I cannot get ADE to see my Sony PRS-505 reader.

Have got the latest (Mac) ADE and Reader software (re-installed several times), an Adobe ID, the iMac is authorised, but I cannot get the PRS-505 to appear as a bookshelf in ADE, nor does the eReader show any manifestation of ADE. Have trawled the forums and FAQ's bu to no avail. Any help on this would be greatly appreciated.
regards Peter

Hi,
In order to fix this please do following.
Solution 1)
1) Connect your Reader to your computer.
2) Once conncted you will find a new drive created similar to C or D drive under My computer.
3) Open the Readers Drive and you will find one or two folders with name Digital Editions.
4) Delete those folder and plug off and re plug in the Reader.
5) Authorize Reader from the same Adobe ID which you used to Authorize Adobe Digital Editions.
6) Now try to transfer books to your Reader
Solution 2)
1) Click Start>>Run
Type "regedit" in the box and hit enter.
Locate the following key HKEY_CURRENT_USER>Software>Adobe>Adept>>Device delete the full folder (Right click on it and click delete).
2) Now Connect your Reader and then open Digital Editions.
3) Now it should recognize your Reader.
4) Connect the Reader and authorize it with same ID.
I hope this will help you..
Regards
Rizwan

Similar Messages

I cannot get CS6 to recognize my Sony DCR-TRV340 camera for capturing video from that camera. CS6 c

I cannot get CS6 to recognize my Sony DCR-TRV340 camera for capturing video from that camera. The CS6 capture box keeps putting up a message that capture device is off line. The Sony DCR-TRV340 camera is not listed in the CS6 Device Type list in the CS6 DV/HDV device control settings box of Sony cameras. I've downloaded what I think are the correct drivers for the TRV340, and when I plug the camera into the computer, the computer shows it listed in the devices and printers box, but CS6 will not recognize it. Do I need to install these drivers into a specific folder in the CS6 program? If so, where do I find these drivers in the windows 7 professional operating system, and into which CS6 file folder would I copy them to?

Most camera's are not listed in Device controle, set it to Sony and generic. Yours is very old its a Digital 8 camera (I still got a TRV210). Johns second link wont work with your camera.
You do not need to download drivers nor do you need to install anything. Most likely its the Legacy driver.
Read though this document.
http://kb2.adobe.com/cps/828/cpsid_82848.html
General rule is connect camera to pc wait until windows reconigzes the camera.
Fire up Premiere and capture.
Never connect the camera to pc when the camera is on.

TS3720 I have updated to Mac OS X v10.6.7 and STILL cannot get video into iMovie from Sony HDR SR11 :-( PLEASE HELP ME ...

I have updated to Mac OS X v10.6.7 and STILL cannot get video into iMovie from Sony HDR SR11 :-( PLEASE HELP ME ...

* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Can't see sony PRS-505 in digital editions

Have just downloaded ebook into digital editions on a new computer. (installed yesterday). On old computer, when I plugged in my sony prs-505 it showed up in digital editions, i dragged and dropped the book onto the sony - hey presto!
The sony is not showing on digital editions so can't drag and drop - have tried all drives in the computer.
How do I get the reader to show in digital editions? Thanks - K - Kiwi

You have to install the sony library, available here: http://ebookstore.sony.com/download/
After installing the sony library your Reader will be shown in digital editions.

Unable to transfer ebooks to my sony prs 505

Since I bought my new laptop with windows 8 I have had unsolvable problems and can still not transfer an ebook to my sony prs 505. I am having assertion failure, port error messages and licensing error messages. Can I please talk to someone over the phone so I can describe what is happening. The last time someone helped me by sharing my computer I had 190 talk windows that I had to close manually.

