I did something stupid - need help

I'm using iWeb for sharing photos, podcasts, etc. A week ago while editing, I accidently renamed my web-site, which is the name at the top of the site organizer. Consequently, this changes the address and the links I sent to people no longer work.
What is the default name which is used to publish to .Mac?
Help!

As long as you have only one site, it doesn't matter. The following will work (and your site name will automatically be added).
http://web.mac.com/yourdotmacname/iWeb
However, if you already gave out the long name to your friends and can't remember what it is, why not ask one of your friends? (I'd ask one that already owes me big time!)
One other thought. If you did NOT publish with the incorrect name, simpy open your browser and enter the short name and you'll see the old site name yourself.

Similar Messages

I don't care if you think i did something stupid just help me.

So here is what happened. A while ago i accidentaley left my ipod out in a full downpour. It survived but it started doing weird things like when i tried to watch a video it would enter the video thing and for a few seconds the screen would go black. Then it would go back to the menu and then i could watch the video. later on it started totally freezing up and so i restarted it. when i did it showed little sad ipod. so i did it again and it started acting normal. later it started clicking sometimes while i was using the buttons. i now realize that is the hard drive. after that LCD juice in the screen starting coming out so i sent it in to get repaired. after a while i was so fruastrated with my ipod clicking and screwing up i started banging it on my couch and bed mattress. That made it freeze for a few seconds every time i pushed the buttons. i banged it on things some more and now what happens is every time i restart it it shows sad ipod. so i restart it again and this time it starts clicking, and it switches between the apple logo and the sad ipod twice, then says connect to computer to restore. so i connect it and now it switches between apple, sad ipod, and +very low battery, please wait+ for about 30 minutes then automatically switches to forced disk mode for i dont know how long. and it dosent connect to itunes whatsoever. So i'll say it once more: +*CALLING ALL MAGICIANS AND MIRACLE MAKERS*+

similiar thing happening to me except for the leaving it out in rain, banging it against stuff, LCD juice, clicking and screwing noises, and forced disk mode. so basically mine just goes to sad ipod when i try to turn on then shuts off, but when i have it connected to charger/computer it goes to sad ipod screen to low battery screen, restarts and repeats

Please help! Did something stupid

Please help.
I did something stupid.
I restored a previous backup onto my iphone5, without doing a backup on current first. Previous backup was about 4 months ago, and now I found that I had lost 4 months worth of photos (and videos)
Is there anyway I can retrieve those lost photos? lots of precious memories of kids and family in there. Will do anything to have them back.
P.S: Read that somewhere photos won't be lost, but apparently it wasn't so.

I kind of guessed that ....
Excuse me while I do a silent scream ........ ...... ............ ........
curse the day I read that I can do a restore backup without doing a current backup .......
And all because some notes went missing ....
Thanks for all those who read my last rant ....

I did something stupid and afraid I invited virus or trojan HELP

Ok, I did something really stupid, and after a few hours of beating my head against the wall, I am reaching out here to see if anyone can calm my nerves.
I just purchased a Brother Printer and was having difficulty setting up the wireless connection. I googled "Brother printer customer service phone," and the top of the page it said, Brother Printers with a phone number. I called that number and the tech person said he needed to take control of my computer to see what drivers I needed (he comes Mr. Stupid...that would be me). The tech person directed me to download a program called Team Viewer, and after taking control, he opened the TERMINAL BASH window and pointed out to me the words, "CODE RED." He told me that I have a virus and that's why I could set up my printer wirelessly. He started telling me about a virus program, and it was at this point the my Mr. Stupid thought is this really the Brother Printer company. I hung up and called back the number 866-362-8280 and asked if they were Brother Printer. The person said they weren't that they do tech support for them and that this company is called, Alpha Systems. I looked up Alpha Systems phone number and they said that number is not there's. I called back that number and this time another person said that the name of the company was NBTECHERS. I asked if that person who took control of my computer did anything like plant a virus or create a way to see all my files, he said no (yea sure, the voice of truth?). I called Apple Care and they were terrific in helping out and walked me thorugh what Adware Medic would do automatically (my OS was too old for Adware to install) and removed all the TeamWare and everything else in the specific folders.
FINALLY, HERE IS MY QUESTION TO MY FELLOW MAC's and not as stupid as I am people:
Is there anyway other than the Adware Medic to check if there's anything this awful ripoff company did to my computer?

