I cant all my fonts to show up in indesign cs3. I am on a mac and don't understand why

I am using font book where all the fonts are located, but not all of them are showing upi in indesign

Scroll through the whole list, first to make sure they aren't listed in some order you aren't expecting. Which fonts in particular?

Similar Messages

  • Guys, the playlists I created on iTunes do not show up in the Sync options for the iPod. I don't understand why not.

    It only shows me the Generic Playlists but not mine.
    Please help, Thank you.

    I'm not sure what you mean when you say that the wireless devices are not  visible in AirPort Utility.
    Open AirPort Utility - Click Manual Setup
    Click on Wireless Clients (3rd line from the bottom) and a window will open to display the AirPort ID of each connected device.
    I'm also not sure what you mean by "manage". Once a wireless device is connected to the network, you cannot "disconnect" it from the network using AirPort Utility. AirPort Utility only monitors the connection.
    Using the Timed Access feature in AirPort Utility, it is possible to assign daily time limits for each device that is allowed to connect to the wireless network.
    So, for example, one iPod would be allowed daily access from 8AM to 11 PM. The iPod would not be allowed to connect between 11:01 PM and 7:59 AM in this example.
    You can set up different time limits for each device that you want to allow to connect to the wireless network in similar fashion.

  • Fonts not showing up in InDesign CC 64bit

    I find it extremely difficult to believe that Adobe have not found a solution to the issue of installed fonts not showing up in InDesign. If anybody has found a solution that does not include the "rewriting" of font types. Please assist. We specialize in Brand Management, and it becomes extremely challenging when Adobe InDesign does not show up the installed font in order to ensure Brand Management :/

    POSSIBLE SOLUTION
    I'm not sure if this is the cause for anyone else, but I had the same symptoms--almost no fonts showing up in InDesigns Font dropdown options.
    THE SOLUTION:  The new version of ID has two "font filter toggle button". They are the "Apply Favorite Filter", and "Apply Typekit Filter". It seem that in my install, the Typekit filter was on by default, which makes it so that the Font list only displays those fonts that originate from Typekit, as opposed to the thousand you have on your hard drive.
    Click the toggle to turn off the filter and --zowee! All your fonts come right back.
    I hope this helps some of you. It would also explain why people on both Macs and Windows boxes are having this issue.
    Best,
    Lance

  • Hi, my wifi set up is Extreme, Express then iMac. All showing solid green status. Airport utility showing no connection tho? i can see network name and use homesharing too. why is it showing this?

    Hi, my wifi set up is Extreme, Express then iMac over 3 floors. All showing solid green status and iMac (showing full signal wireless). However, the Airport utility is showing no connection? I can see the network name and use homesharing too. why is it showing this??

    I dont follow the problem?
    By the way, i hope you have those all set on non-interfering frequencies. e.g.: 1,6,11
    Grant

  • HT1918 i don't understand why i cannot purchase anything using my Mastercard. Each time i enter the card expiry date, it will show an error.

    Last time i usually pay the purchasing item using my debit visa card.
    after that i no more use the debit visa card.
    i'm using mastercard.
    now each time i want to purchase anything, i cannot pay using the mastercard.
    when i insert all the details including the expiry date, apple will show an error. only the expiry date.
    i don't understand why.

    Does it have to be an applet?
    If you want the same behaviour as in the code with traffic lights, change
    class MortgageApplet extends JApplet implements ActionListener {
    to
    class MortgageApplet extends JFrame implements ActionListener {
    and change
    public void init() {
    to
    public MortgageApplet() {                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • I don't understand why recently with the new "pages" my computer stops responding. When I go to fix some grammar all of a sudden the little colored circle begins to appear and won't go away I restart my computer.

    I don't understand why recently with the new "pages" my computer stops responding. When I go to fix some grammar all of a sudden the little colored circle begins to appear and won't go away I restart my computer.

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after  you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of report — it will be very long and not helpful.

  • I don't understand why i cant log in to my fb account using mozilla but with googlechrome i am able to do that.. mozilla can load up the fb site but cannot log in to my fb account.. i am comfortable with using the mozilla as my browser.. pls help thanks

    i don't understand why i cant log in to my fb account using mozilla but with googlechrome i am able to do that.. mozilla can load up the fb site but cannot log in to my fb account.. i am comfortable with using the mozilla as my browser.. pls help thanks

    hey thanks alot.. it helped me alot!! bring it on!!! cheers!!!

  • HT1695 my ipad2 will not connect to the internet, it says that it "unable to join"...but my laptop is connected to the internet.... i don't understand why all of a sudden it stopped connecting it dosent make sense

    my ipad2 will not connect to the internet, it says that it "unable to join"...but my laptop is connected to the internet.... i don't understand why all of a sudden it stopped connecting it dosent make sense.

    hmm, well I would say that raises the possibility of an issue with your ipad, and lessens one with your router.
    What version iOS are you using? Update
    Then Its time to try a restore.
    How to update your iOS device
    http://support.apple.com/kb/HT4623
    How to back up and restore (iCloud and iTunes)
    http://support.apple.com/kb/HT1766

  • HT203180 shows (I already of 5 of them) now it says they can't be played on my ipod, and I purchased them from Itunes? I don't understand why they won't work?

    I purchased the remainder of shows (I already of 5 of them) for a TV series now it says they can't be played on my ipod, and I purchased them from Itunes? I don't understand why they won't work? I tried the conversion but it's greyed out and not chooseable. But again purchased from itunes so they should work according to the above article. Can anyone help me?

    Dracwolley wrote:
    They can. The video needs to be converted, though. If it's in your library, just go to Advanced (in the top menu), then click on "Make iPod/iPhone Version." Wait a while, and when it's done, click and drag. Or for a quicker alternative and less space lost on the iPod, download Handbrake here.
    Yep.

