I had difficulties in understanding the above code .
If i mention like this :
With respect to QueueRecievier.recieve(1000);
Will the QueueRecievier would wait 10 secs in interval for recieving each Message ??
JMS with respect to QueueRecievier.recieve
Anybody Please help.
Edited by: kiran7881 on Mar 21, 2009 9:11 AM
bkyadav wrote:
at certain point of time in porgram
(x++) should be treated as x = x+1; but that is not happening.Here's the rule : you have to proceed the expression from left to right.
For example :
int x = 8;
x = x + ++x; // x = 8 + 9 = 17
int x = 8;
x = x + x++; // x = 8 + 8 = 16
int x = 8;
x = x + --x; // x = 8 + 7 = 15Also, in the for statement of your example :
for(int i=0;i<3;i++)the value of i+ is first tested before being incremented for the next iteration otherwise the test on value of i+ = 0 would have been skipped.
Similar Messages
-
SSIS Error Text was truncated or one or more characters had no match in the target code page
I the same issue or something close.
Except I have one Field (27) that get a trunacation error
Error:
Data conversion failed. The data conversion for column "Column 27" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
The "output column "Column 27" (91)" failed because truncation occurred, and the truncation row disposition on "output column "Column 27" (91)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
Data looks like:Red Text is the field that is throwing the error!
00000412,
0000000011411001,
0273508793,
01,
"RUTH ",
"EDWARDS ",
19500415,20080401,
"N",
04488013,
"1",
"F",
365094,
20080401,
000472162716,
"1447203880 ",
43995202341210,
00120.000,
0010,
00008.26,
00004.96,
000.00,
00002.70,
00007.66,
0,
"PROMETH/COD SYP 6.25-10 ",
"Y",
"Promethazine w/ Codeine Syrup 6.25-10 MG/5ML ",
0000,
"001C",
610020,"WELLP1537",
"O",
"N",
00,
"D",
"S",
"G",
"ID01V012008782",
"TOM AHL CHRYSLER ",
"M",
"M",
"PBD $20/10+40%/20% ",
00008.26,
"1184641367"I have found four things that I always check when I run into this problem. I have yet to find a time when one of these didn't work (specifically helps when reading data from flat files but I suppose most of the four would apply to any source). Check out my blog post, content repeated below:
1. Make sure to properly configure the "Flat File Source". When setting the connection properties to the flat file, take time to click on the advanced tab and ensure that the" Name", "DataType", and "OutputColumnWidth" properties are set properly. I have found that if this is setup correctly when the initial connection is created, some if not all of the data type issues and errors can be alleviated. The "Flat File Connection Manager Editor" can be accessed while initially creating the connection or by double clicking on a flat file connection within the "Connection Managers" for connections that have previously been created.
2. Depending on the order and steps that were used to create the connection to the flat file, sometimes the data types need to be updated in an additional area. This can be found by right clicking on the "Flat File Source" and selecting "Show Advanced Editor...". Once in the advanced editor, click on the "Input and Output Properties" tab. Expand the "External Columns" folder. For each field being loaded from the flat file there are some configurable properties. Make sure that the "DataType" field is properly set for each field.
3. Something else that can be done if you are sure that the data type is set correctly in both of the two previously mentioned locations is to set the "Flat File Source" to essentially ignore those annoying truncation errors. On the same "Input and Output Properties" tab, expand the "Output Columns" folder. For those fields listed, there is a "TruncationRowDisposition" property. By default this is set to "RD_FailComponent". This can be switched to "RD_IgnoreFailure" in order to allow the data to successfully pass through the "Flat File Source" even if SSIS believes that truncation is going to occur. Along with making this change, you can also check the "DataType" in the "Output Columns" as well.
Caution: If you do set the "Flat File Source" to "RD_IgnoreFailure" as mentioned above, always take time to review the data loaded in the target table to ensure that the integrity of the data was not jeopardized.
Note: I have found that when the "DataType" for both the "External Columns" and "Output Columns" is manually updated that it does not remain the same when the advanced editor is reopened. For this reason, try Steps 1 and 2 before setting the "Output Columns" manually.
4. The last thing to try, and this applies specifically to loading data from Excel files as opposed to text or CSV is to set the package to run in 32-bit mode. Click on "Project" on the top menu and select "Data Imports Properties...". Click on "Debugging" under the "Configuration Properties" and set the "Run64BitRuntime" to "False".
Working with data from flat files can sometimes be difficult in SSIS. By using one or many of the approaches I have listed above you should be able to create a repeatable process that is frequently needed within most SSIS packages. Be very careful when setting data types within SSIS and make sure to do it upfront when necessary because it can be harder to debug later in the development process. If the proper changes are made it should not be a surprise to feel a big SSIS developer sense of relief when the screen shows all green.
Let me know if this works!
Check out my blog! -
SSIS - "Text was truncated or one or more characters had no match in the target code page"
Hello everyone,
SQL server 2012, SSIS package, we are getting the following error for some of the mapped columns,
"Text was truncated or one or more characters had no match in the target code page."
We're fetching the data from CSV file and dumping that to staging table i.e. SQL server 2012.
Can anybody please advise how to resolve this error/problem? It's urgent.
Any help would be much appreciated.
Thanks, <b>Ankit Shah</b> <hr> Inkey Solutions, India. <hr> Microsoft Certified Business Management Solutions Professionals <hr> http://ankit.inkeysolutions.comYou can enable data viewer (Right click on data flow connector --> Enable Data Viewer) before loading records to find out what's going on. Also, Configure error output to re-direct rows, so you can analyse data type and length.
Also, try this:
Ultimately, in the Advanced Editor of the source datafile, on the Input and Output Properties tab, under External Columns, there is a
Length property that defaults to 50. Changing that to match the Target Database File did the trick. [Source]
Check this links: Add a Data Viewer to a Data Flow
web: www.ronnierahman.com -
Help needed in understanding the Java code.