Unfortunately, after these scammers have had remote access, there is no way of being 100% sure that your computer is clean. AdwareMedic won't help with that, even if you were running a newer system. Neither will anti-virus software. Your system should be considered compromised at this point. You will need to erase the hard drive and reinstall everything from scratch. For instructions, see:
How to reinstall Mac OS X from scratch
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com.)

I did something stupid, and lost all my photos in iPhoto

So, I thought I was in a specific Album with 5 photos in it I wanted to remove from iPhoto. I hit Apple-A to select all and hit delete. It wasn't until a moment later that I realized I must have actually been in my Library, and removed ALL my photos from iPhoto.
Now, all the Albums still appear in the left of iPhoto (6.0, BTW), but when I click on the albums, no photos appear. I went through my hard drives and dragged the appropriate photos back to their original Albums to reimport them into iPhoto. This worked fine with old photos I had organized BEFORE I switched to importing everything in iPhoto.
When I try to import those newer photos, the ones imported through iPhoto over the past couple of years, I keep getting the following error: "The following files could not be imported (they may be an unrecognized file type or the files may not contain valid data)." The files are fine...I'm just trying to import them from their organized roll folder in the iPhoto folder under Photos. Sometimes, I will also get an error that says the file is "already in the iPhoto library."
Is there some kind of preference or something I need to delete so I can reimport these photos from the iPhoto folder into iPhoto again?

EditThis:
If you did not empty the iPhoto Trash via the iPhoto menu the photos will still be in the iPhoto trash container in the Source pane. Click on the trash icon, select all of the photos and drag to the Library icon at the top of the Source pane. They will be returned to their rolls and albums.
The reason you're getting that message is you're trying to import photos that are within the iPhoto Library folder. That can't be done.
Do you Twango?

I sign in tol my Firefox is out of date. did try to do the upgrade but did not work need help

''locking this thread as duplicate, please continue at [https://support.mozilla.org/en-US/questions/978554 /questions/978554]''
I need help to get my sign in working. Need to upgrade?
how to do that?
<sub>edit: removed personal information for your protection. (philipp)</sub>

I sign in told my Firefox is out of date. did try to do the upgrade but did not work. Need help
Let me know how to get my sign in working

When I sign in told my firefox is out of date. I did try to do upgrade but did not work, need help

I need help how to get my sign in working. Do I need to upgrade? If so I need to know how to upgrade.
Thanks for help
<sub>edit: removed personal information for your protection. (philipp)</sub>

Please see https://support.mozilla.org/en-US/kb/websites-say-firefox-outdated-or-incompatible#w_firefox-is-showing-the-wrong-user-agent
If you have Firefox 25.0.1 then your useagent is stuck at the older 3.6.17 version due to the (.NET CLR 3.5.30729) that was added on end at time.
User Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.17) Gecko/20110420 Firefox/'''3.6.17''' (.NET CLR 3.5.30729)

HELP I DID SOMETHING STUPID

I restored my iphone to a previous back up but i didt realise what that meant is there anyway to undo that restore ? i have lost some photos i would like to get back if possible

No.
Restore again from the most recent backup prior to doing the restore.

I did something stupid

First time for me so here goes. I have a PC. I downloaded a [Genius] system to improve the drivers (messing about with something I did not understand ... blame my age, 61). Silence from then onwards. I removed the system and hoped the sound would return but it did not. My Sound Blaster Audigy Advance AB has been brilliant for 5 years. If I go into Control Panel the audio icon is grey not black. If someone recognises my problem and can help me with this, I will be very grateful.

I don't know what operating system you have or had on your PC, but assuming it was some version of Windows, have you tried simply uninstalling and reinstalling your soundcard hardware and software?

I did something stupid (i386)

I was messing around in my command line, when the autocomplete feature showed me the command i386. I wanted to know what it did, so I ran it. I can't believe I did this, but I guess I expected it to display help to explain the command. Instead, it ran without output. Afterwards, I did "man i386" and it brought up the setarch man page. My question is, how do I reverse this change?

