I error had the message msvc480.dll and uninstalled all apple files, trying to reinstall and nothing happens. It says I have installed it, but nothing is on my computer.
I received the error message MSVCR80.ddl and was advised to uninstall all itunes/apple files, which I did in the strict order they said. I then tried to reinstall Itunes 11 and while it comes up to say i have installed it, nothing is on my computer? what can I do now?
See Troubleshooting issues with iTunes for Windows updates. See the further information area for tips on redownloading.
tt2
Similar Messages
-
Suddenly most of the applications have no sound and I can't adjust the volume, and when I try with the volume button, appear the message "sound effect" and nothing append
Hello, Miryam Maria.
Thank you for visiting Apple Support Communities.
I see you are experiencing issues with sound on applications when playing video/audio content. If this is the case, the first thing I would check is if the side switch is set to silent as this can cause applications to be mute. Below I have included an article that covers adjusting the settings for the side switch. Also, make sure to close all applications in Multitasking and power cycle the device. Test the sound issue after processing these steps.
iPad: Understanding the side switch
http://support.apple.com/kb/ht4085
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Cheers,
Jason H. -
can any anyone help i have been trying to install itune's onto a new computor with windows 8 i keep getting an error #2324.i also tried to unstall itunes,quicktime etc. and get the same message please help!!
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ appstore.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting. -
The ipod icon does not appear on itunes. I followed all the troubleshooting help. Uninstalling all programs related to ituens and itunes. veryifying uninstall restarting computer, installing again. I bought this ipod at a thrift store. BUT IT WAS BRAND NEW in the package, never opened. checking serial number on apple they want a fee of 19.00 to give me help! I paid 40 for the ipod so not worth it. but if anyone has an idea for how I can get this to work. Pleaseeeee
Did you try everything here:
iOS: Device not recognized in iTunes for Windows
including
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Run this and see if the results help
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if you have an iPod or computer problem
You do have the latest iTunes, version 11 on the computer, right? -
I had i tunes but the other day,but this came up
msvcr80.dll was not found and it told me to re-install
this application and to download i tunes again.
so i uninstalled i tunes and now i cant install i tunesGo to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
I've uninstalled and reinstalled iTunes several times and each time it says to re-install iTunes but it doesn't solve the problem. I've been trying to get this to work all day and I'm extremely frustrated. Someone please help me with this. I've done all the reserach on how to fix this and nothing has worked. I just get the same message over and over again.
When I go do download iTunes I get a screen that says, "The feature you are tyring to use is on a network resource that is unavailable." Then is says "Click OK to try again, or enter an alternate path to a folder containing the installation package iTunes64.msi in the box below". I click "OK" and it says that the path cannot be found. Don't know what do to here.
Sounds like at least two different things are happening to you at once here.
Steps for dealing with the "network resource" message, follow:
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Error, posting the message
Why do I always get: 'Error, posting the message. Please make sure all required fields are entered' when I had not been given the option in the first place.
You can tell I am finding this interface frustrating. Why is Apple using software that they cannot (or will not) fix and which consistently performs worse than many other services?
Its one good point (for me) is the spelling check.
Xserve Other OSIt looks like the control data for the child segment is not getting populated. you have to find the code which populated the control data and see if it is doing what it should.
-
I was recently prompted to update my Itunes player to the latest version. I'm using Windows Vista. I was left with an error message MSVCR80.dll and consequently no new update. I uninstalled the old version and have tried to reinstall manually several times. No luck. Consequently I have no player.
Any ideas for a fix?Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
I have had audition for 2 years. Today it crashed. It gave a configuration error: 16 The message said to uninstall and reinstall. I did. Still the same error. Then I searched forum and checked the two folder permissions. They were correct. So what do I do???????
Hi Charles,
Please refer the following helps article on the problem.
https://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html
Hope this helps.
Regards,
Sumit Singh -
Experiencing trouble syncing with the 10.3 version of iTunes on my Windows Vista machine. Have uninstalled all Apple software twice, reinstalled and continue to get an error 7 message in connection with the Photo Processor. Any other ideas to try?
Hi,
got it fixed! My Son had both files on his Win7 iTunes installation. Never mind he had no issues whith ths iTunes and iPhone Sync. So I checked my other Win XP PC, where I don't have this problem syncing my ipad, and surprise. Both files do NOT show up on this PC. So I renamed the iTunesPhotoProcessor.exe I found under c:\program file\iTunes and synced again my iPhone and it went through without any error. So the problem might be and unremoved iTunesPhotoProcessor.exe or the missing iTunesPhotoProcessor.dll under the iTunes install root folder and this even if I had checked that the folder was completely removed during iTunes unistall.
