I have a canon 7d and my aperture version 3.4.5 is not recognizing the raw format? The Can not review any raw photo in the adjustments/raw fine tuning controls.

When i click on the adjustments everything is grayed out and the messages states " Image Not Found'.
Are you seeing broken arrows or yellow warning triangles, when you enable badge overlays?
That looks, like your original image files were missing. Are your images referenced or managed?
Create a smart album with the rules "Files status is missing" or "Files status is offline". This will show you any images, where the original raw files cannot be found.

Similar Messages

I have a canon 70d and just purchased elements 12. It will not open a raw file for me. I have been advised to download the latest version of camera raw, i have done this and it still says my camera is not supported. I really need to open my raw files. Can

i have a canon 70d and just purchased elements 12. It will not open a raw file for me. I have been advised to download the latest version of camera raw, i have done this and it still says my camera is not supported. I really need to open my raw files. Can anybody help me.

You'll need to update to at least ACR 8.2 for the 70D to be recognized. The normal way to update PSE12 to the latest CR is to use Help / Updates in the Editor which should update to ACR 8.5.
According to Adobe's website PSE12 shipped with ACR 8.1 and you say it says yours is reported as ACR 8.0.
Are you using PSE 11 and not 12? PSE 11's maximum ACR version is 8.0.

I have a Canon MP640 and I am trying to connect my Macbook Air to the wi-fi how do I do this?

I have a Canon MP640 and I am trying to connect my Macbook Air to the wi-fi how do I do this? I have been able to connect through the USB no problems.

What version of mac are you running? Have you downloaded any of the drivers/software off the website yet? If not, you will need to download and install the CUPS Printer Driver and the Canon IJ Network tool.
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp640#DriversAndSoftware
Then, you will want to open and use the Network Tool to set up the network connection
http://kbsupport.cusa.canon.com/system/selfservice.controller?CONFIGURATION=1011&PARTITION_ID=1&secureFlag=false&TIMEZONE_OFFSET=&CMD=VIEW_ARTICLE&ARTICLE_ID=69015
Hope this helps!

Can I go to an Apple store and have IOS 8 uninstalled and an earlier version installed? IOS 8 has destroyed the battery life on my 4S

Can I go to an Apple store and have IOS 8 uninstalled and an earlier version installed? IOS 8 has destroyed the battery life on my 4S

No; they will not downgrade that device, and it’s highly unlikely that they have the same iPhone model running an older iOS version.
(115097)

I have a canon MG5320 and cannot print in grayscale. How do I turn the off setting to on?

I have a Canon Mg5320 printer and cannot print in grayscale. I found the setting, however it is on the off position. How do I turn it to on?

You should be able to tick the box next to the text as shown below.

Aperture 3.1.2 Raw fine tuning

Started to use manual control on my canon 60D. After importing the RAW files into aperture 3.1.2, the RAW fine tuning controls (except for boost and hue boost) are greyed out and not selectable. Is this normal? The controls work fine with other settings on the camera (Av, Tv, etc.). Thanks!

Actually, looks like the sliders are greyed out on all settings, manual, Av, and Tv?? This just happened recently and I don't think there was an update. I rebuilt the database already. Any suggestions?
Thanks!

Aperture 3 with Nikon D90 - How should raw fine tuning look like?

I try to trouble shoot my Aperture 3 (trial) installation. I have some troubles with the raw fine tuning controls and after reading the manual (again) I noticed that the fine tuning controls I get for my D90 are different from the ones displayed in the manual.
I get boost, hue boost / sharpening, edges / moire, radius, noise-reduction sliders.
In the manual there is no noise-reduction slider, just a check box for Auto Noise Compensation.
I got that control in Aperture 2, but not in Aperture 3. Now I’m wondering if something went wrong with my Aperture 3 installation. That would explain the problems I have with raw fine tuning. But before I try a complete clean install of my Mac i would like to know if I get the right raw fine tuning controls in Aperture 3.
Does anybody use Aperture 3 and a Nikon D90 and could tell me how the raw fine tuning controls he gets in Aperture 3 look like?
Thanks.

Greetings, First be sure you have your d7100 properly set to take maximum detail NEF images.
Go to your d7100 shooting menu and choose NEF (Raw) recording > Type
Choose N Lossless Compressed
Then go to NEF (RAW) Recording > NEF (RAW) Bit depth
Choose 14 bits
You were given good advice that you should not mess with the raw fine tuning brick in Aperture 3.6
Your d7100 has a default RAW import preset - make sure you have somehow not changed that Apple Aperture coded
raw fine tuning preset - this could make all your images far less sharp on import. You can easily revert to the Aperture 3.6 raw import brick default for the d7100 if you have somehow changed it by error. And always be sure to use your Aperture loupe or full screen viewer when applying any adjustment bricks.
Finally be sure that you understand the differences between the Sharpen adjustment and the Edge Sharpen adjustment. Both of these are very sensitive and very different sharpening tools. I do not shoot with a d7100, but use other Nikon FX DSLR's and I have never felt that any of my NEF imports lacked either Sharpness or Edge Sharpness given the Apple Aperture default raw image digital converters for each particular Nikon body. Good luck.