No, I ran it as a normal user.
I've read over the man page, it seems to suggest that it did nothing to my system. Is this true?
Edit: I just noticed something interesting, after running i386 in a terminal, running exit displays the output 'logout' instead of exiting. Then, running exit closes the terminal. What is the meaning of this? This seems to reinforce the idea that is made no change.
Last edited by patrickaupperle (2010-04-03 14:26:35)

I think I did something stupid

Problem: System profile won’t acknowledge printer. No printers list under USB in print utility.
Equipment: IMAC OS 10.3.9. Epson Stylus C60 printer.
Stupid thing I did: When printer was giving me problems, I deleted printers from Print Utility list before downloading a driver.
Steps taken: Per the Epson people, I repaired permissions. Threw out Epson folder from library.
Results: No improvement. Is it time to restore my software? I should mention that some of my applications seem to be crashing more than usual and it’s running slow. Can anyone help with this?

Hello grouchyfoglady,
1. Try to download and install the latest printer driver from Epson.
2. Download and install MacJanitor from http://www.versiontracker.com/dyn/moreinfo/macosx/10491
Run the Daily, Weekly, and Monthly utilities.
(In fact, run them regularly).
3. If this doesn't help, download and run Printer Setup Repair from http://www.fixamacsoftware.com/software/psr4/index.php. Has a 7 day free trial period.
Hope this helps.
Bob

I did something dumb plz help

hello,
i was deleting some folders of my drive and accidently deleted my folder with the x on it. im pretty sure it was the os duh. i realized this after i shut it off. so now when i try to start it up it gives me a question mark and a folder flashing. i hope i didnt empty the trash but i cant remember. is there anything i can do to fix it? any help greatly appreciated.

I don't know for sure if this will work. Boot from your OS X Installer Disc One. After the installer loads select your language and click on the Continue button. When the menu bar appears select the Terminal application from the Utilities menu (I'm pretty sure it's a menu choice.) After the Terminal loads you will see a prompt in the Terminal's window. I'm not sure what it will say, so for the sake of this experiment I'll use prompt> to indicate the prompt in the following. Enter the commands and press return to run the command. You need to know the volume name you have assigned to the computer's hard drive, e.g., Macintosh HD.
prompt>cd /Volumes/volname/Users/username
Substitute your computer's drive name for "volname" and your shortname for "username"
prompt>ls -l .Trash
Should list the contents of your Trashcan. If your system folder is in the trash you should see it listed as System. The listing will look something like this:
drwxr-xr-x 4 root wheel 136 Feb 1 23:43 System
If there is nothing listed in the Trash, then you've deleted the System folder and you can stop here, quit the Terminal, and reinstall OS X. If you do see a listing like the one above then continue:
prompt>mv .Trash/System /Volumes/volname
prompt>ls -l /Volumes/volname
Verify that you now have a System folder listed on the volume. If so, quit Terminal and restart.
If you get any system error message doing the above to the effect you don't have sufficient permissions then insert the command "sudo" in front of each command line listed above, e.g., prompt>sudo ls -l .Trash. You will be asked to authenticate with your admin password that will not be echoed.
I'm pretty sure the above should work. However, I've never had occasion to try it.

CD Combo Drive in PB Ti 800 DVI. I did SOMETHING WRONG. Help!

Yep. I just put the Dual Disc DVD/CD ( Massive Attack Collected ), and it wouldnt come out. Stupidly, i just grabbed the edge of the disc , and pulled it out by force.
I think i BEND SOMETHING INSIDE ( no crack sound ), because now my drive wont let anything in. It just blocks everything on the right side of the slot.
I really dont know what to do, can i fix this by myself? Or is the replacement drive a must...?
PS The CD is great ( >_< )
All best
Benedict

Well.
I got it work now. Believe it or not, i just flipped my PB upside down ( on my way to uncover it ), something snapped/clicked. I wondered if it was connected to my problem, so i turned the PB on to see that drive now ***** everything like a vacuum cleaner.
So, im ok now, thanks. Maybe this thread is to be deleted, feel free to do it. Or maybe some of my questions, if answered, might help anyone.
Cheers!
PS I guess i should mark myself as "helped" huh?
PS Oh and if anyone would be so nice id like to know what actually happened?