Chris,
This is a known issue that happens once in awhile, and honestly it isn't good news.
What it means, basically, is that due to an -extremely- obscure issue with the activation server, the ID you've used to authorize ADE 1.5 is corrupted (on our end, at the server). We have been trying to figure this out for awhile now, with little success.
You'll need to de-authorize and then re-authorize with a NEW adobeID:
1. Launch Digital Editions 1.5
2. Enter the key-combination of Cmd-Shift-D (Mac OS X) or Ctrl-Shift-D (Windows)
3. At the dialog, confirm that you wish to de-activate the machine
4. Quit Digital Editions
5. Restart ADE, and re-authorize with a NEW AdobeID. It doesn't have to be your Adobe support account ID, it can be anyhting that you can remember.
Now, at this point I'm not sure if your existing ebooks will automatically be re-migrated to the new account. I'm checking with Engineering to find out..
Regards,
Bentley Wolfe
Senior Support Engineer, Flash/Flash Player/Digital Editions
Adobe

Cannot get ADE to recognize my new device

How do I get ADE to recognize my new NOOK HD? It will recognize my 'old' NOOK Color - no problem.

If that is a tablet device it may not be recognized by ADE.
You must load an Adobe DRM compatible app on the tablet (such as Bluefire or Aldiko) and register that with the same ID you use for ADE.
Then use file manager (Windows Explorer. Mac Finder) on the computer with the Nook plugged in to copy books to the Nook, which should show up as a mounted drive.

Sony PRS-350, Reader, ADE, PDF, EPUB, HELP

Don't want to say how many hours I've spent trying to download two books from my local digital library to my new Sony PRS-350 e-reader.
My setup:
Windows XP Svc Pk 3, IE 8
Sony PRS-350 e-reader, listed as a compatible device with my area's digital library
Authorized my computer and device on both Adobe Digital Editions and Sony Reader sites
I bought the Sony for borrowing from the library, rather than having to buy.
Downloaded a PDF book from the digital library to ADE but was unable to send it to the e-reader
Downloaded an EPUB book that is nowhere to be found on my PC and also not on ADE [and obviously not on the e-reader]
When downloading/attempting to download, the Sony Reader window opens up telling me "this computer is not authorized to preview this book".
I am not trying to buy a book from the Sony Store, only trying to download what I have borrowed from my library.
I've sent emails to the local library which supports the digital library, but it is too early to expect to hear back from anyone and I also hope that someone here will have some thoughts based on the information I have provided. I must be missing a step but after reading the instructions on the e-reader and online [and some posts here], I am no closer to figuring out what I am doing wrong.
Thanks to all for any information. I am bleary-eyed and need to get away from the screen. Will definitely check back later.

It may be useful to mention this (the need to install the Sony library software and the no-function on Mac) in the help for moving books from ADE to supported e-readers (the PRS-350 is on the list of supported devices), since it clearly states that ADE will recognize e-readers when you connect them to an authorized PC and will prompt you to authorize the ereader. I have been trying for two days to get it to work and authorize my e-reader...
Grateul for your post, though, so I can stop my attempts.

Digital Editions does not recognize and authorize sony PRS-505

The problem is that it my first purchase a DRMed ebook at dieselbooks and I dowloaded digital editions and authorized it with no problems,
i downloaded the ebook and i was able to read it on digital editions. But the problem is that when i plug in the sony reader digital editions does not recognize it, so i cant authorize it and im unable to read the ebook on sony reader prs 505.
Since the ebook is DRMed i cant use another program to do it, i tried acrobat 8 with no solution.
Do you guys have an idea how to solve this problem?

Make sure you have installed and are running the latest Sony EBL software, the installation contains the needed drivers for ADE to talk to the 505. Note: if you are running on a Mac, ADE will not be able to talk to the 505 and you will have to use the Sony EBL 3.x instead.

Sony BDV-E570 - Cannot get sound from TV to Sony system using Digital Optical Cord

I get beautiful audio out of this system in FM Tuner, BD/DVD, and Internet Radio - no buzz whatsoever. However... the only way that I can get ANY audio from the TV or Cable box to come out of the Sony system is with RCA cables (the old style Red / White). This produces a horrible buzz but at least the TV sound comes out. The manual gives three different options for streaming TV audio through your Home Theater System. I purchased an 8' Rocketfish digital optical cable at Best Buy. It doesn't work at all! No audio at all. It fits, but doesn't quite want to "stay in"; is this normal???
I have the Sony BDV-E570 system, Vizio 46" TV (purchased 6 months ago) and a Comcast Digital HD cable box. All three have the same optical outlet and this cable doesn't "stay" in any of them. Does this sound like an Optical Cord issue? I really don't want to take this system down and lug it back to the store.
Thanks for any help!
Troy
Solved!
Go to Solution.

