I found warning after ran Best practice analyser Tools in exchange 2010

Hello ,
when ran Best practice Analyse tool i found some warining :
1-DNS 'Host' Record Appears to Be Missing
2-Active Server Pages is
not installed
3-Application log size
4-Self –sign certificate found:
is strongly recommended that you install an authority-signed or trusted certificate
The SSL certificate for 'https://exchange.mydomain.com/Autodiscover/Autodiscover.xml' is self-signed. It does not provide any of the security guarantees provided
by authority-signed or trusted certificates.(i have ssl certificate form geo cert Turst ) all users you can access mails form owa and they can connect
mailbox using outlook anywhere but with SSL warning.
5-Single Global catalog in topology:
There is only one global catalog server in the Directory Service Access (DSAccess) topology on server CADEXCHANGE. This configuration should be avoided for fault-tolerance
reasons
already checked the below links but i am not understood good :
http://technet.microsoft.com/en-us/library/6ec1c7f7-f878-43ae-bc52-6fea410742ae.aspx
http://technet.microsoft.com/en-us/library/4fa708a1-a118-4953-8956-3c50399499f8.aspx
http://technet.microsoft.com/en-us/library/8867bba7-7f81-42f9-96b6-2feb7e0cea4e.aspx
please advise me to avoid this issue
thanks

i have 2 server both server global catalog
my question why warning appear only one global catalog
please explain this.
when test Autodiscover the test successful but when expand menu
i am found some error :
Attempting to test potential Autodiscover URL https://Mydomain.com:443/Autodiscover/Autodiscover.xml
Testing the SSL certificate to make sure it's valid.
Validating the certificate name.
Certificate name validation failed

Similar Messages

Using Best Practices personalization tool

hello,
We wish to usr the Best Practices personalization tool for customer specific data sor baseline package.
I do not understand from the documantation if its possible to use it after installing the Baseline or its have to be done simutanioslly (meenung the personalized data have to be ready in the files before stsrting the baseline installaion)?!
Thank you
Michal

Hi,
Please Ref:
http://help.sap.com/bp_bl603/BL_IN/html/index.htm
Your personalized files to be done before implementaion as you will be using the file during the installation process.
The xml file and the txt files you creat from the personalization tool is used to upload the scenario to the system, or else it will upload the default.
Also ref note 1226570 ( here i am refering to IN ) you can check the same for other county version also.
Thanks & Regards,
Balaji.S

How to use best practices installation tool?

Hello!
can anyone share me some useful links/doc which can guide me how to use best practices installation tool (/SMB/BBI) ?
any responses will be awarded,
Regards,
Samson

hi,
will you please share the same ?
thanks in advance

After Vcenter best practice documentation - running as a VM

Hi there,
We are currently running our vcenter as a physical machine. A few weeks back I saw something on twitter saying vmware had changed their best practice to recommend running vcenter as a virtual machine. We are looking into this as a way of running one less physical server.
Can anyone point me in the direction of any (revised) good practice documentation from vmware?

here's a couple things as well
http://www.vmware.com/pdf/vsphere4/r40_u1/vsp_40_u1_esx_vc_installation_guide.pdf
Although a little dated, it still applies
http://www.vmware.com/pdf/vi3_vc_in_vm.pdf
I would also consider setting your restart priority to HIGH for your vCenter VM. If you run your vCenter DB instance on a VM, I would also consider setting us a DRS rule to keep them together for better performance, as well as setting a HIGH restart priority for your VCDB

Best Practice - Hardware requirements for exchange test environment

Hi Experts,
I'm new to exchange and I want to have a test environment for learning, testing ,batches and updates.
In our environment we have co-existence 2010 and 2013 and I need to have a close scenario on my test environment.
I was thinking of having an isolated (not domain joined) high end workstation laptop with (quad core i7, 32GB RAM, 1T SSD) to implement the environment on it, but the management refused and replied "do it on one of the free servers within the live production
environment at the Data Center"... !
I'm afraid of doing so not to corrupt the production environment with any mistake by my configuration "I'm not that exchange expert who could revert back if something wrong happened".
Is there a documented Microsoft recommendation on how to do it and where to do so to be able to send it to them ??
OR/ Could someone help with the best practice on where to have my test environment and how to set it up??
Many Thanks
Mohamed Ibrahim

I think this may be useful:
It's their official test lab set up guide.
http://social.technet.microsoft.com/wiki/contents/articles/15392.test-lab-guide-install-exchange-server-2013.aspx
Also, your spec should be fine as long as you run the VMs within their means.

