I Guess I shouldn't Be Emailed!

Hi! I am having a problem, because my "Email Me" button doesn't work on my website! When you run your mouse over the icon, the little hand that points to an object with a link, well... that doesn't come up either. PLEASE help!!!!!!!!!
Thanks.

Did you fill in your email address in the Site Publishing Settings/Contact Email: box?

Similar Messages

  • Well I guess I used the same email for my new iPad mini from my iPod and if I try to buy something I put my right password then it asks me some security questions like what was your first car I don't even have a car! Please help?

    Please please help me!

    You can choose which questions to answer. The answer does not have to have any basis in fact - the critical thing is to REMEMBER WHAT YOU SAID.  If you decide to say your first car was a Bugattii Veyron, that is no problem, as long as you remember to answer Bugatti Veyron if the question is ever asked in the future.

  • How do I add text message to this email with PDF attachment?

    Good day, everyone!
    Okay, we have a "z"-version of program RFFOUS_T and some of its include codes.  One include code, RFFORIO6, has a form called MAIL_PDF_ADVICE.  It is in this form that we are emailing a remittance advice form.  The actual form is attached as a PDF file.
    Unfortunately, there's no text in the body of the email -- it's just the attachment -- so the users would like us to add a couple basic lines in the body of the email that explain the attachment.  I'm pretty new to using this particular FM and emailing the PDF attachment, and I've gotten stuck in my research trying to find out exactly how to do this.  I'm guessing this shouldn't be all that difficult, but I'm not finding the right solution.  Here's the form:
    *&      Form  mail_pdf_advice
          E-mail PDF advice
         -->IT_ADVICE     PDF form (output from Adobe server)
         -->I_PDF_LEN     length of PDF advice in bytes
    FORM mail_pdf_advice USING it_advice   TYPE solix_tab
                               i_pdf_len   TYPE i.
      DATA:
        lt_receivers       TYPE TABLE OF somlreci1 WITH HEADER LINE,
        l_user             LIKE soextreci1-receiver,
        ls_send_doc        LIKE sodocchgi1,
        lt_pdf_attach      TYPE TABLE OF sopcklsti1 WITH HEADER LINE.
      CHECK NOT finaa-intad IS INITIAL.
      CHECK finaa-nacha EQ 'I'.
    *--- determine E-Mail sender and recipient
      IF fsabe-usrnam EQ space.
        l_user = sy-uname.
      ELSE.
        l_user = fsabe-usrnam.         "Office-User des Sachbearb.
      ENDIF.
      lt_receivers-receiver = finaa-intad.
      lt_receivers-rec_type = 'U'.      "E-mail address
      APPEND lt_receivers.
      ls_send_doc-obj_descr =  itcpo-tdtitle.
      lt_pdf_attach-transf_bin = 'X'.
      lt_pdf_attach-doc_type   = 'PDF'.
      lt_pdf_attach-obj_langu  = reguh-zspra.
      lt_pdf_attach-body_start = 1.
      lt_pdf_attach-doc_size   = i_pdf_len.
      DESCRIBE TABLE it_advice LINES lt_pdf_attach-body_num.
      APPEND lt_pdf_attach.
      CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
        EXPORTING
          document_data              = ls_send_doc
          sender_address             = l_user
        TABLES
          packing_list               = lt_pdf_attach
          contents_hex               = it_advice
          receivers                  = lt_receivers
        EXCEPTIONS
          too_many_receivers         = 1
          document_not_sent          = 2
          document_type_not_exist    = 3
          operation_no_authorization = 4
          parameter_error            = 5
          x_error                    = 6
          enqueue_error              = 7
          OTHERS                     = 8.
    <error checking code snipped>
    Does someone know how to do this?  <b><REMOVED BY MODERATOR></b>  Thanks so much in advance!
    Dave
    Message was edited by:
            Alvaro Tejada Galindo

