I cannot configure yahoo small business after upgrading to Mavericks Help needed

Hi Guys,
it is as simple as that:
I cannot configure yahoo small business after upgrading to Mavericks Help needed
Thanks

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

  • After upgrading to maverick; help & other functions not working

    After upgrading to maverick; help and other functions not working?

    Sometimes just closing and reopening the Help window will clear up the problem. If it doesn't, log out or restart the computer and try again. Otherwise, you may need to delete the Help cache.
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Caches/com.apple.helpd
    Right-click or control-click the highlighted line and select 
    Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a folder selected. Move the selected folder to the Trash. Log out, log back in, and test. Help pages will be slow to load at first.
    If that doesn't work, the problem may be caused by network conditions. It may go away by itself, though I can't say how long you should wait.
       A persistent failure to load help data has been reported as an issue with satellite networks. Test on a different network, if possible. I've also seen at least one report that Photo Stream in iCloud can mysteriously interfere with Help. I'm not sure whether that's true, but try disabling Photo Stream, if applicable.*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • Cannot access Yahoo Small Business email using Mail icon on main screen of IPad

    Until recently I was able to access my Yahoo Small Business email using the main Email button on the home screen - along with my regular Yahoo email.  When i contacted Yahoo Small Business for help, the gentleman was unable to help.  He just gave me the link to setting up a Yahoo Account on Ipad.  My regular Yahoo mail works fine so this wasn't helpful.  He said that is all he can do.
    I downloaded the Yahoo App and can access both email address from it, but it is less convenient.  This tells me it isn't a password issue.
    I have tried using:
    Incoming mail (POP3) server
    pop.bizmail.yahoo.com
    use SSl
    Port: 995
    Outgoing mial (SMTP) server
    smtp.bizmail.yahoo.com
    use SSL
    Port 465 or 587
    If anyone can send me the correct steps to set up my small business email so that I can access it via the main button (which I was able to do until recently!), I would appreciate it.    In addition, I access both via my Yahoo account on my laptop - no problem.  I am using an iPad 2 that was upgraded to Version 7.

    Hello there, Susangrillo.
    It sounds like you've done a great job in troubleshooting and reaching out to your email service provider. The following Knowledge Base article offers up some steps to review to see if it helps with troubleshooting your mail issue:
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Cannot open new finder window after upgrading to Maverick 10.9.2

    Hello friends,
    I am experiencing a very strange issue.
    I cannot access the contents of my files via the finder. I can access my files via open or save as from separate applications.
    I have tried the following:
    Finder ---> New Finder Window (finder flashes or switches to an existing open application)
    Double-clicking on existing folders (finder flashes or switches to an existing open application)
    Double-clicking on the icon of my Macintosh HD (finder flashes or switches to an existing open application)
    From Dock, click on downloaded document and choose "Open in Finder" (finder flashes or switches to an existing open application)
    From iPhoto, select a photo, and select "Reveal in Finder" (nothing happens)
    Restart machine has not fixed the issue
    After several tries, I get an error displaying that there was an issue with the finder.
    I am running Maverick 10.9.2

    Unfortunately, Finder is a part of OS level files. So, we have a couple of options.
    First off, let's see if there's a software conflict somewhere. Boot into safe mode (boot the comptuer with the shift key held down) and try there. If it works in safe mode, odds are we either have a 3rd party KEXT or application blocking its launch. Check your login items (Apple -> System Preferences -> users & groups -> select your user -> login items), and disable them.
    Also check your startup items (you'll have to do this in safe mode as it requires Finder).
    /library/startupitems
    If Safe Mode/removing startup/login items doesn't work:
    First, boot in to the recovery partition (boot the computer with command + r held down). Launch disk utility, and repair both disk permissions and the disk. Reboot and try again.
    If that fails, boot into recovery again, and reinstall.

  • Cannot save changes to dock after upgrade to Mavericks

    As the subject line states, I can't make any changes to my dock (removing or adding apps/icons) stick beyond a restart.
    Based on suggestions on the net, I've tried a few things:
    1. Look for and delete com.apple.Dock.plist in ~/Library/Preferences. Didn't work because the plist doesn't exist on my machine, not in that location or anywhere else. defaults read com.apple.Dock returns Domain com.apple.Dock does not exist.
    2. Noticed that when I do make a change to the dock that ~/Library/Application Support/Dock/*.db changes. I deleted those, restarted, checked permissions (current user - me - has r+w access), made changes, and restarted again.
    So far, no luck. Any other suggestions?

    On another hint, I used TinkerTool to change a random dock setting, relaunched dock, and then unchecked the setting, and apps are now persistent past restart.  Also, the com.apple.Dock domain appears to be properly registered with OS X.

  • Cannot End Call on Q10 after upgrading to OS 10.2

    I cannot End Call (mostly Outgoing) after upgrading to OS 10.2. The receivers phone keeps ringing even after i try to disconnect the call. The "END CALL" option is grayed out and the red led on the top left keeps blinking. This happens very frequently (mostly Outgoing calls). Any thoughts or solutions Thx

    marootz wrote:
    I cannot End Call (mostly Outgoing) after upgrading to OS 10.2. The receivers phone keeps ringing even after i try to disconnect the call. The "END CALL" option is grayed out and the red led on the top left keeps blinking. This happens very frequently (mostly Outgoing calls). Any thoughts or solutions Thx
    From the main screen, swipe down from the top black bezel to Settings > About... what is the OS Version listed there?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Cannot print a PDF file after upgrading to Windows 8.1

    Cannot print a PDF file after upgrading to Windows 8.1
    I can print anything else from either the Desktop or Start but not a PDF.  No error message but just does not print.
    Update: down loaded Adobe Reader which runs on the desktop so when I read a PDF file it now runs on the desktop and I can print it.