Hi All,
I have recently started learning the Java language. I came across this example and had a problem in understanding the output of the program. I could follow that if the continue statement is present in the below program the output is "Found 9 p's in the string" . But if the continue statement is removed I could not understand why the output would be "Found 35 p's in the string" .Is it because of the spaces and characters other than p... (eter ier icked a eck of ickled eers)
Example-----------------------
The continue statement skips the current iteration of a for, while , or do-while loop. The unlabeled form skips to the end of the innermost loop's body and evaluates the boolean expression that controls the loop. The following program, ContinueDemo , steps through a String, counting the occurences of the letter "p". If the current character is not a p, the continue statement skips the rest of the loop and proceeds to the next character. If it is a "p", the program increments the letter count.
class ContinueDemo {
public static void main(String[] args) {
String searchMe
= "peter piper picked a " +
"peck of pickled peppers";
int max = searchMe.length();
int numPs = 0;
for (int i = 0; i < max; i++) {
// interested only in p's
if (searchMe.charAt(i) != 'p')
continue;
// process p's
numPs++;
System.out.println("Found " +
numPs + " p's in the string.");
Here is the output of this program:
Found 9 p's in the string.
To see this effect more clearly, try removing the continue statement and recompiling. When you run the program again, the count will be wrong, saying that it found 35 p's instead of 9.The answer is already in your example - "The unlabeled form skips to the end of the innermost loop's body and evaluates the boolean expression that controls the loop."
It unloads the current loop iteration when condition is matching. Loop is again starting from boolean expression inside loop declaration.
Java Programming - java forum -
Please help me in understanding the following code.
public static void main(String args[]){
int x=0,c=0;
for(int i=0;i<3;i++)
x = x + x++;
System.out.println(x);
why this program always prints zero(0) as output. I am not able to understand the execution sequence of it.bkyadav wrote:
at certain point of time in porgram
(x++) should be treated as x = x+1; but that is not happening.Here's the rule : you have to proceed the expression from left to right.
For example :
int x = 8;
x = x + ++x; // x = 8 + 9 = 17
int x = 8;
x = x + x++; // x = 8 + 8 = 16
int x = 8;
x = x + --x; // x = 8 + 7 = 15Also, in the for statement of your example :
for(int i=0;i<3;i++)the value of i+ is first tested before being incremented for the next iteration otherwise the test on value of i+ = 0 would have been skipped. -
Plz meke me understand the given code!!!!!!
Dear All,
I am giving you the code below. Please any one can explain me the whole program and the purpose. specially form LOOP section to the end of the program.
I will be very kind if someone will help to make me understood.
Regards,
Abhay.
TABLES:bseg.
DATA: it_bseg LIKE bseg OCCURS 0 WITH HEADER LINE.
DATA: it_zseco LIKE zseco OCCURS 0 WITH HEADER LINE.
*DATA: it_zseco TYPE zseco OCCURS 0 WITH HEADER LINE.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:s_bukrs FOR bseg-bukrs,
s_gjahr FOR bseg-gjahr,
s_belnr FOR bseg-belnr.
SELECTION-SCREEN END OF BLOCK b1.
START-OF-SELECTION.
PERFORM get_data.
*& Form get_data
FORM get_data .
SELECT *
FROM bseg INTO TABLE it_bseg
WHERE belnr IN s_belnr AND
bukrs IN s_bukrs AND
gjahr IN s_gjahr.
IF sy-subrc = 0.
LOOP AT it_bseg .
MOVE-CORRESPONDING it_bseg TO it_zseco.
it_zseco-bupla_old = it_bseg-bupla.
it_zseco-zdate = sy-datum.
it_zseco-usernam = sy-uname.
it_zseco-ztime = sy-uzeit.
IF it_bseg-bupla NE 'B001'.
it_bseg-bupla = 'B001'.
MODIFY it_bseg.
ENDIF.
it_zseco-bupla_new = 'B001'.
APPEND it_zseco.
CLEAR it_zseco.
ENDLOOP.
MODIFY bseg FROM TABLE it_bseg.
MODIFY zseco FROM TABLE it_zseco.
MESSAGE i000 WITH 'tables BSEG & ZSECO updated successfully'.
ELSE.
MESSAGE i000 WITH 'No data found'.
ENDIF.Selection screen with fields for company code, fiscal year and document number.
Extract all entries matching this selection criteria from table BSEG (document line items) into an internal table.
Populate an internal table it_zseco with each document extracted and the current user/date/time.
Sets the value of field bupla in BSEG to B001 if it does not currently have this value.
Updates these changes to table BSEG.
Updates the audit into to table ZSECO.
Why it's doing this (in this rather shabby way) I don't know.
Regards,
Nick -
How to understand this strange code?
Hi,everyone
When I analysing the petstore source code ,I find it very difficult to understand the following code,who can help me?please send email to [email protected]
thank you!
public XMLFilter setup(XMLReader reader) throws PopulateException {
return new XMLDBHandler(reader, rootTag, XML_INVENTORY) {
public void update() throws PopulateException {}
public void create() throws PopulateException {
createInventory(getValue(XML_ID), getValue(XML_QUANTITY, 0));
return;
}This function is returning an anonymous class.
This new class is constructed and defined on the fly in this code. -
Help needed in understanding the code.
Hi All,
I am just trying to understand the Java code in one Self Serice page. However, I am having tough in understanding the CO code. In the prosessRequest class, I have the below code.
oapagecontext.putTransactionValue("AddAssignmentInsertRowFlag", "N");
oaapplicationmodule.getTransaction().commit();
As soon as, oaapplicationmodule.getTransaction().commit();
gets executed, its calling some other class. Not sure what is being called, but i can see the log messages that its executing some other class which actually does the calls to DB APIs and inserting data into main tables.
Can you please explain me what is being called to make DB API calls. I would greatly appreciate your help.
Thanks in Advance!