Please try yourselve and just rename the iTunesPhotoProcessor.exe to iTunesPhotoProcessor.exe_ under c:\program file\iTunes or get a copy of the missing iTunesPhotoProcessor.dll and cp to c:\program file\iTunes. -
Errors/warnings occurred when generating the local proxy dll and VI wrappers for web service
Hello,
I'm new to web services - trying to import a WSDL that was created by an outside vendor and placed on a company server. I imported a previous version successfully. The error I'm getting doesn't make a lot of sense to me, here it is:
The following errors/warnings occurred when generating the local proxy dll and VI wrappers for this web service.
Can't generate files.
Possible reasons are:
1. The output file(s) might be read-only.
Remove the read-only attribute and import the Web service again.
2. A proxy DLL that LabVIEW created under the same file path exists in memory.
Restart LabVIEW and import the Web service again.
I don't see any read-only attributes on the output files and I've tried restarting LabVIEW - no luck. Any help is greatly appreciated.
Thanks,
Al Rauch
Merck & Co., Inc.Aaron,
I was able to successfully import and run the web services from the WSDL file in question in LV2009 on a different computer than the one on which I had the original problem. Unfortunately I am still having the original problem on the project computer and will need to get it working there . . . still looking for a solution to that. Apparently LV2009 is perfectly capable of importing and running this WSDL file, but there is something still in the way on the project PC.
Thanks,
Al -
Hi, I have just had the message - download itunes again as you cannot burns cds etc - this sometimes happens said the message. So I removed itunes and downloaded it again and now when I click to open it says 'itunes library .it' cannot be read as it was created by a newer verson - help!
See Empty/corrupt iTunes library after upgrade/crash.
tt2 -
Recent ITunes update has caused ITunes not to work. Tried uninstalling all Apple products and reinstalling fresh. Still doesn't work. Tried reinstalling from an old install.exe. Install went nicely but program won't start as it says it can't open the library file.
Now that I have no way of accessing any of the products I have purchased from ITunes, I will most certainly never use ITunes again for any reason. Why throw good money after bad? I will use another MP3 player that is not as cumbersome or proprietary.
Lesson learned. -
I have been getting error messages .n MS windows the APS Daemon ,exe is unable to locate a component and the itunes updates and program failed to start because MSVCR80,dll was not found. As advised I have uninstalled all Apple Inc. programs except the Apple Mobile Device program. Then I reinstalled itunes but still get the errors and can't run itunes. Advice....
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
When trying to upload a document or attach a document in an email Firefox gives me an error "Failed to load CTDFMRES.dll" and stops responding, I have no issues in any other browsers. And I am using Firefox 4, Fixes???
You don't have to disable any addons or extentions!!!You guys are not going to believe this I figured out the problem it's really dumb...ok here goes the attachment uploader loads seperate so I got to thinking it's a popup so I went to options content and under block pop ups there is an option exceptions click on that and in the box type firefox.com and hit allow pow its fixed!!!!! :-)
Maybe you are looking for
-
'12 Mini to Older Receiver via Optical - Can't get 5.1 Surround
Yet another "Can't get surround sound via Toslink" question... System: 2012 Mac Mini Video to Sharp HDTV via HDMI Audio to Pioneer VX-D608 Receiver via Optical I have the cables connected properly. Video is flawless. Audio is being transmitted to the
-
I am using EclipseLink to auto populate the column on inserts. (column i want it to auto update is COMPANY_ID) Table is like COMPANY_ID EMPLOYEE_ID NAME SALARY AGE My entity is @Entity @NamedQueries({ @NamedQuery(name = "EmployeeVpd1.findAll", query
-
When i open Elements 11, I don't get anywhere to log in. Can I save my photos online in my account?
-
How to convince parents to buy a macbook pro
i want a macbook pro extemely bad ! im in high school and all im taking is AP and IB classes . my mother doesnt seem to think i need one . please help
-
ADFC-00008: DataControlFframe has not been found by ADF controller.
The original error is given in Spanish. In the subject I have tried to translate it to english, but the meaning is the same. When running my application, every time it raises an uncontrolled error (FileNotFound or any other java exception, for exampl