I get the message you are not authorized to purchase. In the uk I must fist switch to the us

I get the message "I must first switch to us store to purchase  because I'm not authorized to purchase in the uk.  How do I switch?

Change App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3.Tap "View Apple ID"
4. Enter your user name and password.
5. Tap "Country/Region."
6. Tap "Change Country/Region"
7. Select the region where you will be located.
8. Tap "Done".

Similar Messages

  • Getting error message " You are not authorized to access the migration tool "

    One of the users is noticed with error message " You are not authorized to access the migration tool " in SAP Cloud for Customer tenant. thanks

    Hello Raj,
    It seems that this user does not have proper authorization to perform Data Migration.
    You need to go to the WorkCenter View Assignment for this user under his access rights & need to assign him the workcenter "Business Configuration" & under it, also assign him relevant access to Data Migration.
    This shall fix the issue & the user shall not get this error while trying to perform Data Migration.
    Steps:
    1. Go to Workcneter: "Application and User Management => Business Users => Seerach for the suer who gets this error => Edit-> Access Rights => Click on Workcenter view Assignment tab & assign the above mentioned worokcenter access and save."
    Let me know for any further queries.
    BR
    Ankur

  • You are not authorized to purchase from appstore

    When i try to purchase or upgrade apps while in another app i get this message: You are not authorized to purchase from appstore. Why do i get this message? And what can i do about it?

    It says to check something. Check what?
    Enits wrote:
    i already have and got this back:
    Dear Customer,
    It can be caused by parental control, or a cracked OS.
    Please check these.
    Kind regards,
    Dension Support Team
    My iOS is not cracked and i dont have any parental control..

  • While running tcode vn01, getting message you are not authorized

    Hi friends,
    one of the end while running tcode vn01 is getting message you are not authorized to use this function, earlier it was working fine and still it is working fine in quality, so please suggest what might be the problem,
    Regards,
    Tarun

    Dear Friends,
    Thanks a lot for your help, my problem has been resolved.
    let me once again explain you what was the problem and how it got resolved.
    Problem: when user was running tcode vn01, he use to enter the very first screen of vn01 but with pop up that u are not authorized to use this function.
    although he was having the authorization for this tcode.
    Solution: i gave sap_all to the user and after giving sap_all his problem got resolved, so it become confirmed that its only authorization problem
    then i removed sap_all, checked related object of vn01 i.e s_number and its calling snum, i gave the authorization for snum and rnro but still he was facing the same problem
    Then i created new role with only vn01 and assigned to my user id it was working fine, so i assigned the same role to that user but again his problem didn't resolved, then i created the copy of user and started removing roles one by one, other and for the role having vn01 authorization, by doing this problem got resolved and the role which was blocking vn01 to run come into picture, so i thought some tcode might be blocking this but it was not the case the role itself was blocking that tcode because i created the copy of the same role which was blocking vn01 and assinged to user then it was working fine and problem got resolved.
    so what it concluded that might me the profile of that role was not created properly or may be it got corrupted or might be bug in ecc6.0
    Thanks to all friends who contributed for the same.
    i am posting one more question, please help me out in that also
    i

  • When I try to launch terminal, i get an error "You are not authorized to run this applicationThe administrator has set your shell to an illegal value."

    When I try to launch terminal, i get an error "You are not authorized to run this applicationThe administrator has set your shell to an illegal value."

    If you'd asked a question in your original post it might have solicited more pertinent responses. As it is, you were stating a fact. No one knew whether you considered that fact a problem, or what you were hoping to gain by doing so.
    The simple addition of 'can anyone help me fix this so I can run Terminal' would have counted for a lot.
    As it is, your solution is likely to require the Terminal, so you're going to need to fix that one way or another. The simplest would be to create a new admin account (System Preferences -> Users & Groups) then log in using that account.
    Then try and launch the terminal. If that works the problem is specific to your original account and can likely be fixed via some command-line tweaking. I'd start with:
    dscl . read /Users/<username>
    (where <username> is the short name of the account having a problem). This will show the records in the directory data for your account, one of which will be UserShell. Chances are that value is invalid, or missing, and can be corrected via:
    sudo dscl . -change /Users/<username> UserShell <currentValue> /bin/bash
    (where <currentValue) is the current setting for UserShell) which will change the user's shell to /bin/bash (the default).
    Of course, you might already know this and already tried, but since you didn't say so in your original post it's worth checking.

