I don't know why people would come here.

This will probably get flagged but this community portal is (in my mind) a waste of my time.I want to look for "self help" not a flame session that is a pain to log in and does not render any suitable results. In other words..a waste of money.

rcschnoor wrote:
rall_g4 wrote:
demmo86rt wrote:
I've noticed the attitude of the poster goes a long way in determining the type of answer they get.
You're right. On the other hand most of the people complaining on here are at a frustration level which can't get much worse. They are at the end of their rope. It would appear that some either can't understand that or refuse to understand that. In fact its probably helpful for them to be able to vent their frustration. Last thing they need is to be insulted, put down, called a liar , ect.
On yet another hand, when someone helps with a possible solution which does not mesh with the thoughts of the person asking the question, they are quite often labeled as a kool aid drinking Verizon employee masquerading as a customer when if fact they most likely are nothing of the sort.
Separate subject

Similar Messages

  • My iPod nano said it couldn't download a song and don't know why

    I was downloading my MC Solar songs to my iPod and it was able to download all but one song and said it wasn't able to download it. I don't see anything different about that song and I don't know why it would download the others but not just this one song. Can anyone offer any help?

    Did it give an error message? If so what did it say?

  • HT1212 I HAVE TRIED TO CONNECT TO ITUNES TO RESET AS I CAN'T REMEMBER MY PASSWORD. I PURCHASED THIS IPAD FROM EB GAMES STORE IT IS RECONDITIONED SO I DON'T KNOW IF THAT WOULD HAVE ANYTHING TO DO WITH WHY I CAN'T CONNECT TO ITUNES

    I HAVE TRIED TO CONNECT TO ITUNES TO RESET AS I CAN'T REMEMBER MY PASSWORD. I PURCHASED THIS IPAD FROM EB GAMES STORE IT IS RECONDITIONED SO I DON'T KNOW IF THAT WOULD HAVE ANYTHING TO DO WITH WHY I CAN'T CONNECT TO ITUNES

    If it is your password on your appleID account then click on the link to reset your password.
    If it is your four digit passcode then See here - http://support.apple.com/kb/HT1212
    You will have to go down the route of a Restore. Please read carefully the links therein with regard to using a different different computer from that with which you normally sync.
    [You may also have to put your device into Recovery Mode -  http://support.apple.com/kb/HT1808 ]

  • Help!(confused face) I'm new with flash and don't know why the timers don't work like i would expect

    I'm new with flash and don't know why the timers don't work like i would expect.  In VB.NET timers are how you move stuff, but it doesn't look like they are ideal for moving stuff in flash at all (really slow).  I'm making a game in which you throw a ball around the screen. i am using a timer to get the ball to move. this doesn't work well for 2 reasons; 1: the ball jumps alot, and 2: the timer should eventually run out of time.  If anyone can help, i'd be thrilled cus this is my first post here, so yeah

    Timing for movement would be more often dealt with using something that operates at the frame rate of the file.  The ENTER_FRAME event is usually selected for this purpose.
    stage.addEventListener(Event.ENTER_FRAME, moveBall);
    function moveBall(evt:Event):void {
         // your positioning code
    You could use a Timer to control when to stop the listener from being active.

  • In my Macbook Pro finder folder under All Images, there are duplicate files, but one is small and the other is full size. I wanted to clean up the files, but don't know why I have two of everything. Any Ideas?

    In my Macbook Pro, the Finder folder has duplicate images in the 'all images' file. One image is small and the other is full size. First question is why do I have two of every image? Why is one small and the other large. Do I need two of everything? If not, which do I delete?
    thanks, Jean

    Hello fane,
    Re: duplicate images in finder.
    Nearly all images are JPG with a few GIF and PNG sprinkled in.
    I opened the inspector so I do get info when opening each image, but it a slow process.
    It seems that one image is around 70k while its twin can be up to 4Mb which is what comes unedited from my camera. Sometimes there will be 3 or 4 identical images in finder, but when I open iPhoto to see what ‘s really in the file, I find only one image, and it’s full sized.
    Are all these extra images, even if they are aliases, taking up space on my drive? And should I delete them? The info bar says I have over 10,000 images, which is rather a lot  for what I do.
    I am unable to add the file size on the view menu as it is grayed out. Don’t know why it’s gray, but having that info on the screen would save a lot of time and fiddling with each image.
    I am trying to resize selected pix so I can upload them to e-bay, which requires less than 70k. I have looked at resizing programs but most are for PC platform and not Mac, so I am trying to resize in the finder window under tools. Tedious at best. Any suggestions will be appreciated
    Thanks for your help,
    jeanfromwilsonville