    Hi Dave,
    Table <b>contents_bin</b> is used to pass attachment file and <b>contents_txt</b> is used to pass mail body contents. You need to declare one more int table to give contents for mail body.
    For reference check the code below
    ut_message is for message body
    and ut_attach is having attachement file.
      FORM send_file_as_email_attachment TABLES ut_message
                                              ut_attach
                                        USING uv_email
                                              uv_mtitle
                                              uv_format
                                              uv_filename
                                              uv_attdescription
                                              uv_sender_address
                                              uv_sender_addres_type
                                     CHANGING uc_error
                                              uc_reciever.
      DATA:  l_error                TYPE  sy-subrc,
             l_reciever             TYPE  sy-subrc,
             l_mtitle               LIKE  sodocchgi1-obj_descr,
             l_email                LIKE  somlreci1-receiver,
             l_format               TYPE  so_obj_tp ,
             l_attdescription       TYPE  so_obj_nam ,
             l_attfilename          TYPE  so_obj_des ,
             l_sender_address       LIKE  soextreci1-receiver,
             l_sender_address_type  LIKE  soextreci1-adr_typ,
             l_receiver             LIKE  sy-subrc.
      DATA:   lt_packing_list    LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
              lt_contents        LIKE solisti1   OCCURS 0 WITH HEADER LINE,
              lt_receivers       LIKE somlreci1  OCCURS 0 WITH HEADER LINE,
              lt_attachment      LIKE solisti1   OCCURS 0 WITH HEADER LINE,
              lt_object_header   LIKE solisti1   OCCURS 0 WITH HEADER LINE,
              l_cnt TYPE i,
              l_sent_all(1) TYPE c,
              lw_doc_data LIKE sodocchgi1.
      l_email               = uv_email.
      l_mtitle              = uv_mtitle.
      l_format              = uv_format.
      l_attdescription      = uv_attdescription.
      l_attfilename         = uv_filename.
      l_sender_address      = uv_sender_address.
      l_sender_address_type = uv_sender_addres_type.
    Fill the document data.
      lw_doc_data-doc_size = 1.
    Populate the subject/generic message attributes
      lw_doc_data-obj_langu = sy-langu.
      lw_doc_data-obj_name  = 'SAPRPT'.
      lw_doc_data-obj_descr = l_mtitle.
      lw_doc_data-sensitivty = 'F'.
    Fill the document data and get size of attachment
      CLEAR lw_doc_data.
      READ TABLE ut_attach INDEX l_cnt.
      lw_doc_data-doc_size =
         ( l_cnt - 1 ) * 255 + STRLEN( ut_attach ).
      lw_doc_data-obj_langu  = sy-langu.
      lw_doc_data-obj_name   = 'SAPRPT'.
      lw_doc_data-obj_descr  = l_mtitle.
      lw_doc_data-sensitivty = 'F'.
      CLEAR lt_attachment.
      REFRESH lt_attachment.
      lt_attachment[] = ut_attach[].
    Describe the body of the message
      CLEAR lt_packing_list.
      REFRESH lt_packing_list.
      lt_packing_list-transf_bin = space.
      lt_packing_list-head_start = 1.
      lt_packing_list-head_num = 0.
      lt_packing_list-body_start = 1.
      DESCRIBE TABLE ut_message LINES lt_packing_list-body_num.
      lt_packing_list-doc_type = 'RAW'.
      APPEND lt_packing_list.
    Create attachment notification
      lt_packing_list-transf_bin = 'X'.
      lt_packing_list-head_start = 1.
      lt_packing_list-head_num   = 1.
      lt_packing_list-body_start = 1.
      DESCRIBE TABLE lt_attachment LINES lt_packing_list-body_num.
      lt_packing_list-doc_type   =  l_format.
      lt_packing_list-obj_descr  =  l_attdescription.
      lt_packing_list-obj_name   =  l_attfilename.
      lt_packing_list-doc_size   =  lt_packing_list-body_num * 255.
      APPEND lt_packing_list.
    Add the recipients email address
      CLEAR lt_receivers.
      REFRESH lt_receivers.
      lt_receivers-receiver = l_email.
      lt_receivers-rec_type = 'U'.
      lt_receivers-com_type = 'INT'.
      lt_receivers-notif_del = 'X'.
      lt_receivers-notif_ndel = 'X'.
      APPEND lt_receivers.
      CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
        EXPORTING
          document_data              = lw_doc_data
          put_in_outbox              = 'X'
          commit_work                = 'X'
        IMPORTING
          sent_to_all                = l_sent_all
        TABLES
          packing_list               = lt_packing_list
          contents_bin               = lt_attachment
          contents_txt               = ut_message
          receivers                  = lt_receivers
        EXCEPTIONS
          too_many_receivers         = 1
          document_not_sent          = 2
          document_type_not_exist    = 3
          operation_no_authorization = 4
          parameter_error            = 5
          x_error                    = 6
          enqueue_error              = 7
          OTHERS                     = 8.
    Message was edited by:
            Amit Kumar

  • I deleted some architectures that i shouldn't have...

    i am ashamed.
    i ran monolingual (http://monolingual.sourceforge.net/) to save some disk space, and ended up deleting some of the architectures that i guess i shouldn't have done. now photoshop, flash, dreamweaver and freehand won't run.
    is there a way to recover these things without using the 'delete and reinstall' function on the install disks? i don't want to lose all my files (20GB of music).