  • You are not authorized to purchase from app store

    I downloaded Virtual City Playground from Mac app store. During playing this game, I want to buy Invest Points，but there always appears  "you are not authorized to purchase from app store"
    Does someone can help me?

    Hi..
    According to the support page for that app...
    I am playing Virtual City Playground on my Mac and I want to buy invest points. When I try to make an in-app purchase, I get a message saying “You are not authorized to purchase from the App Store”. I have checked my App Store account and it works properly. My internet connection is stable. Why I can’t make this purchase? 
    Please be informed that in-app purchases for Mac are available only starting from 10.7.0 (OS X Lion).
    According to your profile, you are running v10.6.8 Snow Leopard.
    http://www.g5e.com/support_mac#VCP
    Always a good idea to check out all the support information on the app developer's website before downloading.

  • I have been unable make a FaceTime call with a 3G connection.  I get s message " You are not connected to wifi.". Does FaceTime only work with wifi?  It happened two different times, when calling a Mac laptop and an iPod which had wifi connections.

    I have been unable to use FaceTime on my iPad2 when I only have a 3G connection.  I get a message saying " You do are not
    connected to wifi."  Does it only work with wifi?

    "I have been unable to use FaceTime on my iPad2 when I only have a 3G connection"
    Correct.
    "I get a message saying " You do are not connected to wifi."  Does it only work with wifi?"
    Yes.

  • I have music in my itunes library that when I try to transfer them to my ipod, a get the message "You are not authorized to play it on this computer"

    How can I identify these songs in my library and either delete or authorize them?

    Have you seen this article related to your issue?
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    B-rock

  • Purchase failed: you are not authorized to purchase pay per view events

    I have been receiving this message for quite some time when trying to order PPV events by remote. I'm still getting this error after having been sent a new DVR unit. For a while I was fine with ordering online or by phone instead. However last time I ordered online it appeared successful however the PPV did not start. When I attempted to call in the order the customer service rep. said they could see the internet order but that they would also place the order in the system and that it should start within half an hour. It never started. Perhaps not being able to order by remote had nothing to do with the failure of the PPV playing after having been ordered online and by phone however I'd still like this to be fixed. I've spent too many hours on the phone. Please advise.

    Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you.Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
    Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe".
    Please keep all correspondence regarding your issue in the private support portal.

  • You are not authorized to display the case component, when using copy

    I copied the standard UDM_SPS_CASE_RECORD and created a Z version with no changes, in addition also copied the standard Case Record model with no changes. I have entered my new case record model into my new element and tied both the to case type. When trying to create a case get a message "You are not authorized to display the case component"
    SU53 looks good, and BASIS did a Trace and did not see anything.
    When I change the configuration back to use the standard no issues and case is created. Anybody know what the issue might be?
    Thanks

    dear friend,
    when you get this error on screen type /NSU53 , hit Enter and get a new screenshot
    if you see the message ""The last  authorization check was successful" that means nothing to do with Basis team, it could be a custom message - talk to abaper ;
    but if you see some objects there (Authorization check failed) - please pass to security or basis guys
    ask / try another user which hasn'rt such error and comare the roles you and he/she has - try to find out the difference
    good luck!

  • You are not authorized to call up line item display (FB03)

    Hi,
    actually; I am facing a problem; one user is getting error message "You are not authorized to call up line item display" when he is trying to view the payment usage of document no in FB03 transaction code.
    I have checked and found that user is already having display access for the company code which he is putting under company code field.
    Also as per the SU53 screen shot; it is showing
    Authorization check failed for S_CTS_ADMI
    Field - CTS_ADMFCT
    for -  TABL
    I have not run the trace yet..
    Kindly advice on what could be the problem and solution for that...
    Many thanks in advance for your help.
    Regards,
    Anuj

    > Also as per the SU53 screen shot; it is showing
    >
    > Authorization check failed for S_CTS_ADMI
    > Field - CTS_ADMFCT
    > for -  TABL
    Total Questions:      8 (6 unresolved)
    Good match! 