An optic cable should be able to fix the buzzing sound. If for some reason it isnt staying in the back of the system, then there could possibly be a falty connection in terms of the optic cable input or connector. Otherwise, as long as you have the audio cable hooked up, no matter which route you choose to connect them, and have your tv's audio set to external speakers you should be all set. If this continues to not work, I'd try calling either Geek Squad/Home Theater specialist or call Sony's technical line and see if they have any other suggestions. I myself am a Best Buy Home Theater specialist and this is my initial reaction to the issue at hand.

I cannot Get Media after seeing thumbnails when trying to import from iPhone. Why?

I connect my iPhone to my PC and open Photoshop Elements 11 Organizer. I click Import and select my iPhone (using current iOS version). It searches and finds all photos. I click get media and I get the following error: "Elements cannot obtain files from this device. Please ensure that the device is connected properly, or that the battery is charged, and try again."
I click Ok and the import fails.
In the attached screen shot you can see the import process about to begin, but the error box pop up over top.
Please help so I can import my iPhone pics.
Guy

I think I may haev solved the problem. I imported in chunks and found that one of the files was throwing off the import. Then the problem resolved and the import worked.
I still get duplicates when importing from the iPhone. Is this still a bug?
I solve that by searching for *.jpg and *.mov with file names "-1" (excluding "edited") and then delete them. That works, but the bug is still a problem.

Cannot get my G5 to Recognise Sony DCR-TRV16E

I am a brand new Mac user and this is just one of my new obstacles - I have the above Digital camcorder and when I go into Imovie it will not recognise the camera - i have checked the apple site and the camera is not listed - is there a way around this?

You did not mention how you were connecting your camera to the Mac. Your camera came with a USB connector cable, not a Firewire cable. The USB is only good for transferring still digital images, not video. Make sure you are using the Firewire. If you are using the Firewire, there is no reason for the camera not to be recognized unless you have a bad cable or a bad connection.

I cannot get adobe to download most recent flash or reader for Firefox nor can I find a plug-in for either

After my laptop crashed the second day of class, I had to send it away for repair for 8-12 weeks. I have had to reset it up from scratch and have set-up Firefox. There is a online college math program that they recommend using Firefox with. In the past I have never had a problem with Adobe anything. The program also requires the newest Adobe Flash Player and Reader. I have repeatedly tried downloading, rebooting and restarting the the downloaded .exe files for both (making sure there is only one version running at a time in the file folder and in task manager background). I have used all possible settings for adobe products permissions to work across all firewall, antivirus, web protection, Mozilla and my computer systemin general, even Internet Explorer (Hate it).
The files download to my downloads file folder through Firefox, however, when I double-click to install them I get the "Do you want to run", "yes", then "Windows smartscreen is unavailable do you want to run anyway, "Yes", then absolutely nothing happens. No wizards, no installing, nothing or I get a "Only one single instance of this file must run." and again nothing. Tried it with nothing open, but the "install" and with the browser open. Neither works. It's usually listed in |Task Manager Background apps, but uses no memory, no CPU, nothing.
I've also tried contacting the school program's IT division (3 hours) nothing, the program itself's IT department (2 hours and they disconnected me) or the best anyone could offer was use another browser. Can't get the only other option, Chrome, to work on my computer at all! I've tried all Mozilla and Adobe support/knowledge bases/zines, etc... I'm just a Joe schmo not a developer or IT person and a 4 finger typist at best. What I am is 2 weeks behind in my online class and ready to pitch the f#$***g thing across the room. I was able to borrow a laptop from a friend until I got mine back, but that isn't an option anymore.
Also tried finding an older version - no luck, All support sites keep telling me to find the Firefox "Adobe Plug-in" and just update from there. I have searched all Mozilla Plug-ins, add-ons, etc... but nothing, just download(s) for non-adobe flash players that the math program won't use. No matter How much I try to get it to.
AUUUUUUUUUUUUUGGGGGGGGGGGGGGGGGHHHHHHHHHHHHH!!! Help.

