I found my problem! :(

so i found the problem with my ipod. after trying EVERYTHING i could, including everything on this site, and on http://www.methodshop.com/mp3/articles/iPodSupport.shtml whitch i strongly recomend you try, i decided "hey, i fixed my laptop by takeing apart the h-d, and as it turns out the arm was loose. well, i did the same to this ipod, and it was horrible. the arm must have somehow gotten bent, because the disk was completely scratched. it was pretty bad. now the question is, does anyone know where i can buy a 4g 20-40 gb hd? for less then the price of repair or a new one? any help would be awesome. andi doubt this is the same problem you all ahve had, this on was dropped on a hard bed from a high place. didnt think bed would do anything bad, but i was wrong. anyhow, anywhere to get a hard drive would be nice. thanks

Similar Messages

Document Creation error - "We're sorry. We can't open document name because we found a problem with its contents"

Morning Friends,
I have created a SharePoint 2010 "Site Workflow" that is designed to take information from a form and create a Word doc with the gathered information and store this Word doc in a document library.
I am using Sharepoint 2013 with Office 2013
I understand there are a lot of steps (19) outlined below and I can provide more information as needed but the bottom line is this, workflow successfully takes info from an initiation form, uses the info to create a Word doc. Places this Word doc in a library.
When attempting to open / edit doc, receive error
"We're sorry. We can't open <document name> because we found a problem with its contents"
Details - No error detail available.
Any info or advice would be greatly appreciated.
Very high level view of what I have done:
1 - Created content type called "Letters"
2 - Added site columns " First Name" and "Last Name"
3 - Created and saved to my desktop a very basic Word document (Letter.docx) that says "Hello, my name is XXXX XXXX"
4 - In the advanced settings of the "Letters" content type I uploaded this "Letter.docx" file as the new document template.
5 - Created a new document library called "Letters"
6 - In Library Settings - Advanced Settings, clicked "Yes" to enable the management of content types.
7 - Then I clicked "Add from existing content types" and added the "Letters" content type
8 - Back in the advanced settings of the "Letters" content type I selected "Edit Template" and replaced the first XXXX with the Quick Part "First Name" and the second XXXX with the Quick part "Last Name"
9 - Created a new 2010 Site workflow called "Create a Letter"
10 - To the workflow I added the action "Create List Item"
11 - Configured the action to create Content Type ID "Letters" in the document library "Letter"
12 - For the "Path and Name" I gave it a basic name of "Letter to"
13 - The next step was to create the Initiation Form Parameters and added to form entries "First Name" and "Last Name"
14 - I then linked the initiation form fields to the data source "Workflow Variables and Parameters" to their respective Field from Source parameters
15 - Went back to the "Path and Name" and modified the basic name of "Letter to" to include the first and last name parameters.
16 - Saved - published and ran the work flow.
17 - As expected, Initiation Form prompts for First and Last Name. ("John Doe") Then click "start
18 - Go to document library "Letters" and see a new Word document created titles "Letter to John Doe"
19 - Go to open / edit the Word document and receive the following error
thoughts? Any info or advice would be greatly appreciated.

See this MS support article for SP2010 workflows and generating Word docs:
https://support.microsoft.com/kb/2889634/en-us?wa=wsignin1.0
"This behavior is by design. The Create
List Item action in the SharePoint
2010 Workflow platform can't convert Word content type file templates to the correct .docx format."
I've had success in using SP 2013, Word 2013 (saving a .docx as the template instead of .dotx for the document library content type), and an SP 2010 workflow using SP Designer 2013.

Cannot get Genius to work - Always get same error message - "Genius results can't be updated right now. The required file cannot be found." Problem also seems to be affecting iCloud aand Music Match.

Cannot get Genius to work - Always get same error message - "Genius results can't be updated right now. The required file cannot be found." Problem also seems to be affecting iCloud aand Music Match. Can anyone help me with this? What file is missing and from where?

This is a known problem with Windows 7 Enterprise using certain Group Policy settings. Solution for me was to use another machine running Windows 7 Ultimate.