    You may be able to repair this with the 10.4.9 Combo Updater.
    EDIT: Sorry for that you are running 10.4.8 which would be this update.
    This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before. It has worked well for many.
    Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
    -mj
    [email protected]
    Message was edited by: macjack

  • BlackBerry PIN guessing

    I received a suspicious long email-like message as a "PIN Peer-to-Peer" this morning. It is written in a language I don't understand (Indonesian of some kind) and has RIM branding all over it.
    I don't know how they could have got my PIN as I never post it anywhere, so I'm wondering if anyone else got a similar message. Could it be that someone has a script that just tries guessing PINs? It wouldn't be that hard to write one, I guess, but shouldn't BlackBerry security stop the message from being sent?

    It happens. Rarely, from what I can tell. I don't know exactly how it is done, but I think it is as you say. Can't say either way if BlackBerry could block it. My advice is ignore it if it is indeed a rare occurrence.
    - Ira

  • Mail Inbox all Emails do not display sender's name or E-mail address

    After the last update in my Mail all the sender's names or E-mail addresses changed into No Sender. They are real E-mails not spam or junk E-mails. Once I open the E-mail I can see the Sender's name and E-mail address. It is very inconvenient not being able to see who is the sender befoer openning it. How do i fix this?
    Thank you.

    I am fighting with the same problem. In conversation mode my reply shows me as "From" on the left pane. I switched to Classic view which makes life a bit easier as I can see the "Subject" line and guess that this is an email I'm searching for. Can't find the way to put name of the Sender who started conversation in the info summary on the left.

  • TS3899 Can two people have the same email address and password on their phone?

    Can two people have the same email address and password on their phone?

    I guess so.    But the email content will mirror on both phones.
    If you are talking about your Apple ID and iCloud email, yes, it is possible, but again the phones will mirror.   You should not have the same Apple ID and iCloud both.  
    Why?
    If you explain the reason for the question we may have a solution that works for you.

  • Mac Mail is constantly forwarding same email to my BB 8120.

    I'm suffering an annoying problem whenever I type a new email using my Mac Mail (Version 3.3).
    As I compose a new email I'm constantly bombarded by new message alerts on my Blackberry 8120 of the actual email I'm writing. It is sending multiple alerts even as I am still writing the same message.
    So for example I'll open Mac Mail and type in the subject box, cue an alert on my phone notifying me of a new message. This "new" message is actually the email I'm still writing on the Mac Mail. I'll carry on typing the email and yet again I will be notified on my phone of a new message.... and yes you guessed it, it's the email I'm still composing, only now it contains the subject and the few words that I have typed, and so this carries on.... and on.
    It seems that if I don't type it does not send anything, but the moment I type several words, beep! I have a new message. Typically I'll end up with five message alerts each showing various stages of my email.
    As you might expect It's beginning to really grate me.
    If anybody can help me I would be very grateful.
    Kind Regards
    Richard001 

    But this is just a workaround solution. I am basically loosing the ablity to save my draft mail to the server and may  later send it from my office or any other place where i dont have my macbook with me. 
    This doesnt happen when i save draft from the web-gmail or with microsoft euntroge (I havent checked whether euntroge puts the draft message on the server ). 
    I use a gmail account. Have anyone of you found issues with any other email account?
    -Arun

  • Creating a mailto: hyperlink when the email has a dot before the at ( @) sign

    Hello,
    I have a FM 7.2 document that includes an email with a dot in the first part:
    [email protected]
    When I distill the file and afterwards create the PDF the result is that the mailto includes only the part of the name that is after the dot [[email protected]] --what can I do to fix this? I have to be sure that I'm getting working email hyperlinks in the PDF of the email address in its entirety.
    If it matters any, the OS is XP Pro.
    Hope somebody can provide advice asap!
    MTIA,
    Donna

