I have 30 pin dice silverline ipod kit in my car and 30 to lighting cable and adapter plays audio but does not charge. Is there a fix

My 30 pin dice silverline ipod kit in my car worked fine with my old iphone. it charged and played audio. I bought both 30 pin to lighting (cable and adapter) from Apple store but it does not charge. It only play audio. I have verified that both adapter and cable are working fine. Is there anything to fix this?

Apple sells a 30 pin to lightning pin adapter - you can find it on the Apple on;line store - or Amazon sell 3rd party one - but if it didnt works with your 4S which also has a 30 pin input - there may be something else wrong

Similar Messages

I have a printer xerox 3220 on networking ,have pc´s and a mac ,problem:it´s already install but does not work ,only print many page with code program,i will appreciate the solution

i have a printer xerox 3220 on networking ,have pc´s and a mac ,problem:it´s already install but does not work ,only print many page with code program,i will appreciate the solution

Hi guillermospain,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
OS X: Connecting a Wi-Fi printer to your Wi-Fi network
http://support.apple.com/kb/ht3500
OS X Mountain Lion: Set up a printer
http://support.apple.com/kb/PH11145
OS X Mountain Lion: Reset the printing system
http://support.apple.com/kb/PH11143
Cheers,
- Judy

How do you get the IPAD2 to charge? We have tried both ways and it never goes any higher than the percentage it is? We have plugged it into our computer and into an electrical outlet but does not charge. We got it brand new so it should work.

We are having trouble getting our new IPAD2 to charge. We have hooked it up to our computer and no charge, we have used the outlet and still no charge. When we first connect it to an outlet it shows the battery but it immediately goes off and it is still at the same percentage hours later.
Do you have any suggestions as to what we need to do to get it charged?
thanks
Connie

Try resetting your iPad by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
Then try to charge.
It should charge from the outlet but may not from a USB. Try a different cable or adapter. If you don't have one, take it all in to Apple... the adapter may be defective. You have a 1 year waranty.

I have purchased an app, Jelly Defense, from the app store. It says downloaded on the computer but does not show up at all on the iPod. Restrictions are on and ready to receive. The Wi Fi says it's on too

The Wi Fi is on, but the app doesn't even show up onthe device. On my computer in purchased, it shows it's downloaded. Now what?

The requirements for that app state that you need a 3rd-generation or 4th-generation iPod touch, with iOS 4.2 or later. Is what what you have?

My iPod nano (newest version) screen lights up but does not work how can I fix this?

Need help please!!
I have an iPod nano, the newest version, it turns on, noticeable by a light that appears however it doesn't show the icons etc that the tactility of the iPod nano offers.
Does anyone know how to fix this?
Any help would be greatly appreciated,
Thank you for your time

Did you already try to reset the iPod?
How to reset an iPod nano (6th generation)
Press and hold the Sleep/Wake button and Volume Down button simultaneously for at least eight seconds or until the Apple logo appears. You may need to repeat this step.
If the above step did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep. Try resetting the iPod while it is connected to power.

I have a new i phone and pay for gps---it will show directions but does not use a voice - how do i get it to use the voice?

Just got an iphone and pay for gps---how do i get the voice to work--it shows the directions but doesn't say it.

If you did not buy one that specifically states it does voice directions-there is nothing you can do.
Check the app settings, check the app website.

TS1538 I am using windows 7 and my 3rd gen nano is not recognized in itunes. I have followed all online troubleshooting to no avail. My ipod is recognized by windows but does not appear in itunes.

I am using windows 7 and my 3rd gen nano is not recognized in itunes. I have followed all online troubleshooting to no avail. My ipod is recognized by windows but does not appear in itunes.

not recognized by anything: http://support.apple.com/kb/TS1369
recognized by windows, but not itunes: http://support.apple.com/kb/TS1363
solving the problem if the above does not work:http://www.instructables.com/id/What-to-do-when-iTunes-does-not-recognize-your-i Po/step1
(make sure you go to the next slides.

My iPod Classic 120GB is clicking and not turning on. It has been charged but does not hold charge. I am not able to restore factory settings. Error code and have tried troubleshooting options without success. Thoughts?

My iPod Classic 120GB makes a clicking noise when syncing with iTunes and will not sync. It will not turn on at this time and has been charged but does not hold the charge. After trying to sync, iTunes states that iPod must be restored. Have tried to do this but not successful, I receive an error code and have done the troubleshooting steps for the error and I am still not able to sync or use my iPod. HELP?

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

TS1369 After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?

After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?

I followed all the instructions on the suggested page. Many files in C:\Program Files\Common Files\Apple\ and C:\Program Files (x86)\Common Files\Apple\ could not be deleted. Message said ""Cannot delete files: It is being used by another person or program"' but could not find iPodService.exe in task manager (also, the "Cannont delete ... " did not mention iPodService.exe).
Deleted all that I could. Reinstalled iTunes. Still same result. iTunes and computer both recognize my old iPod. Only the computer recognizes iPod Touch.