Flash Player 11.3.300.262 Not working with Firefox. I think I found the problem.

*Flash Player 11.3.300.262 is not working with Firefox. I think I found the problem.*
Millions of people got off work & turned on there computers recently to discover that Firefox is not playing any videos or flash content. Just like me, millions of people are randomly searching the internet in a futile & frustrating attempt at answers. Unfortunately, many of those people will simply stop using firefox & deem it a glitchy, unreliable browser.
This happened to me a couple days ago. I started up my computer & got a pop-up from Adobe saying that I need to update my flash player to 11.3.300.262. I've always thought of adobe as being a reliable software company, so I clicked on it with confidence that things will be working even smoother. To my horror, I relalized that right after the update, my main browser, firefox was destroyed. Then I went on the frustrating process of uninstalling, re-installing, running virus scan, researching the internet like a lost child. I said to myself, "that's why I hate updating stuff, because updates always seem to change stuff you don't want it to change & there always seems to be a problem with the updates." I usualy update software months after it releases, because microsoft & all the other software companies always seem not to test there stuff properly before releasing them. Then we have to look at a glitchy computer until the next update fixes it. Well, that is my rant. Now let me discuss the problem I found.
Problem:
What I did was, go into my firefox extentions menu & I disabled the 11.3.300.262 & I re-enabled the previous flash player. After that, everything worked perfect again. Then a today (a week later), I turned on my computer & my firefox wasn't playing any videos or flash content again. I went into my firefox extenions menu again, & I discovered that my old flash player had been deleted, & this new glitchy 11.3.300.262 had been enabled. Why did adobe feel the need to into my computer & automaticly delete & update my flash player. Now it doesn't work. THIS IS REALY FRUSTRATING!
The Issue I discovered:
"RealPlayer" is the most popular video program & it is installed on millions of computers. For some strange reason Firefox does not want its users to use Real Player. Specifically the RealPlayer Browser Record Plugin 15.0.2. I also discovered that my Browser Record Plugin 15.0.2 was automatically disabled when the Adobe 11.3.300.262 was automatically updated also.
- Maybe this could be because of some copyright conspiracy to keep people from downloading videos from the web.
- Maybe firefox wants people to use there download add-on instead of RealPlayers downloader.
I don't know what ther reason is. But what I do know is Nobody is going to delete there RealPlayer from there computer just to use FireFox. We can simply use Chrome or Internet explorer. I took the advise from Adobe & disabled the FireFox RealPlayer Extention. I also went into my RealPlayer preferences options, But there was no option to disable download recording from FireFox. BECAUSE I ALREADY DISABLED THE ADD-ON in FireFoxes menu.
Solution:
Step 1: Adobe needs to update all the computers with the previous flash player. That way we can choose to enable the previous flash player in our FireFox. or wait until a new update fixes the problem with firefox.
Step 2: Adobe & FireFox need to get together & go back to the drawing board. They need to create a update that actually works on computers that have Real Player installed on them. I don't care which company does the update. All I care about is if it works. Thank You.
Oh yea, Im running FireFox 13.0.1, Windows 7, HP computer, Real Player is up to date.

Hey Chris,
I was able to duplicate this issue on my Windows 7 laptop as follows:
     1) Completely uninstall FlashPlayer (using your tool) as well as Mozilla Firefox and Mozilla Maintenance Service (used Windows 7 - uninstall from Control Panel). Please note that I checked the box that said "Remove my Firefox personal data and customizations" to ensure that Firefox was completely gone from my laptop.
     2) I then went out to the Firefox website and downloaded the "Firefox Setup 13.0.1.exe" app to my laptop. I ran this app to install Firefox.
     3) I then went to the following website http://www.ishmael.org.uk/karaoke02.php as I know that this URL uses Flash Player (obviously you can go to any URL that uses Flash Player - I'm just letting you know which one I used). I then clicked on the icon on this page to install Flash Player.
Once the install was completed, the URL stops responding and appears to be locked up (although it will occassionally hiccup and display portions of the page and then lock up again). You will eventually get a pop-up notice from Firefox that has the header "Warning: Unresponsive script" and says the following:
     A script on this page may be busy or it may have stopped responding. You can stop the script now, or you can continue to to see of the script will complete. Script: chrome://browser/content/browser.js:6551
Selecting "Stop script" will get Firefox working until you hit another page that uses Flash Player.
To ensure that the above URL is not the culprit, I used one from your website http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html and had the same results.
Hope this info helps!
Jeff
NOTE: As a reminder, I do not have RealPlayer installed on my laptop (and never have had it installed)

