I deleted gardens of time yesterday and need to get it back with the current data and progress. Is this possible?

I deleted gardens of time yesterday and need to get it back with the current data and progress. Is this possible?

Is that on an iPad, iPod Touch or iPhone?

Similar Messages

  • I cannot connect to the internet. I think I have my settings all out of whack now and need to get them back to the way they were when it was working. (I know my wireless router is working because my Dell has no problem connecting to the internet.)

    I cannot connect to the internet on my iMac through my wireless router. I think I screwed up the settings and need to reset them. I know the router is working because I can access the internet on my Dell laptop which is located right next to my Mac.

    On your iMac try the following, in order, until (hopefully) resolved:
    1a. Delete Preferred Network(s)
    System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
    Under "Preferred Networks," delete the network(s) you regularly use from the list.
    1b. Delete AirPort Keychain Entries
    Launch the "Keychain Access" application located in Applications/Utilties.
    In the windows on the left side: Select login for Keychains and "All Items" for Category.
    Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
    1c. Add Preferred Network(s)
    System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
    Add the preferred network(s) using the "+" button.
    Restart or log out then back in.
    2. Move System Configuration Files
    (Note: You will have to reestablish your network connections settings.)
    Go to /Library/Preferences
    Move the SystemConfiguration folder to the desktop.
    Restart your Mac. (Note: OS X will rebuild the files that are now sitting on your desktop. If this doesn't resolve the issue, you can move the folder back to it's original location.)

  • I accidentally got rid of my whole toolbar and need help getting it back. Is there a way to do this?

    When I was doing a Facebook screenshot I needed to widen the picture (not even thinking about using the maximize and minimize tool) so I right-clicked and unchecked all of my toolbars. I reeeeeally need them back so I need a way to get them back... this is where you guys come in...
    P.S. Here's a pic of my dire situation:
    http://i1204.photobucket.com/albums/bb412/CausedChernobyl/HELPME.jpg?t=1285042433
    don't ask how i got the url w/out a toolbar :( it was hard

    Firefox 3.6+ versions have a feature to allow the user to hide the Menu bar.
    Hit the ''Alt'' key to temporarily show the Menu bar, then open View > Toolbars and select Menu bar, so it has a check-mark.

  • I Need to Write the current Date and Time

    I need to write the current date and time to calculate the spend time in each instruction.
    What is the instrucion?
    Thanks.
    MIGUEL ANGEL CARO
    [email protected]

    The current time can be determined with a Date object:
    Date now = new java.util.Date() ;or if you are interested in the seconds since the epoch:
    System.currentTimeMillis() ;If you wanted to print them out:
    System.out.println( new java.util.Date() ) ;
    System.out.println( System.currentTimeMillis() ) ;Kenny

  • I deleted my Iphoto and need to get it back! I bought this mac book off my sister and have none of the install disks. If there a download or something that I can get to reinstall it?

    I deleted my Iphoto and need to get it back! I bought this mac book off my sister and have none of the install disks. If there a download or something that I can get to reinstall it?

    Depending on the age of your machine and the version of iPhoto, you may be able to download it from the App Store - but you'll need her account details to do so.
    Other than that you'll need to purchase it on the App Store.

  • How to get the current data and time of SCOM server via SCOM SDK (API) calls?

    Hi,
    I need to read the current date and time of SCOM server via SOM SDK.
    Is there a class in SDK that provides this info ?
    Thanks,
    satheesh

    To get time and date of Alerts of SCOM, You can use following command let "get-scomalert"
    Also, You can refer below links
    http://blog.tyang.org/2013/02/21/using-scom-2012-sdk-to-retrieve-resource-pools-information/
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical

  • How to display the current Date and time in xslt version 1

    i am using xslt version 1 .i want to display the current date and time in the output xml using xslt(Jdeveloper) ..i just added the namespace xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
         xmlns:ns1="urn:oracle:integration:b2b:7D30046DC68A4FA689956D8241FA3B99">
    and used thsi function <xsl:value-of select = "xp20:current-date()"/>
    but it does not works for me ..help needed????
    Edited by: user9519185 on Jan 20, 2009 3:04 AM

    Use a formula: =NOW()
    Format the cell for Date and Time, with both the Date part and the Time part displayed. Format the two parts as you wish, using the choices in the Inspector's menus.
    The cell will update each time the table is recalculated.
    (Description is for Numbers '09 (Mac), Numbers for iOS will be similar, but not necessarly identical in details.)
    Regards,
    Barry

  • I'm trying to display the current date and time on my iPad.