- Rani
****************************Here is the full code of class for your reference****************************
public void processFormRequest(OAPageContext oapagecontext, OAWebBean oawebbean)
if("SelectedResourceLink".equals(oapagecontext.getParameter("event")))
Debug.log(oapagecontext, this, "SelectedResourceLink has been pressed", 3);
oapagecontext.redirectImmediately("OA.jsp?akRegionCode=PA_SELECTED_RESOURCES_LAYOUT&akRegionApplicationId=275", true, "RP");
String s = (String)oapagecontext.getTransactionValue("AssignmentType");
super.processFormRequest(oapagecontext, oawebbean);
Debug.log(oapagecontext, this, "in processFormRequest()", 3);
OAApplicationModule oaapplicationmodule = oapagecontext.getRootApplicationModule();
if(!"Y".equals(oapagecontext.getParameter("paMass")))
String s1 = oapagecontext.getParameter("event");
if("lovUpdate".equals(s1))
Debug.log(oapagecontext, this, "*** User Selected a value from LOV ***", 3);
String s3 = oapagecontext.getParameter("source");
Debug.log(oapagecontext, this, "*** lovInputSourceId = " + s3 + " ***", 3);
if("ProjectNumber".equals(s3) && "Project".equals(s))
Hashtable hashtable = oapagecontext.getLovResultsFromSession(s3);
String s10 = (String)hashtable.get("ProjectId");
Debug.log(oapagecontext, this, "*** ProjectId ***" + s10, 3);
oapagecontext.putTransactionValue("paProjectId", s10);
if("Project".equals(s))
Debug.log(oapagecontext, this, "*** Setting default value for Delivery assignment ***", 3);
oaapplicationmodule.invokeMethod("defaultProjectAttrs");
if("RoleName".equals(s3))
Hashtable hashtable1 = oapagecontext.getLovResultsFromSession(s3);
Debug.log(oapagecontext, this, "*** RoleName Hashtable Contents ***" + hashtable1.toString(), 3);
String s11 = (String)hashtable1.get("RoleId");
Debug.log(oapagecontext, this, "*** RoleId ***" + s11, 3);
Debug.log(oapagecontext, this, "*** AssignmentType = " + s + "***", 3);
if("Open".equals(s))
Debug.log(oapagecontext, this, "*** Calling defaultJobAttrs for Open Assignment***", 3);
Serializable aserializable[] = {
s11
oaapplicationmodule.invokeMethod("defaultJobAttrs", aserializable);
if("Template".equals(s) || "Open".equals(s))
Debug.log(oapagecontext, this, "*** Defaulting Competencies ***" + s11, 3);
OAViewObject oaviewobject = (OAViewObject)oapagecontext.getApplicationModule(oawebbean).findViewObject("RoleCompetenciesVO");
oaviewobject.setMaxFetchSize(-1);
oaviewobject.setWhereClauseParam(0, s11);
oaviewobject.executeQuery();
Debug.log(oapagecontext, this, "*** End LOV event ***", 3);
String s4 = "";
String s8 = "";
OASubTabLayoutBean oasubtablayoutbean1 = (OASubTabLayoutBean)oawebbean.findIndexedChildRecursive("AddAssignmentSubTabLayout");
if("Project".equals(s) && !oasubtablayoutbean1.isSubTabClicked(oapagecontext))
OAViewObject oaviewobject1 = (OAViewObject)oapagecontext.getApplicationModule(oawebbean).findViewObject("AddNewAssignmentVO");
s4 = (String)oaviewobject1.first().getAttribute("ProjectId");
s8 = (String)oaviewobject1.first().getAttribute("ProjectNumber");
Debug.log(oapagecontext, this, "*** lProjectId = " + s4, 3);
Debug.log(oapagecontext, this, "*** lProjectNumber = " + s8, 3);
if("Project".equals(s) && !oasubtablayoutbean1.isSubTabClicked(oapagecontext) && !StringUtils.isNullOrEmpty(s8))
Debug.log(oapagecontext, this, "Delivery Assignment, Project Number is there but no Project Id", 3);
if(s4 == null || s4.equals(""))
ViewObject viewobject = oapagecontext.getApplicationModule(oawebbean).findViewObject("ObtainProjectId");
if(viewobject == null)
String s14 = "SELECT project_id FROM PA_PROJECTS_ALL WHERE segment1 =:1";
viewobject = oaapplicationmodule.createViewObjectFromQueryStmt("ObtainProjectId", s14);
viewobject.setWhereClauseParam(0, s8);
viewobject.executeQuery();
int j = viewobject.getRowCount();
if(j != 1)
Debug.log(oapagecontext, this, "Error : Project Number is Invalid or not unique", 3);
OAException oaexception4 = null;
oaexception4 = new OAException("PA", "PA_PROJECT_NUMBER_INVALID");
oaexception4.setApplicationModule(oaapplicationmodule);
throw oaexception4;
oracle.jbo.Row row = viewobject.last();
if(row != null)
Object obj2 = row.getAttribute(0);
if(obj2 != null)
s4 = obj2.toString();
if(s4 != null)
oapagecontext.putTransactionValue("paProjectId", s4);
if(oaapplicationmodule.findViewObject("AddNewAssignmentsVO") != null)
oaapplicationmodule.findViewObject("AddNewAssignmentVO").first().setAttribute("ProjectId", s4);
} else
Debug.log(oapagecontext, this, "Error : No rows returned in Project Number query", 3);
OAException oaexception5 = null;
oaexception5 = new OAException("PA", "PA_PROJECT_NUMBER_INVALID");
oaexception5.setApplicationModule(oaapplicationmodule);
throw oaexception5;
String s12 = "F";
if(s4 != null && !s4.equals(""))
String s13 = Security.checkUserPrivilege("PA_ASN_CR_AND_DL", "PA_PROJECTS", s4, oapagecontext, false);
if("F".equals(s13))
OAException oaexception3 = null;
oaexception3 = new OAException("PA", "PA_ADD_DELIVERY_ASMT_SECURITY");
oaexception3.setApplicationModule(oaapplicationmodule);
Debug.log(oapagecontext, this, "ERROR:" + oaexception3.getMessage(), 3);
throw oaexception3;