MacBook Pro will not boot up. Hardware test found no problems.

MacBook Pro will not boot up. Hardware test found no problems.

Sorry. What I mean is I selected the SL boot up in the start up panel and it would not boot into the cd. The CD rom sounds like it just keeps reading with it slowly loading from grey screen to blue screen to the Block screen. Almost like it is booting into normal mode from the hard drive.
What I can't understand is why it runs fine is Safe mode?
Also why do I get a " this disk cannot be used to start up your computer" message on my hard drive when trying to install Lion in safe mode? Well why not it's the only hard drive in the computer?
The first screen shot is the Tech tool showing everything passed the hardware test is safe mode.

Should I pay the $245 for support? I ask because every time I have they could not fix the problem, I found the problem on my own.

I ask because every time I did call they could not fix the problem, as in I could not send mail, I was told it was my Internet, then they tell me it is my computer. After spending many many hours on the phone with Apple, I was told I had to reload my hard drive. Which by the way takes a lot more then a few hours. The next day I found I still had the same problem. I could not send mail... I found the problem my self// I didn't have a mail box set up to send mail. How sample that was. Then the next time if I wanted to empty trash I had to turn off the computer then reset to do so. When I called tech support she tells me that is normal and they had to do the same thing every time. Well she is wrong in that if you use "empty securely" and not the one that just says empty trash then you do not have to reset or turn off your computer.... So I ask what am I paying $245.00 for? I am sure I will need support at some time, and at least it does give me someone to talk to.

starwalls wrote:
I thank you all for all the replies..
I will be buying the service plan if only for the hardware... I really can not say much about the other support, other then every time I get a female support tech she seems to not know what she is talking about and says that is the way it works... I just keep calling back until I get someone that will know a little to help fix the problem. And yes I hate to say is most likely a male tech.
I do agree apple is NOT what they started out to be... How sad!!! MADE in CHINA very SAD. And here I thought I was buying USA.......
FYI - there has not been a name brand consumer personal computer actually manufactered in the USA in years. Lenovo, Dell, HP, Acer, Apple, Samsung,... - you name it they are ALL made in China or Tiawan. Often many of those brands are being assembled by the same Chinese company in the exact same factory, pulling parts (hard drives, displays, RAM, etc) from the exact same bins. Foxconn for example, which makes iPhones and iPads for Apple, also makes dozens of other makes and models of tablets, ereaders and smart phones for other companies. Like it or not, but the consumer electronic manufactering center of the world is China.
The only consumer computers actually made in the USA these days are by local custom build companies, and it has actually been that way for many years now (I think twinhead may have been one of the last with a plant in the USA - they are still around, now GammaTech, and they still do their "final assembly" in the USA but most of thier manufacturing is done in Tiawan and Malaysia).
By and large, the USA has been out of the actual consumer electronics manufacturing/assembly business for a decade or so now.