1080i to 720p via After Effects Best Practice?

Hi, I have some footage which was shot at 1080i, the required output is going to be 720p. The problem is that I would like to use some of the extra frame to reframe some of the shots and as there were two camera's used, the colour varies, so I will also need to fix that.
My initial plan was to cut the sequence in Premiere using a 1080i preset then DL the sequence from within After Effects using a 720p composition. From here I can do the reframing and colour work. However will this take care of deinterlacing? Or does anyone know of a better workflow to get the results I need?
Cheers

Just to update this incase somebody else finds it useful, decided I would have to spend some time testing the best route before actually starting the project.
So the source footage was shot @ 1080 50i AVCHD (Cannon Legria HF21 and Panasonic HDC-HS700). The desired outcome of the footage is web distribution, so mp4 @ 720p 25fps.
During editing I really wanted to re-frame some of the shots and also give some motion to some i.e. slow panning. On top of that the two cameras used, always seem to give different colours in post - no matter how much you try to match the LCD display's during the actual shoot.
Ok so the problem I initally encountered was with jaggered edges when deinterlacing (can't afford any third pary plugin's at the moment).
So that's the background - I tried a couple of different routes, however the best way I have found is to edit the footage in Premiere using the default 1080i AVCHD preset, keeping the Cannon footage on video 1 and the Panasonic footage on video 2. Once all the editing is done, duplicate the sequence and in one enable video 1 and in the other enable video 2.
Then jump into After Effects use dynamic link to open the the two sequences - here I open the interpret footage settings and make sure that the field order is set correctly and that 'Preserve Edges' is ticked.
I then created a new composition with 720p settings and put the the two Premiere sequences in it. Then it is just a case of using keyframes to reframe the footage. Also it allows for applying different colour correction to the footage shot on each camera.
I also found that this process decreases the jagged edges found going from interlace to progressive.
Hope that helps someone, or someone can tell me I am going the long way round

What is the best practice to move from Outlook 2010 to icloud. I want to sync primarily contacts and calendars.

I would like to move from Outlook 2010 (originally on Exchange) to icloud, however I read lots of bad experiences about this. Has anyone developed a good practice procedure for this? I primarily want to sync Outlook 2010 calendar and contacts with a cloud service and my iphone. I currently use a Dell latitude PC, outlook 2010, have upgraded to iOS 5 on an iphone 3GS (soon to be an 4GS).

I was trying to find the answer to this myself.
I found it.
Use iCloud Control Panel for Windows: http://support.apple.com/kb/DL1455
I found that you don't need to create separate iCloud contact and calendar folders before installing this, it does that for you (in fact, you can't choose what these new folders are called, or where they go, but I guess you're unlikely to have anything else in your Outlook named "iCloud" before you start.)
Mike

Best practice for auditing a SP 2010 BCS scenario with a SQL Server pooled connection.

I'm using SP 2010 BCS to connect to a SQL Server db. For this, I've used SSS and am passing SQL credentials to take advantage of pooled connections. I'd like to pass the user context (user ID/User name) to the database so that I can do auditing, such as
created by and last modified by. What is the best approach to make this work while still using a pooled connection?
I've thought about modifying the external list forms so that I capture and pass down user context info, however, I'd like not to rely on this in case the external content type is consumed by another consumer such as an Office product, etc.