    Here is my guess: The "message URL mailto:[email protected]" hypertext marker is either not present in your FM file or is not processed by FrameMaker (which could happen if the syntax is incorrect, the marker type is not hypertext or Acrobat Data is turned off). And you are using Acrobat or Reader 7 to display the PDF.
    Starting with Acrobat and Reader 7, there is a preference of "Automatically detect URLs from text" (Edit > Preferences, General; in version 8 it's called "Create Links from URLs"). When this is enabled (default), e-mail and web addresses present in the text are interpreted as links when the PDF is displayed (without any links defined in the authoring program). Acrobat 7.x interpretation of e-mail addresses is incorrect -- the presence of a dot, an underscores or a hyphen disturbs the address (so, as in your case, [email protected] is interpreted as [email protected]).
    This was fixed in Acrobat/Reader 8, so if you display the same PDF in that environment the interpreted link will be OK. Nevertheless, I recommend adding/checking the hypertext link in FrameMaker, so that a "real" e-mail link will work as expected with all versions of Acrobat/Reader.
    Shlomo Perets
    MicroType, http://www.microtype.com * ToolbarPlus Express for FrameMaker
    FrameMaker/Acrobat training & consulting * FrameMaker-to-Acrobat TimeSavers/Assistants

  • Won't receive Confirmation Email for iStore

    Today i bought the super cool iPod Touch, and ofcours i registered a new account for the iStore. But when i want to download and install a free application, it says i did not verify my account! So i checked my email and guess what? No verification email! What now? I checked my email address twice for if i typed it good.. And all seems fine. What now?

    That's weird. I got the email, but when I did, I clicked on the link to verify but it's still telling me it's not verified so I still can't access the app store, even though i've verified it several times. Help would be appreciated, especially since the hotline isn't open because its christmas.

  • SSRS report email Scheduling omit zero record

    Is that a way to omit zero record for SSRS report email scheduling?
    That means if zero record happened it shouldn't trigger emailing.

    Hi SAMSUNG TECH,
    Per my understanding that you don't want to send the scheduled email subscription if the report have no data, right?
    I have tested on my local enviroment that you can modify the commend in the job step include some condition to send the email or not.
    Detials information in below for you reference:
    Open SQL Server Management Studio (SSMS) to connect to Database Engine ->expand SQL Server Agent->expand Jobs, double-click the Job.
    you can use query below to find the Subscription you have just created and the “ScheduleID” in the table is equal to the Jobs Name.
    use ReportServer;
    SELECT USR.UserName AS SubscriptionOwner
    ,SCH.ScheduleID
    ,SCH.NextRunTime
    ,SCH.LastRunTime
    ,SCH.EndDate
    ,SCH.EventData
    ,SUB.EventType
    ,SUB.SubscriptionID
    ,SUB.ModifiedDate
    ,SUB.[Description]
    ,SUB.DeliveryExtension
    ,SCH.Name AS ScheduleName
    ,CAT.[Path] AS ReportPath
    ,CAT.[Description] AS ReportDescription
    FROM dbo.Subscriptions AS SUB
    INNER JOIN dbo.Users AS USR
    ON SUB.OwnerID = USR.UserID
    INNER JOIN dbo.[Catalog] AS CAT
    ON SUB.Report_OID = CAT.ItemID
    INNER JOIN dbo.ReportSchedule AS RS
    ON SUB.Report_OID = RS.ReportID
    AND SUB.SubscriptionID = RS.SubscriptionID
    INNER JOIN dbo.Schedule AS SCH
    ON RS.ScheduleID = SCH.ScheduleID
    ORDER BY USR.UserName
    ,CAT.[Path]
    2.  Select "Steps" on the left pane on the Job Properties window.
    3.  Click Edit button in the bottom of the window and then change the command
    Existing command is:
    EXEC [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='9be28f07-3784-4070-802a-b7ca0aec4c7c'
    Change the command as below: (Remember to check the Database Name and table name):
    If exists
    (Select top 1 * from [DBName].TableName )
    EXEC   [ReportServer].dbo.AddEvent @EventType='TimedSubscription',   @EventData='9be28f07-3784-4070-802a-b7ca0aec4c7c'
    BEGIN
    END
    Note: Change the @EventType and @EventData to the values in your job,the value of this two fields can be found by execute the query in step1.
    More details information in below articles:
    http://www.jasonyousef.com/2012/02/dont-send-that-empty-ssrs-report.html
    http://blogs.msdn.com/b/bimusings/archive/2005/07/29/445080.aspx
    If you still have any question, please feel free to ask.
    Regards
    Vicky Liu

  • Email Deletes After iTunes Sync, WHY!!?? 3GS OS 3.1.3

    Why does my email in my POP3 account inbox delete after/during sync with iTunes?

