2. I created a sub-folder in the FTP site and placed the linked
SWF files there. Movie A runs, but movie B doesn't run when movie A
ends.
Taking you at your word, you
placed only the SWF file in the sub-folder, so the link was
broken - thus, the 2nd movie
couldn't run.
You said . . .
quote:
3. I published three movies to the root of the FTP site as SWF
files. I also uploaded the Captivate Player files to the site. I
modified the Player XML file so that the 3 SWF files are being
used. When I load the player, the menu shows the three movies, but
none of them will load.
Check the other Captivate Player files. Sounds
like something got left out when you either 1) configured Captivate
Player, or 2) uploaded the Captivate Player support files. From
what you said here, it sounds like it is Captivate Player that
isn't running, not the movies in the XML. You might double-check to
see if you are opening the "Index.HTML". Matter of fact, you might
even want to change the name of Index.HTML and link to the new name
. . . it won't fix this problem, but after you get it fixed, you
might find that renaming Index.HTML will eliminate some confusion.
Just a thought.
Overall Michael, it sounds to me like you are really tired
and expecting too much of yourself in that state. Take a fresh look
at it after getting some rest and a new perspective. Just another
thought, but this one is even better than the first.
.

Cannot connect to TC, even after factory reset

I bought a 1TB TC from apple in 08/2008. I don't recall if it was a refurb or not. It worked fine for 4.5 years with more or less no problems. About a month or two ago the Wi-Fi stopped working. I could connect to the SSID, but occasionally could not get an internet connection without cycling the power of the modem and TC. Finally, the cycling trick stopped working, and while I could connect to the TC I couldn't get internet. I switched to the WiFi capabilties that my Comcast modem had (as I didn't have time to address the issue then). I've finally gotten around to trying to fix it and could not find the TC via WiFi. I attempted a hard reset, but holding the reset button (while under power) did not make the yellow light flash, even after 30 seconds. I then performed a factory reset by holding the reset button while plugging in the TC. The light flashed, indicating the factory reset occurred.
After the factory reset I still cannot:
-Find the TC via WiFi
     I attempted using both my previous SSID and searching for the default "Apple Network XXXXXX" signal. No dice.
-Find the TC via Ethernet
     I attempted to connect my MBP directly to the ethernet port (<--->) on the TC but the red light remains on the Ethernet in Network Settings (Status: Cable Unplugged. Either the cable for Ethernet is not plugged in or the device at the other end is not responding). I verified the cable works by connecting the ethernet cable to the cable modem and instantly getting the green "connected" light and an internet connection.
-Find the TC via Airport Utility
     The TC did not appear, even when plugged in directly with the ethernet cable.
I'm not sure if this is a firmware issue or what. The lights turn on the front and in the LEDs above the ethernet jacks in the back during power/start up but is otherwise unresponsive. I cannot attempt a firmware update as I cannot connect to the TC by WiFi/Ethernet, let alone through the Airport utilitiy.
I'm not sure if this is relevant or helpful but the TC is also making a ticking/hissing slightly faster than once a second as if the drive is being accessed.
Can anyone help!?! I have quite a drive to an apple store and I'm sure what they would charge to mail in and fix it would be excessive.
Many karma points await anyone that can help!!! Thanks in advance for your time!

The power supply is dead.
Solid amber could also be a dead hard disk.
Apple will not fix it and do not supply parts for anyone else to fix them.
It is really no longer economic to repair unless you can DIY. And even then if the hard disk is gone then it really is a waste.. just buy a replacement.
See https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair
I have given several methods.. some rough but very cheap to repair the TC.
Otherwise it is just time to buy a new one.. or IMHO a Gen4 is an excellent buy.. second hand or from your local apple refurbish store.

I cannot access ftp sites even after loading "Seahorse/fireFTP". What do I do next?

Similar Messages

Maybe you are looking for