    First, I'm not sure this is a valid post to this forum.  If not, I'd appreciate knowg in where I can get help. 
    I have tried several ways to display the current date and time on my iPad.  None  work.  Most things I try give me complier errors but the latest code compiles but won't display the correct time. 
    Here's the dispatch code in my ViewController.m file:
    dispatch_queue_t queue = dispatch_get_global_queue(DISPATCH_QUEUE_PRIORITY_HIGH, 0ul);
        dispatch_async(queue, ^{
            [NSTimer scheduledTimerWithTimeInterval:NSTimeInterval)1.0f target:self selector:@selector(updateLabel:) userInfo:nil repeats:YES];
    Here's the updateLabel code: (which never gets executed).
    - (void)updateLabel:(id) sender {
        dispatch_sync(dispatch_get_main_queue(), ^{
        NSLog(@"Datefield Update Called");
        NSDateFormatter *dateFormatter = [[NSDateFormatter alloc] init];
        [dateFormatter setDateFormat:@"EEEE, MMMM dd, yyyy 'at' HH:mm  ZZZZ"];
        NSDate *dayTime = [NSDate date];
        NSString *formattedDateString = [dateFormatter stringFromDate:dayTime];
            _dateField.text = formattedDateString;
        [self.view addSubview:_dateField];
        NSLog(@"Datefield %@",_dateField.text);

    Your code is needlessly complicated and has a few problems:
    // These objects should be created only once.
    NSTimer *dateAndTimeTimer; (You might need to make this a property with a strong reference).
    NSDateFormatter *dateFormatter = [[NSDateFormatter alloc]init];
    [dateFormatter setDateFormat:@"EEEE, MMMMM dd, yyyy 'at' HH:mm ZZZZ"];
    // The subview should only be added once.
    [self.view addSubview:_dateField];
    [self performSelectorOnMainThread:@selector(startDateAndTimeTimer)
                            withObject:nil
                         waitUntilDone:YES];
    -(void)startDateAndTimeTimer
        NSTimer *timer = [NSTimer scheduledTimerWithTimeInterval:1
                                                          target:self
                                                        selector:@selector(updateLabel)
                                                        userInfo:nil
                                                         repeats:YES];
        dateAndTimeTimer = timer;
        [[NSRunLoop mainRunLoop] addTimer:dateAndTimeTimer forMode:NSRunLoopCommonModes];
    -(void)updateLabel
         NSDate *dateTime = [NSDate date];
         NSString *formattedDataString = [dateFormatter stringFromDate:dateTime];
         _dateField.text = formattedDateString;
         NSLog(@"_dateField.text=%@", _dateField.text);

  • I deleted photobooth by accident and i have tried to get it back with the setup disk, i got imovie and garageband back but not photobooth. Any ideas?

    i deleted photobooth by accident and i have tried to get it back with the setup disk, i got imovie and garageband back but not photobooth. Any ideas?

    PhotoBooth is not on the iLife disk which has iMovie and Garage Band.  PhotoBooth is integrated into OSX, so it's not going to be easy to get back.  You'll need to get it from the recovery disk or partition.  Which OSX are you using so we can point you in the right direction.  NEVER delete any of the OSX programs.

  • My iPad will not charge and every time I charge it. It comes up with the iTunes icon and I will not charge, it is not a new I pad and the same charger I use for the I pad I use for my I phone and it will charge. What is wrong?

    My iPad will not charge and every time I charge it. It comes up with the iTunes icon and I will not charge, it is not a new I pad and the same charger I use for the I pad I use for my I phone and it will charge. What is wrong?

    What exactlyare you seeing on the iPad's screen ? If it's the iTunes icon and a cable then that means that it's gone into recovery mode - you will need to connect it to your computer's iTunes and you should be able to use that to reset it back to factory defaults and you can then restore/resync your content to it.

