I could not see image file

During signing in my account, I can receive and open pdf file but I could not receive and open image file. It always appear a pop up message"Item has been deleted from conversation history". However, this problem does not occur when signing in with different account on the same computer. What should I do to fix this? Thanks !

What is the application release?
What is the database characterset?
Please see these docs.
How To Get a PDF Output From Statements in Release 12? Is There A Sample Template For AR Statements? [ID 603338.1]
AR Customer Balance Statement Letter /Statements Output is in XMLand not in PDF [ID 975501.1]
AR STATEMENTS ALWAYS PRODUCE POSTSCRIPT OUTPUT NOT PDF - HOW TO GET PDF? [ID 1013043.102]
Thanks,
Hussein

Similar Messages

Inline item mx:Image ... in mx:itemRenderer could not see the defination of method

I have following code and got a compilation error ("possiblely called an undefined function") because the <mx:Image ...> in the <mx:itemRenderer > could not see the defination of "aMethod" method:
<mx:Form ....>
<mx:Script><![CDATA[
private function aMethod(evt:Event):void {
           // code...
]]></mx:Script>
<mx:Canvas label="Tile View" width="100%" height="100%" >
          <mx:TileList id="photosTileList" dataProvider="{this.photoDP}" width="100%" height="100%" >
                    <mx:itemRenderer >
                        <mx:Component>
                            <mx:Image horizontalAlign="center" source="{data.url.text()}"
                                toolTip="{data.caption.text()}" width="55" height="38" complete="aMethod(event)"/> 
                        </mx:Component>
                    </mx:itemRenderer>
         </mx:TileList>
         <mx:Image .... complete="aMethod(event)"/> 
</mx:Canvas>
</mx:Form>
I do not know why the inline <mx:Image> inside <mx:itemRenderer> can not see the "aMethod" function defination in the same mxml file.
Any suggestions?

You need outerDocument, and the method cannot be private, it should be public:
complete="outerDocument.aMethod(event)"
If this post answers your question or helps, please mark it as such.
Greg Lafrance - Flex 2 and 3 ACE certified
www.ChikaraDev.com
Flex / AIR Development, Training, and Support Services

I am trying to import developed images from LightRoom 5 in o Photoshop 6. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another progra

I am trying to import developed images from LightRoom 5 Photoshop 6 for further editing. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, or you do not have necessary access permissions or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock the file. How do I fix this? I would greatly appreciate it if you would respond with terms and procedures that a computer ignorant user, such as me, will understand. Thanks.

Have you tried restoring the Preferences yet?

I am trying to import developed images from LightRoom 5 into Photoshop 6. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another progra

I am trying to import developed images from LightRoom 5 into Photoshop 6. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another program is using the file. Use the 'properties' command in the Windows Explorer to unlock the file'. This has not happened before. How do I change this?

Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
Mylenium

I keep getting an error on my MAC when i try to open any and all JPG FILES. How do I correct Adobe Reader could not open 'images rest 12-4.jpg' because it is either not a supported file type or because the file has been damaged (for example, it was sent

Adobe Reader could not open 'images rest 12-4.jpg' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).
that is the message how do i correct this problem

It sounds like your file associations are messed up and Reader is trying to open your .jpg files. Is this correct?
If so, you just need to change the associations to choose what application opens them. Here's how: Change File Associations in Mac OS X

I just opened asd file in cs6 but I could not see anything

I just opened asd file in cs6 but I could not see anything
I tried to open the psd file in cs6
the photoshop open byt without anything in it
I want to use kwik2 with it
I don't have cs5

What’s kwik2?
http://forums.adobe.com/thread/419981?tstart=0
Boilerplate-text:
Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)?

Could not print "image name" because there is not enough memory (RAM).

I cannot print anything from Photoshop CS5. I always get the message:
Could not print “image name” because there is not enough memory (RAM).
I'm using Mac OS 10.6.8, with 8 GB RAM. I have tried setting memory usage to 100% of RAM (7379 MB for me). The "Ideal Range" is 4058-5313 MB. I cannot print anything, not even a 20 kB file because I always get that error message.
I've tried unistalling & reinstalling, just to see if that did anything. It didn't help.
Does anyione have any ideas for what the problem is?
Thanks,
Dan
(I don't have a problem printing from any other programs, like Gimp, but I want to print from Photoshop because of they way it allows you to adjust what part of the image you print when you are cropping the image during printing.)

shanahan3030 wrote:
…have tried setting memory usage to 100% of RAM (7379 MB for me…
That is never a good idea. You're starving the OS of RAM. Try pulling it back to 70% or less.
Also, clarify how much disk space you have left on your boot drive and on your scratch drive.