OAViewObject oaviewobject2 = (OAViewObject)oapagecontext.getApplicationModule(oawebbean).findViewObject("AddNewAssignmentVO");
Object obj = oaviewobject2.first().getAttribute("BillRateOverride");
Object obj1 = oaviewobject2.first().getAttribute("BillRateCurrOverride");
Object obj3 = oaviewobject2.first().getAttribute("MarkupPercentOverride");
Object obj4 = oaviewobject2.first().getAttribute("DiscountPercentOverride");
Object obj5 = oaviewobject2.first().getAttribute("TpRateOverride");
Object obj6 = oaviewobject2.first().getAttribute("TpCurrencyOverride");
Object obj7 = oaviewobject2.first().getAttribute("TpCalcBaseCodeOverride");
Object obj8 = oaviewobject2.first().getAttribute("TpPercentAppliedOverride");
Object obj9 = null;
Object obj10 = null;
Debug.log(oapagecontext, this, "in AddAssignmentsTopCO processFcstInfoRg(): getting the implementation options", 3);
Object obj11 = oaviewobject2.first().getAttribute("BrRateDiscReasonCode");
Object obj12 = oapagecontext.getTransactionValue("rateDiscReasonFlag");
Object obj13 = oapagecontext.getTransactionValue("brOverrideFlag");
Object obj14 = oapagecontext.getTransactionValue("brDiscountOverrideFlag");
String s22 = oapagecontext.getParameter("BillRateRadioGroup");
if("BRCurrencyRadioButton".equals(s22))
Debug.log(oapagecontext, this, "BRCurrencyRadioButton chosen", 3);
if(obj == null || obj1 == null)
Debug.log(oapagecontext, this, "error", 3);
OAException oaexception6 = new OAException("PA", "PA_CURR_BILL_RATE_REQUIRED");
oaexception6.setApplicationModule(oaapplicationmodule);
throw oaexception6;
} else
if("BRMarkupRadioButton".equals(s22))
Debug.log(oapagecontext, this, "BRMarkup%RadioButton chosen", 3);
if(obj3 == null)
Debug.log(oapagecontext, this, "error", 3);
OAException oaexception7 = new OAException("PA", "PA_MARKUP_PERCENT_REQUIRED");
oaexception7.setApplicationModule(oaapplicationmodule);
throw oaexception7;
} else
if("BRDiscountRadioButton".equals(s22))
Debug.log(oapagecontext, this, "BRDiscount%RadioButton chosen", 3);
if(obj4 == null)
Debug.log(oapagecontext, this, "error", 3);
OAException oaexception8 = new OAException(oapagecontext.getMessage("PA", "PA_DISCOUNT_PERCENT_REQUIRED", null));
oaexception8.setApplicationModule(oaapplicationmodule);
throw oaexception8;
if("Y".equals(oapagecontext.getTransactionValue("paMass")) || "Admin".equals(s) || "Template".equals(s))
Debug.log(oapagecontext, this, "Need not have this check for team templates ", 3);
} else
if(obj13 != null && obj13.equals("Y") && obj12 != null && obj12.equals("Y") && "BRCurrencyRadioButton".equals(s22) && StringUtils.isNullOrEmpty((String)obj11))
Debug.log(oapagecontext, this, "error 1", 3);
OAException oaexception9 = new OAException("PA", "PA_RATE_DISC_REASON_REQUIRED");
oaexception9.setApplicationModule(oaapplicationmodule);
throw oaexception9;
if(obj14 != null && obj14.equals("Y") && obj12 != null && obj12.equals("Y") && "BRDiscountRadioButton".equals(s22) && StringUtils.isNullOrEmpty((String)obj11))
Debug.log(oapagecontext, this, "error 2", 3);
OAException oaexception10 = new OAException("PA", "PA_RATE_DISC_REASON_REQUIRED");
oaexception10.setApplicationModule(oaapplicationmodule);
throw oaexception10;
Debug.log(oapagecontext, this, "*** Selected transfer price radio shr = " + s22, 3);
oapagecontext.putTransactionValue("BROGroupSelected", s22);
Debug.log(oapagecontext, this, "*** 1 :Selected bill rate radio = " + s22, 3);
if(s22 != null)
oapagecontext.putSessionValue("BROGroupSelected", s22);
s22 = oapagecontext.getParameter("TransferPriceRadioGroup");
Debug.log(oapagecontext, this, "*** Selected transfer price radio = " + s22, 3);
if("TPCurrencyRadioButton".equals(s22))
Debug.log(oapagecontext, this, "***TPCurrencyRadioButton chosen", 3);
if(obj5 == null || obj6 == null)
Debug.log(oapagecontext, this, "error", 3);
OAException oaexception11 = new OAException("PA", "PA_CURR_RATE_REQUIRED");
oaexception11.setApplicationModule(oaapplicationmodule);
throw oaexception11;
} else
if("TPBasisRadioButton".equals(s22))
Debug.log(oapagecontext, this, "***TPBasisRadioButton chosen", 3);
if(obj7 == null || obj8 == null)
Debug.log(oapagecontext, this, "error", 3);
OAException oaexception12 = new OAException("PA", "PA_BASIS_APPLY_PERCENT_REQD");
oaexception12.setApplicationModule(oaapplicationmodule);
throw oaexception12;
oapagecontext.putTransactionValue("TPORadioGroupSelected", s22);
if(oaapplicationmodule.findViewObject("AddNewAssignmentVO").first().getAttribute("RoleId") != null)
Debug.log(oapagecontext, this, "*** Role Id is + " + oaapplicationmodule.findViewObject("AddNewAssignmentVO").first().getAttribute("RoleId"), 3);
if(oapagecontext.getParameter("SearchCompetencies") != null)
String s2 = "OA.jsp?akRegionCode=PA_COMP_SEARCH_LAYOUT&akRegionApplicationId=275&paCallingPage=AddAssignment";
oapagecontext.redirectImmediately(s2, true, "RP");
OASubTabLayoutBean oasubtablayoutbean = (OASubTabLayoutBean)oawebbean.findIndexedChildRecursive("AddAssignmentSubTabLayout");
if(s.equals("Project") && oasubtablayoutbean.isSubTabClicked(oapagecontext) && !StringUtils.isNullOrEmpty((String)oapagecontext.getTransactionValue("paProjectId")))
