I dropped my iphone 4, and it wont turn on unless connected to a power source. even then its stuck on the apple logo.but once i take it off the power source it shuts off and wont turn on.
I dropped my iphone 4 and it shut off and when i tried to cut it on it wouldnt. so i connected it to a power source and it tunred on but stay stucked on the apple logo. so when i discounted it shut off. it only turns on when connected to a power source but not on its own. i tired to connect it to itunes no help, i tried to press the home and power button still no help.
Your last try would be a restore if you can get iTunes to recognize the phone. If not, you have probably damaged the device beyond repair. You can go to see Apple about an out of warranty replacement. The cost for the iPhone 4 is $149US, you can check for your location.
Similar Messages
-
I downloaded the latest iOS7 to my iPad and then the screen went blank and would not respond. I have tried pressing the two buttons together and briefly get the Apple logo but still can not restart, the logo disappears. I have tried connecting to my iMac to restore the iPad but the device does not show up (I have an old iMac). What else can I do?
You need to be running Snow Leopard 10.6.8 at the very least in order to sync your iPad with iTunes so you could update your Mac, if it can be updated, and if you care to do so.
If that's not an option, you will have to find someone that can restore the device for you with their computer running iTunes or make an appointment at an Apple Store and ask them to restore the device for you.
I hope that you have an iCloud backup, because you will lose everything on the device when it is restored.
Snow Leopard can still be purchased in the U.S. Apple Online Store.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Also, I would not give up on the reset technique....holding down on the sleep and home buttons at the same time until the Apple logo appears. It takes about 10-15 seconds and sometimes just a little longer to get the logo to appear. -
I plugged my iPod into my computer to retore it and proceeded to do so as told. The only thing that happened after that was that the Apple logo keeps showing up and nothing else. My computer/iTunes no longer recognizes my iPod either.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
before it was stuck on the apple logo so i restarted it like 5 times in less than a minute and now it just WONT do anything.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have an Iphone 3g and i can't turn on, but if i plug it on the Iphone charger i can see the Apple Logo but it quickly disappears(Apple Logo SOD) When I connect it to the computer it won't charge and it won't turn on, I tried DFU mode and it doesn't work. I tried STABBING IT(lol, it works sometimes) and i doesn't work again. If i can't connect it to the computer i can recover it but i know that it still works. WHAT SHOULD I DO!!!!!
http://reviews.cnet.com/8301-19512_7-10115048-233.html
http://support.apple.com/kb/TA38633
Apple suggest a removal and re-install of iTunes to get over the 1601 / 1602 error message.
Other sites suggest trying a different USB socket… direct to the PC / Mac not a hub.
edit to add usb info. -
My iphone 4s crashed today and will not go back on. I see the apple logo, but nothing else will happen.
Hello jaicob1990,
Try the steps in the article below; it will give you multiple options on how to resolve the issue.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
My ipad2 has suddenly decided not to connect to the internet either through Safari or email. My WiFi signal is strong and all other devices in my house are connecting ok. I have tried pressing the home and off buttons together to get the Apple Logo but this has not changed anything, still cannot connect. "Safari cannot open the page because your ipad is not connected to the internet"
I have done this and no difference
I have just realised what has caused the problem.
Yesterday I fitted an additional Homeplug with built in wireless N adapter ( I alreday have another type fitted from my main router position) The wireless system to my ipad is obviously "confused" . Having now removed the second homeplug and reset my ipad all is now ok -
I had my iphone 3GS and then upgraded to 6.1.3. Now the phone is in a loop and reboots everytime the Apple logo comes up. I held teh home power and connected to itunes to retore, but it won't restore. any ideas?
Hey harikrishnandhk,
Thanks for the question. I understand you are having issue with your iPhone 3GS. You are definitely taking the correct steps, as you'll want to restore the iPhone in recovery mode. For information on doing so, see this article:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Thanks,
Matt M. -
During the boot up process, the white bar under the apple logo is always so close to reaching the end but it restarts and tells me to restore it again. I have tried different usb ports and restarting computer but it wont work
Ipod classic 120gbHave you tried restoring through iTunes? If not, try pressing and holding the center 'Select' button and the top 'Menu' buttons together until it restarts. Once you it restarts and you see the Apple logo, press and hold the left 'Previous' and center 'Select' buttons together to go into the diagnostics. You can run tests through that and see if it's a hard drive issue or software issue.