Hi,
There is no good way to do it.
You can set the created by and modified by columns as input parameters for the create and update operations and using ajax to set values for both of columns.
http://troyscott.ca/2010/07/17/creating-an-update-operation-for-an-external-content-type/
Regards,
Seven

Searching for best practice recommendations regarding connecting Exchange calendars to SP 2010

A user has requested assistancing setting up a web part on SP 2010 to display their "on call" calendar from Exchange.
When she attempted it, she got the error that says, in part, "[...]
This could be due to the
fact that the server certificate is not configured properly with HTTP.SYS in the HTTPS case. This could also be caused by a mismatch of the security binding between the client and the server"
I am a bit puzzled as to where to start. The admins for the Exchange server are in another group - it sounds to me like there is some sort of issue going on between SP 2010 and Exchange 2010, but I am not clear on how to proceed so that we can fix it.
I do know that I have noticed in the event logs an Application error event that says that "an operation failed because the following certificate has validation errors" and later "SSL policy errors have been encountered. Error code '0x2'".
In asking around, I was told that the site mentioned elsewhere in the error is a verisign signed site which has chained certificates. I have no idea what specific action triggered the error - the message says
Source: Microsoft-SharePoint Products-SharePoint Foundation
Task Category: Topology
These may be two totally separate situations. I don't understand the certificate concept well enough to be able to determine that.
Does this ring any bells with anyone?

Hi,
Thank you for your question. I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience. Thank you for your understanding and support.
Thanks,
Linda Li
Linda Li
TechNet Community Support

Best Practice about enabling RD

After running the Best Practice Analyser i've been getting the error that the "server should be configured to allow remote desktop connections"
See http://technet.microsoft.com/nl-nl/library/ff646929(v=ws.10).aspx
I've got a GPO which enables RDC for me and works fine. If I go to Remote Settings on the specified server it's cleary enabled.
Still the error kept popping up, only after I disabled the GPO and falling back to the default (local) off setting and enabling it manually, the error is gone. After this I can again apply the GPO without any errors.
So the error is gone now, but I'm still curious why this happened. I should be able to configure stuff through GPO's right? Am I missing something here?
Thanks in advance,

Hi,
Thank you for posting in Windows Server Forum.
The setting which you have configured are all correct, {for information: need GPO setting “Allow logon through Remote Desktop Services” under User Rights assignment must be enabled}. From description seems the GPO setting is not applied\configured
properly and this issue happens. Just be sure to update the GPO once you perform the steps.
Just for reference you can go through following article.
Securing Remote Desktop for System Administrators
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Best Practices for Staging

Hey Guys!
We are currently evaluating Oracle Enterprise Pack for Eclipse with one of our new projects.
As we are moving from development phase to QA, we are looking for ways to standardize the staging process. Up to now we were unable to figure out how or where OEPE creates the artifacts (war & ear files) before they are deployed to the remote target environment (Weblogic Server) for tests during development. We had assumed that OEPE uses a simple ANT file or something similar we could use for our staging environments.
Is there a Best Practice for Staging? What does Oracle recommend?
Thanks in advance - Alex

Hi,
According to your post, my understanding is that you wanted to know the best practices to deploy SharePoint Portal in different SharePoint environment.
If the site is not existing in the production server, we can save the site from the development server, and then import it to the production server.
But if the site is already existing in the production server, we should follow these steps to just add the taxonomy and content types to the production server:
Save the site from Dev as a template
Import the template as solution in Visual Studio
Remove unnecessary items from the solution(Please pay more attention on it. If a content type/list... in the solution is existing in the production site too, it will replace the
same object existing in the production after deployment)
Package the solution
Deploy the solution in the production
For more detailed, please see:
http://ahmedmadany.wordpress.com/2012/12/30/importing-sharepoint-solution-package-wsp-into-visual-studio-2010/
There is a similar thread for your reference.
http://social.technet.microsoft.com/Forums/en-US/7dcf61a8-1af2-4f83-a04c-ff6c439e8268/best-practices-guide-for-deploying-sharepoint-2010-from-dev-to-test-to-production?forum=sharepointgeneralprevious
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Best practices for deployment from Dev /Staging /Production in SharePoint ?