String s5 = "PA_ASN_FCST_INFO_ED";
String s9 = "F";
s9 = Security.checkUserPrivilege(s5, "PA_PROJECTS", (String)oapagecontext.getTransactionValue("paProjectId"), oapagecontext, false);
if(s9.equals("F"))
Debug.log(oapagecontext, this, "Error : PA_ASN_FCST_INFO_ED previelge not found", 3);
OAException oaexception2 = null;
oaexception2 = new OAException("PA", "PA_NO_SEC_FIN_INFO");
oaexception2.setApplicationModule(oaapplicationmodule);
throw oaexception2;
if(oapagecontext.getParameter("GoBtn") != null)
if("Y".equals(oapagecontext.getTransactionValue("paMass")) && "0".equals(oapagecontext.getTransactionValue("paNumSelectedResources")))
OAException oaexception = new OAException("PA", "PA_NO_RESOURCE_SELECTED");
oaexception.setApplicationModule(oapagecontext.getRootApplicationModule());
Debug.log(oapagecontext, this, "ERROR:" + oaexception.getMessage(), 3);
throw oaexception;
String s6 = "T";
if(s.equals("Admin") && "Y".equals(oapagecontext.getTransactionValue("paMass")) && "1".equals(oapagecontext.getTransactionValue("paNumSelectedResources")))
Debug.log(oapagecontext, this, "resource id[19] is " + (String)oapagecontext.getTransactionValue("paResourceId"), 3);
if(oapagecontext.getTransactionValue("AdminSecurityChecked") == null)
String s7 = Security.checkPrivilegeOnResource("-999", (String)oapagecontext.getTransactionValue("paResourceId"), SessionUtils.getResourceName((String)oapagecontext.getTransactionValue("paResourceId"), oapagecontext), "PA_ADM_ASN_CR_AND_DL", null, oapagecontext, false);
if("F".equals(s7))
OAException oaexception1 = new OAException("PA", "PA_ADD_ADMIN_ASMT_SECURITY");
oaexception1.setApplicationModule(oapagecontext.getRootApplicationModule());
Debug.log(oapagecontext, this, "ERROR:" + oaexception1.getMessage(), 3);
throw oaexception1;
if("SUBMIT_APPRVL".equals(oapagecontext.getParameter("AddAsgmtApplyAction")))
oapagecontext.putTransactionValue("Save", "N");
else
oapagecontext.putTransactionValue("Save", "Y");
String as[] = oaapplicationmodule.getApplicationModuleNames();
String as1[] = oaapplicationmodule.getViewObjectNames();
Debug.log(oapagecontext, this, "no of app module: " + as.length, 3);
Debug.log(oapagecontext, this, "no of view: " + as1.length, 3);
for(int i = 0; i < as.length; i++)
Debug.log(oapagecontext, this, "app module: " + as, 3);
for(int k = 0; k < as1.length; k++)
Debug.log(oapagecontext, this, "app module: " + as1[k], 3);
Debug.log(oapagecontext, this, "*** assignmentType = " + s, 3);
Debug.log(oapagecontext, this, "*** projectId = " + oapagecontext.getTransactionValue("paProjectId"), 3);
if("Project".equals(s) && !StringUtils.isNullOrEmpty((String)oapagecontext.getTransactionValue("paProjectId")) && !"Y".equals(oapagecontext.getParameter("paMass")))
Debug.log(oapagecontext, this, "*** Setting default staffing owner for add delivery assignment -- projectId = " + oapagecontext.getTransactionValue("paProjectId"), 3);
oaapplicationmodule.invokeMethod("setDefaultStaffingOwner");
OAViewObject oaviewobject3 = (OAViewObject)oaapplicationmodule.findViewObject("RoleCompetenciesVO");
oaviewobject3.setMaxFetchSize(0);
oaviewobject3.setRangeSize(-1);
oracle.jbo.Row arow[] = oaviewobject3.getAllRowsInRange();
for(int l = 0; l < arow.length; l++)
RoleCompetenciesVORowImpl rolecompetenciesvorowimpl = (RoleCompetenciesVORowImpl)oaviewobject3.getRowAtRangeIndex(l);
Debug.log(oapagecontext, this, "roleCompetenciesVORowImpl" + rolecompetenciesvorowimpl, 3);
rolecompetenciesvorowimpl.setPlsqlState((byte)0);
oapagecontext.putTransactionValue("AddAssignmentInsertRowFlag", "N");
oaapplicationmodule.getTransaction().commit();
if("Y".equals(oapagecontext.getTransactionValue("paMass")) && !"1".equals(oapagecontext.getTransactionValue("paNumSelectedResources")))
if(!"SUBMIT_APPRVL".equals(oapagecontext.getParameter("AddAsgmtApplyAction")))
Debug.log(oapagecontext, this, "Save, Mass, NumSelectedResources>1", 3);
Debug.log(oapagecontext, this, "work flow has been launched", 3);
OADialogPage oadialogpage = new OADialogPage((byte)3, new OAException("PA", "PA_MASS_ASSIGNMENT_CONFIRM"), null, "OA.jsp?akRegionCode=PA_RESOURCE_LIST_LAYOUT&akRegionApplicationId=275&addBreadCrumb=N", null);
oadialogpage.setRetainAMValue(false);
oapagecontext.redirectToDialogPage(oadialogpage);
return;
Debug.log(oapagecontext, this, "SaveAndSubmit, Mass, NumSelectedResources>1", 3);
putParametersOnSession(oapagecontext);
int i1 = 0;
int j1 = 0;
String s21 = "SelectedResourceId";
int l1 = Integer.parseInt(oapagecontext.getTransactionValue("paNumSelectedResources").toString());
Debug.log(oapagecontext, this, "size of resourceArray = " + l1, 3);
String as2[] = new String[l1];
for(; !"END".equals(oapagecontext.getTransactionValue(s21.concat(Integer.toString(i1)))); i1++)
if(oapagecontext.getTransactionValue(s21.concat(Integer.toString(i1))) != null)
Debug.log(oapagecontext, this, "resource id = " + oapagecontext.getTransactionValue(s21.concat(Integer.toString(i1))).toString(), 3);
as2[j1] = oapagecontext.getTransactionValue(s21.concat(Integer.toString(i1))).toString();
j1++;
SessionUtils.putMultipleParameters("paResourceId", as2, oapagecontext);