  • I have a budget of $2,200 and I don't know what to buy; The MacBook Pro 15 inch for $2,199 or the MacBook Pro w/ Retina Display for $2,199. I LOVE playing games but I don't know which one would play games faster.Take note that I wont upgrade anything.

    The MBP w/ Retina Display is 2.3GHz but the other without Retina Display is 2.6GHz. So I don't know which one would play games absolutely flawlessly. I wont have the screen resolution so high on the games though. So can someone reply and tell me which one I should get and why?

    Mac's are generally not 3D gaming computers and laptops especially are not because 3D games require a upgraded video card to take advantage of newer games and more feature rich updates.
    Only the Mac Pro can one change the video card, if one can find a upgrade for it.
    If you really love 3D gaming, a Windows 7 3D gaming tower is your machine.
    http://www.cbscores.com/index.php?sort=ogl&order=desc
    3D gaming on a Mac is sort of a second hobby, it's rather short lived as one can't replace the video card once a year, only with a new machine purchase.
    Most 3D games are for Windows anyway and Apple almost demands OS X be upgraded to newer verisons annually now, so that sort of throws a monkey wrench into a Mac gaming rig with software upgrades and all. On the other hand Windows 7 is supported for a decade.
    Mac's just don't work well with 3D gaming, perhaps a Win 7 tower and a iPad or something.

  • No network after first pacman -Syu, don't know why

    Hi All,
    I've been lurking on the boards since I installed Arch on a old Pentium II machine last summer.  I was pretty impressed how well it ran on crappy old hardware, so I am trying to put it on a much nicer Athlon 1200 box I recently aquired.  But I am having problems with the internet connection after the install.
    The new system doesn't have a ethernet card, so I am using a Linksys usb-to-ethernet adapter.  According to this website:
    http://www.linuxcompatible.org/cdetail10700.html
    this adapter should work with Linux and uses a module called CDCEther.
    After installing off the base CD I burned back in about June and fiddling with rc.conf to get it set up for dhcp, I was able to get on the internet.  So I proceeded to do a pacman -Syu and rebooted once it was finished.  After that boot I can no longer get to the internet at all.  I can't even ping my linksys router which is the gateway.  If I do ifconfig eth0 it says device not found, and if I do netstat -r it returns nothing at all.
    I didn't add kernel26 to my IgnorePkg line in pacman.conf.  Is it possible that the kernel got upgraded and now it can't load the module for my adapter?  When I do a uname -a it says the kernel rev is 2.6.10, while before the pacman -Syu I think it was 2.6.3.  I notice if I do modprobe CDCEther it says there is no such thing.  I didn't try that before it broke though, I didn't have any reason to check it out since everything was working.  But I assume it would have found the module then since I could get on the network just fine. . .
    What is my best option here?  Does anybody know how I can fix this situation, or should I just reinstall?  And if I do reinstall should I use the ftp install instead of going off the CD like I did this time?
    Thanks,
    Ralph

    I have nailed down the problem more and found a workaround for now.  I'll add the info here in case somebody else finds this post when working on a similar problem.
    I tried changing CDCEther to usbnet in both modprobe.conf and rc.conf as that link I posted above suggested.  That didn't help.  After rebooting I still had no network connection even though lsmod showed the usbnet module was running.
    So I left those files with usbnet in them and downgraded the kernel to the 2.6.3 version on my base install CD from last summer.  After doing that and booting the USB to ethernet adapter is fine and I can get to the internet.  So clearly it was the pacman -Syu upgrading the kernel that broke it, I just don't know why.
    For now I have put kernel26 in my IgnorePkg line of pacman.conf so this won't happen again.  I would guess if I figure out why it broke I could upgrade the kernel by recompiling or using ABS as people suggested above.  But I'll wait till I have a little more experience and know more about why the newer kernel didn't work before I try that.
    Thanks again to iBertus and sarah31 for the help.