  • Warning messages "You are not a receiver of the work item"...

    Hi Experts,
    We are facing an issue in which couple of users are getting warning messages "You are not a receiver of the work item" in there Portal Inbox. But they are not getting any warning message while accessing the same from R/3 inbox. We tried replicating the issue but it is working fine for us. Is it related to workitems which are of any particular type??? Kindly suggest.....
    Just to add some more thing we have gone through the Forum : UWL workitem error: you are not a receiver of the work item and also the OSS notes: 1133821, but we do not get any appropriate solution.
    Please suggest.
    Appreciate your quick response.
    Thanks,
    Harish
    Edited by: harish vyas on May 3, 2010 1:24 PM

    Hi Enrique,
    Yes users are using SSO.
    As suggested I have checked in transaction SU53 and there is no error message for the user i.e. we are getting success message as  "The last authorization check was successful".
    Please suggest what can I try.
    Also adding to this, Warning message which users are getting is not a show stopper i.e. they are able to process workitems successfully.
    Thanks,
    Harish

  • You are not authorized to open the form ORA-01403: no data found

    Hi,
    I have created a new Oracle 10g forms. It compiles sucessfully but when it is opened it gives a error message : You are not authorized to open the form ORA-01403: no data found.
    I am already connected to database. Can anyone please help what is the reason for this issue and any possible resolution?

    Sounds like you have some kind of security enabled.  However, because you didn't share the details about your environment or what you are doing there isn't much we can do is guess.
    Exactly which Forms version are you using?
    Exactly which database version are you using?
    Are you using anything like Oracle E-Business (e.g. template.fmb)?
    Did you create the form with Oracle Designer?
    If you create a simple form using only the DataBlock and Layout Wizards against the Oracle demo schema (SCOTT), does this form run?
    Any additional details outlining what you are doing or have already done might be helpful.

  • You are not authorized to access the function Projects: Worklist. Please co

    Hussein,
    I enabled the multi - org, upgraded R12 from 11i. I try to login into Application, I am getting an error
    You are not authorized to access the function Projects: Worklist. Please contact your System Administrator.
    This could be multi - org issue? Please let me know.
    Thanks
    Prince

    Hi Prince,
    Hussein,
    I enabled the multi - org, upgraded R12 from 11i. I try to login into Application, I am getting an error
    You are not authorized to access the function Projects: Worklist. Please contact your System Administrator.
    This could be multi - org issue? Please let me know.
    Thanks
    PrincePlease check apache log files for details about the error (error_log* and access_log* files).
    Is this happening to all users?
    Did you enable Multi-Org successfully with no errors?
    After Upgrade to 12.1, unable to Login with You are not authorized to access the function Applications Default Login Page [ID 1368800.1]
    You Are Not Authorized To Access This Function When Using Iexpense [ID 295907.1]
    Thanks,
    Hussein

  • "you are not authorized to access the function" issue

    Hi folks,
    I have a issue when I tried to include rich content container in one OA page. I defined the function according to the dev guide. Then the page shows error as "You are not authorized to access the function XXX. Please contact your System Administrator". Now the OA application has Application Short Name as SYSADMIN and Responsibility as SYSTEM_ADMINISTRATOR. And I defined the function under System Administrator->Application->Function. Any suggestion for this issue is appreciated.

    Hi Prince,
    Hussein,
    I enabled the multi - org, upgraded R12 from 11i. I try to login into Application, I am getting an error
    You are not authorized to access the function Projects: Worklist. Please contact your System Administrator.
    This could be multi - org issue? Please let me know.
    Thanks
    PrincePlease check apache log files for details about the error (error_log* and access_log* files).
    Is this happening to all users?
    Did you enable Multi-Org successfully with no errors?
    After Upgrade to 12.1, unable to Login with You are not authorized to access the function Applications Default Login Page [ID 1368800.1]
    You Are Not Authorized To Access This Function When Using Iexpense [ID 295907.1]
    Thanks,
    Hussein

Maybe you are looking for