Debug.log(oapagecontext, this, "redirect to Mass Submit for Approval page", 3);
oapagecontext.redirectImmediately("OA.jsp?akRegionCode=PA_MASS_SUBMIT_LAYOUT&akRegionApplicationId=275&paCallingPage=MassAdd&paProjectId=" + oapagecontext.getTransactionValue("p_project_id"), false, "RP");
return;
if("RETURN_TO".equals(oapagecontext.getParameter("AddAsgmtApplyAction")))
Debug.log(oapagecontext, this, "Return to Option Selected ", 3);
String s15 = (String)oapagecontext.getTransactionValue("PrevPageUrl");
int k1 = s15.indexOf("OA.jsp?");
s15 = s15.substring(k1);
Debug.write(oapagecontext, this, "*** RETURN_TO URL: " + s15, 3);
oapagecontext.redirectImmediately(s15);
} else
if("ADD_ANOTHER".equals(oapagecontext.getParameter("AddAsgmtApplyAction")))
Debug.log(oapagecontext, this, "Add Another Option Selected", 3);
oaapplicationmodule.invokeMethod("resetAddNewAssignment");
if(oaapplicationmodule.findViewObject("RoleCompetenciesVO") != null)
oaapplicationmodule.findViewObject("RoleCompetenciesVO").clearCache();
String s16;
if(!s.equals("Project") && !s.equals("Admin"))
s16 = "OA.jsp?akRegionCode=PA_ADD_ASSIGNMENTS_PAGE_LAYOUT&akRegionApplicationId=275&paProjectId=" + oapagecontext.getTransactionValue("paProjectId") + "&paAssignmentType=" + s + "&OA_SubTabIdx=0";
else
s16 = "OA.jsp?akRegionCode=PA_ADD_ASSIGNMENTS_PAGE_LAYOUT&akRegionApplicationId=275&paResourceId=" + oapagecontext.getTransactionValue("paResourceId") + "&paAssignmentType=" + s + "&OA_SubTabIdx=0";
Debug.log(oapagecontext, this, "nextUrl " + s16, 3);
if("Template".equals(s))
oapagecontext.redirectImmediately(s16, true, "S");
else
oapagecontext.redirectImmediately(s16, false, "S");
} else
if("UPDATE_DETAILS".equals(oapagecontext.getParameter("AddAsgmtApplyAction")))
Debug.log(oapagecontext, this, "Update Details Selected ", 3);
String s17 = "";
if("Staffed".equals(s))
s17 = "ProjStaffedAsmt";
else
if("Admin".equals(s))
s17 = "AdminAsmt";
else
if("Project".equals(s))
s17 = "PersonStaffedAsmt";
else
if("Open".equals(s))
s17 = "OpenAsmt";
else
if("Template".equals(s))
s17 = "TemplateAsmt";
String s19 = "OA.jsp?akRegionCode=PA_ASMT_LAYOUT&akRegionApplicationId=275&paProjectId=" + oapagecontext.getTransactionValue("paProjectId") + "&paAssignmentId=" + oapagecontext.getTransactionValue("wfOutAssignmentId") + "&paCalledPage=" + s17 + "&addBreadCrumb=RP";
Debug.log(oapagecontext, this, "UPDATE_DETAILS: URL: " + s19, 3);
oapagecontext.redirectImmediately(s19, false, "RP");
if(s.equals("Staffed") || s.equals("Admin") || s.equals("Project"))
String s18 = (String)oapagecontext.getTransactionValue("wfOutResourceId");
String s20 = (String)oapagecontext.getTransactionValue("wfOutAssignmentId");
Debug.log(oapagecontext, this, "outResourceId " + s18, 3);
Debug.log(oapagecontext, this, "outAssignmentId " + s20, 3);
if("SUBMIT_APPRVL".equals(oapagecontext.getParameter("AddAsgmtApplyAction")))
if(s.equals("Staffed"))
oapagecontext.redirectImmediately("OA.jsp?akRegionCode=PA_SUBMIT_ASMT_APR_LAYOUT&akRegionApplicationId=275&paAsgmtId=" + s20 + "&paResourceId=" + s18 + "&paProjectId=" + oapagecontext.getTransactionValue("paProjectId") + "&paAsgmtAprStatus=ASGMT_APPRVL_WORKING&paAssignmentType=" + s + "&paCallingPage=AddAssignment", false, "RP");
return;
oapagecontext.redirectImmediately("OA.jsp?akRegionCode=PA_SUBMIT_ASMT_APR_LAYOUT&akRegionApplicationId=275&paAsgmtId=" + s20 + "&paResourceId=" + s18 + "&paAsgmtAprStatus=ASGMT_APPRVL_WORKING&paAssignmentType=" + s + "&paCallingPage=AddAssignment", false, "RP");Hi Rani,
As soon as the transaction is commited the methods in the VORowImpl Class are called.
You can check in the VORowImpl class and search for the log messages.
Thanks,
Gaurav -
Where can I get the sample code of gantt chart?
hi, all
I want to use gantt chart component.I find this video http://download.oracle.com/otn_hosted_doc/jdeveloper/11/demos/DVT_Gantt_Chart/ADFDVTGanttChartDemo.html.
where can I get the sample code in this video?
I have got the demo <strong>dvt-faces-demo.ear</strong>.but in this demo, the code of events process is too simple.I want more detail code of date change, denpendency change and so on.
this is my mail [email protected]
Thanks
Best Regards
kenshin
Edited by: Himura Kenshin on 2010-8-20 上午4:57
Edited by: Himura Kenshin on 2010-8-20 上午9:03Hi Katia,
Essentially the same sample app which was referenced above (http://download.oracle.com/otn_hosted_doc/jdeveloper/11/demos/DVT_Gantt_Chart/ADFDVTGanttChartDemo.html). There are many features implemented in this sample which I'll be "reinventing the wheel" with. Its been a bit since I worked with the gantt component as I had to abandon for other development but will be getting back into it here shortly.
Namely as I remember, I had difficult time getting the gantt to load quickly with large amount of tasks, difficulty getting the selected item when using context menus or buttons defined within the control, and a few other minor issues which could be fixed as I was using the first release of 11g and cannot remember specifics. I'll let you know as I get back into it if I see similar problems.
