I currently have iPhoto 6.0.6, and can no longer order books.  Do I have to get a new operating system, or just update my iPhoto to the next level.

I currently have iPhoto 6.0.6.  I am no longer able to order books from this iPhoto.  Can I upgrade to the next iPhoto without purchasing a new operating system?

This thread might help: what does this mean "We apologize for the inconvenience, but the ability to order books and prints is no longer supported in iPhoto 5. Please upgrade to a newer version of iPhoto to order these products.

Similar Messages

  • I have a Mac OSx 10.6.8 and iPhoto 7.1.5 and can no longer order printed photo albums unless i install new version of iPhoto. But reviews of new iPhoto so negative. Should I install it or steer clear of it??

    I have a Mac OSx 10.6.8 and iPhoto 7.1.5 and can no longer order printed photo albums unless I update to new version of iPhoto. But reviews of new iPhoto are so negative that I am uncomfortable about buying it. Will it be fine or should I steer clear of trouble and accept that i can no longer publish my photos?

    iPhoto '11 is working well.
    The reviews usually only show the comments of people who do not like the changed features.
    To get an idea what to expect, when you upgrade, look at the iPhoto '11 support sites.
    The video tutorials: http://help.apple.com/iphoto/index.html#button-0
    Browse the help, to see how it works:  http://help.apple.com/iphoto/index.html#button-1

  • HT3669 I have an Epson Perfection V100 and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

    I have an Epson Perfection V100 and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

    Check the Epson web site for updates to drivers and Epson scan software.

  • IPhoto Upgrade iBook G4 so can continue to order books & prints?

    Hi,
    Trying to determine the lowest v iPhoto upgrade for continued ability to order books and prints...would that be the iPhoto version in iLife 05? ...don't want/need GarageBand, iDVD, etc., just iPhoto! Recommendations appreciated.

    This page
    http://www.apple.com/support/photoservices/ordering_options/
    tells us that you can order books with v6 or later.
    You can place orders for Print Products using iPhoto 6, iPhoto '08, and iPhoto '09, as well as Aperture 2.
    As you're on 10.4.11 you might want to go to iPhoto 08 as it's the highest you can run, and will probably be easier to find. Note that you cannot upgrade to any version without purchasing the iLife suite.
    Regards
    TD

  • HT201304 ? I have forgotten my restrictions passcode and can't make any changes. I have already did a reset with iTunes but it still didn't help. The restrictions lock is still there.

    I set a restrictions passcode and have completely forgotten it. I have tried to reset with iTunes but it just clears out my phone and when I turn it back on its still locked in the restrictions menu. U can't do a reset on your phone without it... So I don't know what to do.. Help!!!

    There is no default code.
    - Place the iOS device in Recovery Mode and restore via iTunes. For how to restore: iTunes: Restoring iOS software
    You have to either:
    - Restore from a backup that was make before you added the Restrictions passcode. If you restore from a backup made with the Restrictions passcode the Restrictions passcode is also restored.
    - Restore to factory settings/new iPod

  • I have a iphone 4s my phone ringer is not working.  I have gone to settings, sound and can't find anything turned off., I have a iphone 4s my phone ringer is not working.  I have gone to settings, sound and can't find anything turned off.

    My phone ringer will not work.  I have gone to settings and sounds and have the volume up all the way.  The vibrate setting is off.

    settings - notification - message - show preview - off

  • I recently upgraded from Snow Leopard to Mavericks and can no longer share files, does anyone have suggestions?

    I had to set up an appointment with the local genius bar to install Mavericks as I use WiFi and am very close to mountains which tend to interfere with clean downloads.  I am now unable to send work product via email as a PDF - I'm hoping someone has suggestions for me - or should I just make another appointment?   My thanks, Bobbie4886

    There could be many ways to be "unable to send work product via email as a PDF."
    Can you no longer create PDFs from your work product?
    Can you no longer find the PDFs when you try to attach them to an email?
    Do you get an error message when you try to attach them?
    Do you get an error message when you try to send the email?
    Does the email with the attachment disappear without a trace?
    Does your recipient not see the attachment?
    Does your recipient get an error message trying to open the attachment?
    Something else? What?

  • What do Ido if I have paid for a mag and can't download it

    What do I do when I have paid for a mag and can't download it on my I pad air .i am new to this

    Hi Travelnight104,
    Welcome to the Support Communities!
    The article below explains how the Newsstand app works:
    iOS: Using Newsstand
    http://support.apple.com/kb/HT4943?viewlocale=en_US
    If you are still unable to access your purchase after reviewing this information, contact the iTunes Store Support team:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/HT1933?viewlocale=en_US
    I hope this information helps ....
    - Judy

  • The context has expired and can no longer be used

    I am running across a repeatable error when accessing a specific Site Collection. EVERY TIME the SC is loaded we receive the error 'The context has expired and can no longer be used'.
    I have already validated the SharePoint servers' time zones are all the same and match the web application(s), as well as set the 'Web
    page Security validation' to "Off".
    What else could I be missing? Could this have anything to do with Distributed Cache?
    - Rick

