I don`t want XMarks on my computer. I started registering but didn`t finish and now it won`t STOP asking me to finish registering. How do I get out of that loop please?
I started registering with Xmarks because I thought I wanted it. I got into an impossible loop with remembered and forgoteen passwords and/or user names and now I JUST WANT OUT! Please tell me how to get out of this loop! Thank you!
I just discovered a solution! Go to the upper right hand corner in Firefox where the search bar is. Click on the icon and you'll get a drop-down menu. Go to "manage search engines". You can then delete all the no-good ones, like Bing and Yahoo.
Similar Messages
-
My ipad 2 was being updated to ios 6.1.3 and when it rebooted it went to recovery mode. I want my ipad 2 back with or without my files.Please help
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
I have a new Macbook Air, 6 months old, and for the last few days the fan had run continuously, this is the first time it has ever run, and now it won't stop, the fan starts up as soon as I turn it on and the computer seems to running more slowy.The computer is not hot but I am worried it may burn out,.Any ideas on how I can fix this please ?
Hello dwb,
Here is the screen shot, just the top half, there are another 10 pages, but I guess this should enough for you to have an idea of waht is going on, bit small I am afraid. No, I don't have any apps setup to run when I open my computer, the kernel, varies between 290 and 305 per cent ish.
Would that PRAM thing help ? I think it may be the computer itself, well something inside, as this the first time that the fan has ever started running since I have this computer, even when I have 3 or 4 apps running.
Thank you again for your advice,
Regard,
Beauty of Bath -
When i tried to download iOS8 on my iPad Mini it told me that I needed to connect my iPad to iTunes, I have done that and now it says I need to restore my iPad. How can I get my iPad working without losing everything on my iPad? I don't want to lose my apps and photos!
Help would be much appreciated!If you are getting the connect to iTunes screen then it's too late to take a new backup and/or copy anything off it. Prior to starting the update did you take a backup, either to the cloud and/or to your computer's iTunes ? If not then have you recently taken a backup that might have your photos and apps content/settings in it ?
As long as the apps are still in your country's store then you should be able to redownload them via the Purchased tab in the App Store app (and the Purchased link under Quick Links on the right-hand side of the iTunes store homepage on your computer's iTunes), and if the apps store their content on a server/cloud service then you might be able to get their content back from that - if they store their content on the device then you will need to have a backup.
For our photos you could try doing a search for programs that claim to be able to recover content from a device - I haven't used any so I can't suggest one. -
Due to a virus on my computer I have had to have it re built and now all my music I have bought is gone. How can I get it back again please.
If for some reason you have failed to do the basics and backup your computer, then you will need to redownload ( if this is available in your country):
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Or you could transfer from an ipod: File>Transfer Purchases -
flash player has been installed multiple time without errors but bbc news website and even flash player help say it isn't. How do i get out of this loop? - using windows 7 ultimate and latest IE11
I have had the same problem for WEEKS and I cannot access any sites that use Flash. Flash has been installed on this computer since I bought it in 2012. I have allowed auto updates but for weeks the updates never get past Step 2 - is this because I do NOT want the Google Tool bar? I use NO tool bars as there is only 6 inches of vertical screen space. Is this because I uncheck wanting Chrome as a default browser? It is already installed, I just don't use it. I came to this site and ran the check is it installed and the system says it is either not installed or not enabled. Version 14 just downloaded about 30 minutes ago - but did not progress to Step 3 although a pop up screen came up with a finish button, which I clicked. WHAT is the problem and how do I fix it? If this were just a compatibility bug between IE11 and Adobe they have had plenty of time to fix it.
Stephanie HC -
Sleep, Restart, Shutdown loop - how do I get out of this loop?
I installed os X Panther on mom's older iMac.
Tonight, when it's booted it comes up with "sleep, restart, shutdown" options.
We've selected each of these 3 items, waited, then either woke it up, waited for it to restart, or restarted it from shutdown; however, again it will eventually show a screen that only allows her to select "sleep, restart, shutdown"
How does she get out of this loop?
Note: There is not option to cancel the screen that has "sleep, restart, shutdown."* http://kb.mozillazine.org/Software_Update (Software Update not working properly)
It shouldn't be necessary to reboot the computer to complete an update.<br />
Download a fresh copy of Firefox ([http://www.mozilla.com/firefox/all.html]) and do a reinstall of Firefox on top of the current version.<br />
You may need to do a clean install:
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox. -
I used my iPad find my phone to find my iPhone yesterday, which I did. Now I need to find my phone again but when I log in it is still showing yestrdays input, how do I get out of that one to find phone again
Why don't you sign into www.icloud.com on your computer and locate both iPad and iPhone.