  • I want to use Get Panel Image in Labview 5.0.1 and need details on how to save the BMP data generated

    I am trying to generate an application that saves a copy of its front panel on completion. This is easy to do using an invoke node with Print VI to HTML but this does not work in an .exe format. I have seen elsewhere that you have to use the Get Panel Image method, but no details are supplied in LV 5.0.1 documentation of how to use the "image" data (1-D Unsigned Byte array) that is generated. I want to save this in a format that can then be read as a bitmap in any standard graphics package. Any assistance?

    Hi,
    If you'd upgrade to LV5.1 or 6 you could use the 'standard' vi's for this.
    You need a VI called "Write BMP File.vi". It's not shipped with LV5.0.1.
    This vi only uses 3 subVI's, so perhaps someone at NI can convert it and
    send it to you (sorry, I won't, it's copywrited).
    If you cannot get this VI anywhere, you'll need to figure out the BMP file
    format yourself. It's not too complicated, but still could take some days.
    Perhaps someone figured it out before LV5.1 was released.
    Regards,
    Wiebe.
    "RDK" wrote in message
    news:[email protected]..
    > I want to use Get Panel Image in Labview 5.0.1 and need details on how
    > to save the BMP data generated
    >
    > I am trying to generate an application that saves a copy
    of its front
    > panel on completion. This is easy to do using an invoke node with
    > Print VI to HTML but this does not work in an .exe format. I have seen
    > elsewhere that you have to use the Get Panel Image method, but no
    > details are supplied in LV 5.0.1 documentation of how to use the
    > "image" data (1-D Unsigned Byte array) that is generated. I want to
    > save this in a format that can then be read as a bitmap in any
    > standard graphics package. Any assistance?

  • Wrote the current Date and Time in the backend

    HI everyone,
    I created a table view, where I display several records. Right now I will add an record to this table, which should be written back in the backend and automaticaly add the current date and time.
    But I don´t know to make this. I tried several time with the funktion  "now()", but it doesn´t work. So any help for me, to explain how I can display the actual time and then write it back to the backend?
    Thanks

    we use a crm system. but the BAPI I mentioned was
    just to play with. My basis will develop a new API
    for the project, that have the requested Inputfields.
    But what I tottaly forget was, that there has to be a
    field for the time, so thanks for the advice.
    No Problem.
    I´m still of the opinion , that it should be possible
    to add the curret time in a field with the
    funcionality of the VC, even there is a way to show a
    clock with the current time. My problem is that I
    can´t figuer out how to do this.
    Therefore you can use the TNow() function (Time functions) and the Now() Function (Date functions). You can cast them to a string and concatenate the string, then you have the date of today with the current time. This string you can format and transfer it as input for your BAPI_ADD_BP for example.
    Hope that helps.
    Best Regards,
    Marcel

  • Put the current date and time in a string

    I am having trouble trying to put the current date and time from my Calendar object into a string
    any ideas?

    Calendar timeCal = Calendar.getInstance();
    timeCal.setTime(new Date(System.currentTimeMillis() - startTime ));
    String date = formatToTwoDigits(timeCal.get(Calendar.HOUR_OF_DAY))     + ":" +
    formatToTwoDigits(timeCal.get(Calendar.MINUTE))          + ":" +
    formatToTwoDigits(timeCal.get(Calendar.SECOND));
    private String formatToTwoDigits(int i) {
    String ret = null;
    i = i % 100;
    if (i < 10) {
    ret = "0" + Integer.toString(i);
    } else {
    ret = Integer.toString(i);
    return ret;
    You can figure out yourselve how to display the date, use other Calendar.XXX properties.
    Good luck!

  • My photobooth deleted and I cannot get it back- put starter disk in and not an option to recopy..help

    My photobooth deleted and I cannot get it back- put starter disk in and not an option to recopy..help!

    Try the suggestions here to see if they resolve your problem:
    http://support.apple.com/kb/ts1559
    If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

  • Get the Current Date and Time of a Location

    I have created a windowsPhoneApplication in silverLight 8.1.In my application,I have to upload videos on some server.The Uploading get failed If the Date and Time settings of my device is not the current Date and Time.So How can I get the current date
    and time even if the device settings is wrong?

    Hi shifana,
    Do you know server's time zone? If yes, you can manually translate to the correct time zone.
    Otherwise try some online time acquire API.
    --James
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

Maybe you are looking for