Did something stupid, stuck in darwin

Hey everyone,
I have a young kid coming over and I set up a guest user account for him. In doing so I decided that I wanted to lock him out of my hard drive, so I logged back into my admin account did "get info" on my hard drive and set it up so that admins have read/write permissions and non-admins don't. I thought this was risky but would be reversable if I just logged back into my admin account, what I didn't realize was that OSX treats the user login screen as a user, and therefore I locked the computer out of the gui user login screen. Now when I turn on my computer it boots into Darwin/BSD and prompts me for a login/pass. I can type in my admin login/pass, but I'm not sure what to do next to fix the issue. I guess I have a few questions, and if I'm totally off let me know:
1) Is there a UNIX command to get me out of Darwin and back into my GUI after loging in as an admin in darwin? (unless the GUI and darwin are not running in any related way)
2) Will this require a system dvd to reverse the settings on my hard drive access priviledges?
and thanks in advance for any advice you may have, it is greately appreciated.

You need to get into single user mode. The startup drive is named: / You need to change the permissions on it. I tried the command on another directory.
This is safe if you limit yourself to these commands.
You need to get into single use mode for the commands that are listed below.
This page will tell you how to get into single user mode.
http://support.apple.com/kb/HT1492
Basically, you hold down the command-s key then powering on your machine. The command key has a little apple symbol on the lower left. It is between the alt/option key and the space bar. On a PC keyboard, it will be the windows key, I think.
( Do you know Unix. You are in a Unix single user console. ) The setup commands you need should be listed on the screen. For Mac OS 10.4.11, the commands are:
# Type the follow two instructions to access the startup disk in read/write:
/sbin/fsck -fy
/sbin/mount -uw /
root # cd /
root # pwd
root # ls -ld
drwxrwxr-t 48 root admin 1734 Dec 31 1969 ./
root # chmod 1775 /
Here is an overview of the terminal commands. Lets assume that your account has a short user name of mac.
Macintosh-HD -> Applications -> Utilities -> Terminal
#How to list all of your disks.
# The ls command is for list
mac $ ls /Volumes/
Audio CD Macintosh-HD Spotless Tiger-ext
mac $
# Let's say your flash drive is named Spotless
# cd is change directory
mac $ cd /Volumes/Spotless
# pwd is print working directory
mac $ pwd
/Volumes/Spotless
mac $
# The ls command is for list
# l is long
# F is type of file where / is directory
mac $ ls -lF
total 134704
-rw-r--r-- 1 mac staff 64560 Mar 3 2009 A-picture-of-Youpi-key.png
drwxr-xr-x 83 mac staff 2822 Nov 7 14:52 Applescript files/
drwxrwxrwx 12 mac staff 408 Dec 13 2008 Christmas Cards/
drwxr-xr-x 9 mac staff 306 Dec 21 17:39 Christmas Cards 2009/
... trimmed ...
What does all this mean?
drwxrwxrwx
d = directory
r = read
w = write
x = executeable program
drwxrwxrwx
| | |
| | all other users not in first two types
| |
| group
|
owner
# l is long
# a is all to show hidden files & folders
mac $ ls -lFa
total 134736
drwxr-xr-x 41 mac staff 1496 Dec 22 17:11 .
drwxrwxrwt 8 root admin 272 Dec 24 13:55 ..
-rwxrwxrwx 1 mac staff 15364 Dec 23 12:52 .DS_Store*
drwx------ 4 mac staff 136 Jan 22 2009 .Spotlight-V100
drwxrwxrwt 5 mac staff 170 Sep 14 16:36 .TemporaryItems
d-wx-wx-wx 4 mac staff 136 Dec 31 1969 .Trashes
-rw-r--r-- 1 mac staff 64560 Mar 3 2009 A-picture-of-Youpi-key.png
drwxr-xr-x 83 mac staff 2822 Nov 7 14:52 Applescript files
drwxrwxrwx 12 mac staff 408 Dec 13 2008 Christmas Cards
drwxr-xr-x 9 mac staff 306 Dec 21 17:39 Christmas Cards 2009
... trimmed ...
# mv is move or rename
mv -i the-name the-new-name
# You can just rename the file back to what it was with mv command.
mv -i old-name new-name
Here is what these commands mean:
cd is change directory
pwd is a print working directory
ls is list
sudo is Super user do
mv is move or rename
For cryptic comments, you can always uses the manual command which is man. For example:
man mv
# Type the letter q to quit.
I noticed that you had spaces in your filenames or directories. You need to escape them. See examples:
mac $ ls -l ~/"see it"
-rw-r--r-- 1 mac staff 3171 Oct 26 23:38 /Users/mac/see it
mac $
mac $ cd /Users/mac/Desktop/ttt\ html\ copy/
Do you know about tabing? Type in a few letters of a name then press the tab key. The computer will type out the rest of the name if it is unique.
Press the up arrow(s) key to see the previous command(s).
history to see many previous commands.
mac $ history
2 man launchd.conf
3 history
Robert
Robert

I did something stupid, can I un-do it?