  • Itunes asking me my billing verification again and again on the same computer. I don't know why it behave like this. Anyone can solve my problem?

    Itunes asking me my billing verification again and again on the same computer. I don't know why it behave like this. Anyone can solve my problem?
    I already provided my 3 digit CVV number but Itunes again need to confirm the code whereas on my Office Computer I am purchasing Apps on Itunes without verifying my billing information again and again except once at the time of creation of account.
    Please help me as I am charging by my Credit Card bank by US$ 1 each time when I give verification code.
    Thanks
    Talat Khatri

    Try the following steps,
    Sign into your computer and removal of credit card information. Here are the steps:
    1) Open iTunes and sign in to the iTunes Store.
    2) Select "View My Account" from the Store menu.
    3) Enter your password and click the View Account button.
    4) Click the Edit Payment Information button.
    5) Select "None" as the payment type.
    6) Click the Done button at the bottom of the page.
    Reset your account password from the following link:
    http://iforgot.apple.com
    Phase 3:
    Download a free content on to get recognized in iTunes.
    To ensure your account is functioning, try downloading a free item from the iTunes Store. To do this, navigate to the iTunes Store main page by clicking the Home icon near the upper-left corner of the window. Scroll down and click the "FREE ON iTunes" link near the bottom of the main page, then select an item to download.
    After you are able to download the free App try updating the billing information as usual.

  • Money taken from my account I don't know why

    Hi,
    I am student and I bought the photoshop license about a week ago and One day after I bought it I realised you had a better offer so a switched to that offer, I asked spoke with one of your colleagues, Lyna, who told me that I wouldn't be charge for the cancelation of the first purchase because it was only one day after. Yesterday I checked my account and you have taken 46 pound from my account and I don't know why, so I'd like those 46 pound back please.
    Romina Baldom

    This is an open forum with a mix of other users and Adobe staff, not Adobe support... you need Adobe support
    Adobe contact information - http://helpx.adobe.com/contact.html may help
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • Windows 8.1 Keeps crashing! Blue screens and I don't know why.