For example, if you go to the ADF Demo Site (http://jdevadf.oracle.com/adf-richclient-demo/faces/feature/index.jspx) and click on "Project Gantt Custom Menu and Toolbar - add menus and buttons on the Project Gantt Menu and Toolbar". The buttons work, however if you first select a row in the left and then click the button, you have to click twice for it to work (in my findings the action listener never "fires"). So in my case I want to select a row and then have a custom event for that selected row when I click the button. There were other similar findings I had when I tried to go off of the examples.
Hope this helps.
Thank you,
Kris -
Need help on Analysing the oracle code.
Hi,
Here i try to frame question, pls understand and give the best way to solve this.
We have running 20 to 30 unix scripts on daily basis. Each script has connected to oracle session and execute the corresponding packages & procedures. Some scripts are running at the same time. At this time oracle code in the script is not executed due to the table locking in other script. We have oracle trace files whenever the oracle code is not executed it shows the error and terminates the oracle session.
Examples:
Below the sample oracle execution log file. where we get the error and terminate the oracle session for your reference.
==================================================================================
SQL*Plus: Release 11.2.0.1.0 Production on Mon Dec 10 06:18:45 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
Data Mining and Real Application Testing options
SQL> SQL>
Session altered.
SQL> 2 3 4 5 6 7 8 9 begin
ERROR at line 1:
ORA-00054: resource busy and acquire with NOWAIT specified or timeout expired
ORA-06512: at "SIEB7P04.P_ARCHIVE_TBL", line 42
ORA-06512: at line 4
SQL> Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
Data Mining and Real Application Testing options
goin into RunProcedures Function
0
SQL*Plus: Release 11.2.0.1.0 Production on Mon Dec 10 06:19:19 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
Data Mining and Real Application Testing options
SQL> SQL>
Session altered.
SQL> 2 3 4 5 6
PL/SQL procedure successfully completed.
SQL> Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
Data Mining and Real Application Testing options
goin into Check error report Function
Pkg_Tfm_If_Merge OK
==========================================================================
When you observe the above code, in unix script we try to connect to the oracle instance 2 times,
1st instance it was terminated with some error.
2nd instance it was successfully executed the oracle code.
By analysing the above log we found where the error was occured and the reson behind this also we know.
Assume the script called the procedure 'P_ARCHIVE_TBL' 5 times and the procedure works on different parameter(we could say different table) each time it was called.
Is it possible for us to know in which procedure call, it is errored out.
For any information pls revert us or ping me to this mail [email protected],
Regards,
Mani.Hi,
You would need to have an exception block in your pl/sql code. You should also save table name in a variable when this procedure is called for every table. You should return/print the error code from exception block alongwith the table name and then you will be able to know that during which call of this procedure, the error was returned.
Salman -
Need to understand the relation between ManualResetEvent and thread
please help me to understand the below code
what is resetEvent.Set() and WaitOne() ? what it does ?
var resetEvent = new ManualResetEvent(false);
ThreadPool.QueueUserWorkItem(
arg =>
DoWork();
resetEvent.Set();
resetEvent.WaitOne();
again help me to understand the below code
var events = new List<ManualResetEvent>();
foreach(var job in jobs)
var resetEvent = new ManualResetEvent(false);
ThreadPool.QueueUserWorkItem(
arg =>
DoWork(job);
resetEvent.Set();
events.Add(resetEvent);
WaitHandle.WaitAll(events.ToArray());
why this line WaitHandle.WaitAll(events.ToArray()); is required ?
why adding ManualResetEvent instance to list ?
looking for discussion. thanksWaitOne() will cause the current (main) thread to wait until the thread pool thread has called the Set() method. If you don't call the WaitOne() method, the code line below ThreadPool.QueueUserWorkItem(...) will get executed before the delegate that you
pass do the ThreadPool.QueueUserWorkItem method has actually finished its execution because the threads are being executed simultaneously:
var resetEvent = new ManualResetEvent(false);
ThreadPool.QueueUserWorkItem(
arg =>
//this will be executed simultaneously on thread B
Thread.Sleep(10000);
//tell thread A to continue
resetEvent.Set();
//thread A waits here until thread B calls the Set() method...
resetEvent.WaitOne();
string s = "abc"; //this line won't get executed until thread B has called the Set() method provided that the WaitOne() method is called by thread A above.
>>why this line WaitHandle.WaitAll(events.ToArray()); is required ?
It causes the main thread to wait until the Set method of all ManualResetEvent objects in the events list has been called. Othwerwise the execution of the main thread would continue immediately after the foreach loop has been executed. By this time the DoWork
method of all jobs has not yet been completed because they are being executed on another thread.
WaitHandle.WaitAll(events.ToArray());
string s = "abc"; //this line won't get executed until all the Set() method of all ManualResetEvent objects in events has been called
>>why adding ManualResetEvent instance to list ?
Because you (appearantly) want to wait for all objects in the list, i.e. you want to wait for the DoWork method to complete for all jobs before you continue the execution of the main thread (and go on to assign the string s to the value "abc"
in the above example).
Hope that helps.
Please remember to close your threads by marking helpful posts as answer then start a new thread if you have a new question. Please don't ask several questions in the same thread. -
Is it possible to sort the catalog codes?
Hi
We use catalogs on notification for object, part, damage etc.
The code is numeric.
But for the user it can be difficult to find the correct code to use, as the list is not sorted.
Is there a way to sort the list of catalog codes on the description field?
Best regards
TomCatalog codes are not linked to technical object types but, fundamentally should be linked so as to give more clarity to the thought process. For e.g, you have centrifugal pumps as technical object type, you can have catalog codes for either for this object type or it can me made common for all pumps.
Now for damage, cause, activities and tasks, you can actually maintain the few codes same across catalog profiles. For e.g. pump, gear box, compressors, etc the codes of damage can be 0010-Broken, 0020-Leaked, etc. The only catalog code group, which will change is the object part as it will vary with equipment types.
This will actually help you in running your reports effectively. For e.g. you can look for all failures, which were due to 'Leaked' as the damage.
I hope this helps.
Regards,
Ketul -
Why differences in the way different machines handle the same code??
