I have a ipad 64GB Wifi 3G and i can not get onto the internet, i have set up wifi but it wont get on the net
i have a ipad 64GB Wifi 3G and i can not get onto the internet, i dont have a data plan yet & i have set up wifi but it wont conect to the internet
From your description above I conclude that the WiFi transmitter and receiver of your iPad appear to be working, but I abviously cannot tell how well they are working.
Have you reset your iPad already?
Press the Home and sleep/wake buttons simultaneously until only the white Apple logo appears on the screen - usually 10 to 15 seconds - ignore anything else.
Genius Bar: http://www.apple.com/retail/geniusbar/
Similar Messages
-
I have an ipad 64GB (first generation) and could not do upgrades on it. What can i do and how can you help? I need to dowload some business applications but requires 6.0 iOS and up but I have 5.1.1. iOS. please help
iOS 5.1.1 is the last version an iPad 1 can run. If you need to run iOS 6 or later, you'll need a newer iPad.
Regards. -
I have an iPad version 4.3 and I had instagram install, like I was having problem I uninstalled it, but now I can't install it again, because my iPad doesn't support the new version, is there a way that I can download instagram for this iPad?
Update your iOS.
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
Cheers, Tom -
I have an Ipod 5 and you can not listen to music unless you have headphone plugged in
I have an Ipod 5 and you can not listen to music unless you have headphones plugged in
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar -
I have 2nd generation apple tv, and this has always worked well with Lion, have now upgraded to Mountain Lion, and now can not connect to itunes, all other things work, can buy or rent films, but can not listen to my music or show photos. Can anybody help please?
I have 2nd generation apple tv, and this has always worked well with Lion, have now upgraded to Mountain Lion, and now can not connect to itunes, all other things work, can buy or rent films, but can not listen to my music or show photos. Can anybody help please?
-
I have recently upgrades to Mountain Lion and I can not get the calendar utility to come alive. Icon appears in the tast bar but the application does not launch or appear to be any where else. Any suggestion?
Did you look in the Applications folder for Calendar? If it is there, remove the item that is in the Dock and replace it by dragging the Calendar application to the Dock.
If it is not there, did you have iCal located somewhere other than the Applications folder when you upgraded? -
I have € 0.09 in my account and I can not buy anything with this value. I want to undo (give up) this value. What do I do?
Click here and request assistance.
(68968) -
I have just reinstalled Adobe Acrobat X1 and I can't save any PDF's that are emailed to me. I just get "This document could not be saves. There is a problem reading this document (21)" and then when I click OK i get "insufficient data for image" Help!
More information about this issue can be found here:
https://forums.adobe.com/thread/1672655
A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
Then download each of the individual updates and run them sequentially.
I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
Adobe Reader 11.0 - Multilingual (MUI) installer AdbeRdr11000_mui_Std
Adobe Reader 11.0.01 update - Multilingual (MUI) installer AdbeRdrUpd11001_MUI.msp
Adobe Reader 11.0.02 update - All languages AdbeRdrSecUpd11002.msp
Adobe Reader 11.0.03 update - Multilingual (MUI) installer AdbeRdrUpd11003_MUI.msp
Adobe Reader 11.0.04 update - Multilingual (MUI) installer AdbeRdrUpd11004_MUI.msp
Adobe Reader 11.0.05 security update - All languages AdbeRdrSecUpd11005.msp
Adobe Reader 11.0.06 update - Multilingual (MUI) installer AdbeRdrUpd11006_MUI.msp
Adobe Reader 11.0.07 update - Multilingual (MUI) installer AdbeRdrUpd11007_MUI.msp
Adobe Reader 11.0.08 security update - All languages AdbeRdrSecUpd11008.msp -
Hi, I got iMac and I can not open file "doc" when I have downloaded from distance learning internet page. I have office program, but when I try to open file it shows: u1-assesment.doc uses a file type that is blocked from opening in this version.?
I have tryed to change just extension from doc to docx, but it doesn't work. I am new user, please helpConsider the Mcrosoft Office:Mac forums as well:
Office for Mac forums
Here is an MS page that deals with that error message:
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/bs0811doc-use s-a-file-type-that-is-blocked-from/548ce159-8157-419e-9552-1789594fafe9 -
I just updated my iPad to iOS 5 and now can't send email- I have tried the obvious but no luck. Any suggestions?
Usually 'authentication required' means that you need to submit a username (or e-mail address) and password to the e-mail server, when sending a message. This logic is not different between Outlook and Thunderbird, and even with the latest and previous version of Thunderbird.
Of course you can try the previous version again to see if it solves the problem, although you'll be less secure because you would be missing the latest fixes.
If you'd be willing to get back to Thunderbird, say if your frustration level with your new app would increase too much, please see our article [https://support.mozilla.org/en-US/kb/cannot-send-messages cannot send messages] for further help.
In all other cases I'd appreciate it if you could mark this as answer so we know you don't need further help. -
I have a iPod touch 4th gen. And I cannot get into the Internet I get a message that say cannot connect to server. The other computer and my iPad still work with the Internet . I have reeked to reset it but that does not work. Please help me.
I do not know wat "reeked to reset" means.
Try the following:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Power off and then on your router.
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections -
I could read Burmese font with Zawgyi Font in my previous Mac Book with Lion. I have MacAir Retina display with MountainLion and could not read Burmese fonts. Font books have 3 fonts for Burmese font and all are enable. Please help
pyoneaye wrote:
Font books have 3 fonts for Burmese font and all are enable.
What are the names of those fonts? Have you downloaded and installed the special Zawgyi font?
What is it exactly that you cannot read? Can you provide the url? -
I have nikon D810 , i can not open Nef format .
LR 5.6 is needed, and your destination needs to be writable by LR, and you cannot have touched the files with Nikon software that is old, like what you might have used with your previous Nikon camera, to transfer or view the images before importing into LR.
Obsolete Nikon software changes something in the metadata of newer-camera NEFs that makes the raw files unrecognizable to Adobe software. You can correct the corruption with a utility from here:
http://owl.phy.queensu.ca/~phil/exiftool/fix_corrupted_nef.html -
Hi, I have a iPod touch 4th generation. It comes up as charging when it is plugged into the computer but it does not show in iTunes. I have everything up to date and have restarted both computer and iPod. Help please?
Try here > - http://support.apple.com/kb/TS1369.
-
I have just changed my ID password and I can not access my account.
I have just changed my ID password and I cannot access my account.
If you are referring to your user ID on your Mac: https://discussions.apple.com/thread/5478030?tstart=0
Maybe you are looking for
-
How do you transfer contacts from iPhone to macbook pro?
how do you transder contacts from the iphone to a macbook pro?
-
Tab Delimited report using DelimitedData
Hi All, While I try to generate a tab delimited report using DelimitedData, the first line appears as blank line. I can understand thats because I have removed the heading from XML Tag attribute for all the columns. But how to stop this blank line fr
-
Object Project Definition could not be created
Hi Experts, I am facing some trouble with multilevel controlling integration. Whenever I transfer a project I am getting the following error in cProjects: Costing data may not be up-to-date Display Help Error occurred in accounting - see controlling
-
To make a join query of two or more tables from database I wrote a native query and execute that query. Th entity manager is obtained from a container managed session facade. The tables at database are like table A(column1, column2, column3) table B(
-
Yesterday, my iPhone quit receiving messages from my partners phone. We are on the same account. The messages were picked up by my iPad, in the same physical space. Other people are getting her texts, and I am getting everyone else's texts. Help? Als