    My computer is crashing randomly. Happens once every few days or so. It started happening when I installed a new fan and heatsink. My cpu never goes over 50 C now so I don't know why it is crashing. Here is the dump file. Please help me :/
    Microsoft (R) Windows Debugger Version 6.3.9600.17298 AMD64
    Copyright (c) Microsoft Corporation. All rights reserved.
    Loading Dump File [C:\Windows\MEMORY.DMP]
    Kernel Bitmap Dump File: Only kernel address space is available
    ************* Symbol Path validation summary **************
    Response                         Time (ms)     Location
    Deferred                                       SRV*C:\Windows\symbol_cache*http://msdl.microsoft.com/download/symbols
    Symbol search path is: SRV*C:\Windows\symbol_cache*http://msdl.microsoft.com/download/symbols
    Executable search path is:
    Windows 8 Kernel Version 9600 MP (6 procs) Free x64
    Product: WinNt, suite: TerminalServer SingleUserTS
    Built by: 9600.17328.amd64fre.winblue_r3.140827-1500
    Machine Name:
    Kernel base = 0xfffff803`7a47e000 PsLoadedModuleList = 0xfffff803`7a754370
    Debug session time: Tue Nov 25 22:05:18.738 2014 (UTC - 5:00)
    System Uptime: 2 days 9:06:56.454
    Loading Kernel Symbols
    Loading User Symbols
    PEB is paged out (Peb.Ldr = 00000000`7ffdf018).  Type ".hh dbgerr001" for details
    Loading unloaded module list
    *                        Bugcheck Analysis                                   
    Use !analyze -v to get detailed debugging information.
    BugCheck 3B, {c0000005, fffff8037a52cba4, ffffd000220ab340, 0}
    Probably caused by : win32k.sys ( win32k!SEMOBJ::vUnlock+2c )
    Followup: MachineOwner
    4: kd> !analyze -v
    *                        Bugcheck Analysis                                   
    SYSTEM_SERVICE_EXCEPTION (3b)
    An exception happened while executing a system service routine.
    Arguments:
    Arg1: 00000000c0000005, Exception code that caused the bugcheck
    Arg2: fffff8037a52cba4, Address of the instruction which caused the bugcheck
    Arg3: ffffd000220ab340, Address of the context record for the exception that caused the bugcheck
    Arg4: 0000000000000000, zero.
    Debugging Details:
    EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
    FAULTING_IP:
    nt!KxWaitForLockOwnerShipWithIrql+14
    fffff803`7a52cba4 48890a          mov     qword ptr [rdx],rcx
    CONTEXT:  ffffd000220ab340 -- (.cxr 0xffffd000220ab340;r)
    rax=0000000000000000 rbx=0000000000000000 rcx=ffffd000220abdf0
    rdx=8848800000000000 rsi=0000000000000000 rdi=ffffd000220abdf0
    rip=fffff8037a52cba4 rsp=ffffd000220abd70 rbp=ffffd000220abea0
     r8=ffffd000220abef0  r9=ffffe000da69ddb0 r10=ffffd000220abf80
    r11=fffff90145b03ce0 r12=fffff90140ad53f8 r13=fffff90140a00830
    r14=0000000000000000 r15=ffffe000d889d880
    iopl=0         nv up di pl zr na po nc
    cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010046
    nt!KxWaitForLockOwnerShipWithIrql+0x14:
    fffff803`7a52cba4 48890a          mov     qword ptr [rdx],rcx ds:002b:88488000`00000000=????????????????
    Last set context:
    rax=0000000000000000 rbx=0000000000000000 rcx=ffffd000220abdf0
    rdx=8848800000000000 rsi=0000000000000000 rdi=ffffd000220abdf0
    rip=fffff8037a52cba4 rsp=ffffd000220abd70 rbp=ffffd000220abea0
     r8=ffffd000220abef0  r9=ffffe000da69ddb0 r10=ffffd000220abf80
    r11=fffff90145b03ce0 r12=fffff90140ad53f8 r13=fffff90140a00830
    r14=0000000000000000 r15=ffffe000d889d880
    iopl=0         nv up di pl zr na po nc
    cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010046
    nt!KxWaitForLockOwnerShipWithIrql+0x14:
    fffff803`7a52cba4 48890a          mov     qword ptr [rdx],rcx ds:002b:88488000`00000000=????????????????
    Resetting default scope
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    BUGCHECK_STR:  0x3B
    PROCESS_NAME:  AI Suite II.ex
    CURRENT_IRQL:  0
    ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) amd64fre
    LAST_CONTROL_TRANSFER:  from fffff8037a4d9f8c to fffff8037a52cba4
    STACK_TEXT:  
    ffffd000`220abd70 fffff803`7a4d9f8c : ffffe000`da69ddb0 00000000`0000001e 00000000`00000000 ffffe000`db793c30 : nt!KxWaitForLockOwnerShipWithIrql+0x14
    ffffd000`220abda0 fffff803`7a4d93c2 : 00000000`00000000 fffff960`002172ec ffffd000`220ac002 fffff901`44ffe620 : nt!ExpReleaseResourceForThreadLite+0x64c
    ffffd000`220abee0 fffff960`001da2cc : 00000000`00000000 fffff960`001a7ef2 0000207f`e204207f 00000000`00000001 : nt!ExReleaseResourceAndLeaveCriticalRegion+0x12
    ffffd000`220abf10 fffff960`001d51a3 : fffff901`451e4ac0 ffffd000`220abfa0 00000000`00000000 fffff901`40ad53f8 : win32k!SEMOBJ::vUnlock+0x2c
    ffffd000`220abf50 fffff960`001e49ad : 00000000`0000163c fffff901`44ffe620 00000000`00000000 ffffe000`da69ddb0 : win32k!GreSelectVisRgnInternal+0x173
    ffffd000`220abfd0 fffff960`001ac21b : ffffffff`e204207f fffff901`00000d3a 00000000`00000001 ffffe000`da69ddb0 : win32k!ResetOrg+0x50d
    ffffd000`220ac100 fffff960`001e5a5d : ffffffff`e204207f fffff901`452e23e0 ffffd000`220acb00 ffff6b78`f79a9a37 : win32k!UserSetDCVisRgn+0x17b
    ffffd000`220ac140 fffff960`001ed3a4 : fffff901`40a58990 00000000`00000000 fffff901`40a58990 00000000`02000705 : win32k!zzzLockDisplayAreaAndInvalidateDCCache+0x14d
    ffffd000`220ac1a0 fffff960`003149cf : ffffe000`db7b2ba0 fffff901`428f7a80 00000000`00000000 fffff901`40b00ff0 : win32k!xxxCreateWindowEx+0x1824
    ffffd000`220ac4b0 fffff960`001ed82a : fffff901`428f7d28 00000000`00000000 00000000`00000000 ffffe000`db7b2ba0 : win32k!xxxCreateDefaultImeWindow+0x19b
    ffffd000`220ac5b0 fffff960`001d6ab5 : 00000000`00000000 00000000`00000000 e000d889`78747355 fffff803`7a4d7bc8 : win32k!xxxCreateWindowEx+0x1caa
    ffffd000`220ac8c0 fffff803`7a5d89b3 : 00000000`00000000 ffffd000`220ac940 ffffd000`220ac958 ffffd000`220ac968 : win32k!NtUserCreateWindowEx+0x4d2
    ffffd000`220aca10 00000000`777f611a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
    00000000`0abbe758 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x777f611a
    FOLLOWUP_IP:
    win32k!SEMOBJ::vUnlock+2c
    fffff960`001da2cc ff158e023100    call    qword ptr [win32k!_imp_PsLeavePriorityRegion (fffff960`004ea560)]
    SYMBOL_STACK_INDEX:  3
    SYMBOL_NAME:  win32k!SEMOBJ::vUnlock+2c
    FOLLOWUP_NAME:  MachineOwner
    MODULE_NAME: win32k
    IMAGE_NAME:  win32k.sys
    DEBUG_FLR_IMAGE_TIMESTAMP:  54335e2a
    IMAGE_VERSION:  6.3.9600.17393
    STACK_COMMAND:  .cxr 0xffffd000220ab340 ; kb
    BUCKET_ID_FUNC_OFFSET:  2c
    FAILURE_BUCKET_ID:  0x3B_win32k!SEMOBJ::vUnlock
    BUCKET_ID:  0x3B_win32k!SEMOBJ::vUnlock
    ANALYSIS_SOURCE:  KM
    FAILURE_ID_HASH_STRING:  km:0x3b_win32k!semobj::vunlock
    FAILURE_ID_HASH:  {ec837e9a-fa14-dd77-d99c-f14b9fe89bf2}
    Followup: MachineOwner