  • I don't understand why a person who has been with a company for 6 years cant get a simple upgrade can anyone help figure that out?

    I don't understand why a person who has been with a company for 6 years cant get a simple upgrade can anyone help figure that out?

    Are you trying to get an upgrade before you're actually eligible? If that is the case, it doesn't matter if you've been a customer for 6 years or 6 days...if you're not eligible then you're not eligible. Some of your possible options are to pay full retail, do an early edge up (if you are eligible for that option), or buying a phone from some other source to use.
    If your situation is something different then it might help to share that. The options may still be the same but it helps to know what exactly the issue is.

  • I don't understand why they ask for payment for all the applications labelled free. Regards

    I don't understand why they ask for payment for all the applications labelled free. Regards

    How to Get Apps From the App Store Without a Credit Card
    http://ipadhelp.com/ipad-help/how-to-get-free-apps-from-the-app-store-without-a- credit-card/
    Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
    http://support.apple.com/kb/ht2534
    Why can’t I select None when I edit my payment information?
    http://support.apple.com/kb/ts5366
    If None is not available - On your computer launch iTunes and click “iTunes Store” in the left navigation pane. Click the “down arrow” next to your name at the top right side of the page and click “Account.” Enter your username and password and click “View Account” to log into your account information. Next to your Payment Type, click “Edit.” Select the “None” button and click “Done.” Confirm that your card has been removed by returning to the Apple account information screen. Under Payment Type, it should say that there is no credit card on file.
    iTunes Store: Changing your payment information
    http://support.apple.com/kb/HT1918
    iTunes Store Accepted Forms of Payment
    http://support.apple.com/kb/HT5552
     Cheers, Tom

  • I have had my apple tv 2 for about 3 months which work perfectly fine when I use it with my iPad 3 ー all of the sudden I get the HDCP Error!  I read the forms and done everything!  Apple I name a loyal customer, please come out with an update soon!

    I have had my apple tv 2 for about 3 months which work perfectly fine when I use it with my iPad 3 ー all of the sudden I get the HDCP Error!  I read the forms and done everything!  Apple I name a loyal customer, please come out with an update soon!

    That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
    So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
    But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

  • CS6: Fonts not showing up in Indesign or other adobe programs

    There are missing fonts in several of our files due to moving our marketing inhouse.
    I have installed the Avenir complete font family into C:\Windows\Fonts and a lot of them aren't showing up in InDesign or the other Adobe programs.
    After looking at some other forums I followed the instructions to place them into;
    C:\Program Files (x86)\Adobe\Adobe InDesign CS6\Fonts
    C:\Program Files (x86)\Common Files\Adobe\Fonts
    STILL The only fonts showing up are;
    Avenir 35 Light
    Avenir 45 Book
    Avenir 55 Roman
    Avenir 65 Medium
    We have already been using this font for all our printing so changing is not an option.
    Could someone give me some other suggestions?

    Have you rebooted? What format is the font? Does it show correctly in any applications?

  • Fonts not showing up in InDesign CS4?

    Hi,
    Newbie here, so any wisdom from the voices of experience is greatly appreciated.
    I just upgraded from CS2 to CS4, and several fonts that worked fine in CS2 do not even show up in CS4 (!).  I'm working with Mac OSX and I'd really like to know if anyone has any constructive suggestions.  I've done some poking around online and it seems I'm not the only one who's encountered this little issue, but it also seems that others have been unsuccessful in resolving it.  Can anyone provide some insight?
    Thank you!

    Thanks for responding.I'm working with Mac version 10.5.8. 
    The fonts I'm trying to work with are foreign language fonts that don't appear anywhere on the font list (trust me-I've looked!).
    Well, if you've really looked through the whole list, you already know that foreign-language fonts usually show up at the end of the list, in categories that are ostensibly by language. Some of them do not show up in their pre-ordained language category; massive Unicode roll-ups of many scripts often show up with the Latin-script fonts or the Thai fonts (???).
    I'm the complex-script DTP wonk in a translation firm that specializes in refugee languages; chances are that I've already encountered the fonts you're trying to install, at some point in the last decade. If I haven't, I know someone who has done so. You really should post the names of the fonts, so I can tell you if I know anything about them, tricks to install them, and so on.
    As far as how the fonts were installed-I'm not sure how they got here initially (fonts are a great mystery to me), but they show up in my Fontbook in the "Computer" collection but not the "User" collection.  Could that have something to do with my problem?
    Uh, maybe. I doubt it, though. You could find out by
    1) Finding out where the actual font files are.
    2) Copying them to your desktop, or someplace where Mac OS can't get to 'em.
    3) Uninstall them from Fontbook. (I don't have a Mac with that version of Mac OS installed; I'll look when I'm at home to see if I can give you step-by-step instructions, or you can Google for instructions.)
    4) Put the font files in your /Applications/Adobe InDesign CS4/Fonts folder.
    For fonts that Mac OS doesn't like, this is the most reliable way to get them working. But really, post the names of the fonts and I'll probably be able to tell you all about using them for typesetting in InDesign.

  • Enabled fonts not showing up in InDesign after Mountain Lion Upgrade

    After upgrading to Mountain Lion, fonts that are enabled in Font Book (Adobe open Type) are not showing up in InDesign CS5.5.
    However, if I go to Font Book and disable the fonts, then re-enable them...they will show up in InDesign.
    Anyone know how to fix this?
    Thanks!

    It sounds like a small glitch in your Mountain Lion upgrade. If you're just done an in-place upgrade (not a clean install) these things can happen.
    It sounds like you've found the workaround. But if you discover other problems with the upgrade, you should consider a clean install. Do a Google search on "clean install Mountain Lion" to find out how.

Maybe you are looking for