    Cannot print a PDF file after upgrading to Windows 8.1
    I can print anything else from either the Desktop or Start but not a PDF.  No error message but just does not print.
    Update: down loaded Adobe Reader which runs on the desktop so when I read a PDF file it now runs on the desktop and I can print it.

  • After upgrading to Maverick, when I double click on the attchment I get this message "...could not be saved, because you cannot change the contents of that fold

    After upgrading to Maverick, when I double click on the attachment I get this message "...could not be saved, because you cannot change the contents of that folder. Change the folder properties and try again, or try saving in a different location." It happens for all types of files.
    Any suggestions as how to fix this?
    I'm on a Mac OS X 10.9.3 with Thunderbird 24.5.0

    Thunderbird > preferences (I think on a mac) and under attachments set the folder

  • HT4623 i cannot activate my iphone 3gs after upgraded to ios 6.1

    i cannot activate my iphone 3gs after upgraded to ios 6.1, please help!

    read http://support.apple.com/kb/TS3424

  • After upgrading to mavericks, i cannot open mac app store, preview, calendar, etc

    Why i cannot open mac app store, preview, calendar, software update, etc after upgrading to mavericks? How can i fix this? please help me

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • How to use MfE with Yahoo Small Business e-mail ac...

    Hi,
    I am using N97, and trying to access MfE with my company's e-mail id. We have taken e-mail id from Yahoo Small Business. 
    My question is
    1. Is it possible to access Yahoo Small Business's e-mail on my N97 using MfE (I am using it with normal Mailbox option in phone).
    2. If we can use what is the server name which I need to use for this application (It is not accepting pop.bizmail.yahoo.com).
    Please help me out.
    Regards
    Akshara
    N97 Black India
    Attending Nokia Discussion has become new hobby, Thanks to Nokia... for having so many bugs

    Maybe this can help you out.
    http://help.yahoo.com/l/us/yahoo/smallbusiness/bizmail/pop/pop-33.html
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • Mac OS mail (PDF) attachments cannot be read after upgrading to Maverick

    After upgrading to Maverick receiver of e-mails with PDF attachment cannot see or open the attachment. Everything works normally with attaching and sending but it seems to disappear on its way to receiver.

    Having the same problem…attachment is visible inline, but cannot be opened nor downloaded. See this thread:
    https://discussions.apple.com/message/23508746

  • After upgrading to mavericks i cannot log into my VPN using RDC

    After upgrading to mavericks i cannot log into my desktop at work using Remote Desktop Connection for Mac
    I get a message that The computer i am triyng to connect to cannot establish my identity
    What to do?

    You don't need to go to the App Store to for support for Steam and Minecraft. You need to go to their website(s).
    You're welcome 

  • Nokia email client and yahoo small business proble...

    Hi All,
    I have been using nokia email client for more than a year and it was working perfectly fine until some days ago.
    I updated my email client with latest build and now it is not fetching/pusing email for yahoo small business email address. I have tried all option but with no luck.
    Important point to notice that it is pushing all email from simple yahoo account.
    Anyone else having same kind of issue. Any help will be appreciated.
    Thanks

    I have the same problem! It used to work on my macbook for over a year then it just stopped. Not sure what did it...

  • IWeb and Yahoo Small Business

    So I reserved my domain name and paid for yahoo small business web hosting. I created my web pages using iWeb. I used file>publish and loaded the pages into a file on my desk top. That's where I'm stuck. I had been working on two separate sites. Both Site and Site1 were added as FOLDERS in my designated desktop folder. I then went to Yahoo Small business. It asked me to upload FILES. There are several files for each folder. Do I upload each one? Am I missing a step completely? Thanks.

    It asks me for my server.
    Yahoo provides you the info to put in the ftp forms: server, username, password, directory.
    In terms of the previous reply in addition to the index file there are a number of other .html files and associated folders. Upload all of these??
    You upload the folder that contains all of these, plus the index.html file which is outside that folder. The folder has the name you gave your site inside the iWeb app. So you really up load two items.

Maybe you are looking for

  • Formatting - How to print a frame on the bottom of  the last page ?

    I have a summary frame for my report. I want to print the summary information at the bottom of the last page of the report. Currently depending on the data, the summary frame prints anywhere on the last page. How do I make sure it prints exactly at t

  • Why is it taking so long to extract the free trial download of creative suit

    why is it taking so long to extract the free trial download of creative suit

  • How to get simple tween to stop looping

    I have created a real simple motion tween a text tween ,,,,,, it works fine when i test it on the stage,, i removed the "loop" in html and that tests fine ,,, i added a stop(); in the last keyframe but it does not stop when i test it through flash???

  • Delta datasource management in process chain

    Hi experts, I have the following problem with process chains. I have one <b>Delta</b> infosource used to load two different infoproviders (ODS1 and 2).ODS 2 must be loaded only once ODS 1 is loaded and activated. The Delta process implies that the <b

  • Lightroom 5 Download file faulty

    Downloaded a trial of lightroom two days ago, but it won't work. I have only just bought a Mac so do not understand how it works so looking at the work arounds is useless. If I leave downloading again for a few day is this fault going to be rectified