ColdFusion could not delete the file

Good day all im getting this error. cant figure it out
"ColdFusion could not delete the file
c:\ColdFusion8\wwwroot\Jewel\images\stock\203083.jpg for an unknown
reason"
I tried installing the 801 update the patch using :
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb403622&sliceId=1
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb403411&sliceId=1
However this does not seem to be working,... but the file is
there...
Does anyone have a solution to this problem

you sure you have all hotfixes installed? this was definitely
fixed in
one of the recent ones...
also, i am no quiet sure about referencing [previous] cffile
inside
another cffile tag:
<cffile action="rename"
source="#dirlocation#\images\stock\#CFfile.serverfile#"
destination="#dirlocation#\images\stock\#FORM.code#.jpg">
see if setting a RESULT attribute in your cffile
action='upload' tag and
referencing that instead in your cffile action='rename'
solves the
problem...
Azadi Saryev
Sabai-dee.com
http://www.sabai-dee.com/

Could not save image, write busy

I have an iPod touch (4th generation). Every time I try to save an image, it doesn't save or show up in my photo album. I tried to save a photo from a photography app and it still did not save and a message popped up saying "Could not save image; Write busy". I have tried deleting some photos, thinking there may not be space for any more, but it has not worked. Screen shots won't even save.
Anyone know what this means or how to fix it? Thanks in advance!

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Try anotheer image. One that appears to be a small file size.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

I have a MacBook pro version 10.6.7 with snow leopard. After an scheduled software upgrade I could not open Quicken (It said it could not open the files). Now I can only open it if I have my external drive on. Can you help?

I have a MacBook pro version 10.6.7 with snow leopard. After an scheduled software upgrade I could not open Quicken (It said it could not open the files). Now I can only open it if I have my external drive on. Can you help?
All the information that I had input on Quicken is gone. I have to have the external hard drive that I use to back up to be able to use quicken now. It is as if it was erased from the laptop hardrive

Try repairing permissions. My favorite way is with a utility called AppleJack. Info and download here. It's free. It only works when you boot in Single User Mode. When restarting or booting, hold down the Command key and S keys.
You will get a very different startup screen that looks like the Terminal app has hijacked the screen. Just let the lines of text scroll by. When that happens you will get a text entry prompt. Type in "AppleJack" without the quotation marks.
A DOS looking menu will appear. Choose 1 or d to run Disk Repair. If you get a message that Disk Repair found and corrected errors, run it again. Repeat until you get the "your disk appears to be ok" message. This rarely happens with my experience, though. This does the same thing as as booting from an external drive and running Disk Utility's repair. Only, no external drive is required!
Next, choose 2 or p to repair disk permissions. This will take a little while. AppleJack warns that it will take up to an half hour to run repair permissions. It'n never taken more than about ten minutes for my MacBook Pro.
As permissions are repaired, you will see each repair scroll on the screen. When done, the menu returns, choose q to quit. Then at the prompt, enter "exit" without the quotes. Your MacBook Pro should restart into Mac OS normally after this.
Hope this helps.

Could not save because file was already in use or left open

I am have several problems with Adobe Photoshop CS4. I call up Adobe for help, I pay 50.00 or 60.00 for their help with these situations that I am having. Adobe concludes the phone call saying they are closing the case cause the problem has been resolved. I told them it has not been resolved I am still having problems then the person hangs up on me. I call back cause the problems still persists, the tech person told me that I had to pay another 50.00-60.00 for the
tech support. I told him that I already paid and that I still need help, the tech guy told me that the case was closed cause it was resolved. I told them it was not
resolved and I am needing help with this particular issue. The tech person kept saying that the issue was resolved and if I needed more help that I had to pay.
This time I hung up on him and while I did that I said that the Apple Support Community was way more helpful and it was free.
So here I am 6 months later and tried everything, Here are the problems that I am having.
1. CS4 keeps quitting unexpectedly with no cause no error nothing. The blue light under the CS4 Ps is still lit and wont let me reopen the file, I then have to force quit the program. I then get these windows asking if I want to send a report, I click ignore cause I am tired of filling out those things. So I try to open the
photoshop file and I get the blue window with the Ps logo on it, its scanning everything but then it stops responding when the scan reaches the part where it says scanning memory and freezes. I then have to force quit the program again, I have to do this 5 times before it will open the file. Then Ps will unexpectedly quit after 2 hrs of working and starts the B.S. all over again. I dont know what is wrong with CS4. Other times it runs really slow and glitchy. It also happens on my Mac Book Pro, iMac and of course my Mac Pro.
I know its not the computers or the settings or anything interacting with it. I checked everything extensively from the terminal to permissions and back to the program itself and everything in between. I am needing help, the Adobe forums are of no use, I cant find anything there.
2. I keep getting this error and I am not sure what it is, this only happens when I use Ps CS4 and yes it happens on all my other Apple computers.
Error: "could not save because file was already in use or left open" not sure how to fixt this, I have already tried the permissions and it did not seem to work.
All my computers run OS X Lion version 10.7.3. I had these problems even before I upgraded to Lion, 2 months later after Lion came out. These problems have been going on since Snow Leopard. All my Macs are up to date and I did use the Disk Utilities on everything... Please help me.