I have a 4th gen. ipod touch. It has software 4.2.1 and itunes always tells me I need to update to ios 6. I always click download and install. After the download is complete, nothing happens. It doesn't install on its own. Thanks,

I have a 4th gen. ipod touch. It has software 4.2.1 and itunes always tells me I need to update to ios 6. I always click download and install. After the download is complete, nothing happens. It doesn't install on its own and there is no option to install manually.. Thanks.

Are you sure it is a 4G iPod? Does it have a camera?

Hi, I have an ipod classic that was synch to itunes on my laptop. Laptop got a virus, so I reset to factory settings. Downloaded itunes, it recognises my ipod, but does not synch

Hi, I have an ipod classic that was sync to itunes on my laptop. Laptop got a virus, so I reset to factory settings. Downloaded itunes, it recognises my ipod, but does not sync. Not sure how to now sync itunes and ipod

Restart your computer and attempt to restore again.

Hi there, I have a problem with my iPod Classic (from 2009). Everytime I connect it to my computer (Windows), iTunes does not work anymore. Music is automatically deleted on my iPod. Any suggestions please?

Hi there, I have a problem with my iPod Classic (from 2009). Everytime I connect it to my computer (Windows), iTunes does not work anymore. Music is automatically deleted on my iPod. Any suggestions please?

Thanks, for info, iPod Classic is a slower machine compared the Nano, unfortunately, if you read these discussions, majority of the freezes involved iTunes 10. Although if might be just slow and some impatient user just disconnect the iPod ands cause more problems. ( Yes I also did that but safely by doing a iPod Hard Reset, before disconnecting).
Here is the Apple support article that may help you.
http://support.apple.com/kb/TS1717
or my usual solution for Windows Users.
Antivirus has a tendency to freeze iTunes sync Operation with iPod Classic, causing a timeout, which corrupt your iPod filesystem, so when iTunes can't read the iPod, it is pointing to this problem. Other causes is when your iPod hardisk is dying, or your battery is dying causing hardisk crashes.
My suggestion.
Connect your iPod to the PC and run chkdsk, to fix any iPod diskerror, then disconnect it, after chkdsk complete.
Disconnect your PC from Internet. (just to make sure no nasties creep into your system while you syncing.
Stop the Antivirus program
Connect your iPod to the PC, using a high speed USB 2.0 port at the back of your PC, do not use any USB Hub.
When iTunes Open up, Restore your iPod please, this is for iTunes to map correctly, to fix the corrupted filesystem.
When Restore complete, eject the iPod and reconnect again.
Sync your ipod, preferably manually Manage in small batches and disconnect after every batch, to check that all is well.
When all sync is complete, and iPod disconnected, start back your Antivirus and connect back the Internet.
Good Luck!

I have a ipod u2 the screen displays an icon for the current conetar but does not start

I have a ipod u2 the screen displays an icon for the current conetar but does not start

Shockwave and Flash are not the same. Try installing a Flash plug-in. Here's the latest: Adobe Flash Player 11.2.202.183

HT1386 I have a brand new Ipod classic (Christmas 2012-13), a newish laptop (2012) and have downloaded the latest version of iTunes. However, despite the ipod being recognised by the laptop/iTines, telling me it is synchronising, it actually won't synch.

I have a brand new Ipod classic (Christmas 2012-13), a newish laptop (2012) and have just downloaded the latest version of iTunes. However, despite iTunes working fine on the laptop, the ipod being recognised by the laptop/iTunes, telling me it is synchronising, it actually won't synch. I have reset the ipod, tried different USB ports, restarted the laptop, and uninstalled / reinstalled iTunes, but still not working. Can anybody help ?

Well, I don't know if that's a software or hardware problem. You should take it to Apple Genius Bar or send it to service center. And one more thing, Its not synch...... Its Sync... Just saying... It would help if you send pictures of the problem. Such as the screen of iTunes saying it's syncing. It will help everyone and me...

I have an Ipod touch 4th generation 8gb and it comes on but does not go past the apple logo

I have an ipod touch 4th generation 8gb and it comes on but does not go past the apple logo. What do I need to do?

This problem happened to me a month ago. The way I used to fix it:
1. Go it DFU Mode. For going into that, check this page.
2. Connect your iPod to your PC which has iTunes and iTunes will detect your iPod in recovery mode.
3. Press Shift + Restore if you have the .ipsw firmware file downloaded on your windows PC or just click Restore and follow the instructions to download the firmware file.
4. Wait and finally you're done!

I have 30 pin dice silverline ipod kit in my car and 30 to lighting cable and adapter plays audio but does not charge. Is there a fix

Similar Messages

Maybe you are looking for