I dropped my IPhone 6 plus in water and now the power button does not want to work

So i had the Iphone 6 Plus in my hand when it feel into a big puddle and it was in there for more than a minute so i come home and i find out that the power button (on the right hand side button) doesn't want to work like its on and im on the home page and then i press the button and nope nothing and the volume button somewhat works and sometimes the power button works so i turn it off and i put it in the rice next thing you know the phone turns on again without me touching it or anything. So I need help and the phone is new not even a month i have had it and i don't want to spend money on it. Please help! This phone is my life and i will do anything(that does not wast money) to save my phone.

You can try leaving it in that bag of rice for 5-7 days to see if it will dry, however if it will not stay turned off, I would say that something is shorted out. You will need to make an appointment at the Genius Bar of the nearest Apple Store or Authorized Apple Service provider and be ready to pay for an out of warranty replacement. If you purchased Apple Care Plus there is only a deductible, but without it, you will have to pay the price of an out of warranty phone. User damage is not covered under warranty.

Similar Messages

I dropped my iPhone 4 in water and now it won't turn on at all, will i lose all of my data, for example my photos and messages etc? and is there any way you can back the phone up without having it switched on?

I dropped my iPhone 4 in water and now it won't turn on at all, will i lose all of my data, for example my photos and messages etc? and is there any way you can back the phone up without having it switched on?

If you had previously been backing up to iCloud (or a computer with iTunes), you would possibly have a backup. That said, if you can't turn the phone on, you cannot create a backup of the device now. Sorry.

My daughter down loaded the new 6.0 software and now her home button does not work. Tried reloading software and reset to original factory settings.

My daughter down loaded the new 6.0 software and now her home button does not work. Tried reseting to original settings and reset the operating software. Any ideas?

Try:
fix for Home button
Fix a broken, unresponsive or sticky iPhone Home Button
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 via blutooth (firmware prob) to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all

pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all not even if i press skip track forward or back on the unit it doesn't function everything works except that. on listening to radio or anything else related not pairing thru Bluetooth unit works fine, seems there to be Bluetooth update that is not making iPhone and unit not compatible at all. does pioneer need fix this problem with update firmware or thru apple need help. my iPhone was working fine before with previous ios 5 before.

Dear Valued Pioneer Customer:
We would like to inform you of the availability of an optional Bluetooth® firmware update (HW05-SW01.27.20) that enables Bluetooth AVRCP control and metadata display from a compatible Pioneer CD or DVD Receiver when used with an iPhone® 5 or iOS 6 device. If you do not own an iPhone 5 or iOS 6 device, there is no need to install this update.
This firmware update may be used only with the following 2012 Pioneer products:
CD Receivers
DVD Receivers
DEH-P8400BH
DEH-P9400BH
DEH-80PRS
AVH-P2400BT
AVH-P3400BH
AVH-P4400BH
AVH-P8400BH
In order to perform this update, the following items are needed:
A Pioneer CD or DVD Receiver above with built-in Bluetooth
Laptop with built-in Bluetooth running Windows® 7
Bluetooth firmware update (HW05-SW01.27.20)
How to Obtain the Free Firmware Update
1. Download the INSTRUCTIONS for the optional Bluetooth firmware update (HW05_SW01.27.20).
2. Download the UPDATE FILE to a computer and transfer the file to a compatible 2012 Pioneer CD or DVD Receiver via a Bluetooth-enabled Windows 7 laptop.
You can also arrange for Pioneer to update your 2012 Pioneer CD or DVD Receiver by calling Pioneer Customer Service toll free at 800-421-1404 during regular business hours (M-F 10AM-7:30PM Eastern Time, except on holidays). If this firmware update is performed by Pioneer, there is a charge of $60.00 (this charge includes return shipping of the updated unit within the U.S.). Charges for removal/reinstallation of the unit and shipment to Pioneer are the customer’s responsibility.
How to Determine if the Firware Update has Already been Installed
CD Receivers:
• With the unit turned off (press and hold the source button until the CD Receiver turns off), press and hold the center of the volume knob to bring up the Settings menu → rotate the volume knob until "BT Version Info" is displayed and then press the center of the volume knob → The firmware version should show HW05-SW01.27.20.
DVD Receivers:
• With the unit turned off (press the home button and select ‘OFF’ from the source icons), press the home button → Press the “System” icon at the bottom of the screen → Select the “Bluetooth Version Info” option → The firmware version should show HW05-SW01.27.20.
If the Bluetooth firmware version shows HW05-SW01.27.20, no further action is necessary.
Questions
If you have any questions, please contact the Pioneer Customer Service Center toll free at 1-800-421-1404, Monday through Friday, 10:00 a.m. to 7:30 p.m. (Eastern Time), except on holidays.
Sincerely,
Pioneer Electronics (USA) Inc.

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

I have just installed a new hard drive in my imac intel 20" (2006) and now the hard drive does not show up in the 'select destinations' folder of the install program.

I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.
It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.
If anyone has any suggestions I would be happy to hear them.
I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer. No good.
Anyone?

Thats correct. I can see it in the list however when I attempt to erase it or partition it it's like it's not being found or recognised and it throws up the input/output error message. I am pretty sure that the sensor it attached correctly and it is a SATA drive. I can see all the infor regarding the drive when disk utility is open and it all looks good but I cant access it or do anything with it. It's taunting me!
The install disk is in the drive and the install program runs right up to the point where you have to select the location for the install and there is just nothing in the box where you have to select the hard drive icon.
I have my suspiscions about the drive but any help would be appreciated.