    Hi,
    In order to assist you, we will need the .DMP files to analyze what exactly occurred at the time of the crash, etc.
    If you don't know where .DMP files are located, here's how to get to them:
    1. Navigate to the %systemroot%\Minidump folder.
    -- %systemroot% is the environment variable for your Windows directory. For example, C:\Windows.
    2. Copy any and all .DMP files in the Minidump folder to your Desktop, create a new folder on the Desktop to put these .DMP files in, and then zip the folder. You can then either use a 3rd party tool such as 7-Zip/Winrar, or you can use Windows'
    default method of zipping folders.
    Compress and uncompress files (zip files).
    Please note that any "cleaner" programs such as TuneUpUtilities, CCleaner, etc, by default will delete .DMP files upon use. With this said, if you've run such software, and your Minidump folder is empty, you will need
    to allow the system to crash once again to generate a crash dump.
    3. Upload the .ZIP containing the .DMP files to Onedrive or a hosting site of your choice and paste in your reply.
    Preferred sites: Onedrive, Mediafire, Dropbox, etc. Nothing with wait-timers, download managers, etc.
    4 (optional): The type of .DMP files located in the Minidump folder are known as Small Memory Dumps. In %systemroot% there will be what is known as a Kernel Memory Dump (if your system is set to generate). It is labeled MEMORY.DMP. The difference
    between Small Memory Dumps and Kernel Memory Dumps in the simplest definition is a Kernel Memory Dump contains
    much more information at the time of the crash, therefore allowing further debugging of your issue. If your upload speed permits it, and you aren't going against any strict bandwidth and/or usage caps, etc, the Kernel Memory Dump is
    the best choice. Do note that Kernel Memory Dumps are much larger
    in size due to containing much more info, which is why I mentioned upload speed, etc.
    If you are going to use Onedrive but don't know how to upload to it, please visit the following:
    Upload photos and files to Onedrive.
    After doing that, to learn how to share the link to the file if you are unaware, please visit the following link -
    Share files and folders and change permissions and view 'Get a link'.
    If your computer is not generating .DMP files, please do the following:
    1. Start > type %systemroot% which should show the Windows folder, click on it. Once inside that folder, ensure there is a Minidump folder created. If not, CTRL-SHIFT-N to make a New Folder and name it Minidump.
    2. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Performance > Settings > Advanced > Ensure there's a check-mark for 'Automatically manage paging file size for
    all drives'.
    3. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Startup and Recovery > Settings > System Failure > ensure there is a check mark next to 'Write an event to the
    system log'.
    Ensure Small Memory Dump is selected and ensure the path is %systemroot%\Minidump.
    4. Double check that the WERS is ENABLED:
    Start > Search > type services.msc > Under the name tab, find Windows Error Reporting Service > If the status of the service is not Started then right click it and select Start. Also ensure that under Startup Type it is set to Automatic rather than
    Manual. You can do this by right clicking it, selecting properties, and under General selecting startup type to 'Automatic', and then click Apply.
    If you cannot get into normal mode to do any of this, please do this via Safe Mode.
    Regards,
    Patrick
    “Be kind whenever possible. It is always possible.” - Dalai Lama