-
Help! Mac won't start. I hear the ding and see the apple logo but the bar below it never goes further than an inch before the screen goes dark. I have tried unplugging.
Hello Templemeads,
Thank you for using Apple Support Communities.
For more information, take a look at:
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/ts1367
Have a nice day,
Mario -
my iPad 3 showing the apple logo, but won't reboot, tried few time hold sleep/home button but still wont work, what can i do
Read
http://support.apple.com/kb/ht1808 -
My daughter's ipod touch just stopped working. will not turn on other than showing the apple logo for 30 sec and then off. this happens whether it's attached to the computer or not.
Try resting it from the computer
-
My iphone 4s keeps flashing the apple logo but wont turn on...
I've tried pressing the home button and hold key to restart it, ive tried to plug it in to my mac and restart it but it wont even recognise that its connected...
Just the apple logo flashes and sometimes fades out with a green or blue line through it... What is going on somebody please help me
This is seriously the 4th iphone i've received this year my first one lasted me 2 years!!Do a recovery mode
http://support.apple.com/kb/HT1808 -
hi i am having difficulty with my iphone 4s it has been on charge for a number of hours but is just flashing the apple logo continuously i have tried to reset but nothing seems to work can anyone help me please
What is a hard reset? There is nothing in any of Apple's documentation that refers to a hard reset.
There's a reset, a restart, and a restore.
Please explain EXACTLY what you did. -
I just bought a gently used 16 GB iPhone 5. I set the phone up earlier today with no issues at all, installing backup data from my iPhone 4, syncing the new phone to my iCould, setting up my new SIM card, etc.
The phone was working fine (I was able to send and receive texts, use WiFi, manage apps, etc.) for the first hour or so. Then, without warning, it shut down. The screen is solid black, but every now and then it flashes white with the black apple logo.
I tried multiple hard reboots — all failed.
iTunes (on my MacBook Air, running Yosemite) is now unable to recognize the device, although it recognized it without issue earlier today.
I live overseas, so going to an Apple store is a bit inconvenient. If I can trouble shoot this at home (and in English), it would be really helpful.
Thank you in advance if you have any helpful tips or suggestions!
Best,
MilliGFunkGregseymour-
DO NOT STICK A PAPER CLIP IN THE HOLE!
There are two holes. One is a small one that has a microphone behind it. A paper clip would probably ruin the microphone. The other is a 1/8 inch hole where you plug in a headset. A paper clip might short-circuit something.
First connect the iPad to its wall charger for at least half an hour to be sure it has enough juice to get started.
Then if the iPad does not wake up when either the Home or Sleep button is pressed, press and hold the Sleep button for several seconds and see if the Apple logo appears. If it does, then your iPad has been turned off instead of merely being put to sleep.
Beyond that, look for an iPad repair center. The Apple Authorized Repair Centers may be more expensive. If you want to try them, look at <Apple Authorized Repair Centers>. There may be one in your city.
Fred
Maybe you are looking for
-
Receive acknowledgement in file-to-idoc scenario
Hello! I'm using guide "How to handle acknowledgement for IDOC", and for the first time I want to see an acknowledgement status in sxmb_moni. I have passed all steps: In CRM I have logical system P1DFILE, this is the system that sends an idoc to CRM.
-
Syntax for Database query on a simple java appl?
Connection con; private boolean conFree = true; private String dbName = "java:comp/env/jdbc/gene"; public geneDB () throws Exception { try{ Context ic = new InitialContext(); DataSource ds = (DataSource) ic.lookup(dbName); con = ds.getConne
-
Best application design for LOV's with historical values
Hi, I'm trying to find a way to solve a standard LOV problem the best way in Apex. All over my application I am using LOV's which I like to define on a UI defaults level so I can inherit these definitions on all pages I create on these tables. If I d
-
Discoverer authentication against Kerberos
We are using Discoverer 4i and webserver 9iAS. When a user login into discoverer it authenticate user against database username and password. We need to change this logic and make it authenticate user against our main Kerberos authentication server r
-
ITunes / iPod having problems with lyrics in MP3 files and not with M4A ?
Over the last two month (without this forum) I believed sometimes to be the only one having a weird problems with iTunes lyric format structure. Now after more than 50h of investigations interesting results appear. The field of trouble: a) People are