I have a canon hf10 and need to be able to transfer my video from my camera to my computer so I can burn them to dvd is there a step by step process? i'm new 2 the mac world. I tried downloading imovie 7.1.2 but it said, "An eligible iMovie application

i have a canon hf10 and need to be able to transfer my video from my camera to my computer so I can burn them to dvd is there a step by step process? i'm new 2 the mac world. I tried downloading imovie 7.1.2 but it said, "An eligible iMovie application was not found in the location /Applications." can anyone give me step by step instructions? i would hate to call the geek squad!!!LOL

and what's a firewire port? how do i know if i have one?

We have a Canon SX40Hs and cannot activate the digital zoom function. can you help?Thanks

We have a Canon SX40Hs and cannot activate the digital zoom function. I have tried changing the mode from Auto to "P" to "Tv" etc and the dig zoom function is greyed out and not accessible. Any help?
Thanks

Actually, this is a friend's camera, but yes, I went to the menu and when I got to the digital zoom option, it is greyed out (not accessible). That is the problem. I shoot in the EOS line so figured maybe there was a custom function somewhere that was causing the problem, but Power shot line apparentley doesn't have custom functions. Thought maybe digital zoom is only availabel in certain modes (pernaps not available in "green square"), but changing mode didn't seem to make it accessible either. I am just not familiar with the powershot cameras so ... any other suggestions?

I have a printer canon mp495 and I'm trying to connect it to my iPad. But my iPad can find it the printer. Do I have to reset the printer or what app do I use?

I have a printer canon mp495 and I'm trying to connect it to my iPad. But my iPad can find it the printer. Do I have to reset the printer or what app do I use?

Printopia is Macintosh-only. <Printopia for Macintosh>
Another program that is available in both PC and Mac versions is FingerPrint. <FingerPrint>
For either program, your computer must be on and awake any time you want to print.
Fred

I have a canon 60D and I'm trying to view images on the Ipad using the sd reader but no luck. Any help or ideas?

I have a Canon 60D and I am unable to view or transfer photos to the Ipad using the SD Card reader. I have been able to view images with a Canon T3i. Are there certain settings I need to set on the 60d or should it work automatically? anythoughts or ideas? thanks

Are the photo's you're trying to view/download in Raw? I've had difficulty downloading Raw files, but have had no issues downloading JPEG files. Also, check a setting in your Canon, called communication. From what I've read (I'm a Nikon D5100 guy myself), communication needs to be set to PTP, not normal. I'm not sure how that will help if the pictures are already encoded?
Well scratch what I've written. I just googled the 60D and supposedly, JPEG and Raw are supposed to transfer through the SD card reader easily. So, I'm clueless. Sorry.......
Message was edited by: rbrylawski

I have a Canon 6d and would like to convert my raw ( CR2) photo's into dng files. Adobe DNG converter 8.4 doesn't recognise the CR2 files. How can i solve this?

i have a Canon 6d and would like to convert my raw ( CR2) photo's into dng files. Adobe DNG converter 8.4 doesn't recognise the CR2 files. How can i solve this?

It is possible that you are not following instructions correctly in the DNG converter. The DNG converter interface asks for the FOLDER that contains your raw images. Choose the folder, but don't open it. After you have chosen the folder, click on the Convert button. The DNG conversion process should start. Does that help you?

My software is Mac os x 10.7.2 (lion) and i have a canon mp630 and my question is: can i print a cd with the "cd labeler" that i want to purchase from apple store, just because there´s no drivers from canon (cd label)to the lion yet

I have the last version of mac os x (Lion) and i have a canon MP 630 printer.
I went to apple store to buy the app "cd labeler" but i don´t know if it´s possible to print a cd, because when went to Canon to download the last version of cd label printer, there´s no for this last version of mac osx .
Even so is possible to print a cd?
Thanks
Jorge

I have the last version of mac os x (Lion) and i have a canon MP 630 printer.
I went to apple store to buy the app "cd labeler" but i don´t know if it´s possible to print a cd, because when went to Canon to download the last version of cd label printer, there´s no for this last version of mac osx .
Even so is possible to print a cd?
Thanks
Jorge

I have a Canon MP990 and i keep getting an eror code. I have searched for a driver update but cannot seem to find one- Any ideas please?

I have a Canon MP990 and I keep getting a communication error code 306A. I have tried the usual turning everything off and starting again all to no avail. I have searched for a driver update but cannot seem to find one- Any ideas please?

Hi Peter!
I'm sorry to read that you are having issues with your Sync account.
Your best bet is to follow the steps described in this blogposts and open a bug:
https://philikon.wordpress.com/2011/06/13/how-to-file-a-good-sync-bug/
After that, if you don't want to user Sync in your computer, you can stop it with this simple steps:
* At the top of the Firefox window, click on the Firefox button (Tools menu in Windows XP) and then click Options.
* Once the options window opens, click on the Sync tab.
* At the bottom of the Sync tab click on '''Deactivate this Device''' link

I have a Canon 6D and the new Panasonic GH4 both are not in the list of supported cameras! What can I do?

I have a Canon 6D and the new Panasonic GH4 both are not in the supported list of cameras in Finalcut Pro 10 ! What can I do???

Plenty of cameras don't make the list for various reasons but work fine,
If you have the cameras but not the application, downliad the trial version and see how it goes.
If you have both the cameras and the app already, do some test projects to see.
Russ

I have a canon 7d and my aperture version 3.4.5 is not recognizing the raw format? The Can not review any raw photo in the adjustments/raw fine tuning controls.

Similar Messages

Maybe you are looking for