OK, I've posted some other threads re some difficulties in getting the same code to function identically on, not only different platforms, but even on different machines running Windows!
Here's another, and I would really appreciate an explanation:
I have a tree control. Per the user's request, I made the right button function the same way it does on MS File Explorer: When they right click, the currently selected nodes are compared to the node they clicked over. If they clicked over a selected node, then the context menu for the nodes selected is displayed. If they clicked over a different node, then the selection is changed to the new node and the context menu displayed. If they right click over the tree control, but not a node in the tree, then the selection is cleared and no context menu is displayed.
Works great on my machine.
However, on some machines, no context menu is displayed, nor is the node selected... UNLESS THEY ALREADY HAVE A NODE SELECTED. I.e., if they have no nodes in the tree selected, they cannot display the context menu by right clicking on a node, nor does the selection change to the node they right click over. It only works if they already have something selected.
My app is distributed as an executable jar file and I am distributing the JRE with it, so there are no class path issues or differences in the JDK. Basically, my problem can be paraphrased as: Why doesnt' Swing behave the same way on different machines...? At least why not the same on the eame machine.
It's driving me nuts to think that I've resolved some UI glitch only to find out that, no, it's only fixed on some machines, not others.
Thanks.Well, I normally develop on OSX and then deploy to Windows. But, this last build I have switched to Windows XP. The kinds of differences I am seeing are subtle: what triggers a repaint of the UI and now, it seems, what events are getting triggered by mouse clicks.
My deployment is an executable jar file, therefore it uses the manifest in the jar, not any classpath variables. I deploy an entire JRE along with the app, and the bat file that launches the app ensures that is the JAVA_HOME I'm using.
I can only guess that it's some underlying difference in versions of the platform and OS that causes this.
Here's the entire code for this latest issue re the popups:
private void maybeShowPopup(NodeInfoTree tree, MouseEvent e) {
if (e.isPopupTrigger()) {
// They clicked the platform dependent popup trigger...
int x = e.getX();
int y = e.getY();
TreePath[] selectedPaths = tree.getSelectionPaths();
if (selectedPaths == null) {
selectedPaths = new TreePath[0];
TreePath clickedPath = tree.getPathForLocation(x,y);
if (clickedPath == null) {
// they right clicked, but not on a node, so clear the selection and return
tree.clearSelection();
return;
} else {
// They clicked on a path, so let's see if it is a selected
// node. Search the selected array of paths, short circuiting
// out if it is found...
boolean foundInSelection = false;
for (int i=0; (!foundInSelection && (i < selectedPaths.length)); i++) {
foundInSelection = clickedPath.equals(selectedPaths);
if (!foundInSelection) {
// They right clicked elsewhere than the selection, so
// reset the selection to the new path...
tree.setSelectionPath(clickedPath);
final TreePath menuPath;
selectedPaths = tree.getSelectionPaths();
if (selectedPaths == null) {
return;
} else {
menuPath = selectedPaths[selectedPaths.length-1];
// Since they did click on a node, now we need to determine
// what popup menu should be displayed...
tree.scrollPathToVisible(menuPath);
NodeInfo ni = (NodeInfo) menuPath.getLastPathComponent();
// If the last path component is null, then they don't have
// anything selected, so we do nothing
if (ni == null) return;
// See if the Node is overriding our default popup menu...
com.harcourt.applications.tgen.browser.nodes.NodeMenu nodeMenu = ni.getMenu();
nodeMenu.activate(tree.getView(),ni);
JPopupMenu popup = (JPopupMenu) nodeMenu;
if (popup != null) {
popup.show(e.getComponent(),
e.getX(), e.getY());
The nodeMenu.activate call is just used to check whether or not certain menu options need to be enabled or disabled before displaying the menu. My theory right now is that, on some of these machines (all windows), a right click of the mouse is not generating a mouse event unless they have already something selected. I don't think it's a focus issue, because if they left click to select a node, and then ctrl-left click to de-select it, the right button then no longer generates a popup menu. They must select a node, then right click. Maybe there's no mouse event generated, or maybe this line is failing on some machines?:
TreePath clickedPath = tree.getPathForLocation(x,y); -
I can not download my adobe reader,the checking code always failed. W7 SYSTEM.
I can not download my adobe reader,the checking code always failed. MY COMPUTER IN W7 SYSTEM.
wanghuaqiong wrote:
I can not download my adobe reader,the checking code always failed. MY COMPUTER IN W7 SYSTEM.
Sorry, I don't understand the checking code part. Could you please give more details? -
Regarding required ABAP knowledge to understand the APO-BW developments
Hi All,
Could you pls let me know what kind of ABAP skills that an APO consultant must have to understand the development code in the routines and user exits.
Best regards,
RamyaHi Ramya,
For ABAP consultant to work in APO, mainly you need to learn and
focus on working with structures.
Other areas for focus will be Badi's, user exits, function modules,
routines, enhancements which are more or less similar to other modules
Regards
R. Senthil Mareeswaran.
Maybe you are looking for
-
How can I have another Itunes account on the same computer for my wife?
How can I have another Itunes account on the same computer for my wife?
-
G4 flat panel crashes constantly!
About two weeks ago my G4 flat panel started crashing intermittently. Half the time it just would not start up again until it had been left for a while. Thinking the hard drive was overloaded, I backed up all my files and did a clean install of Tiger
-
Error: "Express Documnet "Update was terminated" received from author ...
Hi, While maintaining the Quotation we getting the following problem: Express Documnet "Update was terminated" received from author ... Update was terminated System ID.... SVP Client....... 400 User..... ABAP Transaction.. ME47 Update key...
-
Not getting response from Client Proxy
Hi, We are developing a scenario - File->PI->Proxy using ABAP Proxies.We are posting a file thru PI 7.0 to R/3 .In R/3 the server proxy(Inbound Asynchronous) will receive the message and BAPI will be called. The response from the BAPI will be reachin
-
New Request/Service Offerings not displaying on Portal via Catalog Group/ User Role
I have created some new service offerings and request offerings which I have published and are visible on the portal when logged in as an administrator. I have then added these new items into a catalog group which is tied to a pre-existing user role