I have a dv7-4153d. Audio has sporadic skipping about every 3-8 seconds on all types of playbacks. .

HP dv7-4153cl. Audio skips contiuously on all types of play backs. CD's, wmv.,pps."utube"  ect.  Does it about every 3 to 8 seconds, just like a skipping record. Have reinstalled audio driver. Run short and long primary hard disk self test and memory test. Did a sfc /scannow, and Checked the lengthy drive for errors.  ALL PASSED.

Hi,
One thing to check is the following.
If you have HP 3D DriveGuard installed, open windows Control Panel, open HP 3D DriveGuard, click the Disable button, click Apply to save the change, then click OK.  Restart the notebook and see if this has had any effect on the sound issue.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

  • I have just updgraded to Mavericks and my bootcamp has vanished! I have an entire webite that has not been backed up in a while. All lost.... anybody got any ideas?

    I have just updgraded to Mavericks and my bootcamp has vanished! I have an entire webite that has not been backed up in a while. All lost.... anybody got any ideas?

    If you cant mount that partition in the disk utility, then try these steps in the terminal:
    http://chrislee.kr/wp/2011/05/23/how-to-mount-bootcamp-drive/

  • When I was editing a picture that I reposted on instagram, I hit the edit button and then a white screen appears and randomly shuts down. I have also noticed that my iPod has been crashing about every single 30 minutes!

    When I was editing a picture that I reposted on instagram, I hit the edit button and then a white screen appears and randomly shuts down. I have also noticed that my iPod has been crashing about every single 30 minutes! Please help!

    The iPod crashing when editing a photo is a known bug in iOS 5.1.1.
    For the other problem.
    Try the following:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod.
    If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order

  • I have an ipad that only has wifi and I am unable to connect because all the networks are locked for access.   Is there anything that I can attached to my ipad that will make it possible for me to access the internet

    I need help.  Just purchased an ipad with wifi service only.  Is there anything that I can get that will allow me to access the internet.  I keep getting network connections that have a lock which makes it unable to log on.  Picking up numerous with sites with the lock.  Help did I make a mistake in getting this ipad.  If so, can I trade it in for one that is more network friendly.

    If you expect to use a WiFi only iPad it needs a wireless network. It is customary to have your own versus using someone else's.
    Nothing is more network friendly than an iPad.
    You couldn't possibly have expected to sponge off a service someone else is paying for?
    read the fine print

  • Help! 1st track from ripped CD's to iTunes, has a skip about 23 sec in?

    I hope somebody can help me with this. I am ripping all my CD's using Apple Losless. Around 23-30 sec into the song, you hear the digital skip. It only seems to be on the 1st track of the CD. I have already gone into preferences and made sure that error correction is on. Burning at different speeds does not seem to make a difference either. Please Help.

    Have you tried ripping it to MP3 instead?

  • I have a brand new mac and when I play music EVERY song randomly skips about every 3 seconds and then plays again

    Is there something I need to do in itunes to get this to work?

    AND yea i afraid to sync my iphone and lose everything ;( i had everything perfect sync ing perfect ical,contacts,mail,apps and now sence new library I dont wana lose everything.....my hole life runs on my fone i need help bad

  • As described in the header, my Apple TV (120GB) has its LED blinking amber non-stop, no video, no audio. It is about 2 months old and I have never had issue with it before.

    As described in the header, my Apple TV (40GB) has its LED blinking amber non-stop, no video, no audio. It is about 2 months old and I have never had issue with it before.

    They stopped making that model four years ago.  There is no way it is two months old.  Trying connecting it to a computer with iTuens via a USB cable to see if you can re-install the firmware.

  • I have downloaded a movie in iTunes which will play in iTunes but it has has no audio. Has anyone got an idea what to do because all the audio is on & working in other applications.

    I have downloaded a movie in iTunes which will play in iTunes but it has has no audio. Has anyone got an idea what to do because all the audio is on & working in other applications.

    Hi there Fijiforme,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iTunes for Windows XP: Troubleshooting video playback
    http://support.apple.com/kb/TS1386
    Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
    http://support.apple.com/kb/ts1718
    -Griff W.