Hi All,
What is a best practices to deploy SharePoint Portal to dev / staging / Production.
I have custom solution deployed using WSP file. But I have done some changes using sharepoint designer.
Like as Designer workflow, master pages etc.
How can I deploy my document libraries and list to dev to prod using best practices?
Thanks
Balaji More

Hi,
According to your post, my understanding is that you wanted to know the best practices to deploy SharePoint Portal in different SharePoint environment.
If the site is not existing in the production server, we can save the site from the development server, and then import it to the production server.
But if the site is already existing in the production server, we should follow these steps to just add the taxonomy and content types to the production server:
Save the site from Dev as a template
Import the template as solution in Visual Studio
Remove unnecessary items from the solution(Please pay more attention on it. If a content type/list... in the solution is existing in the production site too, it will replace the
same object existing in the production after deployment)
Package the solution
Deploy the solution in the production
For more detailed, please see:
http://ahmedmadany.wordpress.com/2012/12/30/importing-sharepoint-solution-package-wsp-into-visual-studio-2010/
There is a similar thread for your reference.
http://social.technet.microsoft.com/Forums/en-US/7dcf61a8-1af2-4f83-a04c-ff6c439e8268/best-practices-guide-for-deploying-sharepoint-2010-from-dev-to-test-to-production?forum=sharepointgeneralprevious
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

BPC Best Practices: Sales Planning (BP2)

Im trying to follow these instructions:
1. Log on to Interface for Excel.
To do so start the SAP BPC Launch Page from your desktop icon or via the Start menu of your desktop, then in the Programs folder choose SAP -> Business Planning and Consolidation.
2. On the SAP BPC Launch Page, choose Interface for Excel. In the dialog box, select the AppSet SAP_BP_Planning and the Application Sales_Planning.
My problem is that in my BPC Launch Page (at step 2) I don't have these options:
AppSet: SAP_BP_Planning
Application: Sales_Planning
These are the options that I have:
AppSet: ApShell (in the combo box)
Application: (nothing in the combo box)
Can anyone figure it out why i dont have those options (SAP_BP_Planning, Sales_Planning) ?
Thanks

The version I have is BPC 7.5 SP4 with SQL Server 2005
Im new at this, I installed this software in a Windows Server 2003 Virtual Machine and now im trying to learn how to use this software. I have downloaded the configuration guide and those steps are there. This is the only one step that i couldn't follow:
3 Prerequisites
Before you start installing this BPC scenario, you must install prerequisite scenarios. For more information, see the BPC prerequisite matrix (Prerequisites_Matrix_[xx]_EN_JP.xls; the placeholder [xx] depends on the SAP Best Practices version you use, for example, BPC refers to the SAP Best Practices SAP BusinessObjects Planning and Consolidation 7.5: Prerequisites_Matrix_BPC_EN_JP.xls). This document can be found on the SAP Best Practices documentation DVD in the folder \BPC_JP\Documentation\.
I couldn't find that file in the Best Practices folder (50101040)
Thanks

Best Practices for patching Exchange 2010 servers.

Hi Team,
Looking for best practices on patching Exchnage Server 2010.
Like precautions , steps and pre and post patching checks.
Thanks.

Are you referring to Exchange updates? If so:
http://technet.microsoft.com/en-us/library/ff637981.aspx
Install the Latest Update Rollup for Exchange 2010
http://technet.microsoft.com/en-us/library/ee861125.aspx
Installing Update Rollups on Database Availability Group Members
Key points:
Apply in role order
CAS, HUB, UM, MBX
If you have CAS roles in an array/load-balanced, they should all have the same SP/RU level. so coordinate the Exchange updates and add/remove nodes as needed so you do not run for an extended time with different Exchange levels in the same array.
All the DAG nodes should be at the same rollup/SP level as well. See the above link on how to accomplish that.
If you are referring to Windows Updates, then I typically follow the same install pattern:
CAS, HUB, UM, MBX
With windows updates however, I tend not to worry about suspending activation on the DAG members rather simply move the active mailbox copies, apply the update and reboot if necessary.

Lync2013 Best Practices Analyzer can not scan the edge server details

Hi All,
I encount one strange question that the Lync 2013 Best Practices Analyzer tool can find there's one edge server in the lync infrastructure when scanning, but the scan result does not display the edge server details as front end server (front end server can
scan all details like hardware CPU, fqdn and so on. But the edge server has not)
Anyone can help, much appreciated.
Elva

It seems a network issue.
You should check you have the proper network access to Lync Edge Server as Lync Edge Server is not in the same subnet of Lync Front End Server.
Lisa Zheng
TechNet Community Support

I found warning after ran Best practice analyser Tools in exchange 2010

Similar Messages

Maybe you are looking for