Okay, so when I first got Tink the Wonder Boxen, I was very happy to have my own computer that I could have root on. My ex is a fairly hardcore kernel hacker, and we'd been running Debian unstable on it, so it's probably a good thing that I didn't have root...anyway!
I figured out how to create accounts and I made three of them-one for school things, one for personal things, and one account for who knows what.
The problem is, I have things on all three accounts that I kind of need in one place, like bookmarks on Safari and Firefox, bits of an accounting project that really needs to be in one folder, etc, etc. It's ugly. It's fugly. It's bad.
Is there any way I can merge accounts? I only want one account, honest to goshness, and I want all my stuff in it. I'd like to be able to listen to all my Mp3's (only one user has the collection), use all my software (only one user has that info), and on and on.
I'm enthusiastic but I will be strait-up honest- I'm not that fantastic with computers yet. I can play just a little in the shell, know ls and grep (kind of), but I'm a lot better at creating problems for myself than fixing them at this point.
Is it even possible to merge accounts? If not, how can I delete the extra accounts and save my data(move it all to one account)?
Thanks a lot!

Bippy,
You're a mess, you are!
Yes, it is possible to "merge" accounts, but maybe not like you are thinking, or as easily. You have two things with which you will need to deal: First, there are individual files; these are easy enough to deal with. Second, there is infomation that will be contained within files; this is the tricky part.
To give you an example of how this can be tricky, let's consider the info for a single application, say Safari (and its bookmarks). Safari will collect all of your bookmarks and keep them in a single file, stored in your HOME folder. In another account, you might have different bookmarks, but all contained within the same file, only within this second account. As I mentioned, it is easy enough to move the "account 2" file into "account 1," but it can be used by Safari only by completely over-writing the existing file. Basically, you would replace your "account 1" bookmarks with your "account 2" bookmarks; not ideal.
The alternative, then, is to import the new bookmarks into Safari. You can export and import bookmarks in Safari from the "File" menu. Export from account 2, transfer the file to the account 1, then import in that one. Go slowly and methodically, exporting and importing the application info you want to "merge."
For plain old files, log into account 2 and do a thorough search for everything you might need in account 1. Once you have located everything, just drag it to a location that can be accessed from account 1 (the "Shared" folder in "Users" is a good place). Now, log into account 1 and move them to the correct place(s) in that account. Hint: It might be better to copy the files into the new account by Option-Dragging them; this will insure that your account 1 user has complete ownership of the files.
If you do ever have problems with ownership once files have been moved, you can use the following command in Terminal to correct any problems:
<pre style="overflow:auto; font-family: 'Monaco'; font-size: 10px">sudo chown -R `id -u`:`id -g` /Users/`id -un`</pre>
I would recommend that you make a text clipping of this command and use it at the appropriate time by dragging it into Terminal.
Let's say that you have a bunch of Word documents in both accounts. Some of the Word documents are duplicated in both accounts, but there are files that are unique in both. These files can be "merged" by selecting all of the files from one account and dragging them to the folder containing all of the files in the second. You would then use the "Replace" dialogue that will pop up and choose not to replace any files, using the "Apply to All" option. This will effectively "merge" the two collections. Different versions of the same file must be dealt with on a file-by-file basis.
Keep at it, very patiently, until you find that one account is no longer necessary. When you find that you are never logging into this account to retrieve stuff (and you are quite sure), go ahead and delete the account.
Scott
p.s. Baltwo's suggestion to "archive" one account is a good one, but only after you have exported any data that must be handled in this fashion. Once the account has been archived, individual files can be moved to the other account by mountng the disk image as he has mentioned. Any files you move will then be copied, and ownership in the new account will be insured. -s

I did something stupid - need help

Similar Messages

Maybe you are looking for