Install 10g R2 Win XP,P4,The oui.exe found a problem and need to be closed

Oracle Database 10g Release 2 10.2.0.1.0 Win32Bit
On my computer the Universal Installer that comes with the 10201_database_win32.zip Download fails at startup.
I try the the setup.exe and the oui.exe in the "install" subdirectory, but i get the same error message.
Oracle Database 10g Release 2 (10.2.0.1.0)
Enterprise/Standard Edition for Microsoft Windows (32-bit)
Oracle® Universal Installer 10g Release 2 (10.2) for Windows
System:
Microsoft Windows XP Professional Version 2002 Service Pack 2
Intel Pentium 4 CPU 3.00 GHz
2.99 GHz, 0,99 GB RAM
Firewall disabled.
No logfile is created.
Error message:
oui.exe hat ein Problem festgestellt u. muss beendet werden.
The oui.exe found a problem and need to be closed
And then I get the windows message "The oui.exe found a problem and need to be closed."
(Followed by the offer to send a report about the problem to Microsoft.)
Someone knows this problem and could help me?
Thank you
Den

I got it going.
This was the 10.2 download from OTN installing to MS Windows XP SP2.
Turns out that OUI won't start if the total length of the full directory path string is too long (to setup.exe or oui.exe). Solution was to move it closer to the base directory ("\") or to rename directories to make them shorter.
Den

I used firefox 3.6.14 on windows 7 x64 (firxfox x32). I found a problem when I develop my website and alert data or value via javascript , firefox hang (not response) every time. What's happend? How to solve is problem?

I used firefox 3.6.14 on windows 7 x64 (firxfox x32). I found a problem when I develop my website and alert data or value via javascript , firefox hang (not response) every time. What's happend? How to solve is problem?
Thank you for help
Lohkaeo

Oops - for some reason, this problem now seems to have gone away. May have had something to do with Flash. I'll keep my fingers crossed.

Keynote conversion: Powerpoint found a problem with content....

Hi all,
MS office is killing me and I'd appreciate any pointers and comments
Here's the situation:
1. Keynote file (multi-revised over the years) exported to powerpoint file XYZ in New-MBP
2. New-MBP opens XYZ and gets "found a problem with content in..."
3. Click on "repair", open up XYZ, and get bunch of blank pages
4. Same XYZ file copied to Old-MBP(freshly installed, now my home media server, not many apps installed).
5. Same version of Office 2011 installed in Old-MBP, opened the file just fine!
(so the problem is not NewMBP Keynote)
6. Created a test account in New-MBP
7. Attempted to open XYZ with Powerpoint
8. Same "found a problem with content in..."
9. Click on "repair", open up XYZ, and get bunch of blank pages
(so the problem is not user/privileges, but the NewMBP system-wide issue?)
10. In New MBP, created a brand new Keynote file, did some light work
11. Exported new keynote file to powerpoint file RRR
12. In New-MBP, RRR opened under Powerpoint 2011 just fine!
(so the problem might be the original multi-modified Keynote file?)
(But its powerpoint file XYZ opened in Old-MBP just fine!)
I've uninstalled and reinstalled Office 2011, with SP1, still cannot open XYZ properly.
I've copied all Office 2011 files from Old-MBP to New MBP, still cannot open XYZ properly.
I"ve googled the problem and tried anything I could find, still cannot open XYZ properly. (deleting presenter notes... etc)
My current conclusion: some kind of software system conflicts in the New-MBP.
Anyone with any ideas?
Thanks a lot in advance.
Will

Hi Will,
Met the same issues and spent hours to find the problem. And guess what ? I found it :-)
For some reason, groups are not supported by Powerpoint converted files.
This is why every slide that contains group is not converted.
The workaround is to ungroup all the groups in your keynote file (alt+cmd+shift+G) and you'll see your slides being converted again.
I'm not sure where the issue is coming from. I would tend to think it should be resolve by the Apple Keynote team.
Not sure whether it has been escalated so far.
There might be some other small issues. One or two slides were not properly converted although they were not containing group, but this should fix most of them.
Have fun degrouping your slides

I think I found a problem with the calculator application.

I'm a south korean highschool student and I think I found a problem with calculator application. I use iPod touch 4th generation with iOS 5.0.1. I was playing with calculator app and I found out that 0.1!(factorial) is 0.951350769866873. This can't be right bacause factorial calculation can only be definrd whan n is natural number or 0(in n!). I want apple to correct this error.
And if you are someone working with apple, please let me know the algorithm of factorial calculation(if possible). I would be grateful if I can have a chance to study the algorithm and find out what made 0.1! possible.
so question.
do anybody know how to send an email to apple? I tried but I couldn't find the address.

