I have a Comcast Modem which is connected to a Netgear Router for my home network. I just bought the Apple Time Capsule. Do I simply take the Netgear Router offline and substitute the Time Capsule. If so does this require a new Network name and security?
The router and modem are connected t oa PC but all the other computers on the network are Apple.
You should be able to substitute the TC for the netgear.. although you might find the wireless range is somewhat less.
Power down both the netgear and the cable modem.. plus all the clients.. leave the modem off for 5min at least.. maybe 15min..
Put the TC in place of the Netgear.. you do not need to change the name, although PC will work better if you keep everything SMB compatible.. that means both TC name and wireless names, short, no spaces.. pure alphanumeric.
Power up the modem.. wait 2min then power up the TC, then the rest of the clients.. check in airport utility to make sure the TC got public iP on the wan interface.
Similar Messages
-
Every day, my keyboard and track pad don't work, so I have to shut my computer off and start it back up. It does this multiple times a day. What can I do to make it stop doing this?
Try resetting your SMC and PRAM.
Resetting the System Management Controller >>
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
I have a 4s iphone and want to date and time stamp photos taken with the regular camera installed on the phone. Does this require a separate app?
For such to be visible, yes. Many such apps in the app store.
-
need lightroom 4.4 asmac is 10.6.8 and not compatible with anything higher. Does this come with the creative cloud? Would really like a disc but that doesn't seem to happen anymore. Currently have cs4 and d7100 hence need 4.4 to open raw Any ideas? Is this now customer service or does adobe have a customer service team . Site not user friendly. Thanks
Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive? -
Hello All. This is ASIF MALIK from India. I tried many time to update my iPhone 4 iOS 5.0.1 through my MacBook Pro but every time I recieve an err=-3259 or err=-3156 etc. errors. I was highly disappointed by doing this from passed 4 days gone maaadddd.
But TODAY I tried it updating my iPhone 4 iOS 5.0.1 through MY HOME PC Windows 7 Ultimate 32 bit after downloading iTune 10.5 & Guys good news is that I UPDATED my iPhone 4..... The plus point of using my windows 7 ultimate PC, even i got the same error twice or thrice but I REUME ALL & then I got the result. I don't know what was the problem updating with my MacBook Pro but FINALLY I SUCCEDED:-) ENJOY GUYSjust try downloading the *.ipsw file and then update the phone. To download the software and instruction to manually update your phone. follow this link -> www.felixbruns.de/iPod/firmware
-
I have an ATV 1 which is connected to my Bose Lifestyle System. I just expanded the system outdoors using a second Bose System Amp. Does anyone know if I'm able to connect my ATV 1 to the Bose expansion module in addition to keeping it connected to my main Lifestyle System using RCA cables? The new amp has RCA input jacks for auxiliary inputs. Thank you.
hello, normally such issues are caused by a firewall/security software which doesn't recognize & therefore blocks new firefox versions. please remove all program rules for firefox from your firewall and let it detect the new version of the browser again.
[[Fix problems connecting to websites after updating Firefox]] -
Hi I just bought an Apple TV device i have detected the 2WIRE and entered the Product Key Password. It takes that okay the screen goes to Connecting followed by Activating below in small print it says Setting date and time but nevr leaves that screen it just clocks there for evr???
Welcome to the Apple Community.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123. -
iPhone 4 used to connect to internet site when email had reference to the site and I requested it. iPhone stopped doing this. How do I get it to resume doing it?
Have you tried restarting or resetting your iPhone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds). No data will be lost. -
I connected my iPad and iPhone to sync just now and got the message, "The iTunes Library cannot be saved. An unknown error occurred (-54)." What does this mean? I clicked "OK" and the sync appears to have worked properly. Thanks - dalebird (MacBook Pro, g4 17in)
Morning dalebird,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/ts2529
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/HT1451
Best of luck,
Mario -
I have an Ipod that is about a year old which was connected to an old computer that has crashed. I just downloaded itunes on a new computer, hoping to download my music from my ipod, but it won't let me. Any ideas how to sync them?
Engadget has a guide for this.
http://www.engadget.com/2009/11/25/how-to-get-music-videos-and-photos-off-your-i pod-iphone/ -
Hello Folks.. I have recently purchased a ipad mini with wifi Cellular from best buy online.. Model: MD543LL/A. Can I use this ipad in India with any local networks? Basically does this ipad support GSM network?
Message was edited by: Murali.KRSorry but that was a completely pointless post.
-
The most important piece of info about an update I need is how much data does it require. I am travelling and using prepaid data. I cannot even consider an update until I know how much data it will use. Please provide this information.
http://www.apple.com/feedback/macosx.html
-
I tried to download the latest OSX for my iMac - Mountain Lion.
This is the message that I received:
"We could not complete your purchase. The product distribution file could not be verified. It may be damaged or was not signed."
What does this mean?The only thing that worked for me was to boot in safe mode.
Power down. Then press power button and hold 'shift' key until grey screen with progress bar appears... Once booted and logged in just open safari and browse to applestore.
No trouble at all once I did this.
Reminder: create full backup before you upgrade OS
Hope it helps. -
I just bought an Apple TV and I'm trying to connect airplay but the icon does not appear! My iPhone and Apple TV are on the same wifi connection but the airplay button does not apper? The same thing with my iPad mini
Try restarting all devices including portable iOS ones and your router.
Check Airplay is not disabled in AppleTVs settings.
AC -
I have a short homemade film burnt onto a DVD, I now want to import the movie into IMOVIE on my MacBook Pro so that I can edit it, how would I go about doing this? Welcoming any guidance. Thanks in advance.
1. Insert your DVD.
2. Open Disk Utilities (Application> Utilities> Disk Utilities). Highlight your DVD and press "New Image" on the upper toolbar.
3. Choose the location you would like to save your DVD from the drop down menu, "Desktop" is usually the best choice. Then click Save.
4. When finished, your DVD icon will appear on the desktop with the .dmg extension.
5. With iMovie open, double-click the .dmg file you created to mount it. The iMovie import window will then appear asking you to choose. Click Import All and wait for the Import to complete.
Maybe you are looking for
-
Hello Everybody, and thank you very much if you can answer to my little problem So here is the beginning of my script. At the end it will be a script to batch convert Psd files to jpeg in different resolutions, in different folders. I wanted to under
-
Greetings - I am trying for the first time to work with some HD video and am having many problems. The first is this: I can import the files into Photoshop Elements 7 organizer just fine....but I never get a real image clip generated as a thumbnail.
-
Hi everybody! I've just downloaded Safari for Windows (XP) and I discovered that most of the text has been replaced with _______ (underlining _ ). I think that the problem appears with the <h[int]>. Does anyone else have this similar problem or maybe
-
Oracle equivalent for OBJECTPROPERTY
Hi Friends, I want the oracle equivalent for the following sql code, Select @Command = 'IF OBJECTPROPERTY(object_id('''+ @TableName + '''), ''TableHasForeignRef'') = 1 DELETE FROM ' + @TableName + ' ELS
-
Good Receipt Cancellation in migo
Hi everybody, I have an issue. During cancellation of goods receipt in migo, I have to give a popup message that TO has been created with TO nmber. Is there any exit during cancellation of GR? Do any body have solution for this?