    Hi,
    We just began to have the same error. The servers are also correctly set for the timezone (UTC) as well as the Web Applications.
    The error happens for every site collections, there isn't a specific site where I'm able to reproduce the issue.
    This is the ULS :
    05/27/2014 12:59:05.98 w3wp.exe (0x1524) 0x0780 Web Content Management Publishing Cache ahh6l Verbose CreateListItemFromUrl : Parameters url : '/sitename/SitePages/Home.aspx', enableCheckedOutItem : 'True', checkedOutByCurrentUser 'False' retVal Id = '4618889e-0e1c-4503-a7fb-70fd36e2661d'. 01ff949c-98cc-d0fb-9795-c691c2852f54
    05/27/2014 12:59:05.98 w3wp.exe (0x1524) 0x0780 Web Content Management Publishing Cache ahh6l Verbose CreateListItemFromUrl : Parameters url : '/sitename/SitePages/Home.aspx', enableCheckedOutItem : 'True', checkedOutByCurrentUser 'False' retVal Id = '4618889e-0e1c-4503-a7fb-70fd36e2661d'. 01ff949c-98cc-d0fb-9795-c691c2852f54
    05/27/2014 12:59:06.00 w3wp.exe (0x1524) 0x0780 SharePoint Foundation Runtime tkau Unexpected System.Runtime.InteropServices.COMException: The context has expired and can no longer be used. (Exception from HRESULT: 0x80090317) at Microsoft.SharePoint.Library.SPRequestInternalClass.SetHttpParameters(String bstrHttpMethod, String bstrRequestDigest, UInt32 flags, Guid gTranLockerId, Byte[]& ppsaImpersonateUserToken, Boolean bIgnoreTimeout, String bstrUserLogin, String bstrUserKey, UInt32 ulRoleCount, String bstrRoles, Boolean bWindowsMode, String bstrAppPrincipalName, Boolean bIsHostHeaderAppPrincipal, String bstrOriginalAppPrincipalIdentifier, ApplicationPrincipalInfo& pAppUserInfo, Boolean bInvalidateCachedConfigurationProperties, Int32 lAppDomainId, ISPManagedObjectFactory pFactory, Boolean bCallstack, ISPDataCallback pCanaryCallback) at Microsoft.SharePoint.Library.SPRequest.SetHttpParameters(String bstrHttpMethod, String bstrRequestDigest, UInt32 flags, Guid gTranLockerId, Byte[]& ppsaImpersonateUserToken, Boolean bIgnoreTimeout, String bstrUserLogin, String bstrUserKey, UInt32 ulRoleCount, String bstrRoles, Boolean bWindowsMode, String bstrAppPrincipalName, Boolean bIsHostHeaderAppPrincipal, String bstrOriginalAppPrincipalIdentifier, ApplicationPrincipalInfo& pAppUserInfo, Boolean bInvalidateCachedConfigurationProperties, Int32 lAppDomainId, ISPManagedObjectFactory pFactory, Boolean bCallstack, ISPDataCallback pCanaryCallback) 01ff949c-98cc-d0fb-9795-c691c2852f54

  • Upgraded to Yosemite and can no longer remote into my work iMac through screen sharing- it is turned on in settings?

    My screen sharing functionality did not show up in the dock with an updated icon.  It had a question mark- shows my connections but nothing works, I did make sure screen sharing is on and also connected to VPN.  Once I tried to launch screen sharing nothing happens.  Such an elegant solution in Mavericks not does not work. Ugh. Help!

    This is the post that got me set up- I too am running an older version at work vs. Yosemite. As soon as I followed is advice everything worked.
    Upgraded to Yosemite and can no longer remote into my work iMac through screen sharing- it is turned on in settings?
    I believe the location of the "Screen Sharing" app has changed, which explains why if you had it in the dock it has been replaced by a ?
    Don't forget you can launch screen sharing (once your VPN connection is up) by typing in the Safari destination slot vnc://remotemachinename:portnumber  (omit the :port number if you are using the default VNC port, 5900).  This should launch Screen Sharing and put its icon in the dock.  You can drag the Screen Sharing icon to the left of your dock and it will hopefully remain there after you exit Screen Sharing, or you can right-click on the icon when it's running and select Options->Show in Finder to find out its new location and drag its icon to the permanent entries in your dock.
    Hope this helps; worked for me.

  • Error 1328.Error applying patch to fileC:/Config.Msi/PTEADA.tmp.It has probably been updated by other means, and can no longer be modified by this patch.For more information contact your patch vendor

    hello,
    After installing the Adobe reader, I got the following error message:
    Error 1328.Error applying patch to fileC:/Config.Msi/PTEADA.tmp.It has probably been updated by other means, and can no longer be modified by this patch.For more information contact your patch vendor

    For AA XI, you only need the 11.0.09 patch. Download from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows (Use "MAC" if a MAC is used).

  • New operating system and now itunes library is blank. How can I get it back?

    My computer got messed up and I ended up having to get a new operating system put on it. Now my itunes library is blank and my ipod says it can't synch (obviously) because it doesn't recognize the library. How do I get my old library back?