  • HP Pavilion dv7-1250en Audio Driver problem for Windows XP SP3 x86

    Hi. I have installed Windows XP SP3 in HP Pavilion dv7-1250en and has found all drivers except Audio Driver for Windows XP SP3 32-bit.
    Everest found 2 Audio device
    1) IDT 92HD71B7 @ Intel 82801IB ICH9 - High Definition Audio Controller (A-3) PCI
    2) nVIDIA HDMI @ Intel 82801IB ICH9 - High Definition Audio Controller (A-3) PCI
    Please help.
    Thanks in advance.

    Try sp41693
    IDT High-Definition Audio CODEC Driver,
    sp41693, vista driver, reported work in XP here
    Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

  • The last few times I've used headphones in my iPad, the audio has been all messed up to the extent where it's better to just use the internal speakers and not the headphones. I've tried multiple pairs of headphones to no avail. Help?

    The last few times I've used headphones in my iPad, the audio has been all messed up to the extent where it's better to just use the internal speakers and not the headphones. I've tried multiple pairs of headphones to no avail.
    The iPad was bought in mid-June, but I did not get extended Apple-Care warranty on it. Any idea of what's happenening?

    Multiple means how many? If only 2 or 3, they could all be faulty. Try the headphones in some other device, to make sure they are OK. Or there could be something wrong with the headphone port.
    Your iPad is still covered by the 1-year warranty so you should make a Genius appointment and have it looked at.
    Another thing to try is to plug in the headphone jack a few times in succession to see if it frees up something inside the port.

  • Working with clips after audio has been extracted

    Can anyone tell me if it is possible to trim clips once the audio has already been extracted? I have tried to do this, but the trimming only applies to the video strand, leaving the audio full length (an out of sync).
    Or does any trimming have to be done before audio extraction?
    Thanks.

    Go into the "timeline" mode (as opposed to the "clips" mode). Place the playhead at the point you want to make the cut. Click on the video clip, and you will be able to "split" the video clip. Leave the playhead alone, then click on the corresponding extracted audio clip below the video clip. You will be able to "split" the audio clip. You may then want to "lock" the audio clip to the video clip at the playhead, so that it stays in sync.
    If you already split the video clip and moved it, you may be able to re-sync it with the audio by dragging the audio clip in the timeline mode. In addition, if you set the preference to snap to the beginnings of clips, you should be able to accurately re-sync.

  • Pavillion dm4 audio has stopped working

    Hello,
    The audio on my HP dm4-2015dx (Product #LW478UA) notebook has suddenly stopped working. It runs Windows 7 Home Premium and has an Intel processor. I use Chrome as a browser.
    I have updated BIOS, chipset and audio drivers.
    I have run the Windows audio troubleshooter and it finds no problems and that the latest versions/updates are present.
    I have checked that the Mute button is not on and that volume control is at maximum, as well as checking volume control on Youtube, etc.
    I have re-downloaded the audio driver and saved it to downloads, then uninstalled the active driver, shut the machine down, pulled the battery, held the power button, restarted, entered through the BIOS menu, loaded defaults, etc. then installed the driver from downloads and set it as default.
    Nothing. 
    Both the Sound icon on the taskbar and when I go into Control Panel, Hardware and Sound, Sound, Manage Audio Devices, Playback tab actually show the sound level going up and down when I play a Youtube video, for instance. But no audio comes out of the laptop's speakers.
    Can anyone please provide some guidance to correct this issue? 
    Thank you,
    Doug

    Hi Doug,
    Please take a look at this document, and let me know if the troubleshooting steps help resolve your no sound from your notebook speakers.
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • I have no audio unless I use the Lookout App first..then all is good...i have no volume bar unless I use Lookout

    I have no audio unless I use the Lookout App first..then all is good...i have no volume bar unless I use Lookout

    MGoodie wrote:
    I have done as you asked and it is still the same.
    I have also previously "flattened" my playbook several times in the hopes my sound settings would be reset.
    Is there nothing like a diagnostics app or an app/interface to be able to manually change options such as sound outputs.
    If there is not please make one as it would be very much appreciated.
    I have tried downgrading the os aswell. I have never had the audio switch to the speakers.
    Something has been "switched" and will not reset by os change or updates.
    ::Edit::
     I have tried the new 201 update and it did no correction to audio or the availability of a manual output option.
    ::End Edit::
    I am asking that a manual option be made available to force output changes. if this was possible I would know if it is software or hardware related.
    I also want to make it very clear that I am highly disappointed with this glitch. your tablet would be #1 in my eyes otherwise..  I want my sound back RiM, make it work.
    Based on the above i think you might have a hardware issue and only a call to support will get it addressed.
    it does have a 1 year warranty on it by RIM. Place of purchase might be 30 days or longer depending on where you bought it from.
    http://us.blackberry.com/support/playbook-support/contact.jsp
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • Realtek Hi Def Audio has no sound for X540 5.1 rear two speakers

