I just changed the channel on my Airport Extreme and now can't get the Airport Express to recognize the network. What do?
I changed the channel on Airport Extreme to get away from interference. Now I can't get my airport express to recognize the network. What do I do?
I would suggest that you perform a "hard" reset on the AirPort Express Base Station (AX), and then, using the AirPort Utility, reconfigure it "join" or "extend" the AirPort Extreme as appropriate for your networking requirements.
Similar Messages
-
I just replaced my airport extreme and now the amber light on my airport express is blinking. When I go to utilities and try to find the airport express it does not show up.
What should I do?Anytime you change networking hardware it is always a good idea to perform a complete power recycle of that hardware. Check out the following AirPort User Tip for details. Please post back your results.
-
I have just changed internet providers from BT to Virgin, and now my iTunes doesn't show any of my airport express devices. I assume that I have to reconfigure them to the the new wireless but how do I do this frmo my PC? Thanks
I would recommend that you start by performing a "factory default" reset on each of your AirPort Express base stations. Once completed, you can use the following Apple Support article to configure each base station for streaming.
-
I just downloaded iOS 6 on my iPhone 4 and now can no longer open internet links that were texted to me. Anyone else having the same problem or know how to fix this?
The SMS links thing is highly annoying. You don't have to copy/paste however. You should see an icon like this: (>) to the right of the text bubble with the link. Tap on that, the in the screen that opens, tap "Visit".
Alternatively, you can tap twice directly on the link, then hold your finger down after the second tap.
Still unnecessarily difficult, but not as bad as copy/paste.
What I don't get is why can't I find any mention of this change or how to fix it (if even possible) elsewhere online? -
I have just agreed to software updates on my imac and now can't open my mail. There is a message saying this version of mail isn't compatible with this latest software. I have located the updated mail in the applications folder but it won't open. I don't have the original operating software disk. Does anyone have any suggestions?
Your reply suggests that you have moved Mail to a different location, which (as I said) will prevent it from being properly updated. You cannot use Mail 4.5 with any recent version of Mac OS X. Mac OS X 10.7 (Lion) included Mail 5 and Mac OS X 10.8 (Mountain Lion) includes Mail 6. I'm assuming that you have either Lion or Mountain Lion, but if that is incorrect, you will need to provide that information.
At this point, you will need to reinstall your system. Hold down command-R at startup and reinstall the system right on top of the old one. This should not disturb any of your documents or applications, though you should have backups beforehand in case something goes wrong. And at this point, with your system in an uncertain state (I don't entirely know what you have done to it), something could go wrong.
You will also want to delete the old copy of Mail 4.5, wherever that is. You can't use it.
In the future, do not move any of the preinstalled applications. Leave them where they are. -
I just rented 2 movies on my Apple TV and now I am getting the message, "Your Apple TV is not authorized to play this content". Now I have 2 Apple TV's and they both are saying the same thing. Yes, I have done reset, restore, etc. but nothing! Frustrated & out $10.
Apple TV (3rd generation), OS X Mountain Lion (10.8.3), 2 Apple TV's (3rd Generation).Good call!! Thanks a million. Glad I asked & thanks for the quick response. I was getting frustrated. Thanks again!!!!!
-
I just rented 2 movies on my Apple TV and now I am getting the message, "Your Apple TV is not authorized to play this content". Now I have 2 Apple TV's and they both are saying the same thing. Yes, I have done reset, restore, etc. but nothing! Frustrated & out $10.
Good call!! Thanks a million. Glad I asked & thanks for the quick response. I was getting frustrated. Thanks again!!!!!
-
I want to keep the pages above the section break as portrait, and the ones below I want to change into landscape. Is this possible? I can only get it to be one or the other but not both.
The work around is to do two documents, one in portrait format and one in landscape format. When finished export to Pdf. open in Preview by select both files and use Cmd + O or doubleclick. You can now in Previews thumbnail column the pages from one document into the other and then save.
If you have created only one with i.e. all pages in portrait format but with the content for the landscape pages rotated on the pages, you can rotate the pages in Preview. Two ways to get the same result. -
Recently we changed our Lynksys router to an Airport Extreme and now my MacBook Pro running 10.6.8 will not stream radio through Itunes without constantly rebuffering. Any ideas?
Recently we changed our Lynksys router to an Airport Extreme and now my MacBook Pro running 10.6.8 will not stream radio through Itunes without constantly rebuffering. Any ideas?
-
I bought my 6 plus last night decided to upgrade the IOS 8 like they suggest and now all I see is a white screen with the apple sign in the middle with an occasional flashing red screen. Did my new phone seriously just crash? What do I do now? I left it overnight with the white screen, thinking maybe it'll go away and needs time to upgrade. Woke up this morning, nope still white screen. Very disappointed with Apple. I was so excited to get my phone and can't even use it right now.