First off are you editing a photo that you have placed into indesign if so the in use or left open issue is a common one, the only help is to go to indesign move the picture by nugging it then go back to photoshop and try saving again, if this does not work close the indesign file then save.
On the other issue of photoshop crashing, One thing I would try would be to create another user account, Start up photoshop and only it and work with it. The reason why is to see if maybe there are some 3rd party software you have loaded on your systems that might be causing the issues. "Ya never know"
I would assume you have reinstalled photoshop on lion. Do you still have older version of OSX installed, if so try booting to them and working with photoshop to see if it works there.
Good Luck

Lion 10.7.4 Console: Could not find image named 'ForwardArrow'.

I found following message presented in syslog since today evening, however, the system is running fine so far.
12-5-22 下午10:25:44.345 Console: Could not find image named 'BackArrow'.
12-5-22 下午10:25:44.345 Console: Could not find image named 'ForwardArrow'.
could someone to explain what was caused this error message? and how can I solve the problem

It could mean that these two files are missing from the Console.app, where it should go into the folder Resources of the folder Contents. For some reasons, they don't seem to get installed with Lion under certain circumstances.
Right-click Console.app (in the Applications/Utilties folder) and open those folders, then copy the two files BackArrow.png and ForwardArrow.png into the Resources folder).
On my machines, this helped the messages go away (end even stopped some sporadic freezing :-)
I just took the corresponding files from the Console.app of my previous Snow Leopard installation (same place).
HTH

Error: Could not find the file "flash.ocx"

I have been receiving the error COULD NOT FIND THE FILE
"FLASH.OCX" for the past couple of months - I have been watching
the message boards and have seen a lot of "fixes" and beta's come
up errors (not sure that it's this exact error though).
I get this error continuously throughout the day - no matter
if I have nothing running on my computer or I have 10 things open.
This morning it occurred to me that my screen saver is not coming
on and it seems to me that the above errror is popping up everytime
my screen saver should start. I HAVE TIMED THIS TODAY AND CHANGED
HOW LONG BEFORE MY SCREEN SAVER STARTS - AND IT IS DEFINITELY
GETTING THE ERROR EVERYTIME THE SCREEN SAVER IS TRYING TO START.
Last week, I deleted the version of Flash that I had and then
re-installed; still getting the error.
I was getting the error when I had IE6 so I thought maybe
switching to IE7 would correct it - but it didn't (that was a few
weeks ago).
My computer does not freeze up but it is SOOO annoying to
continually throughout the day get this error.
IE7.0
ADOBE 9,0,28,0
WINDOWS XP - SP2
PLEASE HELP!

Ah-ah! The workaround is to map my network folder to a drive, say... M:\
So, when I select Edit->Edit in Audition->Sequence, I can select the Browse button to alter the Path destination. Instead of seeing '\\Zeus\Projects\...', I select the mapped M: drive so the path reads 'M:\Projects\...' instead.
Then, Audition loads and is able to find the sequence or clip.
So... that solves my problem!

Reloaded Photoshop CS5 (New Machine) and now it won't open, geta message "Could not open scratch file because disk is not available", so pS won't go any farther.

reloaded Photoshop CS5 (New Machine) and now it won't open, get a message "Could not open scratch file because disk is not available", so pS won't go any farther.

If prefs are the same as Settings on a MAC, OK, it would have been more
clear to me if you had said Settings since I didn't see anything related to
prefs. On a PC, I know what you mean, On a MAC, wasn't sure.
In a message dated 4/9/2015 9:13:48 A.M. Eastern Daylight Time,
[email protected] writes:
reloaded Photoshop CS5 (New Machine) and now it won't open, geta message
"Could not open scratch file because disk is not available", so pS won't go
any farther.
created by c.pfaffenbichler
(https://forums.adobe.com/people/c.pfaffenbichler) in Photoshop for Beginners - View the full discussion
(https://forums.adobe.com/message/7421714#7421714)

After upgrading iOS to 7.0.4, I could not transfer:pdf files from email to ibooks ???

Help anyone ???
After upgrading iOS to 7.0.4, I could not tranfer pdf files from email to ibooks.
Previously, i would see a message asking for tranfering my word doc to pdf file and pdf file to store in ibooks...

You need to use the forward box (box with an upward arrow).
This link will tell you what to do: http://support.apple.com/kb/ht4227

I could not see image file

Similar Messages

Maybe you are looking for