I generated a new Itunes Account and now the App sync. does not work with theapps I bought with the old account. Is it possible to merge the old and the new account ?

I generated a new Itunes Account and now the App sync. does not work with the apps I bought with the old account. Is it possible to merge the old and the new account ?

It is not possible to merge Apple IDs.
Why did you create a new one?

Have just downloaded iTunes 10.5.2.(11) onto Mac Book Pro and now the earphones port does not work. Any suggestions? Annie H

Have just down loaded iTUnes 10.5.2.(11) onto MacBook Pro and now the earphone port is not working. Any suggestions. Annie H

My System Preferences>Soundoutput screen does not have the "Use audio port for" field.
Does your MBP have two separate audio ports - one for line-in and one output port? Then you wan't see that selector.
but the port has started to work again....Reason???
Perhaps there was dirt or something in the jack and the contact was bad.
(or you accidentally put the plug into the line-in jack instead into the audio-out; that happened to me once ).
Regards
Léonie

HT1212 i have a problem, my iphone is disabled and i can not get into it. the power button does not work and the computer i used before i do not have. icloud was not set up on it either. And it will not allow me to connect to my itunes. So what can i do t

i have read ur forgotten password or device disabled after entering wrong password. iphone is desabled dont have computer i conected it to before and power button is broke so how can i get back into my iphone?

You will have to restore the phone and set up as New. See: http://support.apple.com/kb/HT1212. The part you need is near the bottom, "If you have never synced your device with iTunes...". You will lose any content that is not backed up in iCloud.

I had a friend replace the battery in my iphone4 and now the itunes store does not recognize it. I could put it in restore mode and then I would loose all my data. the phone just has the apple on the scree right now. any suggestions

I had a friend replace the battery in my iphone 4 and now itunes does not recognize it. The phone just has the apple coming on and off on the scree.
I put it into restore mode last night but did not apply it because I would lose all of my data.Any suggestions on what I can do.
Thanks
ted

Make an appointment at the genius bar. Take your credit card. An out of warranty replacement is $229. It's cooked.

I dropped my iphone 4s in water and now everytime i plug it in it show a charger pointing to a itunes thing i have tryed to recover it but its not working!! what do i doooo?!?!?!

i was at the beach and was washing my shoes off then it fell in the water it was working alright but then it died and will not turn on and keeps showing the same thing i have tried to recover the iphone a couple of times but its saying the same thing.. do i have to go get it repaired if so how much... please help!!!

If you are talking about the warranty from Apple that would have expired when your iPhone hit the water. So it doesn't matter. Just take it to Apple and purchase an out of warranty replacement for it.
Allan

My iphone fell down and now the home button is not working well and the phone is making calls itself?

i already updated my phone and download he latest version of itunes. The Siri is turned off and the voice control appers alone and start makiing calls itself. please help me!!

It's pretty clear your Home button is becoming easily stuck in the active position, causing Siri to activate and, based on what it hears, make calls.
You need to hand the phone in and get it fixed. Shouldn't cost you too much. Try to find an Apple Authorised Repair Centre in the first instance. Follow this link and choose your country to see if there's one nearby.
HTH.

Froze on black screen and power button does not work

my sons ipod touch is stuck on a black screen when plugged into the computer got a spinning wheel and will not connect now spinning wheel will not go away the power button does not work so can not reset it manually
any suggestions would be appreciated

- iOS: Not responding or does not turn on
Neglect the reset and when it says place the iPod in recovery mode use one of thes programs
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

HT204150 I dropped my iphone 4 in water and am using an older iPhone as backup. When I restored my contacts/calendar, etc. Only the calendar updated correctly. No notes transferred over and my contacts are from a year ago. How do I get my more recent c

I dropped my iPhone 4 in water and cannot get it to dry out enough to turn back on. I may have fried the battery. I am using an old iPhone 3 temporarily but cannot get all of my current info to sync. My calendar is up to date but none of my notes have transferred over and the contact list is from when I originally used the iPhone 3 last year. How do I get my iPhone 4 info synced onto the iPhone 3?

Welcome to the Apple Community.
You can't restore an iPhone 3G from an iPhone 4 backup. Until you get a replacement you can access your iCloud data at iCloud.com on a computer.

I dropped my iphone 3gs in water and grabbed it immediately out. It gave me a charger is not supported with device screen every minute or two. I powered it off for the night. I havent experienced problems since. Why does it still work?

I dropped my iphone 3gs in water and grabbed it immediately out. It gave me a charger not supported sign every minute or two. I decided to turn it off for the night and the next morning it worked fine and only the bottom sensor was triggered. Why does it still work and how long will it last?

Water in itself will not kill electronic components if you let it dry out. Your first reaction to turn it off was a good one but you could have waited even longer.
It also depends what's on your water that will stay after the water itself had dried; like salt. Anything that iseither acid or conductor left on the circuit board will reduce the life of the board. Given said this, no one could state how long your iPhone will work since no one will know for sure where the water had time to infiltrate before you removed your device and no one what's may left there.
Consider yourself lucky. I don't understand however what you mean by a sensor triggered.

I dropped my IPhone 6 plus in water and now the power button does not want to work

Similar Messages

Maybe you are looking for