First turn the iPhone off and back on and see if it works. If that doesn't work then do a Reset by holding the Sleep / Wake Button (The Power Button) and the Home Button at the same time until the white Apple Logo appears, the release both Buttons and wait until a Full Reset occurs. The iPhone 6 should come back to your Lock-Screen. If that doesn't work then you could connect the iPhone 6 via the Lightning Cable to a Computer with a Current Version of iTunes. Then open iTunes on the Computer and wait until your see a Button that represents your attached iPhone and click on it. This should bring up a Summary Screen on the Computer within iTunes. At that point your can choose Update Software if an Update is available or Restore the iPhone to Factory Settings / New In The Box, or you could try to Restore from your Backup if a current Backup had already been saved from a previous iPhone.
If you don't have a computer with iTunes and you can get the iPhone back on, then go to Settings>General>Software Update and see if the iPhone is still on iOS 8.0 or if it is now on iOS 8.0.2 -
I want to increase my wireless network coverage upstairs and to the other side of my house. I have an airport extreme down stairs, can I get another one upstairs and hard wire it in?
Yes.
It has been covered recently. I as interested in same question matter of fact but I will have to look up details or you could search.
Bob Timmons has contributed to this question so look his up and find it as well.
See this link;
https://discussions.apple.com/message/18017606#18017606
Also this;
https://discussions.apple.com/message/18077215#18077215
Message was edited by: WilliamNewMart, to add links and correct spelling. -
I recently browsed ITunes UK store and now can't get back to my iTunes US store. The UK store won't accept my email address as it is in use. So, effectively, I can't make an iTunes purchase. And, this password changing is madness. Everytime I sign in iTunes doesn't recognize my password and so I have to get a new one even though I've answered the useless security questions. Has anyone solved this problem before?
Funny how this seems to be one of the most-asked questions on the Internet. In most cases, no answer is ever checked as "Correct," either. Most answers, as on this page, say to click the flag at the bottom right-hand corner of any store page. The problem? There's only one flag!!! And it's the one of the country we don't want to be in!!!
Just in case this helps someone: what worked for me was to sign in. It then told me my id was not valid for this country, and switched me back to the US. How I was ever able to buy something from the UK store in the first place is beyond me.
By the way, Apple, experiences like this, and many, many other horrible ones with iTunes, is why those of us who do not live in the Apple world continue to stick to their Microsoft PCs. -
I'm trying up upgrade to lion, but having issues. Then icon is on the screen but it says paused and I can't get it to start the download
Ah, okay. This is a message that comes up when a developer has developed software for the Mac, but has not registered with Apple. Apple does this to help keep viruses and malware out of your Mac.
To be able to run this, go to System Preferences and the General tap. At the bottom is the option to change this. Select the section "All applications downloaded from:" and change it to Anywhere.
Just be careful what you install after this and only download from reputable sites (like Apple.com).
Hope this helps! -
i just replaced my mac pro with an iMac and i can't get it to work with my epson stylus 3800 printer? i have downloaded the 3800 software three times and the imac keeps telling me there is no software to run the printer? Any help here?
Care to share which OS you are using?
-
I just purchased a new iPhone 5 and I can't get it to connect to my home network, which is ATT U-verse. Can someone help me?
Apps and music aren't part of the backup. App data is http://support.apple.com/kb/HT4946
Maybe you are looking for
-
It most often crashes when I am accessing a wmv file, but it has happened numerous times when I am asking nothing of it, just sitting there . I always check the boxes that send the report to headquarters and report the page I was on and all that, but
-
Display Crosstab query in DataGrid
Hi, I'm a Flex beginner. Could someone please help me how to display crosstab query result in DataGrid? The following query returns 6 columns: - First column: values in the field Sell_Channel - Second: Sum(Revenue Total) from the Revenue field. - Oth
-
File Attachments Temporarily Disabled
Any word when, or if, this "temporary" forum limitation will be lifted? Thanks, Jim Leichliter
-
TS1277 "iPhoto was unable to connect to Photo Stream" error after upgrading to mountain lion
Has anyone gotten this error after upgrading to mountain lion on a computer that already had a user setup on it? My iphoto was working with photostream and now it will not connect at all. I ran fix disk permissions and once it showed up in iphoto, ph
-
Hi, We have 1 standby db for my primary db. Connecting from standby db to primary db is disabled.(Port blocked). From primary to standby only opened. Archives are send by primary to standby and it is appliying perfectly. For testing purpose, We stopp