    It shouldn't. Email account mailboxes and messages are not included with the iTunes sync process.
    Do you have the email account selected under the Info tab for your iPhone sync preferences with iTunes to transfer the email account settings from your computer to your iPhone? If so, this only needs to be done once and can be deselected after the email account settings are successfully transferred to your iPhone.
    If selected, deselect this followed by selecting apply to see if this makes any difference.

  • C3 wont sync email / facebook data automatically

    Hi,
    I'm wondering if anyone else is facing the same problem...
    Mail syncs fine when I initiate it manually; whereas the box, the net & my operator state that my phone is supposed to have push mail.
    My Facebook account does not automatically sync & display updates on my home screen widget either. Again, if I hit refresh from options in the home screen , it syncs then.
    The settings that I use are:
    Mail:
    When roaming: follow my account settings
    show 2 lines per message: on
    delete confirmation: on
    download confirmation: on
    per account settings (I have 3):
    update my inbox: very fast
    alert me for new mails: on
    alert me only during:12:00am to 12:00am (tried many combos here; none worked)
    insert signature: on
    Communities (FB):
    Roaming: dont change anything
    minimise data use: off
    confirm before deleting: on
    automatically update my phone home screen: 00:00 to 00:00 (I have played around with this a lot, but.. )
    please... any help on this would be greatly appreciated..
    thanks..
    Nokia E71, E72
    Solved!
    Go to Solution.

    hey.. i somehow got it to work..
    I backed up all my data onto my memory card & reset the phone (*#7370#).
    the phone restarted & it detected my sim as new.. the phone automatically downloaded sprs settings from my operator (vodafone/mumbai/india).
    and presto!! I did not change anything at all.. email / chat / FB, et al / everything worked..
    if everything is fine, after u st up email, the E or G icon (Edge/GPRS-depending on operator and network coverage) on the top bar of you display should be in a square...
    just ensure you have a fairly decent data plan n you are good to go.
    i must also tell you that this is not really push email; takes at least 5-10 minutes for an email to be pushed to my phone. I'm guessing the app checks for email in the same interval.
    overall a good phone (now that I have everything up n workin )
    Nokia E71, E72

  • Standby screen email notification

    Hello everyone, this is my first post on this forum. I've been visiting the forum for years and found answers to all my queries and fixed all my problems.
    I'll make an admission before I pose my question, I used to own a P990i... it's now gathering dust as I replaced it with my fantastic n95.
    Anyway, my question. I like the standby screen on s60v3. Quick and easy access to 6 apps and a view of upcoming appointments, tasks and to-do's. I saw a picture of another nokia s60v3 standby screen and it showed 2 emails also. I've never made my n95 do this - how do you display received emails on the home screen??
    I don't like it when there are features that I don't know how to use !!
    thanks in advance.

    Erm this is a guess try this, if you go to messenging, then click on the email account you have created, then press options, then email settings,then user settings, then make sure new email alerts is on. Btw this is just a guess, I dont use the email function that much as I just tend to use the browser to look at my webmail instead as its more graphical.

  • Exchange: receives email but not cal events?

    I set up an Exchange email account on my iPhone. It receives email fine (when logged into my corporate VPN) but does not receive Outlook calendar events. Can anyone else confirm this behavior? Is there a fix?
    It seems strange that the iPhone Mail client would selectively filter out the meeting notices. The Mail app on OS X receives the Outlook meeting notices fine (with basically the same Mail account setup).

    Thanks, Jose. But I am not "syncing" my iPhone calendar. I am simply downloading emails from the Exchange server (I guess I'm technically syncing emails to the server). And as far as I understand, the Outlook meeting notices are simply emails with attachments. This is why I don't understand why the meeting notices aren't showing up.
    I don't expect these Outlook meetings to show up in the iPhone calendar (unless I sync with a host computer). But I do want the iPhone Mail client to show me the emails that contain these calendar events.

Maybe you are looking for