  • My daughter has downloaded free games from the App Store and I have been charged in excess of £200 and I don't know why has anyone had the same issue and if so how did you get your money back

    My daughter has downloaded free games from the App Store and I have been charged in excess of £200 and I don't know why has anyone had the same issue and if so how did you get your money back

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact
    To help avoid future transgressions set the Restrictions for In-App Purchases...
    Settings > General > Restrictions
    Understanding Restrictions  >  http://support.apple.com/kb/HT4213

  • TS3297 I want to buy the double coins from the game subway surfers! But they told me to contact the itunes support! I don't know why it's not working.. Please help! iPhone 4ss

    I want to buy the double coins from the game subway surfers! But they told me to contact the itunes support! I don't know why it's not working.. Please help! iPhone 4ss

    These are user-to-user forums, you are not talking to Apple here. You can contact iTunes support via this page and ask them why the message is appearing : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then probably Purchases, Billing & Redemption

  • Hi, Im new to Apple MacBook PRO. I have saved about 50GB files plus applications and message advises that my start up disk is almost full! My MacBook pro has a 500GB hard drive so don't know why this message is coming up. Please help.

    Hi, Im new to Apple MacBook PRO. I have saved about 50GB files plus applications and message advises that my start up disk is almost full! My MacBook pro has a 500GB hard drive so don't know why this message is coming up. Please help.

    MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro 
    https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion?view=discussi ons

  • I keep getting "Unable to connect" for my firefox. It was working yesterday and I turned my computer off. I can get to the web using internet explorer 9. I don't know why my firefox is not working. Everything else is working. HELP....

    I keep getting "Unable to connect" for my firefox. It was working yesterday and I turned my computer off. I can get to the web using internet explorer 9. I don't know why my firefox is not working. Everything else is working.

    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.com/kb/Server+not+found
    *https://support.mozilla.com/kb/Firewalls

  • HT204384 my sd slot card of my mac don't work . i don't know why! can you help me

    my sd slot card of my mac don't work . i don't know why! can you help me

    If it doesn't work with any sd card you insert into it then you can try a smc reset and a pram reset but if that doesn't work then the slot has failed. the only way to get that fixed is to replace the main circuit board, the logic board, which is very expensive. That is unless your mac still has a warranty on it then it would be free.
    If you have no more warranty then just buy a sd card reader that connects to the computer by usb port.

Maybe you are looking for