    Hello-I have an Idea Centre K430 Desktop running Win8.1Update1-64bit,IE11,12 GB Memory and 1 TB HDD. I have X540 Logitech 5.1 speakers installed. I recently installed Realtek Hi Def Audio Driver 2.75. After installing this driver.I observed that my speaker system was reduced from a 5.1 system to a 3.1 system. I tried  adjusting different settings in the Lenovo HD Audio Manager without correcting the rear two speakers' sound problem. I switched spear configurations.Quadaphonic produced sound on the two front and rear speakers and no sound on the front middle speaker. I swithed to th 7.1 configuration and received sound on the 5.1 configuation. I do not have the two other speakers required for a 7.1 configuration. I am convinced that my speakers are working and there is something wrong with my 2.75 driver download. I deleted  my previous 2.75 driver and re-installed the 2.75 driver from Realtek's download site. Thanks.
    Carl W Lesesne

    Not all is lost, however. Your sound card *can* output surround sound (already encoded) from a DVD, by enabling pass-through. I'm looking at my drivers in entertainment mode, and you would enable "Dolby Digital Bitsream Out: On" on the Dolby Digital page. Same thing on the DTS page.
    I know I had my Audigy 2 ZS hooked up to both the analog and digital ports on my receiver, and to be honest, I couldn't tell the difference. I'm sure the X-Fi would be give the same result. If your receiver does not have analog 5. inputs, then you are SOL. If they do, however, then there really is no degradation using the analog inputs. Really expensi've receivers ($000+) have top quality DACs, but the ones on the X-Fi (to the best of my knowledge) are as good if not better than the DACs on any standard receiver. The digital data needs to be converted to analog somewhere, and it doesn't really matter if its done by the card, or by the receiver. I would highly suggest doing what I said - hook up your X-Fi to both the analog and digital ports simultaneously, and switch between the two while playing some stereo music. If you are happy with the analog output's sound, then just go analog. Forget the myth that digital has to be better. Its only better if the DACs are better, and they probably aren't.
    EDIT I just noticed you were talking about an Audigy 2 ZS, but all this still applies. Enabling pass-through may be a bit different, and I can't remember exactly how since I had already determined the analog outs sounded good and I didn't bother keeping the digital connected using my Aud2ZS.Message Edited by opozoid on 0-2-2005 06:40 AM

  • Audio has stopped on my MacPro with Yosemite.

    The audio has stopped working. Was working fine earlier today.  I have shut down and restarted several ways and times.

    Finally figured it out.  My "Sound Output" had changed to "Digital" for some reason. Once I changed it back to "Internal Speakers" it's all good.

Maybe you are looking for

  • Can I run my iPad to a projector wirelessly with no internet?

    Before I start, you need to know that I don't know what things like "WAN" and "LAN" mean, this seems to be the cause of my misunderstanding so far.  If you could help me out in common English words, that would be fantastic! I'm a music teacher, I tea

  • TS3634 Help, how to importing video in iMovie'11

    I am using the Sony Handycam HDR-HC 9 OS X 10.8.4, MacBoo Pro early 2011 iMovie'11 I want to import the video shot with the Handycam into iMovie. The cable I am using is iLink to FireWire 800. When I put the camera mode in to edit/play and I plug in

  • Putting the Displays to Sleep with Game Server Running

    I have a game server, ok? I have the console box on my desktop, which runs the sever (COD2) and keeps it active. I try to put my displays to sleep ( hot corner bottom left ), but it always turns back on again. I don't want to put my computer to sleep

  • PO report with Netprice+Tax value

    Dear All, Is there any report available  with Netprice+Tax value? Rgeards

  • Print Track

    Can anyone tell me where to find info. about how to get print job, which sent from a client. I would like to get client info before they can print anything.