For Flash, could you try downloading the "full" installers from this page:
https://www.adobe.com/products/flashplayer/distribution3.html
In the first table, there are two rows for Windows: one for the ActiveX control for IE, and one for the plugin for Firefox. You might want to grab both. And try the .msi files instead of the .exe files to see whether those work better.
Will either of those install?
It's odd that on a newly rebuilt system your More System Details shows that you have a user.js file, which is an optional settings files used to override your previous session settings. This is not part of the standard Firefox installation, so if you did not create that file yourself, you may want to investigate or delete it. This article has more information on that: [[How to fix preferences that won't save]].

How can I authorizing a Sony PRS-300 Reader?

My ebook account (Sony) was recently transferred to Kobo Books. Some of the books I've purchased are Adobe DRM protected. This didn't used to be a problem before the transfer. I don't seem to be able to authorize my Sony reader. Is there any way this can be done?
The PRS-300 came with ADE. Adobe discontinued supporting this model of reader which effectively made it useless for ebooks protected by Adobe DRM. Other models of the Sony Reader continue to be supported. I find it hard to believe that this particular model was axed when the same, or a similar, fix could have been provided. Shame on Adobe!

First of all, you should have used the Adobe DNG Converter 8.6, not an old, obsolete version. Always use the very latest version. 8.3 was simply the first ACR version to support your camera model, that's all.
Note that the DNG Converter works only on folders, not on individual raw files. Put all your Sony raw files in a folder and run the Converter on that folder containing the raw files.
I have absolutely no clue as to what on Earth you mean by : "upon reading the memory chip from Photoshop CS5".
You also need to make sure that CS5 is fully updated. You cannot rely on the highly and notoriously unreliable Adobe auto updater to tell whether you have the latest update installed or not.
I still have no idea what platform you are on, Mac or Windows. Please read the following for next time:
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them, etc.,
someone may be able to help you (not necessarily this poster).
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Trying to connect a Belkin brand audio cable from my MacBook Pro to a Sony flatscreen TV. Cannot get any sound from the laptop out of the TV. What am I doing wrong?

I'm trying to connect a Belkin brand stereo audio cable from my MacBook Pro to a Sony flatscreen TV (Apple "genius" handed me the cable to purchase.) I have tried all the ports in the back of the Sony, and tried the volume on both the cable and TV remotes. I cannot get sound out of the Sony from my MacBook Pro laptop. What am I doing wrong???

Downloaded your operating manual. It appears that you need to connect the HDMI to HDMI 1 and the audio to the input socket just to the right of the VGA socket (i.e., between the VGA and the RF input connection). The picture on page13 seems to be the clearest I could find:
Although it's not exactly clear I think they are talking about a standard 3.5 mm (1/8") stereo jack for the audio inpu as opposed to the more common RCA jacks used in the row just above that VGA input socket.
I haven't checked the manual as yet whether you need to set anything special with the controls other than input select.
Note, if that truly is a 3.5 mm stereo jack cables are very common. In your case it would just be a cable with a 3.5 mm jack on each end.
Update:
You will have to experiment with this but I think you will need to try pusing the input button to select either HDMI1 or PC (or Component?). The manual is not clear on this (page 31). Sometimes it just comes down to pushing buttons.

HT5517 got an apple TV but cannot get it TV with HDMI

cannot get HDMI to activate on Sony bravia bx400 TV with my apple TV

make sure you choose the hdmi port the atv is connected to as active input source on your tv
my bravia have 5 and to view stuff from each of them I need to choose which one using the device
and the bravia home menus to chose input source as take hdmi 2 or 3 or 1 or...

I cannot get ADE to see my Sony PRS-505 reader.

Similar Messages

Maybe you are looking for