    It has always been very basic to always maintain a backup copy of your computer.
    Use your backup copy to put everything back

  • I have iphoto 7. I need to order additional copies of a wedding album. When I try, it tells me that I can no longer order on iphoto 7 and I need to upgrade. When I try to upgrade, it tells me tat I can't upgrade because I have OSX 10.6.8  What can I do

    I have iphoto7. I need to order additional copies of a wedding album I creared LESS THAT A YEAR AGO!!!. Apperently I can no longer order on iphoto 7 and cannot download the upgrade on my OSX 10.6.8 system What can I do?

    Your profile signature is confusing. There it says "iPhoto '08, OS X Mountain Lion (10.8)".  But your question mentions older systems:  " iphoto 7 and cannot download the upgrade on my OSX 10.6.8 system"
    Do you have two different Macs? If you have a second mac with OS X Mountain Lion (10.8), you could upgrade that to MAvericks and buy the most recent iPhoto '11, version 9.5.1 from the App Store. That would be the least expensive solution to upgrade your iPhoto.
    If you only have iPhoto 7 on OSX 10.6.8, you can can buy the boxed iLife '11 installer package from Amazon. This will install an early version of iPhoto '11, that runs well with your current system and will let you print your book.  You will need to run the iPhoto library upgrader to convert your old library, see:  iPhoto '11: About the Library Upgrader
    Also, you  should be aware, that upgrading your library may change the book layout a bit, because the themes have changed between the versions, so you need to keep a backup copy of the library and iPhoto 7, to be able to compare the upgraded version to the original.
    -- Léonie

  • I have a MacBook Air and recently downloaded the new operating system. Since that time, I am no longer able to access my personal ITunes library to add music to IPhoto slideshows.  I put I tunes library on my desktop, as suggested. How do I drag it?

    I have a MacBook Air and recently downloaded the new operating system, 10.10 OSX Yosemite. Since that time, I am no longer able to access my personal ITunes library to add music to IPhoto slideshows.  I put I tunes library on my desktop, as suggested. How do I drag it to the I Photo slideshow?

    That crash appears to be casued by the Facebook plug-in.
    Create a new account (systempreferences -> accounts or Users & Groups on 10.7 and 10.8), make a new Library in that account, import some shots  and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.

  • I currently have the Mac OS X v10.5.8 and want to get the new operating system but I don't know how to do it. I don't have the Mac App Store and can't get it because of my version. What do I do?

    I currently have the Mac OS X v10.5.8 and want to get the new operating system but I don't know how to do it. I don't have the Mac App Store and can't get it because of my version. What do I do?

    The Early 2006 model 1,1 Core Duo can only run a maximum of 10.6 Snow Leopard. The models Late 2006 Core 2 Duos 2,1 through Early 2008 4,1 can only run a maximum of 10.7 Lion. The Late 2008 model 5,1 Aluminum Unibody through the Mid 2010 White Unibody model 7,1 can run 10.8 Mountain Lion.
    To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up check the Model Identifier and post it back here.
    The Snow Leopard 10.6 DVD should still be available from Apple for $20. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775 to purchase it. It may still be in the Legacy Products list.
    If they no longer have any in stock you will have to buy it from eBay or Apple resellers that still have stock. But you will have to pay a premium since the DVDs are no longer being made. Snow Leopard DVDs are already up to $100 on Amazon.
    http://www.ebay.com/sch/i.html?_nkw=10.6+snow+leopard&_sacat=0&_odkw=mac+os+10.6 &_osacat=0
    Once you are at 10.6.8 Lion is still available from Apple. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775. to purchase it. Then within 3 days you will get an email with a code which you can use to download Lion from the App Store.  The price is still $29. You must have at least a model 2,1 MacBook.
    Lion will require at least 2gb of RAM but really needs 4gb to run smoothly.
    As for third party programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table
    Also Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
    Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.

Maybe you are looking for

  • Calling Stored Procedure by clicking a button.

    Hi, I am developing an application using Oracle JHeadstart 10.1.3 Preview Version 10.1.3.0.78 I want to call Stored Procedure using a parameter from a jspx page. In a jspx page I want to put a button. When the button will be clicked, it will send the

  • Fraud by vendor advertizing on Firefox

    I responded to a email on Firefox by Ascentive for a program to speed up my computer for $37.50 and this I agreed to since then they have charged my credit card $129.00 on 9/16/2011 and again on 10/16/2011. I have called numerous times to get these r

  • Fm  for pending  po  and  purchase requisition qty

    hi  every one .... can  any one  know  any   fm  for  pending  po and  purchase requisition qty.

  • Need To Change Write Speed in DVDSP

    I have a buttload of blank DVD-Rs that will write only at 4X or below on my system. When I use any app that lets me change the speed to 4X or lower, they work fine. However, DVDSP always blows up when it gets to the write, and I am not smart enough t

  • How to create form in ConsoleExtension Application?

    I have WebLogic Console extension application. I would like to submit a form to update the data. How would I create a form? What servlet does the console use? I tried using Struts' Action servlet. I am getting following error. javax.servlet.jsp.JspEx