-
I recently brought a HD PVR, i put in the disk to install the hard drive and it said " This program doesn't support DOS Mode! how do i get out of DOS Mode?? Please Help
What exactly are you trying to do? PVRs are for recording from TV not computers.
Either way, if it's complaining about DOS mode, it's Windows oriented software and not Mac compatible. -
Contacts error message--how do I get out of the loop?
Since the latest ML upgrade (10.8.2 12C60) was pushed to my MBPro (15-inch, Mid 2010, 2.53 GHz i5) this morning, I have been getting the error message "Contacts can't connect to the account <mail account name> Enter the password for user <username>". The message hangs from the top edge of the Contacts window. I have tried the password for the ISP mail account, the iCloud mail account, my computer user account, my keychain, my computer system administrator account, etc. I have tried pasting passwords copied from my keychain. The message keeps reappearing. The only way to get rid of the message is to quit Contacts. After about 20 password attempts, I get the message "The operation could not be completed. No other information is available about the problem." When I dismiss this message, I get the 1st message again. It is an unending loop. "Cancel" does not get out of the loop. Help!
Mail seems to work all right.I also keep getting the error message "The operation could not be completed No other information is available about the problem" but only with Contacts (the address book). Mail is fine. I can not tell what operation it is referring to and have not found any problems with the contacts themselves yet. Its a concern, and annoying, but I can't say that its an actual problem for me. A glitch maybe?
I did have the problem you are having with mail some time ago, but after I deleted the accounts off of my mac and iphone, then set them back up from scratch it resolved the issue. I seriously hope I don't have to do that with contacts. It would make me very nervous. -
How do I get out of endless loop from entering improper log in information
On a Dell laptop using Windows 7. I logged in using a the info that came up automatically. The system now shows a blue screen with dots going around in a circle for hours. How can I get it to stop and log in with the correct ID?
What Firewall and Antivirus applications are installed on your computer?
-
We reset back to factory settings. After a few attempts we found an email we could use to set up as Apple ID. Everything was working great. Now it has pulled up one of the email addresses we tried to use, and is trying to verify, and asking to continue to complete the set up. It gets to a certain page, and stays there, won't let us get out of the page. We shut down the iPad, but it came back to the same thing, when it restarted. What do we do to stop this?
You will need another iOS device or a computer in order to do this, but I assume that's not a problem since you are on this forum.
see if you can change the ID using the instructions here.
Apple ID: Changing your Apple ID
Did you try starting all over again to see if you can start from scratch now? -
I brought an iPod off eBay, second hand a few weeks ago. The first week I had it everything was working fine. Then suddenly when I plugged it in to charge the battery logo didn't appear, so I left it overnight and it still charged but there was still no logo. And now when I plug it in to connect to my iTunes on my computer, it isn't showing up on the left hand side where it should. I have tried restoring the iPod twice and using different cables and no change was made, what should I do?
See:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X -
Hi,
I had to restore my computer to factory setting. When I was finished and reinstalled itunes. None of my music showed up. Where is it and why didn't it show up when I reinstalled itunes? I even plugged in my apple shuffle and it didn't appear.This user tip should be helpful. It refers to the iPhone, but it's equally valid for iPods as well…
Syncing to a "New" Computer or replacing a "crashed" Hard Drive -
I have two hard drives for my iMac, I cannot right click on either icon to 'safely disconnect' either drive, but I can send one to trash. The other however will not go to trash so how do I disconnect this one please?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Maybe you are looking for
-
Hi, I am trying to help some friends who have recently bought a new HP desktop and HP printer. We have set up both and can print from programs installed, thats no problem. When we try to print a page from IE8 nothing at all happens. We have the HP Sm
-
Program to load a flat file in a Hierarchy
Hello Experts, I have this huge hierarchy which we are trying to load through a flat file. It is about 10 levels and it is huge and all the readings and guide here are just not helping. It will probably take forever creating this file with the Node I
-
Hi I am importing to Pictures/2010/date of shot If viewed in explorer everything is fine. It created the correct subfolders and moved the pictures into it. However, in the folder structure in the Library panel the new folders are located at the root
-
Click-Ads and MacKeeper invading all my browsing! I'm losing my mind
Hi, I have a MacBook Air purchased last year and all has been fine but recently all my browsers have been under attack from ads. They open as new tabs when i click on anything on a page i'm browsing and the main culprit is something called MacKeeper.
-
How to pass in GR qty in user exit (EXIT_SAPLEINR_003)
Hi, How to pass in GR qty MIGO transaction (ERFMG field) into user exit EXIT_SAPLEINR_003? thanks.. Lina