Apple doesn't dialogue with users via email the way you want, but you can report such problems to them via
http://www.apple.com/feedback/
But in this particular case you should be aware that factorial can in fact be done for non-integers:
http://en.wikipedia.org/wiki/Factorial#Extension_of_factorial_to_non-integer_val ues_of_argument

Hello I just found a problem with my Ipod nano 6th generation. It worked fine an hour ago but then the screen turned a dark grey. Did the restore through Itunes and then it went white. But now it's totally unresponsive and seems to be off even when it is

Hello I just found a problem with my Ipod nano 6th generation. It worked fine an hour ago but then the screen turned a dark grey. Did the restore through Itunes and then it went white. But now it's totally unresponsive and seems to be off even when it is plugged into itunes. Can't even restore it. I get Error 1415?

Hi clarity,
Welcome to Apple Support Communities.
You may want to first try removing and reinstalling the latest version of iTunes by following the steps in this article:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
If you continue to receive the error message when connecting your iPod, see this article for more troubleshooting tips:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/TS1814
Best,
Jeremy

Hello i have Iphone 5 but reccently it found the problem on lcd . there are somelines on the screen and i have a probelm with sms and dial No.s

Hello i have Iphone 5 but reccently it found the problem on lcd . there are somelines on the screen and i have a probelm with sms and dial No.s

Then you have to bring it back to the country you bought it from. Warranty is not International.

HT4356 Can't find the wireless HP 3050 printer via phone or I pad. Printed test page found no problems and stated setup was successful. Any idea what the problem is? Thanks. is

Can't find the wireless signal from my newly installed HP 3050 printer via I phon or I pad. Printer test page found no problems and states successful setup. Any ideal on the cause of the problem? Thanks.

Hello Sashalechat,
Welcome to the HP Forums.
I see that you are having an issue when attempting to connect to a wireless network.
Have you changed the router for a new one?
Make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Make sure that you are with in the 4'-20' range.
You can try the HP Print and Scan Doctor as well. Let me know if you see any error codes or messages.
Write me back when you have time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Mat****a UJ-8315: Error message - windows found a problem

I'm trying to copy a film to a dvd/cd and the windows always display the message: windows found a problem.....what might be wrong ?

Hi
Usually its not possible to copy the original DVD movies with the simply burning application because of the copy protection.
Did you get also this same error message if you will copy simple files on the CD or DVD? If not so I assume the medias are copy protected and therefore its not possible to burn the medias.
The second possibility is that you use not compatible medias. Usually in the user manual of your notebook you will find a list of tested and supported medias which should work properly.

MacAfee Virtual Tech Found 2 Problems

Hi there I am new to the forums.
(not at all a Tech Wizard)
My McAfee antivirus runs really slow-just lately, & takes forever to do a complete scan.
So I opted to Run the MacAfee Virtual Tech & it has found 2 problems. (pasted below report)
I have contacted via e mail direct MacAfee web site but they stated to contact BT.
Should I reinstall My MaAfee program completely start from scratch.
Any help much appreciated
Ty Vee
Registry
OK
File
1 file(s) incorrect
Expected File not Present
File: c:\program files\mcafee\virusscan\%mvt_lcid%\mvsdeflt.dll
Process
OK
Service
OK
COM
OK
DAT and Engine
1 DAT / Engine update
DAT not Up-to-date
DAT: Expected : 6480
Existing : 6479
Patches
OK
Top Issues
OK
SYSTEM
OK

RE the dat : just update Bt Netprotect plus it will be OK (or let MVT update it for you)
RE the missing file; it is a known Mcafee problem see this thread https://community.mcafee.com/thread/39015?start=0&tstart=0
IGNORE THE BIT ABOUT UNINSTALLING - read the whole thread
So it is a McAfee Virtual Tech problem not a problem with your Netprotect plus, hope this helps.

I found my problem! :(

Similar Messages

Maybe you are looking for